The article discusses the options for automatic and manual installation on Windows 7, Windows Vista, Windows XP, Windows CE for pocket computers, Windows Pocket PC 2003 Premium for pocket computers, for Palm pocket computers, for Windows Mobile 6 Professional.
This article will help you install the program on the selected platform.
Program Properties
MTS Connect Manager is designed to automatically configure your computer to access the Internet and using MTS Connect Services (3G) from MTS, Mobile GPRS-Internet, Hyper.net, hyperactive.
MTS Connect Manager.
Program description
mTS Manager will install the entire driver set on your computer, and you can enter the Internet with a modem or phone.
Automatically configures MTS Connect (3G) from MTS, Mobile GPRS-Internet, hyper.net, hyperactive.
To work, you are provided with a convenient and personal menu.
You can see the entire report on the traffic consumed and the speed of the connection.
You are available information on the amount of transmitted and received information.
In MTS Connect Manager displays the average rate of reception and transmission.
With the help of the manager, you can receive and send SMS messages directly from the computer via the connected USB mode or mobile phone.
The program displays the signal level, network coverage, battery charge and network name if you are in roaming.
To install MTS Connect manager you will need
1) computer, laptop, netbook or tablet device.
2) phone or 3g uSB modem.
3) sim-card MTS with an activated Internet tariff.
Order of focus
1) Install MTS Connect Manager on a computer, laptop, netbook or tablet device.
2) Connect the 3G USB modem or a mobile phone to a computer (or another device) with a Bluetooth, infrared connection or cable.
3) Run the Connect Manager. In the case of singers, the program will independently find a modem and install the necessary drivers that are needed to exit the device to the Internet.
4) Select from the list of services - MTS, Mobile GPRS-Internet, hyper.NET, Hyperactive required for you and connect.
Manual configuration if the automatic setting does not work correctly.
For proper self-configuration You need to do the following -
1) Connect the mobile phone to the computer using a special cable through an IR port or Bluetooth connection
2) to make computer settings according to your computer's operating system
Windows 7 settings
How to install the modem
Turn on the IR port in the phone.
.
. After the driver installation is completed, a message will appear: "The standard modem for infrared connection is set."
.
Install software For PCMCIA card.
Insert the PCMCIA card into a special "computer socket".
At the bottom of the screen, a message will appear: "Installing the device driver software."
Wait for the message: "Standard modem set".
Connect the phone and computer using a cable.
Open on your computer: Start -\u003e Control Panel -\u003e Phone and Modem.
.
.
.
Select the desired modem and proceed to setting up the modem.
If the Bluetooth modem is built-in and initial installations Bluetooth produced, then necessary:
Enable Bluetooth in the phone;
After connecting the phone and computer, select Start -\u003e Control Panel -\u003e
If used for bluetooth connections Adapter (or built-in modem is not configured), it is originally necessary to install software for Bluetooth (from the disk). Next will need:
Connect a Bluetooth adapter into a USB connector and, if necessary, continue installing the parameters. Enable Bluetooth in the phone.
Through the Bluetooth Setup Wizard, search for the necessary equipment (phone);
After the equipment is found, it must be selected and for further installation, enter confirmation codes. To do this, the same digit combinations are introduced on the computer and the phone (for example: 1234);
After connecting the phone and computer, select Start -\u003e Control Panel -\u003e Phone and Modem. The modem will be determined automatically and you can proceed to setting up the modem
How to set up modem
Open on your computer: Start -\u003e Setup -\u003e Control Panel -\u003e Phone and Modem
(If the "Phone and Modem" section is open for the first time, the "Location Information" window may appear. It is necessary to introduce " Telephone code Cities "- 495, and choose" Dialing Type "- Tone Set. Press "OK")
In the Modem Properties window, on the General tab, click the "Edit Default" button.
How to configure the connection
Open on your computer: Start -\u003e Network -\u003e "Network Management Center and common access"-\u003e" Installing or networking "-\u003e
In the window that opens, enter:
phone number:
Attention! You must enter all the characters without spaces.
Username: MTS
Password: MTS.
Password confirmation: MTS
Click "Connect" - will reflect the connection
If the connection is performed successfully, the "Connection to the Internet is ready to use" appears. Close this window.
You can proceed to the Internet review.
For additional connection settings
Open on your computer: "Start" -\u003e "Control Panel" -\u003e "Network and Shared Access Center" -\u003e "Changing Adapter Settings"
Select the previously created MTS GPRS connection Click on "Properties". In the "General" tab, turn off the "Use number set rules".
Select the tab "Network" and check that in the "Components used by this connection" list only: "Internet Protocol (TCP / IP)" and "QoS Packs Scheduler".
Select "Internet Protocol (TCP / IP)" and click "Properties". In the window that opens, check:
;
.
;
.
How to go online
Open on your computer: Start -\u003e "Control Panel" -\u003e "Network Management Center and Common Access Center", then click "Connect to the Network". Select the Created Connection and click the Connection button.
Windows Vista settings
When connected via IR port:
Turn on the IR port in the phone
Position the IR port of the phone opposite the IR port of the computer at a distance of no more than 10 cm
Wait for the IR communication icon appearing in the lower right corner of the monitor - the connection is established
At the bottom of the screen, a message will appear: "Installing the device driver software."
Upon completion of the driver installation, a message will appear: "Standard modem for infrared connection"
Start setting the modem
When connected using PCMCIA cards:
Install PCMCIA Card Software
Insert the PCMCIA card into a special "computer socket"
At the bottom of the screen, a message will appear: "Installing the device driver software."
Wait for the message: "Standard modem set"
Start setting the modem
When connected via USB, the modem cable must be set manually:
Connect the phone and computer using a cable.
Open on your computer: Start -\u003e Control Panel -\u003e Phone and Modem
In the window that opens, select the "Modems" bookmark and click the "Add ..." button
In the "Equipment Installation Wizard" window, check the field "Do not define a modem type (Select from the list)" and click "Next"
In the "Modem Setup" window, click "Install from the disk" and select from which disk (from which folder) Your modem will be installed
Specify the path to the modem driver, to do this, select "Overview" and specify the folder in which the modem driver is located.
Select the desired modem and proceed to setting up the modem
When connecting via Bluetooth, the modem must be set manually:
1. If the Bluetooth modem built-in and original Bluetooth installations are produced, then it is necessary:
a) turn on Bluetooth in the phone;
d) After connecting the phone and computer, select Start -\u003e Control Panel -\u003e Phone and Modem. The modem will be determined automatically and you can proceed to setting up the modem
2. If used to connect a Bluetooth adapter (or built-in modem is not configured), it is originally necessary to install the software for Bluetooth (from the disk). Next will need:
a) Connect the Bluetooth adapter into the USB connector and, if necessary, continue the installation of the parameters. Enable Bluetooth in the phone.
b) Through the Bluetooth Settings Wizard, search for the necessary equipment (phone);
b) After the equipment is found, it must also be selected for further installation enter confirmation codes. To do this, the same digit combinations are introduced on the computer and the phone (for example: 1234);
d) After connecting the phone and computer, select Start -\u003e Control Panel -\u003e Phone and Modem. The modem will be determined automatically and you can proceed to setting up the modem
How to set up modem
Before configuring a modem, make sure that the phone is connected to the computer.
Open on your computer: Start -\u003e Setup -\u003e Control Panel -\u003e Phone and Modem
In the window that appears, select the "Modems" tab
(If the "Phone and Modem" section is open for the first time, the "Location Information" window may appear. You need to enter a "phone code" - 495, and select "Dialing Type" - Tone Set. Press "OK")
Select your installed modem and click the "Properties" button
In the Modem Properties window, on the "General" tab, click the "Edit Settings" button.
Next, select the tab " Extra options Communications.
In field " Additional teams Initialization "Push the modem initialization string:
AT + CGDCont \u003d 1, »IP», »internet.mts.ru»
Attention! You must enter all the characters without spaces.
7. Click "OK" - modem configured, proceed to configure the connection
How to configure the connection
Before configuring the connection, make sure that the phone is connected to the computer.
Open on your computer: Start -\u003e Network -\u003e "Network and Shared Access Center" -\u003e "Installing or Network Installation" -\u003e "Telephone Connection Settings Connecting the Internet through telephone network»
In the "Telephone Connection Setup" window, specify the modem through which the connection will be made:
In the window that opens, enter:
New Connection Name: MTS GPRS
phone number:
If you have a brand phone: SonyEricsson, Motorola, Pantech, Nokia, LG: * 99 #
username: MTS
Password: MTS.
Password confirmation: MTS
Click "Connect" - reflect the connection
If the connection is performed successfully, then it is proposed to start a review of the Internet.
To do this, in the "Setup Network Placement" window, you must select the location for the MTS-GPRS network (optional)
For additional settings Connections
Open on your computer: "Start" -\u003e "Network" -\u003e "Network and Common Access Center"
Select the previously created MTS GPRS connection Click on "Properties"
In the "General" tab, turn off the "Use number" rules.
Select the tab "Network" and check to:
In the "Components used by this Connection" list, only were selected: "Internet Protocol (TCP / IP)" and "QoS Package Planner"
Select "Internet Protocol (TCP / IP)" and click "Properties"
In the window that opens, check:
Get an IP address automatically
Get the DNS server address automatically
Click the "Advanced ..." button, and in a new window:
Put the "Tick" on the "Use the main gateway for a remote network" item
Disconnect the "Use IP Coupling" option
Click "OK" - the connection is created, try to enter the Internet
How to go online
Connect the phone with a computer
Open on your computer: Start -\u003e Connections -\u003e Control Panel -\u003e MTS GPRS
Windows XP Settings
How to install the modem
When connected via IR port:
Turn on the IR port in the phone
Position the IR port of the phone opposite the IR port of the computer at a distance of no more than 10 cm
Wait for the IR communication icon appearing in the lower right corner of the monitor - the connection is established
Then the window appears with the name of the phone - the modem is set.
Start setting the modem
When connected using PCMCIA cards:
Insert the SIM card into a special "computer socket"
Wait for the message about the successful installation of the "Standard PCMCIA-Modem"
Start setting the modem
When connected via cable or Bluetooth, the modem must be set manually:
Connect the phone and computer using a cable or turn on the Bluetooth in the phone.
Open on your computer: Start -\u003e Setup -\u003e Control Panel -\u003e Phone and Modem
In the window that opens, select the "Modems" bookmark and click the "Add ..." button
In the "Equipment Installation Wizard" window, check the field "Do not define a modem type (Select from the list)" and click "Next"
In the "Modem Setup" window, click "Install from the disk" and select from which disk (from which folder) Your modem will be installed
In the next window, select the desired modem (Your phone model) and click "Next"
Specify which port to install a modem (for example, COM 1), click "Next"
After warning about the incompatibility of the operating system and the modem, click "Continue anyway"
Wait for the message "Modem successfully installed", click "Finish" and proceed to configure the modem
How to set up modem
Before configuring a modem, make sure that the phone is connected to the computer.
Open on your computer: Start -\u003e Setup -\u003e Control Panel -\u003e Phone and Modem
In the window that appears, select the "Modems" tab
Select your installed modem and click the Properties button.
In the Modem Properties window, select the "Advanced Communication Options" bookmark
In the "Advanced Initialization Commands" field, give the modem initialization string:
AT + CGDCont \u003d 1, »IP», »internet.mts.ru»
Attention! You must enter all the characters without spaces.
Click "OK" - the modem configured, proceed to setting up the connection
How to configure the connection
Before configuring the connection, make sure that the phone is connected to the computer.
Open on your computer: Start -\u003e Setup -\u003e Control Panel -\u003e Network connections
Select "Creating a New Connection" - "Network Connection Wizard" will open, click "Next"
Check "Connect to the Internet" and click "Next"
Select Manual Connection and click "Next"
In the window that opens, check "through the usual modem" and click "Next"
From the list, select your installed modem and click "Next"
In the window that opens, enter:
New Connection Name: MTS GPRS
phone number:
If you have a brand phone: Alcatel, Siemens, Panasonic: * 99 *** 1 #
If you have a brand phone: samsung: * 99 ** 1 * 1 #
Attention! You must enter all the characters without spaces.
username: MTS
Password: MTS.
Password confirmation: MTS
9. Open on your computer: Start -\u003e Setup -\u003e Control Panel -\u003e Network Connections -\u003e MTSGPRS
10. In the "Connection to MTSGPRS" window, click the Properties button.
11. In the "General" tab, disable "Use the number set rules"
12. Select the "Network" bookmark and check to:
In the "Type of Remote Access Plugged Server" line, it was selected:
"PPP: Windows 95/98 / NT4 / 2000, Internet"
In the "Components used by this connection" list, only were selected:
"Internet Protocol (TCP / IP)" and "QoS Package Planner"
13. Select "Internet Protocol (TCP / IP)" and click "Properties"
14. In the window that opens, check:
Get an IP address automatically
Get the DNS server address automatically
15. Click the "Advanced ..." button, and in a new window:
Put the "Tick" on the "Use the main gateway for a remote network" item
Disconnect the "Use IP Coupling" option
16. Click "OK" - the connection is created, try to enter the Internet
How to go online
Connect the phone with a computer
Open on your computer: Start -\u003e Setup -\u003e Control Panel -\u003e Network Connections -\u003e MTSGPRS
In the MTSGPRS Connection window, click the Call button.
Wait for the "two computers" icon appears on the taskbar - the connection is installed. If you want to break the connection, right-click on the "Two Computers" icon and select "Disconnect".
Recommendations for setup Windows XP to work on the 3G network
To optimize data transmission speed in the 3G network, it is recommended to configure the 'TCPWindowsize' parameter in the Windows XP OS registry. To do this, you can use one of two ways:
1. Download the file to your computer and run it, after which you restart the computer.
2. Edit the registry manually. Only for experienced users!
Make changes to the registry manually by performing the following sequence of actions:
1. In the "Start" menu, select "Run", dial the regedit command and click "OK"
2. Go to the HKEY_LOCAL_MACHINE'SYSTEM'CURRENTCONLSET'SERVICES'TCPIP'Parameters registry branch
3. In the settings window, click the right mouse button, select "Create -\u003e DWORD Parameter"
4. Enter the TCPWindowsize parameter name
5. Click the right mouse button on the created parameter, select "Change"
6. Enter the hexadecimal value of FAF0, then click "OK"
7. Make sure the string is created.
TCPWindowsize reg_dword 0x0000FAF0.
8. Overload a computer.
Windows CE settings for pocket computers
How to configure your computer
1. Connect the phone with a computer using an IR port, Bluetooth or cable
2. Open on the computer: "Start" -\u003e "Settings" -\u003e Connections
3. Select the "DIALING LOCATIONS" tab and click the New button.
4. In the window that opens, specify "New Location Name: Mobile" and click "OK"
5. In the next window, select "Tone Dialing", Clean the fields "Area Code" and "Country Code"
6. Select "DIALING PATTERNS", remove all codes except "G" or "G" and click "OK"
7. Open the Connections tab and click the "Modify" button.
8. On the "Modem" tab, click "New ..."
9. In the "Make New Connection" window, ENTER NAME FOR THE CONNECTION. Enter MTS GPRS
10. In the "Select A Modem" field, select "Generic Irda Modem, Bluetooth Connection" (if the device -PutOTH) or "INTERNAL MODEM" (sensible)
11. In the Baud Rate field, select the speed of 57600 or 115200 bits / s and click the "Advanced" button
12. In the window that opens, click the "Port Settings" tab and check to:
Data Bits - 8
Party - None
Stop Bits - 1
Flow Control - Hardwar
Attention! Make sure all the Terminal partitions are disabled
13. Open the TCP / IP tab, turn on the automatic assignment of the IP address, and the "Software Compression" and "IP-Header Compression" items disconnect
14. On the Name Servers tab, select "Use Server-Assigned Addresses" and click "OK"
15. On the page where you specified the connection name - MTS GPRS, click "Next"
16. In the "My Connection" window, type:
In the PHONE NUMBER field:
If you have a brand phone: Ericsson, SonyEricsson, Motorola, Pantech, Nokia, LG: * 99 #
If you have a brand phone: Alcatel, Siemens, Panasonic: * 99 *** 1 #
If you have a brand phone: samsung: * 99 ** 1 * 1 #
Field "Extra Dial-String Modem Commands" Enter: + CGDCont \u003d 1, »IP», »Internet.mts.ru» or AT + CGDCont \u003d 1, »IP», »Internet.mts.ru»
Attention! You must enter all the characters without spaces.
17. Press the "FINISH" button - the computer is configured, try to enter the Internet.
How to go online
1. Connect the phone with the computer
2. Open on your computer: "Start" -\u003e "Settings" -\u003e "Connections" -\u003e MTS GPRS
3. Select the "Connect" item and in the new window, enter:
Username: MTS
Password: MTS.
4. Press "CONNECT"
5. Wait for the "Two Arrows" icon at the top of the screen - the connection is established
If you want to break the connection, click on the "Two Arrogors" icon and select "Disconnect".
Windows Pocket PC 2003 Premium Settings for Pocket Computers
How to configure a computer when connecting the phone via IR port
Turn on the IR port in the phone
Position the IR port of the phone opposite the IR port of the computer at a distance of no more than 10 cm
Open on your computer: Start -\u003e Setup -\u003e Connections
In the "Connections" window, select the "Advanced" tab, and in the next window - "Select Networks"
Select "Create" and in the "Provider" window Enter the name: IR connections
On the Proxy Server Parameters tab, put the "tick" in the "This Network is connected to the Internet" field, leave the remaining fields empty
Select the "Modems" tab and click the Create button.
In the New Connection window, enter the connection name: MTS GPRS-IR, select the modem: Generic IRDA and click "Next"
In the next window, enter the phone number:
If you have a brand phone: Ericsson, SonyEricsson, Motorola, Pantech, Nokia, LG: * 99 #
If you have a brand phone: Alcatel, Siemens, Panasonic: * 99 *** 1 #
If you have a brand phone: samsung: * 99 ** 1 * 1 # and open the "Use set rules" link
Attention! You must enter all the characters without spaces.
10. In the window that opens, disconnect the "Rules" item, click "OK" and the next window click "Next"
11. In a new window, check the parameters:
User: MTS.
Password: MTS.
Leave a blank domain field
12. Click the "Advanced" button and set the following parameters:
Speed: 115200 or 57600
Remove the "tick" in the "Wait Signal" field (not for all phones)
Attention! You must enter all the characters without spaces.
13. Select the Port Parameters tab and check the following options:
Data: 8.
Parity: No.
Stop bits: 1
Control: Hardware
14. Open the TCP / IP tab, turn on the "IP address is assigned to the server" item, and the option "Use Slip", "Software Compression" and "Compression IP Headers" Disconnect
15. On the Servers tab, enable the "Address server" option, Values \u200b\u200bin the WINS fields. Leave zero
16. Click "OK", and then "Done" - the computer is configured, try to enter the Internet
How to configure your computer when connecting the phone via Bluetooth
Turn on Bluetooth in the phone
Open on your computer: Start -\u003e Setup -\u003e Systems -\u003e Bluetooth
In the "Bluetooth" window, select the "Accessibility" tab and set:
Name: Any Name of Your Computer
Install the checkbox in the "Other devices can connect"
Select "Only Related Devices"
Remove the checkbox "Other devices can see"
4. On the tab " Remote access to the network ":
Turn on the option: "Enable Service", "Authorization is required" and "Passkey)" required (passkey)
In the "Speed" field, set 57600 or 115200
In the "Management" paragraph, select "Hardware (RTS / CTS)"
5. Close the Bluetooth Setup window
6. Open on your computer: Start -\u003e Setup -\u003e System -\u003e Bluetooth
7. In the window that opens, select "Set up a connection in the manager"
8. In the "Settings Wizard", select "New" and in the new window, select "Internet via the phone"
9. In the Bluetooth Connection Wizard window, select your phone model and click "Next"
10. Configure the Bluetooth connection according to the instructions of your phone
11. In the next window, select your phone model
12. In a new window, specify the "key" - any numbers (do not specify letters!), Enter the same numbers in the phone menu, click "Next"
13. In the next window, check the box in the "Use as standard Internet connection" field, and in the phone menu, select your computer and click "Next"
14. In the "Bluetooth Connection Wizard" window, enter:
Connection Name: MTS GPRS-BT
Country code: 7
City code: 495
phone number:
If you have a brand phone: Ericsson, SonyEricsson, Motorola, Pantech, Nokia, LG: * 99 #
If you have a brand phone: Alcatel, Siemens, Panasonic: * 99 *** 1 #
If you have a brand phone: samsung: * 99 ** 1 * 1 #
Attention! You must enter all the characters without spaces.
16. Select the connection icon (two arrows), in the "Connection" window, select "Settings"
17. In the "Connections" window, select "Control of existing connections"
18. In the Bluetooth Settings window, select your connection - MTS GPRS-BT and click "Edit ..."
19. In the MTS GPRS-BT window, select the "Bluetooth Dialup Modem" modem and click "Next"
20. Check that there is no checkmark in the "Rules" field, and click "Next"
21. In the next window, enter:
User: MTS.
Password: MTS.
22. Leave the "Domain" empty field, click "Advanced ..." and set:
Speed: 115200 or 57600
Remove the checkbox from the "wait for a set signal"
In the "Additional Set Commands" field, enter: + CGDCont \u003d 1, »IP», »Internet.mts.ru» or at + CGDCont \u003d 1, »IP», »Internet.mts.ru»
Attention! You must enter all the characters without spaces.
23. Select the Port Parameters tab and set:
Data: 8.
Parity: No.
Stop bits: 1
Control: Hardware
Attention! Make sure all the terminal section are disabled
24. Open the TCP / IP tab, turn on the "IP address is assigned by the server" item, and the option "Use Slip", "Software Compress" and "Compression IP Headers" Disconnect
25. On the Servers tab, enable the "Address server assigned" option, the values \u200b\u200bin the WINS fields leave zero
26. Click "OK", and then "Finish" - the computer is configured, try to enter the Internet
How to go online
Connect the phone with a computer
Click on the connection icon (two counter arrows with a cross) and select link called Connection - MTS GPRS-BT
Wait for the arrows to take a motionless look without a cross - the connection is established
If you want to break the connection, click on the "Two Arrogors" icon and select "Disable".
Settings for Palm Pocket Computers
First try configuring your computer on the example of the Palm OS setting. If you fail to enter the Internet (there will be an error about incorrectly dialed number or Error: PPP Timeout), select the Palm VS setup method.
In the case of the Bluetooth connected module (for example, Compact Flash Bluetooh Adapter), you may need to install the external device drivers.
Palm Os.
How to set up modem
In the "Edit" window in the "Name" line, enter your connection name: GPRS-IR-MODEM-57600
Next, from the drop-down lists, select:
In the "Connection Method" field: Ircomm to Modem
In the field "DIALING": TOUCHTONE
In the field "VOLUME": OFF
6. Press the "Details" button: In the "Speed" field, set the value 57600 or 115200, and select Automatic or ON in the "FlowCTL" field
7. Close the "Details" window by pressing the "OK" button
8. In the "Init String" field, enter:
+ CGDCont \u003d 1, "IP", "internet.mts.ru" or
AT + CGDCont \u003d 1, »IP», »internet.mts.ru»
Attention! You must enter all the characters without spaces.
9. Click "OK" - modem configured, proceed to setting up the connection
How to configure the connection
On the computer, open the "House" icon and from the list, select "Prefs"
In a new window, fill in the fields:
SERVICE: MTS-GPRS
User Name: MTS
Password: MTS.
Phone:
If you have a brand phone: Ericsson, SonyEricsson, Motorola, Pantech, Nokia, LG: * 99 #
If you have a brand phone: Alcatel, Siemens, Panasonic: * 99 *** 1 #
If you have a brand phone: samsung: * 99 ** 1 * 1 #
Attention! You must enter all the characters without spaces.
5. Remove the stamp from the points: "Dial Prefix", "Disable Call Waiting" and "Use Calling Card"
6. Press the "Details" button and set the following parameters:
Connection Type: PPP
Idle Timeout: Power Off
Mark the "checkmark" field "querydns" and "iPaddress"
How to go online
Connect the phone with a computer
In the Preferences window, click on the triangular arrow in the upper right corner select "Network"
Press the "Connect" button
Palm VX.
How to set up modem
On the computer, open the "House" icon and from the list, select "Prefs"
In the Preferences window, click on the triangular arrow in the upper right corner and select "Connection"
In the list selection list (via a modem, via IR communications, etc.), click "New"
In the window that opens in the "Name" line, enter the name of your connection: IR-PC-57600, and in the Connection Method field, select Ircomm to PC
Click the "Details" button: In the "Speed" field, set the value 57600 or 115200, and in the "FlowCTL" field, select Automatic or ON
Click "OK" - the modem configured, proceed to setting up the connection
How to configure the connection
On the computer, open the "House" icon and from the list, select "Prefs"
In the Preferences window, click on the triangular arrow in the upper right corner and select Network
Click "Menu" and select "New"
In a new window, fill in the fields:
SERVICE: MTS-GPRS
User Name: MTS
Password: MTS.
Connection: GPRS-IR-MODEM-57600 (RanesozdanConnection)
Phone:
If you have a brand phone: Ericsson, SonyEricsson, Motorola, Pantech, Nokia, LG: * 99 #
If you have a brand phone: Alcatel, Siemens, Panasonic: * 99 *** 1 #
If you have a brand phone: samsung: * 99 ** 1 * 1 #
Attention! You must enter all the characters without spaces.
5. Press the "Details" button and set the following parameters:
Connection Type: PPP
Idle Timeout: Power Off
Mark the "checkbox" field "Query DNS" and "IP Address"
6. Press the "Script" button and in the Log In Script window:
Send: ATZ.
SEND CR
SEND: AT + CGDCont \u003d 1, »IP», »Internet.mts.ru»
SEND CR
Send:
If you have a brand phone: Ericsson, SonyEricsson, Motorola, Pantech, Nokia, LG: ATD * 99 #
If you have a brand phone: Alcatel, Siemens, Panasonic: ATD * 99 *** 1 #
If you have a brand phone: samsung: ATD * 99 ** 1 * 1 #
SEND CR
End.
7. Click "OK" - connection is configured, try to enter the Internet
How to go online
Connect the phone with a computer
In the Preferences window, click on the triangular arrow in the upper right corner and select Network
Press the "Connect" button
In the "Service Connection Progress" window, the connection status will be shown, wait for the inscription - "Established" - the connection is established
If you want to break the connection, click the "DISCONNECT" button in the Network window.
Settings for Windows Mobile 6 Professional
Settings for access to Web sites via GPRS
Click Start (Start) to enter the menu. Select Settings and select Connections tab. Select the Connections icon (Connections) and follow these settings:
In the section My Internet provider ("My ISP"):
You select Add New Connection via Modem ("Add New Modem Connection")
Enter the connection name: MTS.
Select A Modem: Cellular Line (GPRS)
Click Next (NEXT) on the display.
Access Point Name (Access Point Name): internet.mts.ru<при использовании Real IP: realip.msk>; Click Next on the display.
User Name (User Name): MTS;
Password (password): MTS;
Domain (Domain): Not filled
Press the Advanced key (Advanced) on the display.
Highlight the TCP / IP tab and execute the following settings:
The IP address assigns the server (USE Server-AssinGed IP Address): Mix the point
Use Software Compression Software: Remove the "tick"
HEADER COMPRESSIONS compression: Remove the "Tick" highlight the Servers bookmark and follow these settings:
Addresses are assigned to the server (USE Server-Assigned Addresses) Mix the point
Click OK on the display. Click Finish (Done) on display
To access the Internet
Click Start (Start) to enter the menu. Select Settings and select Connections Bookmark (Connections). Select Connections icon (Connections). In the My ISP Internet Web section, select Existing Connections (Manage Existing Connections) Press and hold on MTS connections and to the submenu that appears, select Connect (Connect). After that, you can open Internet Explorer.
Settings for access to Web sites through "Mobile Office"
Click Start to enter the menu. Select Settings. Select the Connection tab. Select the connection icon and execute the following settings: In the My Internet provider, select Add New Connection via Modem
Enter the connection name: MTS;
Select a modem: Cell line;
Click Finish (FINISH)
To access the Internet
Click Start to enter the menu. Select Settings and select the Connection tab. Select the connection icon:
In the My Internet provider section, select Control Existing Connections. Press and hold on MTS connections and to the submenu that appears, select Connect. After that, you can open Internet Explorer.
Download MTS Connect Manager for a computer on Windows 10 - just such advice you will receive from employees of the company, if you buy a SIM card and connect mobile Internet from this cellular operator. The utility is official tool MTS, thanks to which you can configure access to the mobile Internet on your device on Windows 10. Some craftsmen set up the Internet and without this application, but the process with it is much easier, and more opportunities.
Utility for configuring mobile Internet on windows 10
This is an indispensable companion of all PC users who enter the Internet with a 3G modem from MTS. If you buy the same modem, then in his manual you will find the advice - download the manager and configure the connection with it. This utility is also a convenient tool to connect the Internet on the computer for the first time, as it includes the necessary drivers. It turns out that one utility allows:- Set up access to the Internet;
- Organize a connection to the mobile Internet;
- Allows you to monitor the operation of the network;
If you just bought a modem - then you already need this utility, because It includes the necessary components. You need to connect a modem to a computer, and then install and run this program. Next, you do not have to install anything or customize. You do not even have to set the settings of your account, except for the login and password that you will be given in the office. After all the procedures, access to the Internet will appear on your computer. And you don't even need to download
Program " MTS Connect Manager"Automatically configures your computer to access the Internet using mobile GPRS-Internet services, hyper.net, hyperactive and MTS Connect 3G from MTS.
The MTS Connect Manager program on your computer will be able to:
Install all the necessary drivers for Internet access through your phone / modem;
Produce automatic setting Mobile services GPRS-Internet, hyper.net, hyperactive and MTS Connect 3G;
Provide an Internet connection through a convenient user menu;
Conduct measurement of speed and volume of accepted and transmitted data;
Send and receive SMS messages directly from the computer through the connected mobile phone;
Display the level of the network coverage, battery charge, network name when working in roaming.
For Internet access using MTS Connect Manager, you need:
Mobile phone or modem of the GPRS / EDGE / CDMA standard;
MTS SIM card with activated service;
personal Computer (PC) with Windows OS and the installed program;
Sequence of actions when using MTS Connect Manager:
Install MTS Connect Manager on PC;
Connect a mobile phone / modem to a computer using a cable, Bluetooth or infrared connection;
Run MTS Connect Manager (when you first start the program will find a connected device and install the driver and makes necessary settings for connecting to the Internet);
Select a service from the list you want to use to access the Internet (mobile GPRS-Internet, hyper.net, hyperactive and MTS Connect 3G);
Press the Connect button.
Connect manager is quickly installed and no settings you need to immediately go online.
Screenshots
Platform / OS: Windows 2000 / XP / Vista / 7
Developer: MTS.
Year of issue: 2012
Activation: not required
Interface language: Russian
File format: RAR
The size: 49 MB.
Download MTS Connect Manager NEW V25.05.12 (2012 / RUS)
Among modern users Laptops have many young people working using a USB modem, having it always with you as a small pocket flash drive. In part, therefore, today it is very popular to find and download a program for MTS modem, always having it on a USB drive and without obliging yourself to carry the disk with drivers. Unfortunately, find on the field modern Internet A set of supporting drivers is a whole problem, not to mention all other nuances related, for example, to compliance with the requirements of the operating system of the seventh or eighth version. Well, in order not to be an unfounded teller, I will give a specific example an application that guarantees the user after the installation made, the highest ease of use without any problems.
So, if you plan to work on the Internet without any restrictions, you are simply obliged to download a MTS modem program that automatically configuring network access with connecting all existing services. Believe me, there is nothing difficult in working with this application and can not be. The main thing is to correctly pick up a program that is suitable for MTS modem, and not another similar to the functionality of the device. Be careful before loading and running the installer to the marking of your available USB modem. Accordingly, if you own a modem device for high-speed connection to the Internet of a specific brand, the device code must be taken into account in a strictly mandatory manner.
Download free program for MTS Modem
We also want to note for the newly minted users, that downloading to the computer for MTS modem setting the program functionality, guarantees automatic setting this device With minimized costs of your precious time. Agree, this is a very important and sign advantage for young users who do not make experience in customer settings. You, of course, can make custom settings and independently with manual indication, such as provider, dynamic IP address, and so on, and the like.
By the way, creating a connection due to a separate distribution program for MTS modem connected to a laptop, independently brings maximum benefit, fully and fully justifying the user's waiting. However, you can appreciate all this that you can well independently, without relying on someone's third-party consultation.
Regarding all the other advantages advertised and recommended for downloading a program specifically designed for MTS modems, you will appreciate them, taking advantage of my recommendation again and downloading the distribution, using any mirror below the final paragraph.
Good day, dear readers.
With development mobile technology Services provided are constantly improved. Thus, portable modems that allow you to get into the Internet almost anywhere are very popular. At the same time, they provide a good network speed. But sometimes there are situations when after some changes in the operating system there are problems with the work of this equipment. And therefore many wonder how to update the modem driver? And this is no accident, because this way can be returned to our places. I will tell useful information Regarding this area.
Most of the USB modems allowing you to enter the Internet through 3G or GPRS, has its own memory, though small. Usually there must be drivers that are necessary for the device. To reinstall the corresponding software, you need to perform a number of actions:
In addition, often with such devices also come free small diskson which and are provided required programs. If not, go to the manufacturer's website and are looking for the necessary files.
MTS update( )
To update the software from the MTS company, perform a chain of action:
Sometimes after updating the drivers on MTS modem, connections may arise. This is solved like this:
Yota.( )
Immediately need to say that the basic software for mobile device from yota is already provided in recent versions operating systems from Microsoft. Even in Windows XP, the truth is only SP3. If suddenly the device does not work for some reason, you need to check exactly how the computer took it:
Everything should work fine.
Megaphone( )
In general, the procedure for reinstalling drivers is exactly the same as in the case of MTS. So, update the software on the MegaFon modem simply - we delete through " Device Manager»Equipment and all accompanying software from a computer. We reboot and re-plug. Everything should be installed in automatic mode.
