How to switch to Recovery mode on different Android devices. Types of menu recovery and how to enable them

The Recovery menu is a special service mode mobile system Android. Present on all smartphones and tablets. It is used to start if the user wants to quickly clear all information in the device, restore factory settings, change the firmware, and also in some other situations.

In the event that Recovery on the device has never been changed, it is called STOCK. If this menu has been stitched, then it is already called CUSTOM.

Among the custom recovery, CWM and TWRP are considered the most popular due to their functionality.

To enter the recovery menu on a switched off device, a special combination is used pressing HOME, POWER, VOLUME + and VOLUME-. Moreover, on different devices you need to use different of these buttons.

Below in the article you can find a way for your device. By the way, there are also special programs to launch this menu. One of the most convenient, called Quick Boot, we will consider here.

A universal way to enter recovery on Android

Nowadays, the same key combination is suitable for many models from different manufacturers. Therefore, it makes sense to consider this method first. Perhaps it can be called a universal way.

The procedure is as follows:

Turn off your Android smartphone or tablet.
Press the power button and then short press the volume up knob.
The device will go to Recovery.

With the device turned on, hold down the on / off button for a few seconds.
A menu with some parameters will be displayed on the screen, where there may be a "Go to Recovery" button or something like that.

If on your Android these key combinations do not lead to the desired result, then see below all the possible combinations specifically for each popular line of devices. For all other devices, one of the above described universal options is suitable.

Recovery for Samsung

If you have a device from the popular Galaxy line of Samsung Electronics, then one of the following is suitable for you. following ways. Keep in mind that all key combinations apply when your smartphone or tablet is turned off.

Methods:

Recovery for Sony Xperia

If you are the owner of a Sony Xperia line device, then turn off the device, and then turn on and When the indicator lights up or the SONY logo appears on the screen, press the Volume Down or Volume Up key. On some models, the logo is pressed.

This option is also possible: turn off the device, hold down the power button and wait for a few vibrations, then release the ON / OFF button and quickly hold down "Volume +".

Recovery for HTC

First of all, the user needs to switch to Bootloader mode. In most cases, this is done by removing and reinstalling the battery:

Recovery on Nexus

With the device turned off, hold down the following key combination: volume down and on / off (power).

Now find the Recovery item and go to it by pressing the power button.

We go into the recovery using the Quick Boot application

There are also special programs that help you switch to Recovery with one touch of your finger. The procedure in this case is not at all complicated. Just open the Play Store, search for the application and install it. I decided to introduce you to one of the most convenient ones called Quick Boot.

After installation and launch, select the Recovery item in the program menu.

The device will successfully reboot into the mode Recovery Recovery, and you can continue working with the sections that you need, depending on the task at hand. For example, if you need to restore all factory settings on your device, you will work with the Wipe data section ( Factory reset), the Apply update from section is used to update the firmware, etc.

How to work in the recovery menu

Navigation here is done by pressing the side volume up and down keys. To confirm the selected option, the on / off button is briefly pressed.

Tip: if you are not sure about your actions, it is better not to experiment in this menu, since the consequences will be irreversible. Android mobile devices, unlike PCs, will not issue warnings about possible problems.

What's on the Recovery menu

This menu contains the following sections:

Reboot system. When you click on this item, the Android will restart in normal mode. In case you just entered Recovery out of curiosity, use this command to exit.
Apply update from. This section is for updating installed firmware from an existing distribution, installing patches, etc. this section you can choose the type of update from the following list:
1) Internal storage- from an existing version, including system memory, file storage, memory card;
2) External storage - from some external device;
3) Cache - from the internal system cache.
Backup / Restore. Each device stores backup image systems. When you click on this item, recovery from this image will be launched. That is, the system will be completely updated to the state in which it was after the purchase.
Wipe cache partition. The contents of the system cache will be completely deleted.
Wipe data | Factory reset. Selecting this item will allow you to reset all settings made by the user for the entire period of operation. The device will completely revert to the preset factory settings. Please note that during the reset process, all information entered and saved by the user will be lost. Including all files, folders, music, videos, etc. However, the performance of the tablet usually increases by an order of magnitude after a factory reset.

If you have ever tried to flash either or an Android tablet on your own, you probably came across the concept of "Recovery". Today we will talk in detail about what this thing is, why it is needed at all, and, of course, how to enter it.

What is Recovery

Recovery mode is a special boot mode for android devices that allows you to do a full factory reset operating system, reflash the device, make a backup copy of the entire system or its individual partitions (just like restoring these partitions later) and some other things. At the same time, for this mode to work, the operability of the operating system itself is completely optional. That is why the recovery menu is often accessed when the device no longer works in normal mode. And that is why this mode is called “recovery”.

How to enter Recovery

To boot recovery, the hardware buttons of the device are usually used. The most common combinations are:

However, some manufacturers may come up with “something like that”, so you have to search and experiment.

If everything is done correctly, a lying robot will appear on the device screen, on top of which there will be a menu with commands.

Another way to download recovery is special applications, with which you can reboot your smartphone or tablet into recovery mode directly from the operating system itself (for example, Reboot menu). However, keep in mind that these applications require a.

Navigation in recovery mode is carried out mainly using the volume buttons, and selection using the power button. There are also devices in which only the volume down button is used for navigation, and the volume up button is used to confirm the selection.

To all of the above, it is necessary to add one important detail. The functionality of the recovery mode itself is by no means universal, and can be quite different depending on the device. Particularly distinguished in this sense are the “noname” tablets from China and some B-brands, in the recovery of which there is no list of commands at all.

Recovery mode (aka recovery) on Android is a special hidden menu and is available on any smartphone Samsung Galaxy. It is a great tool that can be used to erase data, factory reset, format system partition, installing a custom kernel, new firmware and many other things that should allow you to improve your smartphone and its system.

The recovery mode can be stock or custom. Stock Recovery Mode is the first and original option that is installed initially on a smartphone and it is with it that you can work immediately after purchase. This mode works on a stock smartphone or already on a rooted one, but not on a Galaxy smartphone that is flashed with custom firmware.

Custom Recovery Mode can be installed only after obtaining root rights on the smartphone. There are two of the most popular custom recovery for Galaxy smartphones ClockworkMod - CWM and TWRP - Team Win Recovery Project. They are both very similar in their capabilities and you can get the same functionality in either of them. Here's how to download Samsung Galaxy smartphone in recovery mode.

How to boot a Samsung Galaxy smartphone into stock / CWM / TWRP recovery mode:

Turn off the device completely.
Press and hold the volume up buttons, Home button and the power button at the same time.
Release the buttons when the smartphone screen turns on and you see the stock / CWM / TWRP recovery logo.

After you release the buttons, you will already see the main menu of the recovery mode. Here you can set desired parameters settings or perform important actions with the system, including installing custom or other stock firmware.

To boot in normal mode, you need to return to the main screen of the recovery mode and select the "Reboot system" item.

06.08.2018

How to enter Recovery? Many Android upgrade and firmware instructions require you to perform actions from the Recovery menu. What this mode is and what it is for, you will learn from this article. What is Recovery? Recovery is a special Android boot mode in which:

perform a full Android data reset
flashing a smartphone
get Root rights

How to enter Recovery? The Recovery menu is usually found in all Samsung smartphones and tablets, but absent in other brands of Android smartphones, but it can be easily added by flashing this section to your Android device.

Connect Android to PC and type the command adb reboot recovery

Example in ADB RUN:

From the command line - Method 3

As practice shows, on some devices (and more specifically in LG), it is not possible to translate an Android device using the command adb reboot recovery , in this case it is worth using the following command

adb shell

reboot recovery

There is also a command to switch to Recovery mode for LG, you need to enter the command

adb reboot --bnr_recovery

After that, the device will start to reboot in a few seconds!

A universal method from an installed terminal with Root rights

(Asus, HTC, Lenovo, Sony, HTC, LG, Samsung and others, provided that recovery is available in this device)

Download and install the Terminal application from the Google Play store;
Go to the newly installed application;
Type the following commands:
su
reboot recovery
After a couple of seconds, Android will start to reboot.

Recovery menu controls

Volume keys Up and down- move through the menu Key On off- selection of an item in the menu. There are some Android devices in which no keyvolume, in this case you will need OTG cable and computer mouse... Once you start putting Android into Recovery mode, plug in your mouse.

This concludes the article. If you do not know how to use and what items in Recovery are responsible for, then read the article

If there were errors while installing the update - Status CWM

That's all! Nothing complicated! Read more different articles and instructions in the section. Stay with the site, it will be even more interesting further!

The Recovery menu is a special service mode of the Android mobile system. Present on all smartphones and tablets. It is used to start if the user wants to quickly clear all information in the device, restore factory settings, change the firmware, and also in some other situations.

In the event that Recovery on the device has never been changed, it is called STOCK. If this menu has been stitched, then it is already called CUSTOM.

Among the custom recovery, CWM and TWRP are considered the most popular due to their functionality.

To enter the menu recovery on a turned off device, a special combination of pressing HOME, POWER, VOLUME + and VOLUME- is used. In this case, on different devices, you need to use different of these buttons.

Below in the article you can find a way for your device. By the way, there are also special programs for launching this menu. One of the most convenient, called Quick Boot, we will consider here.

A universal way to enter recovery on Android

Nowadays, the same key combination is suitable for many models from different manufacturers. Therefore, it makes sense to consider this method first. Perhaps it can be called a universal way.

The procedure is as follows:

Turn off your Android smartphone or tablet.
Press the power button and then short press the volume up knob.
The device will go to Recovery.

With the device turned on, hold down the on / off button for a few seconds.
A menu with some parameters will be displayed on the screen, where there may be a "Go to Recovery" button or something like that.

Recovery for Samsung

If you have a device from the popular Galaxy line of Samsung Electronics, then one of the following methods will suit you. Keep in mind that all key combinations apply when your smartphone or tablet is turned off.

Recovery for Sony Xperia

This option is also possible: turn off the device, hold down the power button and wait for a few vibrations, then release the ON / OFF button and quickly hold down "Volume +".

Recovery for HTC

First of all, the user needs to switch to Bootloader mode. In most cases, this is done by removing and reinstalling the battery:

Recovery on Nexus

With the device turned off, hold down the following key combination: volume down and on / off (power).

Now find the Recovery item and go to it by pressing the power button.

We go into the recovery using the Quick Boot application

After installation and launch, select the Recovery item in the program menu.

The device will successfully reboot into Recovery mode, and you will be able to continue working with the partitions that you need depending on the task at hand. For example, if you need to restore all factory settings on your device, you will work with the Wipe data (Factory reset) section, the Apply update from section is used to update the firmware, etc.

How to work in the recovery menu

Navigation here is done by pressing the side volume up and down keys. To confirm the selected option, the on / off button is briefly pressed.

Tip: if you are not sure of your actions, it is better not to experiment in this menu, as the consequences will be irreversible. Android mobile devices, unlike PCs, will not issue warnings about possible problems.

What's on the Recovery menu

This menu contains the following sections:

Reboot system. When you click on this item, the Android will restart in normal mode. In case you just entered Recovery out of curiosity, use this command to exit.
Apply update from. This section is used to update the installed firmware from the existing distribution kit, install patches, etc. In this section, you can select the type of update from the following list:
1) Internal storage - from an existing version, including system memory, file storage, memory card;
2) External storage - from some external device;
3) Cache - from the internal system cache.
Backup / Restore. A backup image of the system is stored on each device. When you click on this item, recovery from this image will be launched. That is, the system will be completely updated to the state in which it was after the purchase.
Wipe cache partition. The contents of the system cache will be completely deleted.
Wipe data | Factory reset. Selecting this item will allow you to reset all settings made by the user for the entire period of operation. The device will completely revert to the preset factory settings. Please note that during the reset process, all information entered and saved by the user will be lost. Including all files, folders, music, videos, etc. However, the performance of the tablet usually increases by an order of magnitude after a factory reset.

Once again, let's talk about the Recovery menu, since almost always instructions for flashing and upgrading Android provide for performing certain actions from Recovery menu.

What is Recovery?

Recovery (recovery) or translated from English - Recovery Mode is a special boot mode of the device, with which you can restore the system or install updates. This is an emergency mode necessary to restore the working state of the mobile device in the event of program failures, which resulted in the device being turned off and the inability to load it in normal mode.

Using the Recovery mode, you can:

Restart your tablet or smartphone.
Reset the settings.
Install updates.
Configure and install firmware.
Get Root rights.
Delete your personal data in the system.
Recover your operating system and more.

Remember that incorrect actions can harm the system. If your tablet contains important information, it is better to save it to another device in advance.

Read the instructions carefully before using the recovery mode. Each tablet service menu different from others, therefore, in the question of how to enter the Recovery menu on a tablet, an individual approach is required.

How to enter Recovery?

The Recovery mode in each mobile device is visually different, but the login process is almost always carried out according to the same principle. In order to enter the Recovery system, you need to do a number of actions:

1. Turn off your tablet. When doing this, make sure that the battery is fully charged or connect the tablet to the mains.

2. Enter Recovery mode by pressing a combination of some buttons. Since different tablet manufacturers offer different keyboard shortcuts, here are some of the most common keyboard shortcuts for entering the recovery menu.

The main key combinations for entering Recovery:

simultaneously holding down both the "volume" keys and the "power on" key;
simultaneously holding down one of the "volume" keys and the "power on" key;
simultaneously hold down one of the volume buttons, the Home button and turning on the device.

The buttons are held until the recovery mode appears on the display.

Some Chinese devices do not have a Recovery mode. In this case, you will have to reflash the tablet.

How to navigate the Recovery menu?

Most devices allow you to navigate through the menu items using the volume buttons. The power button serves as a selection of the desired menu item. Some devices may use other keys as well.

If the control is touch-sensitive, then we move through the points and select the desired item by pressing with a finger.

How to enter Recovery if the tablet does not have volume keys?

If your tablet does not have volume keys, follow these tips:

1. You can try to enter the desired mode by holding down the power and Home buttons at the same time. Another option is to hold down the Home key, press the power button, and release the Home key. After the splash screen appears, press the Home button again.

2. You can navigate the menu by connecting USB keyboard via OTG cable or using a sensor.

As you know, the Android operating system provides the user with huge functionality, using which he can realize the full potential of his smartphone. Starting from advanced settings using the engineering menu and ending with a complete factory reset using Android System Recovery 3e. What to do in this menu with a smartphone, you will learn from this article.

This setting mode was provided to work with system files and system parameters. With it, you can activate or block almost all functions of your Android device. Here you can carry out such complex manipulations as a complete cleaning or system restore in just a couple of clicks. Due to the fact that this menu plays an important role, it is not so easy to get into it, but more on that below. In order not to harm your device, you need to know the points of the mode, their meaning in Android System Recovery 3e and what to do to carry out certain actions.

Launch Android System Recovery 3e

As mentioned above, launching this menu is not easy. To get here:

Turn off the gadget;
At the same time, we hold down the volume rocker, the Home button and the power key.

After a few seconds, the Android logo will appear on the screen, and then the Android System Recovery 3e menu will launch. What to do in it, and what menu items mean - we'll talk about this further.

Assigning items in the mode

The very first and most important point- Reboot. It allows the user to restart the device.
To use the memory card of your device as external storage connected via USB, select Toggle USB strage.
There is also work with the CWM package. It is used to install native Recovery on the device.

Choosing "Instal from sdcard" (installing CWM from a memory card), you will find yourself in a subsection with the items:

Installing CWM Recovery, which is preloaded on the memory card - Choose zip from sdcard;
Check md5sum - Check md5sum a file;
Find out the signature of the CWM package - Toggle Signature Verification;
You can check CWM for compatibility with the device by clicking on Toggle Sclipt Assert.

How to use for flashing Android mode System Recovery 3e, what to do on Lenovo or other gadgets? Use only proven functions that you know about!

Reset all smartphone data - Wipe data / factory reset;
Wipe Cache allows you to completely clear the cache;
Wipe dalvik cache is used to clear Dalvik-Cache;
Use Wipe battery stat to clear battery usage history;
Format System completely removes all system files;
Format Date formats the data section;
Format cache deletes cache data, but the files themselves remain in it;
Cache kernel data clearing - Format boot;
To completely format your device, use Wipe all partitions.

By the way, how to use Android System Recovery 3e, what if the tablet is your device? All the values of the menu items that we are talking about are completely identical for all gadgets under Android.

The next section is one of the most important. Backup / Restore is responsible for backing up and restoring data. It contains points:
Backup creates a backup copy of the data;
Restore is used to restore the factory firmware;
Advance Restore is used to restore individual data partitions;
Advanced Backup can be used to copy partitions.

The next item is responsible for converting formats to Android System Recovery 3e, what should I do in this menu? Here you can choose different types of converting to EXT4 and EXT3. Here's what this section allows you to do:

Convert / change a backup converts the device system;
Use Convert Data to convert data;
Change one of you backup is used to translate backup sections;
Convert Cache converts the cache;
Wipe data / factory reset is used to convert all partitions;
System - format system, on the contrary - format data; cache - format cache.

Extra menu

In the Advanced section, you can perform the following actions using the following commands:

File System Check checks the validation of system files;
Print Partition Info displays log information on the display;
Copy recovery.log to sdcard is used to save copies of the recovery log;
Opening ext and ext2 formats on an SD memory card - Partition SD Card;
No - save my fat32 partition! terminates partitions;
Use Fix Permission to fix permissions in / data / data.

And finally, the last item on the Power Menu. It is used for power management:

Reboot Recovery reboots;
In Bootloader mode, use Reboot into Bootloader;
A simple reboot is done using Reboot;
Power Off - normal shutdown.

Thus, using this menu, you can implement a huge number of functions that are not available in the visual settings. If you have any questions, you can always ask them in the comments!

Android System Recovery 3e is one of the mobile features that are appreciated by device users. The main purpose of the specialized tool Android System Recovery 3e is to clean the device from files and restore. By carefully studying all the available features of this function, you can make sure that its demand is fully justified.

Brief description of Android System Recovery 3e

Activation special regime settings assumes a quick and successful solution to the task. So, you need to turn off the smartphone, then hold down the keys to adjust the sound, the Home button, and the on / off button. Only after the user holds three buttons at the same time a little, it will be possible to see a special menu.

System Recovery is a varied menu that is ideal for solving any existing issues. Mobile phone users will be able to successfully progress on all points, knowing what meanings they have. In each case, a special approach to solving existing problems is assumed:

Check md5sum a file - check the md5sum file;

Toggle Signature Verification - verifies the signature of the CWM package;

Toggle Sclipt Assert - checking the package for compatibility with a mobile phone.

System Recovery allows you not only to successfully recover a mobile device, but also to use additional available functions.

What features does System Recovery have?

Thinking about what android system recovery 3e is, what to do you need to understand, so it is advisable to carefully study all the available functions and make sure of the optimal functionality of the Recovery system.

Install - installation, kernel, system utilities using a special file. It is supposed to use zip-archives with a special structure and utility.
Backup / restore is one of the most important components for backing up an operating system. It should be noted that full backups are recommended.
Wipe / format - cleaning and formatting the segments of the used internal memory. Most often, a simple wipe is sufficient, but formatting is rarely used.
Mount - mount different partitions mobile phone... This is required when installing a new modification of the operating system.

Carefully studying the capabilities of the Android operating system, it can be noted high level functionality and feasibility of having System Recovery.

More experienced users Xiaomi devices running Android already know what Recovery and Fastboot modes are and what they are for. That's why, this instruction, is aimed rather at beginners who want to learn a little more about the technical side of the device, or have decided on the firmware. So what is it Recovery and Fastboot on Xiaomi, how to turn them on and off?

1. Recovery Mode

Recovery mode, or recovery mode, is a special menu that allows you to perform some actions with your smartphone. There are two types of them: stock and custom.

Stock Recovery

Installed with the official, factory firmware. It is rather scarce in its capabilities. Usually there are only 3 functions: (clearing the Data section) and connecting to Mi-assistant(Connect with MIAssistant).

Custom Recovery or TWRP

This is Recovey from third party developers. It is installed by you yourself, instead of the stock one (sometimes, sellers do not put official firmware, for example from MIUI Pro and therefore, most likely, you already have a custom Recovery).

It looks completely different. Usually, when loading into it, the language selection menu first appears, in which there is, including English. Actually, you need to choose it, unless, of course, you speak Chinese. The selection might look like this:

Or like this (here we can execute several tests, as well as, immediately get into recovery or fastboot):

Here are the wipes of various sections ( Wipe), and the ability to create a backup ( Backup) of any information on your smartphone (including IMEI), and most importantly, what it is used for most often is the firmware ( Install). And in general, there is still a lot of interesting things. We will not dwell in detail, because this topic is very broad. Perhaps we will make a separate instruction for it.

How do I log into Recovery?

This is done very simply:

Turn off the smartphone
We hold down the volume up button and power. We hold until the download starts.

Navigation through this menu is performed using the volume keys. Confirmation of the selection - with the power button. Custom Recovery also supports touch.

How do I exit Recovery?

Find the item Reboot, select it and confirm with the power button.
If, for some reason, the first point did not work, then just hold the power button for a long time.

2. Fastboot mode

Fastboot mode - required to connect your device to a PC for the purpose of flashing, installing custom Recovery, etc. We can say technical mode for deeper work with a smartphone.

How do I log into Fastboot?

To enter fastboot mode on smartphones Xiaomi, necessary:

Turn off device
Press the volume down and power button. Wait for the smartphone to vibrate and release them. A rabbit in a hat with earflaps should appear.