Sometimes it seems that it is winter that the Magic button "Create a masterpiece" appears on the camera. Especially if snow has passed the night before, and the trees in the park are bought in beautiful snowy hats. Beautiful, isn't it?
Winter photos fascinate. But it is not very convenient to be photographed during the snowfall. And you want, in order to the snowball captured a shot, not only lay around a soft blanket, but also spinning in the air. Here, Photoshop comes to the rescue, where you can create a realistic falling snow.
By the example of this image of a girl on a winter background, we will add soaring snow into the composition.
As in "Photoshop" make snow - flying snowflakes in the photo
So, proceed:
- Create a new empty layer in any convenient way. By clicking on the icon for creating a new layer, or a combination of Ctrl + Alt + Shift + N.
- We take a round soft white brush and put the points in the image of the corrosion. To get the effect of snow in "Photoshop", the size of the brush must be changed. Future snowflakes will not be the same then.
- So that the snow in the photo in "Photoshop" did not seem so unnaturally round, we will move it and give snowflakes the effect of movement. We go on the menu: "Filter" - "blur" - "blur in motion". We choose the power of blur and the angle of movement, guided by its own taste. Play with the settings and select the options that match your image.
For snowflakes bigger sizeThat fly close to the camera, create one more layer and draw some larger snowflakes in the same way. We repeat the steps for both the first layer, only with other parameters of the strength and direction of blur.
Next Stage - Creating Snow Texture
For this step, solving the task, as in "Photoshop" make snow, you need to download the wallpaper with snow on a black background. We carry it into our working paper as a smart object.
- Select: "File / Place". The image with snow will appear in our document, now it needs to be stretched so that it closes the entire image.
- Do not forget when transforming hold the ALT key when you stretch the image so that the proportions of the snowflake remain natural and not deformed.
- Change the overlay mode from normal to " Screen».
- We hide some snowflakes, for which we will create a mask on this layer, and the black tassel remove snowflakes from the lips and chin of the model.
I wonder how to make snow in "Photoshop"? Daochen just! We created a realistic snow just a few steps.
The method of the second, how to create snow in "Photoshop"
In the second way, how to add snow in "Photoshop", we will use all the same image of the girl and make it more dynamic and attractive with a falling snow. Unfortunately, the author who made this photo is unknown. You can use your photo or download any suitable for creating a similar effect, with free photobanks.
Use tools "noise" when creating snow
So, proceed:
- Open the original image, press Ctrl + O to open it to all the workspace.
- Create a new layer: Press the Latin key D to reset the default colors.
- Press the Alt + Backspace keys pour this layer in black.
- To this layer, use the "Noise" / "Add Noise" filter. We put about 100-120% distribution by Gauss and note the item "Monochrome". Click "OK".
- Then we use the "Imitation" / "dry brush" filter to this layer. For the version of Photoshop CS6, we go along the path "Filter" / "Filter Gallery" / "Imitation" / "Dry Brush". By changing the size of the brush, we get more or less snowflakes, depending on the settings of the brush parameters. Let us dwell on the value of the size of the brush 2, we will leave 0 and texture 1.
Now, if you enlarge the image, you will have falling snow - realistic snowflakes, as in nature. You do not find the same here, they all differ in size and in shape.
Now pressing the Ctrl + J key combination with this layer. On the first we will create foreground snowflakes, on the second - rear. We hide the visibility of the second layer and work while we will be with the top.
To get rid of the black background, change the imposition mode to "Lightening" or "Screen". And the black background with us becomes transparent - invisible.
Snowflakes should not be as sharp, so we will wash them a little "in Gauss." Radius We deliver about 1-1.5 pixels, depending on the image.
Dynamics of movement - snowflakes flying in different directions
Now our snowflakes need to create some kind of movement dynamics, as in "Photoshop" make snow needs to be realistic and dynamic. If you use the filter "Blur in motion", then it will reveal all the snowflakes at an angle, which we task. We will go to another way and create the effect of snowflakes, chaotic flying in different directions, as in nature:
- To begin with, we convert this layer into the smart object to be able to edit it. We go to the menu - "Filter" / "distortion" / "Wave".
- "Number of generators" put 1, type - "Triangle". "Repeat boundary pixels" put by default, but with the "wavelength" settings, "amplitudes" and "scale" you can play and select suitable to your image.
Now all the snowflakes are scattered in different directions. If you do not like the result, then with a double click on the "Wave" line under the Smart Object layer, you will again open the dialog box of this filter, which can be edited.
Get rid of unwanted artifacts in the image
If you pay attention, then in the edges of the image after applying this filter there will be unnatural strips, you can get rid of them, just stretching the layer with snowflakes by the edges of the main image. To do this, press the CTRL + T key combination to trigger the free transformation tool, and with the alt pinch, we stretch the image so that the strips across the edges come out for its borders. When a warning window appears that smart filters are temporarily disabled, - confirm the action.
We make the correction layer "Levels" - create a sending mask for it and, moving the slide medium and left, correct the amount and brightness of snowflakes.
Go to the second, while hidden, layer, we make it visible, repeat all the steps, as for the first, only with the difference that the background snowflakes should be smaller and blurred.
Then you need to create a layer mask on this layer and a soft round brush of black to hide snowflakes from the model to look as much as possible. And also reduce the opacity of the layer to 60-70%.
Now you know how to make snow in "Photoshop". That's what we did. Creative success to you - try, train!
In this lesson you will learn how to create a winter collage with using photoshop action. The lesson "Zima approach" in Photoshop was inspired by the famous television series. We will create a medieval scene with the knight and the castle in the background. To create a winter landscape, we will add the effects of falling snow, fog and, of course, change the color tone to change the time of the year.
Final image:
Note: The author used paid materials. In the archive you will find alternative option Images for performing a lesson. Instead of a paid action (transformation of summer in the winter) you can use the lesson.
Step 1
In this lesson you will learn how to create a winter collage with realistic snow and snowfall effect. At this lesson, I was inspired by the popular fantasy series "Game of Thrones". You can apply the winter effect to any other photo with the same results.
Let's start with an image of a beautiful medieval castle on the lake. Name this layer Castle on background.
Duplicate a layer Castle on background And name it Lock. Change the size up to 75%, as shown in the image below.
Step 2.
Add a layer mask to a layer Lock.
With a soft round Brush. Tool. (Brush) Black Make a seamless transition between two layers. You must paint the lake and the surroundings of the castle. Play with different levels of opacity, as well as change the size of the brush to get good results. The layer mask is a non-destructive way to hide the image area. With the help of black, you hide, and with the help of white, you show certain areas.
To expand the bottom area of \u200b\u200bthe image, you can take advantage Clone Stamp Tool. (Stamp) or you can use Edit. > FILL (Edit\u003e Run fill), Content-Aware. (Taking into account the contents) - a new feature of CS5.
Step 3.
In this step I will add a correction layer Gradient map (Gradient map) to change the color shades of the castle. For gradient Take two colors # 65282F / # FEF9E8, also set the overlay mode Color (Chromaticity) with Opacity (Opacity) 27%.
Duplicate a layer Gradient map (Gradient map). Install overlay mode Overlay (Overlapping) with Opacity (Opacity) 100% to get a similar result.
Step 4.
And now add the medieval knight on the new layer. Add a mask to this layer.
Use again Brush Tool. (Brush) of black with different opacity levels to hide some areas, as shown in the window preview. Around the knight, use a rigid round brush to make accurate selection. Around other areas, use a soft round brush to create a smooth effect.
Step 5.
Add Gradient map (Gradient map) with the same colors that were used for the castle. Install the overlay mode on Color (Chromaticity) with Opacity (Opacity) 40%, specify this layer as a clipping mask.
Add a layer Brightness / Contrast. (Brightness / contrast) as a clipping mask for a layer with a medieval knight.
Add a corrective layer Gradient map (Gradient map) above all layers with the following colors: # 65282F / # FEF9E8 and set the overlay mode on Color (Chromaticity) with Opacity (Opacity) 27%.
Step 6.
Create a new layer on top of all other layers, name it Medieval knight And press the SHIFT + CTRL + ALT + E key combination to make a combined copy of all layers. Duplicate this layer in a new PSD file..
For quick and realistic winter conversion you will need actionWinter approaching (fee). Download the action and download PAT and ATN files. Go to the menu Window\u003eActions (Window\u003e operations) to open the tab Actions (Operations). Select the action "Winter EFF by PSDDEDE" and click Play. (Playback).
Note: Instead of a paid action, you can take advantage of the lesson by turning the summer in the winter in Photoshop.
Action will stop to set the threshold value. Levels. (Levels). Install it in position 230; The idea is to get a few white details, but not too much. Click OK to continue.
The action will stop for you so that you paint the areas you want to show, and then continued to play. Via Brush Tool. (Brush) White Fold the knight. You will be able to adjust the effect after the action is over, therefore it is not worth paying a lot of attention. Resume playback!
The action will stop for you so that you paint the areas you want to make more colorful and resumed playback. Take Brush Tool. (Brush), this time in black and squeeze the same knight area. You can adjust the effect after the action is over, so again do not pay much attention. Resume playback!
Action will stop here on this layer style Pattern Overlay. (Pattern Overlay). To move the template, hold the mouse and across it on the screen to change the effect of fog.
After the action is completed, you all layers will be untouched, so you can adjust the result. To correct the knight, you must walk inside the mask with a white color to show the desired areas, and black to hide the necessary areas. Click on the miniature of the layer masks and just shine the image. To give the knight an original color effect, you must draw inside the layer Hue / Saturation. 1 (Color Tone / Saturation) Black to manifest effect, and white to hide it. Click on the thumbnail of the mask and just crush the image.
Step 7.
If you do not want to use this action, you can try some of these wonderful learning lessons to create the effect of winter and snow in, but it will be a longer process.
Step 8.
To add the effect of sun glare, I used the rays of the light Photoshop. Slightly configuring some adjustments, I got such a result. You can use one of the textures of the flare with the overlay mode. Screen. (Screen) or Lighten. (Lighter).
As the last strokes, I used the filter High Pass (Color Contrast) to increase the sharpness of the image and get an ice clear effect.
Note: You can use this lesson to increase sharpness.
Here is the final result of our collage. Winter approaching in Photoshop. I hope you liked this photoshop lesson!
Collage "Winter" with a lesson in PhotoshopThe material is taken from open sources on Yandex - Photo.
Filters
Unlimited2 - Graphicsplus.
Unlimited2 - Simple.
Unlimited2 - Tramages.
Unlimited2 - PaperTextures.
AAA Frames - Foto Frame
Alienskinxenofex2.
DRAGONFLY- SINEDOTS11
1. Create new document (Ctrl + N) with dimensions of 620 per 480 pixels.
2. Prepare colors: Basic blue # 515079 and white #FFFFF background.
3. Thebell bucket and pour the primary color.
4. Filter - Texture - Mosaic Fragments - 93,3,9
5. Filter - distortion - Polar coordinates - rectangular to polar.
6.Sloe - create a duplicate layer.
7. Print the filter Unlimited2 - Graphicsplus- QuickTile11 - 0,0,0,59
8. Layers - Create a duplicate layer.
9. Apply Unlimited2 Filter - Simple- Topbottom Wrap
10. The overlay layer is overlapping.
11.Sloe - combine with the previous one.
12. Layers - create a duplicate layer.
13. . Applicable Filter Unlimited2 - Tramages- MARBLE- MADNESSONE - 124,118,21.0
Change the layer overlay mode - hard light.
14. Layers - Combine with the previous
fifteen. . Apply the Unlimited2 filter - PaperTextures- FIBROUSPAPER, COARSE- 88,128
16. Equality Clipart.
We transfer to our collage and stretch to the whole document.
17.Sleva on collage Install a girl
Editing - Transform - reflect horizontally.
Change a little color tone by clicking on Ctrl + U (+29; +50; -13)
Click on FX at the bottom of the layers and add the shadow to sinking (just clicking on OK)
18.Turn on the bottom layer.
Image - canvas size - changing the size: width - 750pix. and height - 580 pixes.
Free transform stretch the layer to a new size.
19. Applicable Filter Unlimited 2 - Tramages - Marble Madness One - 26,0,0,0
20. Applicable Filtaa Frames - Foto Frame -43,0,0,0,0,0,0,100
21. Press on FX at the bottom of the layers and add the stroke inside the white pixel.
22. Print Alienskinxenofex2 filter - cracks
23. We form a new layer.
24. Print the filter Dragonfly- Sinedots11 -
And get such veil
24. We create a new layer.
25.Sloe - Arrange - to the background.
26. Image - Size of the canvas - changing the size: Width - 800Pix. and height - 620 pix.
27. Play blue # 191964.
28. Apply Alienskinxenofex2 filter - Cracks the same settings.
29.Sloe - combine visible.
Good luck and good mood.
With respect * GP *
At today's occupation, we will clearly consider the creation of an emotional, sensual drawing in the dark forest. The main hero of the picture will be a deer. To purchase a solid episode, different pictures are combined into a general image, for this use correction layers, a layer mask and eventually get light, shadows, etc.
This occupation is performed using adobe Programs Photoshop CC 2014, but it is possible to use other versions of SS 2014 and newer.
Applied materials:
- deer
- voron
- nebula texture "nebula"
- the texture of burning lights ("Starry 4").
Chronology of creation
Action 1.
Create a new document. Commands File - Create (File - NEW). Set the dimensions, they must be no lower:
Sh.: (Width): 894 PC
W: (Height): 708 PC
Resolution: 300 (PC / inch) 
Action 2.
Open the starting drawing "Forest", using the Move Tool command to transfer it to the new document created earlier, if necessary, then transform it. Press the keyboard key (Ctrl + T) and to save the proportions clap and hold SHIFT. Position the picture, as depicted in the photo. 
Action 3.
Change the initial drawing "Forest" into the smart object, for this you click on the right button on the layer with the forest and select "Convert to the Smart Object" (CREATE SMART OBJECT).
To add depths to the future drawing, use the "Blur over Gauss" filter. Transfer to the filter - Blur - Blur in Gaussian (Filter - Blur- Gaussian Blur) and set the blur radius by 8.2 ° C. 
Action 4.
Choose the brush tool (Brush Tool). Brush soft, black color. In setting up the tool, install by 30% "opacity" (opacity) and "Press" (Flow). Being on the Mask-layer of the filter "Blur in Gauss", clean the blur. The photo below shows the zone: 
The result was the depth in the future Figure: 
Action 5.
Adjust the "Bright / Contrast" layer (Brightness / Contrast), use a form that hides another image so that only the circuits of the clipping mask remain noticeable, in other words, it is necessary to attach the adjusting layer "Brightness / contrast" to a layer with a forest. It is necessary to hold the key (ALT) and bring the bright / contrast between the corrective layer "Brightness / Contrast" and a forest layer. Then click the left button. As a result, they attribute a corrective layer to a layer with the forest.
Install brightness indicators - 62 and contrast - 46 
Action 6.
Add the correction layer "Color Balance" (Color Balance) and use the "Create Clipping Mask" with it.
After executing the previous step, where correction layers were added, the following indicators are used for shadows: for the red shade, it is set to 19, green - 7, blue +7. For halftone (Midtones): Red - 24, green - 21, blue +5. For light (Highlights): Red - 15, green - 10, blue - 2. 
As a result, it turns out: 
Action 7.
In this action you need to reduce the amount of yellow shade in the picture. In this case, use adjustment. To do this, select the "Selective Color" command and use "Create Clipping Mask".
The settings panel looks like this: yellow - 19, blue - 100%, purple - 4%, black is not used and exhibited - 0. 
As a result, it turned out: 
Action 8.
The next step adds a special nebula. To do this, you open the starting picture "Nebula" and using the Move Tool (Move Tool) tool to the main document, using the key combination (Ctrl + T) transform it.
To save the proportions clap the Shift button, you apply a picture: 
Before seeing how particularly the nebula, it looks like, renamed a layer in the "Nebula", reduce the "opacity" (opacity) to 33% and transform the order of overlaying on the "screen" (Screen): 
Action 9.
Add a layer of adjustment "Color Tone / Saturation" (HUA / SATURATION) to "Nebula", and also use "Create Clipping Mask). Color tone indicators - 92, saturation - 13. The tag on the Toning command (Colorize). 
Action 10.
Reveal a PSD file with a raven, pick up any liked the object, then place it on the main document. For a more realistic image of the fusion of the crow, the filter "Blur in Gaussian" is used (Filter - Blur - Gaussian Blur). 
Action 11.
Go to the creation of a light source. Create another layer of "light source" using the combination of buttons (Ctrl + Shift + Alt + N). Choose "Brush" (Brush Tool). Make it soft using the "opacity" and "Press" settings (FLOW) to 50%. Makes changes in the foreground color palette on (# 1B3A5D) and create a beam of light. It can be seen in the figure below:
Change the procedure for applying for a "light source" layer on a "Linear Liner" (Linear Dodge), and reduce "opacity" (opacity) to 88%. 
Action 12.
At this stage, it is necessary to add the picture to the "Starry4" texture, which is contained in the set and add it using the "Move" tool to the main document and so that only half is visible. Below in the figure shows how it looks: 
To eliminate a black background and harmoniously enter the texture in the picture you need to change the order of overlaying the texture on "Screen" (Screen): 
Go to the color change texture. Add a "Color / Saturation" adjustment layer (HUE / SATURATION), then the "clipping mask" apply to this layer.
In this case, the saturation rate is 100: 
For the completed picture, a couple of burning objects are added, create a new layer "Glow 2". Choose "Brush" (Brush Tool). Make it soft, color white, as in the picture: 
Action 14.
Add external glow "Glow 2". This can be done by clicking on the layer of the left mouse button 2 times and use the following sizes of "external glow" (Outer Glow) - Basics Lightening (Color Dodge), Opacity (OPACITY) - 54%, Color (# 166082), Size (Size) : 32 px.
Dubbing the layer "Glow 2" by a key combination (Ctrl + J) and have a glowing point in different places of our document where you consider it necessary. The preliminary result that should turn out: 
Action 15.
It has time to add a deer to the Dark Forest. To do this, open the main picture and using tools allocate and extract the image and placed it on the main document. Change, for this you need a key combination (Ctrl + T). To save the proportions clap and hold the SHIFT button. They feature a picture, as shown below: 
The lower limbs of the animal are masked using the layer mask. It is necessary to create a realistic effect of a deer standing in the grass: 
Action 16.
Next, you need to create an external sensation falling on the grass shadow. The natural beam of light is directed to the back of the animal, hence the shadow will fall from its lower extremities. Form a new layer "Shadow", it is located above the layer with animals. Choose "Brush" (Brush Tool). They make it soft, color black, set the level of "opacity" and "push" to 30%, then apply the shadow as in the picture: 
Action 17.
Reduce the brightness of the animal pattern, add a "color tone / saturation" layer (HUA / SATURATION), change the "saturation" rate to - 34. It is necessary to use the "Create Clipping Mask) to a layer with a deer. 
Action 18.
At this stage, the brightness indicators of the deer and the main picture are distinguished. To do this, you add the correction layer "Curves" (Curves), while using the "Create Clipping Mask) to a layer with a deer. 
As a result, it turned out: 
Action 19.
For a harmonious fit, the image changes and add a "color balance" of a deer in order to enter it even better. The following tones are used: red - 20, green - 17, blue - 15; For halftone: red - 29, green - 3, blue +12. For light: red + 11, green +7, blue +6. In this case, use the "Create Clipping Mask" to a layer with a deer. 
As a result: 
Action 20.
Form another layer over the entire "lighting", in the palette, the tone is changed at the first plan on (# 2B5463). Choose "brush". Make it soft, set the level of "opacity" and "push" to 30%, focus a natural light source, falling on the back of the animal as in the picture: 
Transform the procedure for applying the "Lighting" layers to the "Linear Liner" (Linear Dodge) and reduce the "opacity" to 55% 
As can be seen in the drawing, the deer perfectly fit into the main image.
Action 21.
We repeat the s No.11. Color brush (# 1D506D), layer "Forest lighting" 
Action 22.
Change the procedure for the imposition of layers "Lighting of the Forest" on the "Replacement Light" (Lighten) and reduce the "opacity" to 66% 
Action 23.
We begin the final correction of the picture, adding a fixing layer "Gradient Map" (Gradient Map). 1 click on the color strip of the gradient and set up the specified colors: left (# 000000) to the right (# 143D4E) (from black to dark blue). 
Change the order of the imposition of the "Gradient Maps" on the "Clarification of the Basics" (Color Dodge), in order to make the gradient lighter. 
Action 24.
Adjust the "Selective Color" layer (Selective Color) and configure the following indicators: the settings panel looks like this (green): yellow - 100%, blue - 100%, purple - 100%, black is not used and set - 0.
The settings panel looks like this (color - yellow): yellow - 5%, blue - 13%, purple - 26%, black is not used and exhibited - 0.
It is necessary to eliminate extra green. 
As a result: 
Action 25.
Add a layer to adjust "brightness / contrast" with indicators: brightness - 67, contrast - 32, opacity to 64%.
Immediately add the correction layer "Color Search" (Color Lookup). At the same time, it is important to note that the presets were used here: "Kodak 5218 Kodak 2383". Those who do not use version Photoshop. CC, recommended to achieve similar results by reducing the level of opacity for the corrective layer "Color Search" to 55%. 
After using corrective layers, it turned out: 
Action 26.
And in conclusion using correcting layers, add finite "brightness / contrast" with indicators: brightness - 49, contrast - 1. 
As a result: 
Action 27.
Being on the last adjusting layer "Brightness / Contrast" need to get rid of unnecessary shades, for this, go to the mask-layer of the correction layer and choose the "brush". Make it soft, set the level of "opacity" and "push" to 30%, black color, it will save bright light lights in the center of the image: 
As a result: 
Action 28.
If you wish to make fewer luminous lights, you do not need to take an "brush again", but it is enough to install the cursor on the "Brightness / Contrast" layer and click twice with the left mouse button. A window appears: 
Reduce the "density" (DENSITY) of C 100% to 65%, drag the slider to the left. The decrease in density leads to a change in color from black to gray. 
Let's look at the final result of our Labor:
As it can be seen reduced brightness in the center of the picture, using a layer-mask density. If a
We all strive to tell the story with the help of one single photo. However, in many cases, a well-designed collage can be an excellent way to open the viewer much more. This method can be useful for photos from the event, shooting real estate or even a family photo shoot!
Create a collage in Photoshop is very simple, so let's start. Note that I work with Photoshop CS3.
Photo selection is crucial. You need to choose such a combination of collage elements to display all the event. This means that you need to take several extensive pictures that show the whole scene, and several detailed photos that display many textures and personalities. Without one or another history will be incomplete, and will not give the emotions that can convey.
Step 1. Open the selected photos for collage inPhotoshop.
Open all selected images in Photoshop. Will need to take at least three, but also avoid too large number. Usually I restrict my selection of photos of eight. Remember that the more photos you choose, the harder will see their details.
Step 2. Create a new file
Create a new file (file -\u003e new). Its size should be a little more than the one you want to get in the end. I always make it 20 × 30 "at 150ppi.
Step 3. Add your photos one
Go to one of the open photos, use the selection tool to select all (or press Ctrl + A). Press Ctrl + C to copy. Go to the new document and press Ctrl + V to insert the selected one. Thus, you copy a photo to a new document on a separate layer. Depending on the size and resolution of the image, you may need to adjust them. To do this, press Ctrl + T to transform. Use the angular node and holding the SHIFT key, set this size so that the image is convenient to move in a new document.
Note: If you first convert the image layer into a smart object, it will maintain the integrity of the image quality during a change in its size.
Step 4. Create a collage layout
After you have added all the photos from which you want to create a collage, there is a turn to arrange them! Move the images until you feel that this location transmits your history the best way. After creating several collages you will develop your own style. I prefer either create symmetry in the layout, or make it look like a puzzle. As they say, for each story its needs.
Step 5. Add spaces between images
When the layout is ready and the photos are fitted under the appropriate size, you can create a thin white line between them to add a little visual space. This step is not required, and the width of the dividing strip depends on your preferences.
To do this, select the layer of the image you want to move, and use the arrows on the keyboard to move it in different directions. Using the arrows on the keyboard instead of the mouse will help create the same space between photos.
Alternatively, you can connect them back and use the layer style (select Stroke\u003e inside), adding a white or black edging to each image. See the screenshot below.
Step 6. Combine everything layers
After your collage is ready and photos are divided as you want, it's time to combine all the layers. To do this, press Ctrl + SHIFT + E.
Step 7. Cock ready image
After combining all the layers in one, make the image trimming so that the white space from all sides is the same. On my collages, this edging, as a rule, is very thin, so I do not make it difficult for measurements.
Step 8. Change the size for use online
You may have to change the size of the finished collage for use in social media. I recommend keeping a compressed original in jPEG format For the opportunity to reuse its future.
Step 9. Add a watermark if you wish
If you want to put a watermark on your masterpiece, now it's time. After you do it, do not forget to once again merge all the layers and save the file in JPEG format. Now you are ready to show your collage of the world.
