If you are going to sell a computer and the new owner wants a PC with installed system, but he prefers to activate it with his key, then the information about the previous activation will need to be deleted. Of course, there are other reasons why users are beginning to wonder how to remove Windows activation 7 Maximum or in other versions. By the way, in this case the key can be saved and used on other devices. An exception may be codes for OEM distributions. operating system, tied to certain hardware, for example, motherboard.
Removing an activation
In order to make this procedure in Windows 7, let's use the command line. You can open it by typing cmd in the search engine. We click on the program with the same name, and a window opens in front of us command line. It should be noted right away that in order to perform actions in it, you must log in to the system with administrator rights.
In the window, enter Slmgr / DLV. In the list that appears, we need the Activation ID parameter, which we click on with the mouse. Pay attention to the values that go in the line after the parameter name itself. We need them to remove the activation information. And we will use the Slmgr / upk command for this. After it, enter the copied values. If everything is done correctly, a message will appear stating that the activation key has been deleted.
Some users want to disable system authentication. In order to do this, you will need to send update KB971033 to the trash. Go to the Start menu - Control Panel. Here you need to switch to the view mode Small icons.
We are interested in the section called Windows Update. In it, go to the Log View section, where there is a parameter Installed updates. In this category we find the addition we need KB971033. Hover over it and right-click. From the drop-down list, select Delete. It is imperative that such problems do not arise in the future.
You and I have not only looked at how to remove activation information, but also how to disable system authentication. Of course, these are not the only possible options, there are others, but these are quite simple and understandable even for inexperienced users.
Authentication of the Windows operating system (Windows activation) is a procedure that checks for the presence of original files in the operating system and the license itself (including the key that was entered during OS installation). If the operating system has not passed such a check, then the user's capabilities when working with the computer are significantly reduced. Usually, when the operating system does not pass the test, a corresponding message appears in the extreme right corner of the desktop.
The most popular way
After installing the Windows Seven operating system, the message “Your a copy of Windows is not genuine." This means that you did not perform the system activation operation. Without activating the system, you will not be able to use it for more than 30 days, and the functional component of the system will be significantly curtailed: downloading critical updates, technical support from the developer, etc.
You will need
- operating room Windows system seven, mobile phone, Internet connection.
Instruction
You will need your system key to complete. This key can be found on the installation box, housing system block or . If the operating system was purchased, take a look at the developer's website. If you have problems entering the key, please contact the Help Desk Microsoft.
During the launch of the activation program, Windows Seven automatically searches for a network connection. As soon as this type of connection is established, it will report a successful connection. Click the Start menu, right-click Computer, select Properties, then Activate Windows.
Select the "Activate Windows over the Internet" option. Enter the administrator password to activate the operating system as an administrator. Click the "Next" button and follow all the instructions that will appear in the system activation windows.
If there is no Internet connection, use activation software. Open Windows Activation, select Show other activation methods. Then specify the Windows Seven key, click the "Next" button. Click on the "Use Automatic Phone System" button. Select the closest location to your locality, then click the "Next" button.
Related videos
Before using the installed OS, you must activate it. This procedure is a guarantee of using a licensed copy of the product on a specific computer, and is also designed to reduce the level of illegal copying and installation of pirated versions of the OS. To activate the installed operating system, you can use one of the three available methods.
Instruction
Internet activation.
2. Click the "Yes, activate Windows online" button.
4. In the window that opens, do one of the following:
To activate and register your copy of Windows at the same time, click "Yes, register and activate Windows" and "Windows Registration Confidentiality Agreement", then click the "Back" and "Next" buttons. Fill out the registration form and click "Next";
to simply activate Windows (without registering it), click "No, do not register, only activate Windows", then click the "Next" button.
Activation by .
1. Open the "Windows Activation" window, to do this, left-click on the corresponding tray icon or use the "Start" menu.
2. Click the "Yes, activate Windows" button.
3. Click the Windows Activation Privacy Statement, then the Previous and Next buttons.
4. The Activate Windows by phone dialog box will appear, which will indicate free number: do everything according to the instructions in this window and click the "Next" button.
5. When activation is complete, click OK.
The third activation method is carried out using a modem, it is completely similar to the activation method via the Internet and differs only in that it is performed after a preliminary disconnection from the Internet.
note
The activation method via phone will be automatically suggested in case of unsuccessful activation via the Internet or modem.
When buying a new personal computer or portable laptop, it usually includes licensed software, including the already installed Windows operating system. When the desktop loads, her beautiful logo and name appear on it. If you want to change these branded wallpapers, then you need to learn how to remove the Windows inscription on your desktop.
Instruction
Right-click on the desktop. A small window will appear with a list of commands. If you have one of latest versions Windows OS - Vista or 7, then select the lower service "Personalization". In earlier editions of Windows (98, 2000, NT, XP) this service is called "Properties". You can also go to the "Personalization" section through the "Start" menu - "Control Panel", after which a new service window will open. There you can adjust the color and appearance windows, screen saver, sounds and other themes, and, of course, background picture your desktop.
Click on the "Desktop Wallpaper" tab. Another new window "Select a desktop background" will appear, where you will need to specify an image or background that will decorate your computer screen. Click the "Browse" button to select the appropriate wallpaper. This can be any drawing you like, both from any file folder on your computer, and from a folder contained on a removable device - a flash drive, disk, floppy disk. Click the "Open" button, after which the background image will be loaded into the central field of the "Select a desktop background image" window.
In the lower field, specify the parameters for the location of the picture on the desktop - "Stretch", "Tile" or place "Centered". If necessary, use the "Change background color" function. It looks like a text link, which is located in the lower right corner of the service window. At the very end, click the OK button to save your settings. Return to your desktop. Instead of the corporate Windows logo, you will now enjoy colorful wallpapers. And most importantly - that you picked them yourself!
As for working in outdated versions of the Windows operating system (98, 2000, NT, XP), the properties of the desktop there are changed in the same way in the "Properties" service. In the "Properties" folder, the names of the tabs and their location within the window are slightly different from those in the "Personalization" folder. Before changing the desktop picture, pay attention to the fact that branded wallpapers with the inscription "Windows" look very modern. It is better not to change them if you work in the field of electronics. This will emphasize the novelty of your technique.
Sources:
- How to change desktop wallpaper
Activating Windows is a necessary procedure to continue using it legally. You can stop her different ways, including entering a license key.
You will need
- - license key Windows.
Instruction
If you do not have a Windows license key, you can purchase it on the official Microsoft server in the "Purchases" section, as well as in various major online sales stores software- lots of options. If you purchased the Windows operating system with your computer, look for its license code on the special sticker on your computer or . Enter it in the activation window, call the service technical support Microsoft and find out the activation code based on serial number product.
If you do not want to purchase a Windows license key, use another way to continue using the operating system by transferring the system date. To do this, restart the computer, when you turn it on, press the button to go to BIOS - usually you need to press the delete key for this. Enter, if necessary, a password and use the arrows to go to the menu for editing the system date.
Translate it to the one that corresponded to the installation date of the operating system, exit the BIOS, saving the settings. Log into the operating system and see how many days are left before it is activated. This method is not very convenient and has its own characteristics in the form incorrect work many programs and incorrect display of the system date.
The most popular way
There are several reasons why this message appears and several ways to resolve it. First, not all users personal computers can afford to buy a licensed version of the operating system, since one disk can cost more than five thousand rubles. If a licensed copy is not installed on the computer, then you must first disable the OS update service. If, nevertheless, this service was not disabled in time and a black screen appeared, indicating that the copy of Windows was not authenticated, then you need: KB971033 and KB915597. In order to find them and remove them, you need to right-click on "My Computer" and select "Properties" from the context menu. In the properties, the user must select "Center windows updates and go to the Installed Updates tab. There will appear a whole list of all the updates that have ever been installed and are still in use today. Using the search, you need to find messages like: "Update for Microsoft Windows KB915597" and "Update for Microsoft Windows KB971033". It is worth noting that the first update is used by the standard " Windows Defender» (Widnows Defender), which is similar to antivirus software. These updates must be selected and deleted using the appropriate button.
Disabling the service and the possibility of special software
In addition, the sppsvc service may also be the problem. As a result, it must be found and disabled. You can do this in the "Administration" menu, which is located in the "Control Panel". When the "Administration" window opens, you need to go to the "Services" tab and use the search to find sppsvc. When it is found, it must be disabled (the "Stop" button). As a result, the computer needs to be restarted and the problem should be resolved.
It is worth noting that there is special program, with which you can remove the Windows activation window - RemoveWAT21. This small program is able to solve a pressing problem by everyone possible ways(of which there are many). It can either work with updates, or with the registry, etc. In order to get rid of the activation window, you only need to download RemoveWAT21 and click special button RemoveWAT. After restarting the computer, the operating system activation window will disappear. If necessary, you can restore the original data using the "Restore WAT" button.
If you use a pirated copy or forgot to activate after installing Windows, then you know that every time you start the OS, the sign " ActivationWindows" (in Windows 7 - "Your copy of Windows is not genuine"). By the way, the non-activated "ten" is functionally no different from the activated one, except for the personalization settings and the "reminder" (watermark) in the lower right part of the screen. then the Universal Watermark Disabler utility has long ceased to remove the inscription " Windows Activation" forever, after rebooting the system, the "stigma" is visualized again. How to remove the annoying watermark in Windows 10 / 8.1 / 7? This will be discussed in our today's meeting.
Why does the message "Windows Activation" appear? "?
As I already said, main reason the appearance of a watermark - the illegitimacy of the installed copy (flew activationWindows). Regarding the "tens", a year ago it was possible to join Windows program Insider with a non-activated OS, and the reminder inscription disappeared (however, personalization did not function). Further, users who upgraded from Windows 7 and 8 to Windows 10 for free or purchased an upgrade at Windows Store, as well as insiders receive activation without the need to enter a license key (activation key, product key), by linking the license to the equipment. This is the so-called digital permit or digital license (eng. " digital entitlement").
The fact is that the "dozens" license is now tied to your account Microsoft. Redmond made this decision the year before last (from a current news article): " ZDNet experts conducted their own research and found that when upgrading to Windows 10, a device ID is created that is unique and based on the license key of the copy of the operating system, as well as a combination of components. If the installation of this copy of "Windows" is repeated on the same device, it will be activated automatically. Experts note that when adding an additional hard drive or changing the video card, the "ten" will not perceive the computer as new and will receive the status of licensed software. Difficulties can arise when replacing the motherboard, which is considered a key component of the device. In this case, you will have to activate by phone".
How to disable activation in Windows 10/8/7
- To 100% remove the annoying reminder, use the editor system registry. So, with the "hot" key combination " ", open the "Run" command window, type regedit and press " OK" → in the editor, expand the branch HKEY_LOCAL_MACHINE \SOFTWARE \Microsoft \Windows NT \CurrentVersion \SoftwareProtectionPlatform \Activation .
- Highlighting the section " activation ", in the right half of the window, right-click on the " Manual " → next, " Change" → change the value from "0" to " 1 " → "OK"and restart your desktop (laptop).
We remove the activation window (tablet)Windows via.reg file
This method is useful for experienced and lazy users, because. For beginners, I would recommend improving your computer literacy, having mastered the method above. In general, to automate the process of getting rid of the "stigma" on the face of Windows, I suggest downloading an archive from my Yandex.Disk with the corresponding REG-file. The thing is small: after unzipping the file, double-click on it → in the window that appears, to the question "Are you sure you want to continue?" button answer " Yes" → with the appearance of a panel notifying you of successful changes to the registry, click " OK".
In the final, in order to make sure that everything was done correctly, reboot the system.
Important!
REG-files - text files for quick modification of Windows registry data, convenient for setting up, transferring and restoring program configurations.
Dmitry dmitry_spb Evdokimov
After installing Windows 7 on your computer, you can use it for free for a while. According to the terms of the agreement, this period is 30 days. To continue using the system, you will have to activate it, that is, officially register the license key that you received upon purchase. But what if there is no such key? There are two options here: buy a key or hack the activation mechanism.
Legal activation of Windows 7
To launch the activation application, open the system properties: right-click on the “Computer” icon or select the “System” applet in the control panel.
At the very bottom of the Windows 7 properties window, it says how many days are left before the end of the trial period and an offer to activate the system right now. Click on this caption.
Windows 7 activation by phone
If there is a choice, it is preferable to use this option. With it, you can activate the boxed or OEM Windows version 7 of any edition: from starter to ultimate. So you will receive all the necessary keys that will help you legally activate the system in case of reinstallation. With automatic activation via the network, all data exchange is hidden - the key is not reported to the user.
- From the list of activation options, select "Show other methods".
- Click "Use Automatic Phone System".
- Enter the Windows 7 product key. It is written on the box or envelope with installation disk if you have box version systems. Do not confuse, the key from the “maximum” edition will not work with the “home”, “pro” or “starter” versions, and vice versa. Therefore, use only the correct key.
- Next, select your location.
- Switch your phone to tone mode work. At the request of the robot (the automatic telephone system works without live operators), you need to dial the numbers on the phone that are indicated in the "Step 2" section and then enter the code received from the robot in the "Step 3" section. Then click “Next” and wait for the activation success message.
Windows 7 activation via the Internet
Automatic activation over the network is the fastest and easiest option, requiring a minimum of user actions. If you have a license key, you can activate the system in this way already at the installation stage. Suitable for any editions of Windows 7: maximum, professional, both home and initial.
- Select "Activate Windows over the network" from the list.
- Enter your product key (exactly the same as when activating by phone). Key validation may take some time.
- If the key does not pass the verification, make sure that you did not mix it up. So, the key from Windows 7 maximum, as in the case of activation by phone, will not work for home and vice versa.
- If the key matches, you will see a message stating that the activation was successful.
In addition to the option with permanent connection to the Internet, there is a way to activate using a modem connection. It may be convenient for you if you have a modem.
Pirated activation of Windows 7
A variety of “pseudo-activators” for Windows 7 have been released in great numbers. In them, in one way or another, the Windows Activation Technologies system is bypassed or blocked - that which is responsible for legal activation and after the end of the trial period blocks the work of Windows. “Pseudo-activators” either “deceive” the counter of the remaining days of the trial, forcing the system to “think” that 30 free days have not yet passed, or force it to accept a fake activation key, or modify some of the system files so that the lack of activation generally ceases to affect the operation of Windows .
Most pirate activators are as simple as possible to use and work on the principle of launching, pressing a button and you're done. There are universal activators that work on all editions of Windows 7 and are highly specialized, for example, only for Windows Ultimate or pro.
Here are some of the illegal activation methods that exist today:
- modification of the SLIC table in Computer BIOS where system and software licensing information is stored;
- emulation of a SLIC table at an early stage of PC boot, which is “suggested” to the system instead of a genuine one;
- using KMS services (key management services) in two versions: online - to activate the professional and corporate editions of Windows 7 and offline (via KMS virtualization), with which the maximum and home editions can be activated.
Let's take a look at a live example of how one of the activation hacking utilities works.
Download activator Windows 7 Loader 2.2 on one of the active links, unpack and run it. This utility designed for all editions of Windows 7 edition: maximum, professional, etc., both 32 and 64-bit versions. In our example, Windows maximum is used.
Must be disabled before starting. The file must be run as an administrator.
In the activator window, just click the “Install” button, the program will do the rest by itself, including restarting the computer. After that, activation information will appear in the Status line of the Installation tab - the word Licensed. This means that your system is activated and now you can install updates as if your license was genuine.
To deactivate the key, just click the “Uninstall” button in the same window. Everything is simple.
How to remove Windows 7 activation
Deactivation or removal of activation information from the system may be necessary when you are going to restore the computer to the factory state, for example, before selling, so that the buyer has the opportunity to activate the system with his own key. And your key will remain with you and can be used on another machine.
The method works on any boxed edition of Windows 7 (maximum, professional, etc.). It is not suitable for OEM versions, since in them the system is physically “tied” to the PC motherboard.
On the screens of those computers that use an unactivated Windows version 7 or activation crashed after the update, the inscription is displayed "Your copy of Windows is not genuine" or a similar message. Let's figure out how to remove the annoying notification from the screen, that is, disable authentication.
There are two options for disabling authentication in Windows 7. Which one to use depends on the user's personal preference.
Method 1: Editing the security policy
One of the options for solving the task is to edit the security policy.
- click "Start" and go to "Control Panel".
- Open section "System and safety".
- Follow the inscription "Administration".
- A list of tools will open, in which you should find and select "Local Politics...".
- The Security Policy Editor will open. Right-click ( PKM) by folder name "Restricted Use Policy..." and from context menu select "Create Policy...".
- After that, a number of new objects will appear in the right part of the window. Go to directory "Additional Rules".
- click PKM in an empty space in the opened directory and select the option from the context menu "Create a hash rule...".
- The Create Rule window opens. Click the button "Overview…".
- opens standard window opening a file. It needs to go to the following address:
C:\Windows\System32\Wat
In the directory that opens, select the file called WatAdminSvc.exe and press "Open".
- After completing these steps, you will return to the rule creation window. In his field "File Information" the name of the selected object will be displayed. From drop down list "Security level" select value "Forbidden" and then press "Apply" And OK.
- The created object will appear in the directory "Additional Rules" in "Security Policy Editor". Click again to create the next rule. PKM in the empty space of the window and choose "Create a hash rule...".
- Again, in the rule creation window that opens, click "Overview…".
- Go to the same folder called "Wat" at the address given above. This time choose a file named Watux.exe and press "Open".
- Again, when you return to the rule creation window, the name of the selected file will be displayed in the corresponding area. Again, from the drop-down list for selecting the security level, select the element "Forbidden" and then press "Apply" And OK.
- The second rule has been created, which means OS authentication will be disabled.
Method 2: Deleting files
The task posed in this article can also be solved by deleting some system files responsible for the verification procedure. But before that, you should temporarily disable the regular antivirus, « Windows Firewall» , remove one of the updates and deactivate certain service, since otherwise problems may occur when deleting the specified OS objects.
- After you have deactivated your antivirus and "Windows Firewall", go to the already familiar previous method chapter "System and safety" in "Control Panels". This time open the section "Update centre".
- A window opens "Update Center". Click on its left side on the inscription "Viewing the log...".
- In the window that opens, to go to the update removal tool, click on the inscription "Installed Updates".
- A list of all updates installed on the computer will open. It is necessary to find the element in it KB971033. To facilitate the search, click on the column heading "Name". This will build all updates in alphabetical order. Search in a group "Microsoft Windows".
- Having found the desired update, select it and click on the inscription "Delete".
- A dialog box will open where you must confirm the removal of the update by clicking on the button "Yes".
- After the update is uninstalled, it is necessary to disable the service "Software Protection". To do this, go to the section "Administration" in "Control Panels", which has already been discussed in the discussion Method 1. Open element "Services".
- is running "Service Manager". Here, just as when deleting updates, you can arrange the elements of the list in alphabetical order for the convenience of finding the desired object by clicking on the column name "Name". Finding the name , select it and press "Stop" on the left side of the window.
- The service responsible for software protection will be stopped.
- Now you can proceed directly to deleting files. Open "Conductor" and go to the following address:
C:\Windows\System32
If the display of hidden and system files is disabled, then you must first enable it, otherwise, you simply will not find the necessary objects.
- In the directory that opens, look for two files with a very long name. Their names start with "7B296FB0". There will be no more such objects, so you can't go wrong. Click on one of them PKM and select "Delete".
- After the file is deleted, do the same procedure with the second object.
- Then return to "Service Manager", select an object "Software Protection" and press
As you can see, if your system activation has failed, then it is possible to disable the annoying Windows message by deactivating authentication. This can be done through setting the security policy or by deleting some system files. If necessary, everyone can choose the most convenient option for themselves.
