Why the mouse does not work

Computer mouse Today is one of the most "invisible" components, which, when buying a computer, few people pay close attention. It is understandable - inexpensive, special service does not require, easily replaceable. However, this does not eliminate any user from problems associated with its incorrect work or errors, with this associated. A lot of questions may arise about this. The fact that today less and less manipulators is connected to the motherboard not through the PS / 2 connector, but via USB, the trouble has not been linked. Consider the main malfunctions associated with incorrect operation of the mouse. We will agree immediately: we will not talk about outdated manipulators with a ball inside, for they have long been riveted in the fly. Now on the tables exclusively LED mice, they will talk about them. First consider typical errors associated with all types of mice (using PS / 2 and USB connection).

Operations with wireless mice are carried out at the free other USB ports!

Why the mouse does not work. Some mouse buttons do not work.

The first thing comes to mind is incorrect work. Any modern operating system in their installation Files Already contains mouse drivers, so installing this driver almost always passes perfectly. There is few reasons for which this driver can "fly out." Moreover, the mouse cursor monitor appears on the monitor screen indicates the presence of a driver. However, check for availability installed Driver Mice in Device Manager Equipment List:

My Computer Properties - Equipment Tab - Device Manager

Select Mice and other indicating devices. The absence of yellow or red icons indicates the correct definition of the device by the system.

Another thing, if we are talking about gaming or office versions of the mouse, i.e. Special solutions for her. And not in the sense of prefabricated design or pseudo-breakdown manipulator with characteristic curvature lines. Speech O. additional keysLocated directly to mice that are designed to perform special functions. Here without installation special Driver Do not do, and this may be hidden. Make sure that this model uses latest versions Drivers. Naturally, it is necessary to delete previous drivers from the system if the mouse has been replaced with another. Thus, if the main mouse buttons are the right and left keys, the scroll wheel and the wheel button - perform the functions properly, and other buttons do not work, most likely, the manipulator drivers are most likely to blame.

Further. The reason may be trivial - rust, corrosion, breakdown of plastic parts inside the manipulator. Even in the apartment and the office with a high humidity mouse can tide such a nuisance. It is especially brightly manifested on wireless mice. Remove the lid and examine the contacts rechargeable batteries. Clean if necessary.

Why the mouse does not work. The cursor does not move.

Mouse does not react to any manipulations. Check in any way USB ports. Sometimes refuse to work (disconnected in BIOS or not connected physically, and sometimes subject to optional uSB connectorsinstalled by computer collectors) are those ports that are connected to facial or top panel. It is fashionable, convenient, but sometimes introduces additional load on the motherboard. For now sells a huge number of devices with USB connectionThat is proposed to connect not to a computer (lanterns, fans). Take care of the motherboard. Experience the performance of ports using other devices ( USB keyboard, another mouse), go to another connector. The ideal option will be the rear panel connections. After change the connected connector, be sure to restart the computer.

But ..., the mouse is operational, for USB ports You are also confident. However, the pointer on the screen is worth a stake. And what is characteristic, just a couple of days ago everything was fine. But after updating Drivers With the help of special programs ( Driver Pack Solution or Driver Booster) Mouse does not work. What to do?

The situation here is clear: an updated, but unscrew for this configuration driver successfully replaced the previous one. And why are you without regard to update the driver on the already working devices? In the afield, science. However, correct. It will have to cure, you have to actively use the keyboard (if the cursor fails to move from the place).

The very first action - try to go out Safe mode And try the work of the mouse from there. There is an option that the work driver will manifest itself.

Control Panel \\ All Control Panel Elements \\ Recovery

Choose a date before the update. It is very likely that it will work.

Immediately. The following method is the most attractive to delete any problem driver that seems to you is the cause of your trouble.

This path is ternere. It will be difficult for the fact that the mouse does not work, and the Windows navigation will be difficult ... However, this option has a more directed attack vector: we need a driver-culprit. And for this purpose, one small program InstalledDriverList is very useful. Installation program does not require. Run the executive file from the downloaded archive. After a couple of minutes, the Utility window will give all the drivers with guts. And green The drivers used by the driver are illuminated, yellow Disabled. By the way, scroll down the list of arrows down - you will find red, Think: it is possible that this instance is superfluous on your system and causes some of the inconvenience.

Well, we need columns under the name File Created Time and File Modified Time ( Time of creation and Time change). Click on them, and drivers are grouped by time to create and modify. Now, focusing on the date of the occurrence of problems, you can accurately assume that one of them is to blame. Their location can also be seen on the FileName column. Open Device Manager:

Start - Perform - devmgmt.msc.

This is how the device manager sees the mouse drivers:

The principle is clear, I think. The utility is informative, and delete the selected driver from the program window will not work. But you see the path to it and the date of appearance, they (if a few) are a few names you know on the device dispatcher - it remains to be found and removed from the folder. As you can see, most of them sits in the same directory.

Mouse does not work: chaotically and randomly moves around the screen.

A characteristic malfunction for PS / 2 mouse, but is also found at the LED when cable oversight. Remove the connector and carefully inspect both connectors. Pins on the mouse cable should not be swung, on the "Mom" connector motherboard Contacts should be clearly guessing without failures. If something calls suspicions, leave further manipulations and try another mouse or go to the USB connector: damage to the wires in the shell visually can not be detected.

The mouse works well ...

but sometimes noticeable fight or slipping vertically or horizontal. Replace or buy, finally, a good rug. If it did not happen on the perfect surface of the change, re-read the paragraph from above.

Mouse continues to show the previous symptoms windows themselves pop up additional features The context menu - the mouse lives his life, but the connectors work, the rug can be proud of. Discharge the mouse. The reason, apparently, in the echoing of the mouse signal cable. Select damage damage is not easy, you will find - well done. If the computer is installed in the office, where are the computers of colleagues, check, and not whose is a innocent joke?

Why the mouse does not work or does not work double-clicking.

Probably, the mouse settings associated with the dual-click recognition time were configured. Check the way:

Start - Control Panel - Mouse

Adjust the speed you need double pressed. Just move the speed slider and leave you like.

Mouse sticks or slows down

And it doesn't matter whether there is a rug or you just chosen on the table. The problem is exacerbated by the fact that on another computer, the question of the mouse disappears. And, it means, the question of the mouse itself disappears - the problem lies in settings of the system itself. It is possible that you should familiarize yourself with the content of the article. And it is worth paying attention to to identify the drivers interfering. However, there is still a couple of nuances.

The brakes or "friezes" in working with the mouse (and not only) may be a consequence of the improper work of a large number of devices, processes and services. So I turn right away to business, and if you completely desperately decide the question, why the mouse does not work, try everything:

• update the drivers to the graphics adapter (the mouse is directly related to video connections; and the video driver may be last modelHowever, its improper installation can manifest itself in other devices)
• temporarily disable all network connections on all network cards
• disable drivers Realtek. to sound devices (Temporarily stop the Process Task Manager Realtek audio.exe.)
• disable Cortana.
• drivers ATI Catalyst. were noticed for creating problems, because of which the mouse does not work. If you find in the list of services ATI HotKey Pollerdisconnect its autorun in the service properties and try after rebooting.

Feb 24.

Why doesn't the mouse work?

Hello everyone! In this short post, I would like to tell you about why the mouse may not work on the computer. The other day I happened, later I earned the mouse again and I decided to write an article about this. There are several ways to do it. Well, let's start.

1 way - restart the computer

The cup of all this happens due to the failure of the operating system or drivers. One way to return the mouse to work is to restart the computer. In my case it helped, I earned the mouse again. Therefore, the most efficient and convenient way is to restart the computer.

2 way - verification of drivers

If you did not help the method number 1, then you need to check the drivers. Make these actions will help you the keyboard, buttons are used for this: Tab, Windows, Shift + F10, arrows. We go into my computer \u003d\u003e Properties \u003d\u003e Device Manager \u003d\u003e Mouse and Other Indicating Devices. If you see opposite the inscriptions "mouse and other indicating devices" an exclamation mark, it means that you must reinstall the drivers on your computer.

3 Method - Check the Mouse Performance

If both of the above methods did not help you, then you need to make sure that your mouse is working at all. To do this, double the mouse in another USB port. If you have another computer, you can use this way or check the mouse's performance in your friends. If your mouse does not work then, then it will be necessary to spend a little. Well, on this I finish my post. I hope my tips helped you return the mouse to work. Bowl of all helps method # 1 to restart the computer. At least in my case he helped. On this I say goodbye to you. So far! Yours faithfully, Albert Karamov.

Computer is a complex machine. Users are often encountered with a variety of problems with the equipment connected to it. It is necessary to know how without much difficulty can fix one or another problem. Then work at the computer will only bring pleasure. How to be if on this machine suddenly stopped working mouse? Why is this happening? What advice and recommendations give each other users? Is it possible to somehow set up a computer mouse so that it work in full force and did not give trouble to the user? Understand all this is not as difficult as it seems. Especially if you know everything possible options Event development.

Damage to wire

The first option that only comes to mind is damage to the device for connecting the device. Most computer mice are still joined by the wire. Accordingly, the problem does not have space for Bluetooth models.

It is required to check the integrity of the connection wire. It should not be shifted or damaged. Otherwise you have to buy a new mouse. After all, the replacement of the wire, as a rule, does not make sense.

How much the price is dependent on many factors. On average, the usual USB model without additional buttons will cost 600-800 rubles. You can then purchase the problem with the problem under consideration do not have to face at all. After replacing the device, everything will work in full force.

Connectors

On the PC suddenly stopped working mouse? Why is this happening? The following event development option occurs regardless of which model was connected. After all, it is about damage to the connection connector. For example, due to a long time using the nest.

Nobody is insured against this problem. Damage is well visible on mouses that are connected through the PS / 2 socket. But with USB connectors everything is much more difficult. It is difficult to notice their damage.

It is proposed to allow the situation to simply connect the component to another jack. If the problem lies precisely in damage, the mouse will work literally after a few seconds. No results? Then you need to pay attention to other options for developing events.

Marriage

Changed a USB mouse? It is likely that the fault of everything is a production marriage. As a rule, it is found almost immediately after purchasing a new component.

Marriage is not subject to repair. It is required to attribute the non-working mouse to the store along with the check. There the device must exchange. Or return money to the buyer. In any case, the mouse will take care of the examination. She will definitely understand whether marriage is really wines.

Important: Actual only for a new device. If you work with a mouse for a long time, then marriage has nothing to do with it. So, the output of the equipment is caused by something else.

Breaking

Stopped working mouse? What to do? If we are talking about very old equipment, you can think about what it simply was worn out. That is, broke. In general, as practice shows, mice breakage - a rather rare phenomenon. But it still takes place.

You can try to fix the device. To do this, the mouse is given to the service centers. Most often, such a reception does not give any result. The only solution is new pC mouse. The price has already been said depends on many factors. You can buy a conventional mouse for 600-800 rubles, but there are also game models. Their cost is about 1,500-2,000 rubles. It all depends on user preferences.

New mouse purchased? Then the time to connect it. And everything will work in full force. Only so correct the situation with the device breakdown.

Drivers

But this is not all the causes of the problem being studied. What if the mouse stopped working? In fact, there are a lot of options. The following alignment is often found on the game models of devices. We are talking about missing drivers.

As a rule, when the new equipment is connected, the operating system searches for drivers and install them automatically. In the case of conventional mice, everything is simple. Often it is enough to wait a few minutes - and everything is ready for work! But the gaming models of the device require additional drivers. Without them it will not be possible to use the connected equipment in full power. It is likely that the component will not work at all without the installed software.

The set with the mouse is included installation disk with drivers. Before using the equipment, you will have to try to establish the appropriate software. After that, all the functions of the device will fully work.

And if twitching what to do? It is likely that the drivers are damaged. And because of this, the equipment settings were damaged. Required or reinstalling software, or update it. I will cope with these tasks even a beginner user.

Viruses

The mouse has stopped working sharply on the computer, but all previously listed problems do not have the place? What to do? Why can such problems arise with equipment?

All wine viruses. It is likely that the computer is infected with trojans or other virtual infections. Malicious software can not only destroy the performance of the operating system, but also output the connected equipment. Mouses quite often "fall under distribution." There is no wonder this.

User noted that he twitches the mouse cursor? Or does the equipment begins to work badly, although all previously listed problems are already excluded? It's time to check the operating system antivirus program. If malware is detected, it is subject to treatment and removal (when healing is not possible). Next will have to clean system registry and reboot. On this, all malfunctions in the work of the equipment and the OS will generally cease. But not always. Sometimes it is required to produce full reinstall operating system so that it starts working properly. To the part, the humility will return immediately after the treatment of the system.

Incompatibility

Almost everyone possible reasons The problem is listed. There are still two options for the development of events. Stopped working mouse? On the modern computers Such an event is not uncommon. And the cause of everything becomes the incompatibility of the equipment.

Actual mainly for owners of Windows 10. With this operating system, many components do not work. It is detected immediately after connecting devices. The situation is allowed in several ways:

1. Reinstalling the operating system on a compatible component. Computer requirements are indicated on the package with the mouse.
2. Buying new equipment. In hencefight, it is necessary to separate attention to the requests put forward by the computer.

No more options for fixing the position. The last problem remained, which causes the mouse refusing from work.

Settings

In some cases, the wines can be shot down equipment settings. It often concerns the gaming components. Required special program To configure the mouse. It will help to establish the operation of the equipment and use all the device buttons to the maximum.

If the component is a game, you can usually find a special settings application right complete with a commodity. Otherwise you have to download software separately. For example, you can pay attention to the X-Mouse Botton Control. This program to configure the mouse helps make a real gaming manipulator from the device. Play with customized equipment will be easier than simple. Conveniently and without difficulty!

Nevertheless, each program setup has its own functions. Typically, to improve the work of the equipment help prompts that are available in all such applications. As soon as the settings are exhibited, the mouse efficiency will return!

Did you think that the mouse suddenly stopped working at the time of writing some important report? If this suddenly happened, it is not necessary to immediately run into the workshop, it is worth calming and determine what is the problem. As a rule, it is solved pretty quickly, and the mouse can be repaired without any help independently and within a few minutes. And how to do it, we will tell in this article.

Types of computer mice

Depending on the type of mouse, you need to seek the cause of the fault. To work with a laptop are used:

1. Touch panel, often it is also called touchpad. It is embedded directly in the laptop.
2. A wireless mouse that works at the expense of two transceivers, while one of them is built into the mouse itself, the other is connected to the laptop.
3. Wired mouse connected to a computer via USB port.

Types of faults

Any of these mice can stop working, and, as a rule, they have different faults. But there are a number of common breakdowns, the same for everyone. These include:

• Failure B. operating system. To eliminate it, it is usually enough just to restart the laptop.
• Problem with drivers. If the restart of the computer did not help, then, most likely, the reason is the work of the drivers responsible for the operation of the mouse. You can check this by performing the following actions:

1. Go to My Computer;
2. Click the Properties tab;
3. There you need to select "Device Manager";
4. Click on the "Mice and Other Indicating Devices" tab, the driver will be specified there. If not, then you will have to install the appropriate software.

If after performing these manipulations device I did not start working, then the solution to the problem will have to search already depending on what kind of mouse is used.

Touchpad does not work

The touch panel on a laptop can either stop working, or function with interruptions, for example, the cursor is twitching, small lags arise, the touchpad is unstable reacts to the movement of the fingers. What is this happening?

• Wet or oily surface of the touchpad. To eliminate this problem, it is enough to wipe it with a clean napkin.
• Incorrect settings in Windows. To solve this problem, you need to go to the "Start", then click on the "Control Panel". In the upper right corner we find "View", in the menu select "small badges", in the dropping list, click on the "Mouse" button. In the "Poard Parameters" that appears, you can install pointer speed. If the speed is made too low, there may be problems with the movement of the pointer. After will be made needed changesThey must be saved.
• The touchpad does not respond to all touch to it. This means that the touch panel is most likely disabled. Some laptops have an image on the desktop, a warning that the touch panel is disabled. there is different methods Its activation:

1. Click on the special button To turn on the touchpad, if it is on the keyboard.
2. Press the FN + key combination. Some of the F1 - F12 buttons. But here you need to be very careful in order not to accidentally disable an important function. To avoid this, you need to search on these buttons a finger icon pushing to a square with a cross.
3. Sometimes the touchpad is disconnected due to the connection to the laptop of another mouse. To activate the touch panel again, you can try to disable the external control device.
4. Turning on the touchpad through bIOS system. In order to go there, you need to press one of the keys: F1, F8, ESC or DELETE. Then you need to select the Advanced or "Internal Pointing Device" tab, to set "Enabled".

If no of the above options does not help, the reason that the touch panel does not work, most likely, is a mechanical breakage. In this case, the laptop will have to give a repair professor.

Wired mouse does not work

Despite the fact that this kind of mouse is already a little outdated, many still continue to actively use it. If such a mouse suddenly stopped working on a laptop, you need to try it to plug to another computer. If another device does not see it, it testifies to breakage. Here everyone chooses what to do with a broken mouse - to give to repair or just throw out. If she earned, then the problem is in working with a laptop. To solve it, you can take the following steps:

• As a rule, now all wired mice are connected to a laptop via a USB port, which are usually several on the same device. If the mouse does not work, it may indicate the port breakdown. You can check it simply by connecting the mouse to any other USB port..
• Try to put new drivers. It may happen that as a result of the system crash, the old drivers flew away, so the mouse stopped reacting. To put a new software, you need to go to the "Control Panel", to the right in the upper corner find the "Minor Icons" button, click on it, in the drop-down menu select the System section. In it, select "Device Manager", click on "mouse and other indicating devices". The next step will be the removal of the HID - Compatible Mouse. After all these actions are executed, you will need to connect the mouse again. New drivers are installed, and the wired mouse must earn again.
• Some laptops do not have simultaneous operation of the touch panel and mouse. To start functioning the mouse, you will have to turn off the touch panel, for this you need to press the FN + F9 key combination. The combination can be different, it can be found in the documentation or search on the computer keyboard the corresponding symbol. In addition, there is a chance that the laptop has a special software that blocks the simultaneous operation of the touchpad and mouse. If you correctly do the settings in it, then this problem will be solved.
• Mouse control can be disconnected via BIOS. To solve this problem, you will need to log in and perform the following steps: go to the "Integrated Peripherals" section, make sure that about the "USB Mouse Support" item is indicated by the "Enable" status. If it is defined as "disabled", it will need to be changed. After that, only save changes in the settings will remain.

Wireless Mouse does not work

Ease of use of such kinds of mouse lies in the fact that it does not connect with a computer with a computer, it gives more freedom in managing it. But this advantage can be the cause of the problem. Therefore, if the wireless mouse has stopped responding, you need to perform the following steps:

• Check if the LED works. If it glows, it means everything is fine. If not, it is necessary to make sure that the problem is not related to batteries. To do this, you can insert them into any other device and make sure that they are workers.
• If the mouse begins to hang, then you need to click on the special button located directly on the mouse. It is responsible for switching on / off. After clicking for a few seconds, wait, then turn on again.
• Make sure that the mouse responds to the transmitter that is inserted into the USB - port of the laptop. To do this, you need to get it and stick again, you can also try Also insert it to another port.
• Check whether the mouse stopped working, somehow with software. To do this, you need to perform the same actions as when problems with a wired mouse.

This article featured the main problems that may affect the operation of the mouse. If none of the Soviets helped, then there is still the opportunity to seek help in service center. The main thing is not to lose heart and hope for a favorable outcome!

Do you have a wireless mouse? Nothing wrong. Each user can solve this problem, regardless of its level of knowledge and training. Conditionally causes of faults can be divided into two types: hardware and software. First include nutritional and connection problems. In the second case, this is incorrect operating system settings.

Hardware fault

Wireless mouse does not work? We start checking the availability of hardware faults. To do this, perform the following actions:

1. We deploy the bottom manipulator up and check the operation of the LED. If it is burning, proceed with the next stage. Check the state of the "POWER" toggle. It must be in the "ON" position (if any). If the switch is all right, then you need to replace the batteries. If after that the mouse still does not turn on, it means that it can break. An expensive device can be attributed to the service center for repairs, but in the case with a cheap manipulator it will be easier to buy a new one. For the final decision making, it is recommended to check it on another computer and finally verify the malfunction.

So, we need to connect the mouse to a personal computer. To do this, it must have the "Connect" button (there is no one on some devices, in this case, we proceed to the next step). We clamp it for 6 seconds and check the performance. Still a wireless mouse still? Go ahead.

3. One of the most common faults in this case - These are problems with the connection port. Most of these peripheral devices use the USB interface to connect. There are several such nests on a personal computer. Give the transmitter and install it in another port and check the manipulator in operation. If the cursor returned, the mouse earned. This suggests that the problem is in the interface. It may be no contact or connection, "hanging" port. In any case, it is necessary to visually inspect it for damage. If there is no, then check its performance by installing another device (for example, printer or flash drive). If they earned, then, most likely, it was the "hanging" of the port, and nothing terrible happened. Otherwise personal computer Problems with a port that can be solved only in the service center.

Software faults

All the necessary steps described previously are done, and you still do not work the wireless mouse ... This means only one thing - problems with the software part of the personal computer. To eliminate them, perform the following actions:

1. Go to the "Task Manager" through the "Start / Control Panel". Then you need to deploy the "Mouse and other Indicating Devices" section. In the list that opens, there must be your manipulator. If it is recorded as a "HID-compatible device", then you need to go to the official website of the device manufacturer and check the availability of drivers. For some manipulators (for example, SVEN 4500) there is no specialized software. And if it is, it needs to download and install it. For example: Wireless A4Tech Wireless Mode G10-810F. That is how it should be called in the "Device Manager", and it requires an additional software for it.

2. Sometimes the problem can be solved with the help of specialized programs. To do this, you need to install MS Fix IT utilities or Connection Tools. The easiest way to work with the first one. After starting, it will offer you to check the availability of hardware faults. After receiving a positive response, automatic scanning will be made. If the problem is detected, a message will appear with the query. You need to carefully read and either give permission to perform actions or not.

If the manipulations did not give a positive effect, it is better to buy a new manipulator or contact the existing in the service center.

Conclusion

The article describes the possible causes of why the wireless mouse does not work, and recommendations are given regarding their elimination. These tips are simple, so any user can eliminate breakdown without problems.