How to encode a computer when turned on. Board beginners: how to install a password on a computer when turned on

Something it happened that the most important thing we did not talk to you, namely how to install a password on a computer. True, I already wrote, but now few users work in this system, so it's time to talk about this problem for new operating systems, such as Windows 7, 8.1 and 10. This is now we will now.

Of course this is not a panacea. If you wish and skill, you can hack any protection and choose any password, but for simple users (from children, curious relatives and your neighbor at work) is well triggered and easy to install a password on your computer.

Today we will consider installing the password immediately for three operating systems. Surely some of these descriptions will come in handy. You can still install the password and on the BIOS, but we will talk about it another time. And now I will tell you how the password is installed under the administrator account.

The first thing you need to do is come up with a password you want to install on your computer. There should be no names and dates of births, because Such passwords are collected at times, two, three. You need a good password for 8-15 characters, in which the numbers and letters will be present. The main thing is that you can remember it, or write it down somewhere secretly from other people's eyes.

When you enter a password, during installation, do not hurry and carefully look at what layout (Russian or English) you bring it, and I had cases where people after installing the password could no longer enter their system, and I had to hack it.

Windows 7

In operating room windows system 7 Password is set in this way:

The fastest way:

Open menu Start.

Click on the picture of your account.
In the window that opens, select the link " Creating a password of your account».

A window will open in which you need to write a password twice and tip to it.

Password Write in 8-15 characters, and the prompt so that no one can guess your password.

Click the button " Create a password».

Now, when rebooting or enabling the computer, you will need to enter a password.

If you need to move away from the computer for a while, then press the keys simultaneously WIN. + L. And the computer will be blocked. And to unlock your computer, you need to click any key on the keyboard or move the mouse, and enter your password.

Install the password on your computer withWindows 8.1

In Windows 8.1, you can set a password to a computer in several ways. I will describe you one of them.

right click on the menu button Startand select the item in the context menu Control Panel.

In the control panel find " Accounts and family security"And click on item" Changing the type of account“.

Choose your account and click the button " Rename“.

In the next window choose the item " Create a password“.

You can set a password through the parameters (icon on the taskbar). But the way that is described above is much easier.

Install the password on your computer withWindows 10

In the Windows operating system 10, the password is installed through Parameters. You can get there in several ways:

Open menu Start And choose at the bottom left icon with a gear. That's what it is Parameters.

Click right-click on the menu Start and in the context menu click on the link Parameters.

Click on the search icon on and downstairs in the search box writing the word " parameters"(Without quotes). A list of all system parameters will appear. We need simple Parameters With the image of the gear.

I already had a password, so it is written here " Change" But everything else is done exactly as shown in the pictures.

In the first column we write your password. In the second we repeat it, and in the third we write for myself a tip. Write such a prompt so that no one else guess what your password is set. Otherwise, all your works will be in vain.

That's all! You can restart the computer and try logging in under the password.

If something is not clear - ask questions in the comments. I will answer all your questions.

Please note: To fulfill most instructions from this article, you must use a local Windows account with administrator rights.

How to put a password on a computer with windows

If other people have access to your computer, it is reasonable to protect Windows password. So your settings and data will be safe: no one can view or change them without special knowledge. Windows will request a password when you turn on the computer, when changing your account or after the sleeper is output.

Open the "Start" → "Parameters" section (gear icon) → "Accounts" → "Input parameters".
Click "Add" under the Password item.
Fill in the fields according to the prompts of the system and click Finish.

How to put a password on Windows 8.1, 8

In the right sidebar, click "Parameters" (Icon in the form of a gear) → "Changing computer parameters". In the Opening window menu, select "Accounts" (or "users"), and then "input parameters".
Click on the "" button.
Fill in the fields, click "Next" and "Done."

How to put a password on Windows 7, Vista, XP

Open the "Start" section → "Control Panel" → "User Accounts".
Select the desired account and click "Create a password" or immediately click "Creating a password of your account."
Fill in the fields using the system prompts and click on the "Create Password" button.

If strangers do not have physical access To your computer, it is possible to disable protection better. It will save from the need to enter a password each time the system starts.

Use the Windows + R keys combination and enter command line netPlwiz (or control UserPasswords2.If the first command does not work). Press ENTER.
In the window that opens, select the account in the list, for which you want to remove the password, and remove the donkey near the "Require user name and password" item. Click OK.
Enter the password, confirm it and click OK.

Windows will stop requesting a password only when the computer is turned on. But if you block the screen ( windows keys + L), you will leave the system or the computer will switch to sleep mode, then the password request will still appear on the display.

If the option "Require user name and password" will be inaccessible or you want not to disable, and completely remove the Windows password, try another way for more experienced users.

To do this, open the Account Management section on one of the instructions at the beginning of this article.

If in the open section it will be said that you are using the Microsoft online profile (Email and password), disconnect it. Then use the prompts of the system to create a local profile, but in the process do not fill in the password fields.

After disconnecting the account microsoft records The system will stop synchronizing your settings and files on different computers. Some applications may refuse to work.

If local profile will be initially active in the account management menu, simply change the current password, leaving the fields for a new password empty.

When removing the old password, the system will never request it until you add a new one.

How to remove the password when leaving sleeping mode

If you disable password request when launch WindowsThe system can still request it when waking. But you can deactivate this feature separately using these instructions.

In Windows search string, enter "Power" and click on the found link to the section with the same name. Or find it manually through the control panel.
Click "Password Request when Awakening", then "Changing the parameters that are not currently available" and check the option "Do not request a password".
Save the changes.

How to remove a password when waking up Windows XP

Open the "Control Panel" section → "Power supply".
In the window that appears, click the Advanced tab and remove the donkey near the Password item when you exit the waiting mode.
Save the changes.

If you forget the password and can not enter the local profile windows administrator, not necessarily reinstall OS. There is a way out simpler: Password reset. To do this, you will need another computer, USB drive and free utility To reset the password.

Create a bootable flash drive on another PC

Download Lazesoft Recover My Password installer to any available computer.
Run the downloaded file and install.
Connect the USB flash drive to the computer. If necessary, make a copy of files stored on it, since all the information has to be deleted.
Open Lazesoft Recover My Password, click Burn Bootable CD / USB Disk Now! And create blood flash drive Using program prompts.

Load the computer using a flash drive

Insert the prepared USB drive into the computer, the password from which you forgot.
Turn on (or reboot) the PC and, as soon as it starts uploaded, press the transition key to the BIOS settings. Usually it is F2, F8, F9 or F12 - depends on the manufacturer of the equipment. Most often, the desired key is displayed on the screen during the BIOS boot.
Being in menu Bios., go to the section boot bootIf the system has not redirected you right away.
In the Boot section, install a USB flash drive on the list of devices that appears on the screen. If you do not know how to do it, look around - there must be tips about the control.
Save the changes.

If the BIOS is also protected by a password that is unknown to you, then you will not be able to reset password protection Windows using Lazesoft Recover My Password.

Perhaps instead of classic BIOS you will see more modern graphic interface. In addition, even in various old versions BIOS settings may differ. But in any case, the order of action will be approximately the same: go to the boot menu, select the desired USB drive and save the changes.

After that, the computer should boot from the flash drive to which the Lazesoft Recover My Password utility is written.

Reset the password in Lazesoft Recover My Password

Select Lazesoft Live CD (EMS Enabled) and press ENTER.
Reset the password for your account with the help of Lazesoft Recover My Password.
Restart.

After these actions, Windows will stop requesting old passwordAnd you can ask a new instruction at the beginning of the article.

Imagine that you have a brother / sister and you have two different computers. However, your closest relative loves to use your device that is unlikely to like you. What to do, what would anyone be able to even run the computer? The only way out is to put a password on it. The main thing is not to forget it yourself, as it can lead to problems ... Otherwise, this is a completely reliable way to protect, which, however, is easily accurate. However, I do not think that your brother or sister is such experts to deal with this question. There are several solutions that I will tell right now.

Account password

In order to hide your data easier, you can trite to put a password to your account. This method is interesting because the protection is activated literally in several clicks with the mouse and the computer will not even restart.

On the other hand, this is far from the most optimal level of protection, which is accounted for even with a small desire (in Google, for example, you can find solutions that lie in open access). However, as simple protection, this is a very good method.

I will show an example on Windows 7, that is, on one of the most popular operating systems at present. If you have another OS, whether Windows 8, XP or Vista, do not worry, because the actions algorithm for them almost does not differ.

First of all, click on the "Start" button and select the "Control Panel". A window appeared before us with the configuration of computer parameters. Here we are interested only in one item and it is called "user accounts".

Another window has opened where you can make various changes to your account. Here we are interested in the first item, namely, "Creating a password of your account." Press.

Here everything is very simple: you need to enter a password and confirm it. As for the complexity of the password, do not try hard, and then forget it. Even a fairly simple password is unlikely to choose someone, and there is no point in this sense, if this type of protection go down much easier than sitting and selecting characters with numbers. Here you can enter a hint. It is not necessary to do this, but it is recommended - if you forget the password, the tip will help you remember it.

Finally, click "Create Password". Everything. Now, at each entrance, the system will request a password from you. What would not forget it, write it down somewhere on the leaflet and hide the latter.

Block the system via BIOS

I think many of you have been heard more than once that you can put a password through BIOS. This is really so that you have a simple instruction.

First of all you need. Since I already told how to do it, I will not repeat. After that, select the Security section in the menu.

Here you will have the opportunity to set various passwords.

SUPERVISOR PASSWORD. This is not the password that we need. The fact is that the Supervisor Password sets the password to the BIOS itself. What does it mean? And the fact that without this password of the user will not be able to change the BIOS, as simply will not be able to enter it.

User password. This password is similar to the previous one, however the difference is that the user can enter the BIOS, only he does not work out.

HDD Password. And this is exactly what we need because this feature Allows you to set a password to a hard drive.

After you set the password, do not forget to save changes (usually the F10 key is used for this) and restart the computer. Now, with each download, you will have to enter a password.

W. this method There are features. First, not all versions of the BIOS support such a function. And secondly, reset the password is very simple - it takes only to remove the battery on motherboard. However, there are few people know about it, so you can not worry that your closest relative will climb into system unitTo remove the battery. Moreover, getting to it is not as easy as it seems.

Parental control

There is such an interesting option in Windows as parental control. Of course, I would not call her Panacea, but it copes well with the tasks set. For example, you can easily block a number of unwanted programs and games for children or, for example, to set a limit on the use of the computer. Agree, this is quite good functionality.

To use this feature, first of all, you must install a password to the administrator's account, as mentioned in the first part of the article. Then you need to create any account.

Click on the "Start" button and go to the "Control Panel". Here are looking for the "Parental Control" section.

A new window has opened. Here we choose the account (not administrator).

Put a tick next to "Enable using current parameters", then exhibit the necessary parameters. There is nothing difficult in this. After the parameters are set, do not forget to click OK, to save the changes.

Now your child or any other person who has been prepared by the changes will not be able to install the game, it will not be able to play it, because to change the parameters you need to know the administrator password.

Amended questions? Contact!

Put a password on the computer it is not very difficult task. The main thing is to know where and what to press what settings to perform. In this article, we describe in detail the process of installing the password when the computer is turned on in two ways. A simple way using the standard Windows properties and a more advanced method using the BIOS settings. Also dadim useful advice from the portal "Your World PC", to limit access to important settings and information on your computer.

This method is the easiest and most popular. When installing the password on the entrance to Windows user A special window will be displayed in which you will need to enter a password for entry:

Password setup instructions:

In our example, we will perform the setting on the Windows 7 operating system. If you have Windows 8 installed or more old version Windows XP, then the settings are exactly the same, so you can safely use this instruction.

Click - "Start" and select the item - "Control Panel":

Go to the menu item - "User Accounts":

And enter a password to enter Windows:

It is best to come up reliable password And burn it on a sheet of paper. And the prompt should be written so that other people cannot guess. Remember that the tip will be visible to all users!

After the password has been configured, you can restart the computer. During download operating system A password input window should appear:

How to put a password for downloading a computer to bios?

A password for enabling a computer can be delivered not only using the standard properties of the operating system, but also with the help of BIOS. Especially effective this method will be in the event that you want to prohibit access to people who are with a computer on "you". The advantage of this method is that the password window will not appear after windows downloads, and to her. To choose or bypass such a password is very difficult (in the case of the first method, this is much easier).

Instructions for setting

However, not all bIOS version Support a password installation of a computer loading (do not confuse the login password in the BIOS)! According to this S. you begin to check the ability to configure such a password.. To do this, go to the BIOS. To get there at the same time press the F2, F4 and Delete buttons during the computer reboot. If everything is done correctly, a window of this type will open before:

Then go to the "Security" tab and see if there is a string called "Password on Boot " If such a line is there, change its configuration from "Disable" to "Enable" and set the desired password: