Cancel windows 10 upgrade. Starting the system in safe mode

Windows 10 installs updates automatically in the background. Most of the time this is good, but sometimes you get an update that breaks everything. In this case, you need to uninstall that particular update.

Windows 10 is more aggressive about updating than previous versions. For the most part, this is a good thing, as far too many people never bother to install updates - even critical security updates. However, there are many PCs and configurations that stop working correctly after an update. There are several ways to delay the installation of bad updates. You can prevent certain types of updates from being downloaded automatically. And, starting with the Spring 2017 update, you can easily pause or defer non-critical updates for a month or more.

Unfortunately, none of these strategies work if you've already downloaded and installed an update that broke something. This gets even more complicated if the update is a major new build of Windows, such as the Fall Creators Update released in September 2017. The good news is that Windows provides a way to uninstall major build updates and smaller, more typical Windows updates.

Removing Major Build Updates

Windows 10 has two different types updates. In addition to traditional patches, Microsoft sometimes releases larger "builds" of Windows 10. The first major update for Windows 10 was the November 2015 Update, which made it version 1511. The September 2017 Fall Creators Update is version 1709.

After a new build is installed, Windows saves the files needed to uninstall the new build and revert to the previous build. The catch is that these files are only kept for about a month. After 10 days, Windows will automatically delete the files and you will no longer be able to return to previous version without re-installation.

Note: Reverting a build also works if you are part of Windows programs Insider, and you help test new, pre-unstable builds of Windows 10. If the build you're installing is too unstable, you can revert back to the one you were previously using.

To cancel the build, press Windows + I to open the Settings app and then click Update & Security.

On the Update & Security screen, go to the Recovery tab, and then click the Get Started button under Go back to previous Windows versions 10".

If you don't see the "Go back to a previous version of Windows 10" section, it's been more than 10 days since you upgraded to the current build and Windows has cleaned up those files. It is also possible that you ran the Disk Cleanup tool and selected the Previous Windows Installations files to remove. The build is handled in much the same way as new versions of Windows, so you uninstall the build the same way you uninstall Windows 10 and go back to Windows 8.1 or 7. You'll have to reinstall Windows 10 or restore your computer from the system backup to return to the previous build after those 10 days have passed.

Also, note that rolling back a build is not a way to permanently discard future new builds. Windows 10 will automatically download and install the next major build that is released. If you are using the stable version of Windows 10, this may take several months. If you're on the Insider Preview build, chances are you'll get the new build much sooner.

Removing typical Windows updates

You can also uninstall regular, smaller updates that Microsoft rolls out sequentially - just like in previous versions of Windows.

To do this, press the Windows + I button to open the Settings app and then click Update & Security.

On the Update & Security screen, go to the Security Center tab. windows updates", and then click the "View update history" link.

On the View Update History screen, click the Uninstall updates link.

You will see a familiar uninstaller interface showing the history latest updates, sorted by installation date. You can use the search box on the right upper corner window to search for a specific update by its KB number, if you know the exact number of the update you want to uninstall. Select the update you want to uninstall and click the Uninstall button.

Please note that this list allows you to uninstall updates, installed windows since installing the previous "assembly". Each build is a new list with new minor updates applied. Besides, there is no way to avoid specific update forever as it will eventually be ported to the next major build of Windows 10.

To prevent a minor update from being reinstalled, you may need to download the Microsoft "Show or hide updates" troubleshooter and "block" the update from automatic download in future. It's not necessary, but we're not entirely sure that Windows 10 will eventually try to re-download and install updates that you've manually uninstalled. By according to Microsoft, even the "Show or hide updates" troubleshooter can only "temporarily prevent".

Windows 10 updates will hopefully be more stable than ever thanks to a new Insider program, which allows people to test updates before they are rolled out to everyone, but you may find that at some point it becomes necessary to remove the problematic update and wait for a fix.

Even if the user did not back up the system upgrade on his computer to an operating system with an index of 10, the data on the PC from Microsoft resources will be stored in memory and the device will regularly and persistently recommend installing Windows 10. A notification is displayed in the tray and there is no way to refuse to download files .

Therefore, a large number of people have already asked the question: “How to abandon windows 10?”. Below are specific steps to address the above issue and at the same time to ensure the correct further functioning of the "Update Center".

Step One - Installing the Client

From the Microsoft support.microsoft.com resource, you need to download and install the current client of the Operating System Update Center. This is important to do before opting out of upgrading to windows 10. After installation required option client (for 32 or 64 bit system) you will need to restart your PC.

Step two - cancel in the registry

To cancel the update, you will need to do the following:

Ready. Performing these steps will save the computer from installing the tenth version. However, it is desirable not only to cancel the transition to a new OS, but also to delete the directory with the files of the intrusive Dozens.

Step Three - Getting Rid of Downloaded Windows 10 Files

They are located in the "$Windows.~BT" folder and take up about 4 GB of space on your computer.

In order to delete this directory, you must use the following algorithm of actions:

These steps allow you not only to cancel and abandon the installation of Dozens, but also significantly free up disk space on your computer.

How to prevent the tray notification from appearing?

To resolve this issue, do the following:

What if the owner of the computer canceled the installation, but then changed his mind and decided to install a new OS?

You should take the following steps to restore the original state of the PC:

open a window "Update Center";
enter the list of hidden upgrades and re-activate "KB3035583";
then open and uninstall the parameter "DisableOSUpgrade";
restart the PC.

Microsoft resources will again begin to receive offers to upgrade to Windows 10 and will download the files of the new OS for its subsequent installation.

The Windows 10 Update service, which coordinates the operation of the Update Center and the installation of new packages, is somewhat annoying for many users. Not only does the download and integration of updates into the system take place in the same way, some installed components can cause quite serious malfunctions in the OS. Just the other day, it became known that the latest released packages after installation lead to the fact that when rebooting, blue screen which is almost impossible to get rid of. Let's see how to stop Windows 10 updates if they are in the active phase of downloading or installing them. Several techniques are also proposed to completely deactivate such processes. For both cases, there are several options for action, which use only the tools of the operating system itself.

How to stop Windows 10 updates if they are running, in the simplest way?

In principle, if a pop-up message appears in the system tray stating that there are available updates or redirection to the update service occurs, for example, through a regular antivirus, then everything is simple.

How to stop Windows 10 updates? Elementary! Disable network cable(if you have a wired connection) or disable Wi-Fi. Please note that when you reconnect, downloading updates without further deactivating them in the system settings will continue.

But it also happens that the user does not personally see the activation of the download process, but receives a message about installing updates only when the computer is turned off or restarted. A blue screen displays progress with a warning that the this moment you can't turn off your computer. In the case of using the restart through the "Start" button, a line will be shown with a proposal to restart and install updates. Doing this is not recommended. Further actions will be discussed separately. But when the installation has already begun, you need to forcibly turn off the computer or laptop by long pressing the power button, and then boot into safe mode and cancel the installation. But more on that later.

Disabling the update for wireless connection

The question of how to stop Windows 10 updates when using a Wi-Fi-based wireless connection is even easier to solve (although there is no pause button as such to suspend these processes in the system).

To do this, in the system tray, through the notification icon, you must select the activation of the Airplane mode. This mode disables all wireless connections. Windows update download pause does not work in this option for wired networks. But, again, when recovering wireless communication the download will continue.

You can also use the option to set a metered connection, in which the system will not download updates. This method, by the way, is suitable for all those users who really have traffic restrictions, and not just for pausing the download or installation of available packages.

Suspending an update via the command line

In general, by and large, the above actions can lead to failures and errors when installing updates. Therefore, only one main tool is used to correctly pause a download or installation - the command console (cmd in the Run menu).

It requires three commands:

net stop wuauserv - stop the service windows update;
net stop bits - deactivate intelligent transfer service;
net stop dosvc - stop the Delivery Optimization service.

The re-enabling of all components is done in the same way, only in the stop commands it is changed to the start parameter. When executing both disable commands and reactivate commands, a system reboot is not required.

Deactivating Windows 10 Update via the Options Menu

The question of how to stop Windows 10 updates manually has been sorted out a bit. Now let's see what tools the system offers the user if he wants to disable the search and installation of updates altogether.

Disabling Windows 10 Update Center can be done in several ways. The first method is to use the options menu and the corresponding update and security section, and then enter Extra options for the "Update Center", where it is necessary to enable a reboot notification in the installation method selection list (in this case, the system will not restart without your consent), check the box next to the "Postpone update" line, and also deactivate receiving updates from several places.

Windows 10 Local Group Policy Editor

Now let's move on to the main tools that allow you to partially or completely disable Windows service 10 update. The solutions proposed for consideration are in many respects similar to each other, since, by and large, they duplicate each other. And first, let's look at the Windows 10 Local Group Policy Editor, which is called by the gpedit.msc command entered in the Run menu.

Here, in the configuration through administrative templates and system components, you need to go to the "Update Center" section and edit the automatic update settings option. double click or through the RMB menu, a window with settings is called up, where “Disabled” is set as the current parameter, after which the changes are saved by pressing the OK button.

Services section

Yes, indeed, the method proposed above allows you to disable the search and installation of updates, but, so to speak, only at the global level, since the service itself remains active at the moment. Thus, the essence is to not only turn it off, but also stop its current action. For this, as it is already clear, the corresponding section is used, called from the Run console, by the services.msc command (you can also use the administration menu for access).

In the editor, you need to find the "Update Center" and proceed to editing the settings, using either RMB with a choice of properties, or double-clicking. Disabling is done by pressing the "Stop" button, and in the startup type, so that the service does not work in the future, the disabled startup type is set.

System registry

Finally, a complete deactivation of updates can be done through system registry. The editor, like all previous tools, can be called through the Run menu by entering the regedit command in it.

Here you need to use the HKLM branch and the SOFTWARE and Microsoft sections, where you go through the policy and update directories to the final AU directory, as shown in the image above. As a rule, there is no key responsible for disabling receiving updates, so you will have to create it manually (a 32-bit DWORD parameter), give it the name NoAutoUpdate, and set the current value to one by editing the parameters.

As you can already see, such actions are a repetition of the settings group policies, however, the register has more high priority. This means that you can change the policy settings in the registry, but the settings in the registry cannot be changed in the policies.

How to cancel the installation of updates?

In a situation where the updates are still installed, there are several methods to undo the changes made. In the simplest case, canceling Windows 10 updates is done by restoring the system to a point that preceded the time the packages were installed. Again, updates will not be installed only if you follow the steps above to deactivate the relevant services.

On the other hand, you can use the same options menu and the update and security section, where in the Update Center you need to go to view the update installation log, select the latest or unnecessary packages and use their removal.

Similarly, you can uninstall updates through the "Control Panel", in which the section of programs and components is selected, after which you go to view installed updates by clicking the hyperlink on the left. Next, an unnecessary package is selected, and the line for its removal is called through RMB.

Finally, to remove updates, you can use the command console, in which you first need to display a complete list installed packages(line wmic qfe list brief / format: table), remember or write down the required package number (they all start with the letters KV), and then enter the uninstall command wusa / uninstall / kb: number, where number corresponds to the update number that is indicated after the combination lit.

How to avoid installing unnecessary or problematic service packs

But, suppose the user did not completely disable the update, and does not want to install some packages during a second search. In this case, their automatic integration can be disabled.

To do this, in the Update Center settings, a manual search for available updates is set, after which unnecessary ones are selected in the results found, and then the hide command is used. Similarly, updates are disabled through the programs and components section with the option to view installed packages.

To remove system build updates, you must use the restore point with the option to return to the previous version. But this option can only be used if the user has not deleted the Windows.old directory, which stores all previous configurations. If this folder does not exist on your hard disk, you can perform a factory reset of the system with full reset parameters.

Disable driver updates

With questions related to how to stop Windows 10 updates and the services responsible for them, I think everything is already clear. It remains to consider the ban on spontaneous installation of drivers.

To do this, the “Run” console is called, the line rundll32 newdev.dll, DeviceInternetSettingUi is written in it, after which the line for providing a choice to the user is activated in the option selection window that appears, and the item that prohibits installing drivers from the Update Center itself is activated.

Note: if you still need to install driver updates, use automated utilities like Driver Booster, which download the most latest versions Software from the Internet resources of device manufacturers, and then integrate new drivers into the system without user intervention.

Afterword

That, in fact, is all that concerns stopping, completely or partially disabling the installation of updates in Windows 10. However, despite the presence of enough a large number tools that allow you to do such operations, completely deactivating update services is not recommended, since the main packages are mainly intended for patching security holes and installing updates for some of the main platforms that may be involved when using modern programs or games. The best option will be the setting of parameters under which the system is allowed to search for available packages on its own, but the right to choose the installation is left to the user. So you can immediately eliminate the installation of unnecessary or potentially faulty updates.

Those wishing to update their operating system before new Windows 10 face problems. If you've tried to reserve an update but aren't receiving it or don't find the update icons in the taskbar where it usually appears, after reading this article, everything will fall into place and you will get the best operating system from Microsoft at the moment. The solution to the problem is carried out in several ways, the meaning of which does not differ significantly. This is a forced update via:

command line;
"Windows Update";
media application Creation Tool.

Through the Help Center

Such an update is implemented through the launch of the "Support Center" in several ways.

Launch via control panel

We find the installation icon in the form of a white flag in the taskbar and click on it with the left mouse button.

Click on the link with the appropriate title.

The installation tool for Windows Update will launch.
In the left frame, click on the link that says: "Search for updates."

Through the "Control Panel"

Such a launch is implemented by sequential actions:

We go to the Control Panel, which is launched through Start.
We visualize its contents in the form of large icons.

Run Windows Update immediately » .

Via Start

Open the Start menu and enter the appropriate installation prompt in search line.

We launch the "Update Center".

In the Windows response that appears, click on the "Get Started" button.

After the Update Center has begun to do its job, you will have to wait a bit. When the message appears: "Upgrading to Windows 10", perform the following steps:

Click on the "Get Started" button.

We are waiting for the Windows 10 update to download and the installer to prepare before installing the downloaded files.

Upon completion of the download, before installing the upgrade to Windows 10, the installer will prompt you to restart the computer.
We confirm the restart so that the upgrade to Win 10 starts.

Before the PC boots up, updates will be installed, system files will be modified, after which the computer will start with Windows 10 installed.

Command line procedure

This is a forced update. — simple and fast way get a windows 10 update - usage command line.

We reserve the download of update files (after that, the corresponding icon will appear on the Taskbar).
Turn on automatic update(The Update Center service must start with the operating system).
Clean up the "SoftwareDistribution\Download" directory in Windows folder.
You will then need to run a command interpreter with administrative privileges.
Enter "command" in the Start search bar, call context menu corresponding icon and click "Run as administrator".

Insert or enter the command “wuauclt.exe / updatenow” into the line, confirming its execution by pressing “Enter”.

In a few minutes (not immediately) it will start Windows boot 10 through the OS update tool.
After the download is complete, the computer will ask you to restart, as a result of which updates to your operating system to Windows 10 will be installed.

Using the Media Creation Tool

The update program will help not only update the operating system to Windows 10, but also download an image with its installation files, and also create bootable flash drive for clean Windows installations 10. This method is remarkable in that it does not require reservation and a long process of waiting until the turn comes - the user only needs to select the OS version and confirm its download, and the installation will be carried out automatically. All user data in the event of an update will be saved. MCT also allows you to roll back the state of the system to the previous version from a backup copy for 30 days, if something does not like it or does not go well.

Download the Media Creation Tool and run it.
Select the item as in the screenshot and click "Next".

We are waiting for the application to download the necessary update files to Win 10. At this time, you can minimize the window and go about your daily business.

The completion of the process will be marked by the appearance of a window with the terms of the license.
We carefully study them and, if accepted, click "Accept".

Be sure to select the first item if you do not want to reinstall all applications and lose your own data.

We check the specified settings and click "Install" to get Windows 10.
The version of "tens" is determined automatically. In our case, Windows 10 Pro was installed.

We are waiting for the completion of the update installation operation.
You can still cancel the upgrade at this step if you change your mind.

Confirm PC restart.
After that, its parameters will be configured. After a couple of minutes, the computer will restart again and boot with the new OS.

Possible problems

Windows 10 has auto-update enabled with no option to decline or cancel it. Often automatic installation updates cause graphics system crashes, which can cause monitors to turn off. One of the first updates from Microsoft included numerous bugs related to the security system, which led to the constant termination of the “explorer.exe” process responsible for the window interface. The reason for this was that the update process, one of the first updates of Windows 10, could not complete correctly. Therefore, a message appeared about the impossibility of the correct completion of the installer, and the cancellation produced a mandatory restart of the PC. After which the process would start all over again, and this could continue in cycles due to updates being forced by Microsoft with no option to cancel or opt out of the installation process.

Recently, these problems are being solved, but no one is immune from their recurrence or the emergence of new, possibly more serious ones.

(Visited 4 906 times, 1 visits today)

Those who want to upgrade their operating system to the new Windows 10 face problems. If you've tried to reserve an update but aren't receiving it or don't find the update icons in the taskbar where it usually appears, after reading this article, everything will fall into place and you will get the best operating system from Microsoft at the moment. The solution to the problem is carried out in several ways, the meaning of which does not differ significantly. This is a forced update via:

command line;
"Windows Update";
Media Creation Tool application.

Through the Help Center

Such an update is implemented through the launch of the "Support Center" in several ways.

Launch via control panel

We find the installation icon in the form of a white flag in the taskbar and click on it with the left mouse button.

Click on the link with the appropriate title.

The installation tool for Windows Update will launch.
In the left frame, click on the link that says: "Search for updates."

Through the "Control Panel"

Such a launch is implemented by sequential actions:

We go to the Control Panel, which is launched through Start.
We visualize its contents in the form of large icons.

Run Windows Update immediately.

Via Start

Open the Start menu and enter the appropriate installation request in the search bar.

We launch the "Update Center".

In the Windows response that appears, click on the "Get Started" button.

After the Update Center has begun to do its job, you will have to wait a bit. When the message appears: "Upgrading to Windows 10", perform the following steps:

Click on the "Get Started" button.

We are waiting for the Windows 10 update to download and the installer to prepare before installing the downloaded files.

Upon completion of the download, before installing the upgrade to Windows 10, the installer will prompt you to restart the computer.
We confirm the restart so that the upgrade to Win 10 starts.

Command line procedure

This forced update is an easy and quick way to get a Windows 10 update - using the command line.

We reserve the download of update files (after that, the corresponding icon will appear on the Taskbar).
Turn on automatic updates (the Update Center service must start with the operating system).
Clear the "SoftwareDistribution\Download" directory in the Windows folder.
You will then need to run a command interpreter with administrative privileges.
We enter "command" in the Start search bar, call the context menu of the corresponding icon and click "Run as administrator".

Insert or enter the command “wuauclt.exe / updatenow” into the line, confirming its execution by pressing “Enter”.

After a few minutes (not immediately), Windows 10 will start downloading using the OS update tool.
After the download is complete, the computer will ask you to restart, as a result of which updates to your operating system to Windows 10 will be installed.

Using the Media Creation Tool

The update program will not only help you upgrade the operating system to Windows 10, but will also download an image with its installation files, and also create a bootable USB flash drive for a clean installation of Windows 10. This method is remarkable in that it does not require backup and a long waiting process until the turn comes , - the user only needs to select the OS version and confirm its download, and the installation will be carried out automatically. All user data in the event of an update will be saved. MCT also allows you to roll back the state of the system to the previous version from a backup copy for 30 days, if something does not like it or does not go well.

Download the Media Creation Tool and run it.
Select the item as in the screenshot and click "Next".

See also: screen customization hello windows 10

We are waiting for the application to download the necessary update files to Win 10. At this time, you can minimize the window and go about your daily business.

The completion of the process will be marked by the appearance of a window with the terms of the license.
We carefully study them and, if accepted, click "Accept".

Be sure to select the first item if you do not want to reinstall all applications and lose your own data.

We check the specified settings and click "Install" to get Windows 10.
The version of "tens" is determined automatically. In our case, Windows 10 Pro was installed.

We are waiting for the completion of the update installation operation.
You can still cancel the upgrade at this step if you change your mind.

Confirm PC restart.
After that, its parameters will be configured. After a couple of minutes, the computer will restart again and boot with the new OS.

Possible problems

Windows 10 has auto-update enabled with no option to decline or cancel it. Often, automatic installation of updates leads to graphics system failures, which can cause monitors to turn off. One of the first updates from Microsoft included numerous bugs related to the security system, which led to the constant termination of the “explorer.exe” process responsible for the window interface. The reason for this was that the update process, one of the first updates of Windows 10, could not complete correctly. Therefore, a message appeared about the impossibility of the correct completion of the installer, and the cancellation produced a mandatory restart of the PC. After which the process would start all over again, and this could continue in cycles due to updates being forced by Microsoft with no option to cancel or opt out of the installation process.

Recently, these problems are being solved, but no one is immune from their recurrence or the emergence of new, possibly more serious ones.

(Visited 4 285 times, 1 visits today)

windowsprofi.ru

How to Force Upgrade Your Computer to Windows 10

Today, Microsoft officially announced the launch of the Windows 10 update in 190 countries around the world. But some users are having trouble getting the upgrade to Windows 7 or Windows 8.x. Recall that the update is distributed free of charge only for owners of a legal license for Windows 7 and Windows 8.x. And if you are still experiencing problems, then this material is for you.

The method is quite simple. So, what should be done if Windows 7 or Windows 8.1 is silent about the update, although everything is already ready, and the update has been reserved?

Delete the contents of the C:\Windows\SoftwareDistribution\Download folder. After that, delete the $Windows.~BT folder, which is located in the root of the disk. In order to see this folder, you need to turn on the display hidden files. You will need to confirm the action with administrator rights.
After that, run the command line (you can find it in the search for “Start”) as administrator and execute wuauclt command/updatenow .
After some time, the update will start downloading.

There is a way to automatically fix problems, but we do not recommend using it.

And although this way quite official, but it may have side effects. Unfortunately, in the process of fixing errors, new problems may appear that will move to the updated system. Then it will be harder to fix them. We strongly do not recommend using utilities that automatically fix errors before upgrading to Windows 10.

We download a special small utility that fixes problems with updates from the link (you can also try to use this utility here).
Let's launch it. The utility will find and fix errors in the update center.
After that, either wait automatic execution search for updates (every two hours), or go and kick the Windows Update service with the wuauclt /updatenow command in a command prompt running with administrator rights.
If everything went well, after some time you will see the download or the availability of the update.

Keep in mind that we currently have a separate list of questions and answers, as well as an active discussion in a special material.

thanks for the hint to Sergey Dmitriev, Madne5 and others

Noticed an error? Select the text and press Ctrl+Enter!

onetile.ru

How to upgrade to Windows 10? Forced upgrade to Windows 10.

Want to get a new version of Windows for free, but can't find the update icon?! This simple article will help you solve this problem!

Before the release of Windows 10, many with older versions of OS had a mysterious icon on the taskbar that suggested "Reserve" free update to the new OS version.

But not everyone went so smoothly and not everyone can just take and install a new version of the OS.

In this case, there are only 2 solutions:

Forced update via command line.
Forced update through the Action Center.

And so, let's start with the simplest and most correct way:

1. First, we need to find the checkbox icon in the lower right corner of the screen on the Windows taskbar.

2. Click on it and select "Open Support Center".

3. Now in the window that opens, in the left column below, go to the item "Windows Update".

5. We wait a couple of minutes while Windows checks for new updates.

6. In the Windows response that appears, click on the "Get Started" button.

7. We are waiting for the update to download and be ready for installation.

8. After downloading and preparing the update, Windows will ask you to restart your computer.

9. We agree and reboot.

That's all in this manual. If something didn’t work out for you, try the second method, or write in the comments, the author will answer you!

This method is a little more complicated, but it works!

1. Press the key combination " Windows button" and the key "R" (Russian "K").

2. In the window that appears, write "cmd" and click "OK".

2. The following window should appear;

3. Now copy the following text "wuauclt.exe / updatenow".

4. In the black window that opens, press the right mouse button and select "Paste".

6. The window will look like this:

7. Now follow these instructions:

That's all! 😉 If you have any questions, please write in the comments below this article!

LookDevices.ru

How to force download and install the Windows 10 Free Upgrade Wizard (KB3012973)

A new version Windows - Windows 10 is officially published today and available for everyone to download in the background Windows users 7 and Windows 8.1, who applied for a reservation and a free upgrade of their operating systems to Windows 10 (via the transition notification mechanism). Such users should be prompted to upgrade to Windows 10.

For Windows 7 and Windows 8.1, the Windows 10 Upgrade Update utility is available through Windows Update and is contained in update KB3012973. The KB3012973 update is 2-3 GB in size (depending on the system version) and must be downloaded in its entirety from the Internet.

In the event that you do not want to wait for this update to download and install (or if the update wizard has not started), in order to quickly begin the process of updating to WinX, you can force download and install the update for your version of Windows 7 and Windows 8.1.

Method 1: Command wuauclt.exe /updatenow

To start the upgrade process to Windows 10 on Windows 7 and Windows 8.1, open a command prompt with administrator rights and run the command:

wuauclt.exe /updatenow

After executing the command, open the Windows Update item in the Control Panel and check if the process of checking system requirements and getting Windows 10 has started.

Once the download is complete, you will be prompted to start the Windows 10 upgrade process.

Method 2: Installing KB3012973 using PowerShell

Another way to start upgrading to Windows 10 is to manually install KB3012973 using PowerShell. To do this, we need a special module - Windows Update PowerShell Module

Advice. If both of the described methods did not help you start the upgrade to Windows 10, you can upgrade using the usual boot disk or ISO Windows 10 created with Windows utilities 10 Media Creation Tool.

winitpro.ru

How to Force Upgrade Your Computer to Windows 10

woodhummer 29.07.2015 - 21:49 Workshop

Finally, July 29 has come and the first lucky ones have begun to receive the release of Windows 10. In this regard, as WCCFTech reports, a trend towards a significant increase in the load on Internet channels is beginning around the world. To update the OS, each computer must download more than 3GB installation files, and from the very beginning of the update channels Microsoft with a volume of 40 Tb / s were loaded by more than a quarter bandwidth. In this regard, during this week due to increased traffic Internet speed will drop significantly.

Force update

Perhaps that is why some computers do not have time to automatically upgrade to "ten". Consider how to force the OS update:

Find the folder C:\Windows\SoftwareDistribution\Download and delete all its contents.
At the root of drive C, find and delete the $Windows.~BT folder (how to show in Explorer and delete hidden folders you know).
From the command line, run wuauclt /updatenow (requires administrator rights).
The update will start after a while.

Don't forget before installing

Make sure your computer meets the minimum system requirements for Windows installation 10.
Before installing a new OS, it will update the old OS.
Be sure to save your license key otherwise you risk losing it.