Installation on a computer or laptop in which there is a DVD drive, no questions cause. With netbooks it's more difficult. Let's look at the options for installing Windows 10 from a flash drive to such devices. Here it is necessary to understand that other ways simply do not exist.

The simplest installation method "Windows 10" from a flash drive on top of the existing system

Actually, it is not necessary to go far for the installation of a new OS. It is installed without any problems or additional actions, as it was with Windows 7 and 8, from the usual USB carrier.

In the simplest version, a program for installing "Windows 10" from a flash drive called Media Creation Tool.. In this case, the new operating system is placed on top of the old (update to a more recent version). It is enough just to start the program to start the download process of the distribution kit with the subsequent installation, where the Upgrade item is selected in the installation parameters, which allows you to save absolutely all previously specified system settings.

How to install "windows 10" from a flash drive with the removal of the old system

Another thing is when the old OS should be removed completely. If anyone knows, this is achieved by formatting a section that will be installed. Only here it is necessary to keep in mind that initially the "dozen" is supposed to roll back (return to the old OS to the state preceding windows installations 10).

As already understandable, after formatting the hard drive or partition hard disk Such an opportunity will be completely excluded. So first think about which option is preferable.

Creating an image

Now consider the method of installing Windows 10 from the flash drive with the condition complete removal existing OS. It goes without saying, you need to download a setting distribution or disk image. If the distribution is not loaded in the form of an image, it will have to create it.

To do this, you can use any utilities that can work with disk images. Then it needs to be written on a USB carrier. For example, in the Ultraiso program, the search file opens, after which the Self-loading menu is used, where the hard disk image of the image of the image of the hard disk is selected (in this case, our flash drive is selected in the appeared window). A warning will arise that all data from the media will be deleted. We agree and begin the recording process.

Note: If the default USB-HDD recording mode is not enabled, it is strongly recommended to use it.

BIOS settings

The problem, how to install "Windows 10" from a flash drive, one is not limited only. To computer system Reacted to such a boot device, in the priority of downloads in the BIOS settings it must be set it first.

Access to BIOS is carried out using the Del, F2, F12 keys, etc. (it all depends on the brand model of the device and the BIOS manufacturer). Here you need to find settings like Boot Device Priority and as the main boot device, specify a flash drive. Such actions can be performed only if the flash drive was inserted into the appropriate port before turning on the computer, noutubka or netbook. Otherwise, the device will not be determined, and it will simply not be in the list of available devices.

Installation process and initial setup

So it happened, and the installation process began. At the first stage, you will need to specify the language, time format and currency, as well as the keyboard layout or input method. Next, agree with the license, after which in the new window we select the item not upgrade, and Custom and activate the installation process.

It remains to wait 10-15 minutes (again, depending on the device model), and at the end of the installation, it is rebooting the system (if it is not automatically produced), go back to the BIOS settings and in the priority of the download to the first device to install a hard disk.

Now let's look at the initial load of the OS. Here you need to select the settings item (settings), and then go to either to fast settings (Express Settings), if you do not need to change the default settings, or use the Customize (Customize), if the basic configuration must be configured. As practice shows, it is better not to change anything.

However, you can play with installations and rebuild them in terms of driver updates, providing privacy on the Internet, providing or prohibiting the system tracking the current location or personal data in some other applications, immediately create a Microsoft account account account and the backup method of its recovery, for example through email or mobile phone, check the created account, provide the ability to save photos or other documents in cloud storage Microsoft One Drive, etc. However, all this is done exclusively at the request of the user itself.

Upon completion of all settings, the installation can be considered completed. The system is ready to use.

Conclusion

Finally, it remains to add that the installation process "Windows 10" from the flash drive is not so complicated. It looks much easier than the installation of the same "seven". Sometimes, however, an error may occur when installing "Windows 10" from the flash drive. This is most often with the wrong bIOS settings, damage to the usb carrier, the lack of free space on the hard drive or incorrect entries in system Registry. As practice shows, the error can appear mainly when updating the existing OS to version 10. In most cases, when installing, so to speak, "from scratch" this occurs extremely rarely.

If you decide to go to new version operating system or install it again, take advantage modern carrierSince installing Windows 10 C flash drive is easiest. Everything modern computers Equipped with a multitude of USB ports, unlike discs, flash drives are more durable and reliable. The developers have tried to simplify the installation process as much as possible, so there is usually no difficulty.

Preparation of flash drives to install Windows 10

Let's start the process from the preparation of the carrier. We use the built-in Media Creation Tools. You can download it.

This method makes sense if there is a key, or in the future you will have to activate the system using special programs. The volume of the flash drive must be at least 8 GB.

After starting, accept the terms of the agreement.

Choose the creation of the Flash Setup Media.

Set language and bit.

Specify that the installation is created. windows USB flash drive 10.

Install the media.

The further process is used by the wizard.

To install Windows 10 with image of ISO. From the flash drive, it is necessary to format it in FAT32 if you have installed UEFI or in the image there are files large by volume than 4GB. To find out which system you have, go to the control panel (through the search).

The click on the Administration section will open a new window.

Look for system information.

Twice click and see all the information.

To prepare a flash drive for installing Windows 10, choose the formatting option (PCM on the media title).

Set properties and click "Start".

You will receive a confirmation request, agree if there are no important data on the drive.

The state state is shown below.

Using any suitable program, mount the disk image. On the example of Daemond Tools.

Open the resulting volume.

Copy Windows 10 installer on the USB flash drive.

Turn the drive to the boot disk, otherwise you will fail to install Windows 10 through the PC flash drive. To do this, open the command prompt on behalf of the admin.

Enter directive bootSect / NT60 G: where "G" - Tag of your drive.

As you can see, drop windows 10 on the installation flash drive is very simple - the usual copy will work if you choose ISO.

Defining order order

We need to put up the download order in BIOS - the flash drive must be in priority to install Windows 10 from the flash drive to the computer.

The stationary PC still remains the possibility of entering the BIOS by pressing the F2 key. If this method does not work, try F1, F10, DEL.

Another method is to hold down shift, causing a reboot of the computer.

Or use special download options in parameters (+ [i]).

When restarting appears blue screenwhere you need to choose: diagnostics - Extra options - UEFI embedded parameters.

When you get to the setup system, look for a clause associated with "boot" and install the main boot disk flash drive.

Installing Windows 10 from a flash drive on a laptop will be possible in the same case, but the order of login to the interface is a bit different. For example, there are Lenovo special button On the housing you want to click and hold to get into the menu. It can be located on the side or near the power button. You can find out the procedure for other manufacturers on official sites.

If you put on top of the available OS, it is necessary to find out which section HDD belongs system disk. Run a COP again and recruit the DiskPart directive - Enter - Disk Volume.

Remember which number it has a section of the C disc, it is bootable.

the main thing

Finally, everything is prepared and the installation of Windows 10 is waiting for us from a flash drive to a computer, step-by-step instruction Further.

Install the USB flash drive and restart the computer. On the first screen, choose language.

To start clean installation of Windows 10 from a USB flash drive, click "Set".

We will be asked to enter the activation key. If you do not have it, click "I do not have a product key".

If you did not have an activated licensed system, you can select and install Windows 10 Pro or another with boot flash drive (In particular, to a new computer).

Take license terms.

The next step is to choose the type of installation. If you install top old systemYou can select an update, then the basic parameters will be saved. This will remain a lot of garbage.

But the selective installation, which will be described later, will allow you to do everything "from scratch."

If we install Windows 10 on a clean computer from the flash drive, you will have to break the hard drive on the volume at the next stage. While he looks like this.

Use the buttons "Format" and "Create"To break the screw as it is convenient for you. System sections Disc 0 Do not touch, since the first is responsible for resetting the device to factory settings, the rest also carry service information.

If you are installed on top of the old system, select the partition that is remembered as a system at the preparation phase. Its formatting will allow you to implement a "clean" installation. To leave the ability to roll back, then select it and click "Next".

If we set on top old version (XP or seven), then remove it, but do not format. The installer from the flash drive will create the desired sectors.

Expectation.

Choosing a country.

Keyboard layout.

You can add another layout.

In the next step, you can set the account microsoft recording. And you can create an autonomous account.

Pin-code step is better to skip.

If created account The developer is connected to the Internet, then you will be offered to use the corporate cloud.

Set privacy parameters (this can also be done already in installed system later).

After waiting, the system will be installed from the flash drive.

Differences between installation on different devices No, since installing Windows 10 on a laptop from a flash drive can in the same way. Only the method of entry into the BIOS may differ.

Problems when installing Windows 10 C flash drive

If the installation has not started at all, check the port - is the drive read? In the case of a positive response, once again open its contents in the explorer and check the image. Complete all steps to prepare flash drives.

When the process is running, when selecting a section, you can see an error when installing Windows 10 from a flash drive "Installation on this disc impossible ".

It is treated either to the formatting of the hard drive, or by changing the settings in the BIOS. The first is not always desirable, so we choose the second option.

Come in Bios in one of the above methods. Change the type of download in EFI on Legacy.

It usually helps. Another option is to select the type of boot drive without the UEFI console, if there is such.

So, we told how to properly install Windows 10 from the flash drive to the computer and led step-by-step instructions. In the comments, you can tell about the pitfalls that you faced.

This article will give advice on how to install Windows 10 using a flash drive without data loss. There are no fundamental differences between installing this operating system with a DVD or CD disc.

An important point is the volume of the cumulative device, whether it is a flash drive or disk. Its volume should be at least 3 GB.

First of all, you need to create a special bootable media with which the operating system will be installed. Best use for these purposes special utility On the official website of Microsoft. Provided you already have license key For Windows 10.

Whether it is possible to put this version of the operating system without a key, and is possible installing Windows 10 on top of Widows 7, I will tell a little later.

What is needed to install Windows 10?

1. Create a bootable flash drive.
2. Send to BIOS Download.
3. Install OS.

How to create media

Download the utility to create a carrier operating wINDOVS systems 10 On the official website of Microsoft, it is precisely the discharge that your system has this moment. You can find out in the "System" tab in the Control Panel or right-click on My Computer and select the "Properties" section.

In this utility you can download Original Operating System Images latest version. In the installation window, you will be offered to select a language and the installed version of the OS. After that, wait until all files are downloaded to the USB flash drive or disk, depending on what you have chosen.

For other cases, when there is already its own OS image, it is simply copied to the USB flash drive. It should be formatted in FAT 32 format. Make it possible with a variety of free softwareas well as with command line or Ultra ISO programs.

IMPORTANT: To ensure that the loss of your data stored on the computer, all files are copied to some outdoor hard Disk, it can also be Disk D.

How to install Windows 10 via BIOS

When the OS image is copied to an external medium (disk or flash drive) we go into the BIOS (or UEFI) and configure the load in the priority of a particular carrier.

To go to the BIOS, you need to restart the computer. When you start uploading a computer, the input is performed by pressing the DEL or F2 keys.

The first option is usually characteristic of stationary computersand the second for laptops. Pay attention to the brand different models computers have different methods BIOS entry.

After entering, go to the Boot Menu section and select the computer boot method. In the window that appears, the installation language will appear, and then install the direct button. A window will appear for entering the activation key of the operating system.

As a rule, this step can be skipped at this stage, of course if you did not have a separate purchase of a license. Next, you will be offered to choose the installed version of Windows and acceptance license Agreement.

The next and, perhaps, the most important and responsible step will be the choice of the type of installation of the operating system. You will be asked to choose from two options:

• simple update of the system;
• full reinstall WINDOVS.

Here we are interested in exactly the second option and you need to click on the "Selective Installation" item.

By selecting this item and the corresponding section, the installation process will begin, which can last for quite a long time, depending on the power of your computer. Especially protracted will be the so-called simple computer for some time after the installation and reboot. All this time, the preparation of components will occur. It is important here not to hurry forcibly rebooting the computer, unless of course the expectation has not exceeded in two hours.

After loading components, the Settings window will appear. windows settings 10, where it will be necessary to configure the basic parameters like a language, region, keyboard layout, account creation, etc.

Immediately after the desktop appears, dozens, you will need to download drivers for installation. Although the operating system should automatically download them, yet it is worth checking the driver package and make sure of availability.

Problems when installing Windows 10 and their solution

At the stage of selecting disc partitions to install the OS, an error may occur:

Installing Windows for this disc is not possible. The selected disk contains the MBR partition table. On EFI Windows systems can only be installed GPT disk

The reason for this kind of conflict lies in the fact that you boot from the media in the opposite mode of what is currently on the disk to which you want to install a new operating system. The solution to this problem can be carried out in two ways:

1. Conversion of a hard disk. You need to convert it from MBR in GPT.
2. Go to bios, or rather boot Menu. And change the type of boot with EFI on Legacy.

Error 0x8007025d.

Its occurrence may be for several reasons.

• Such trouble at the very beginning testifies to failure boot sectorBecause of this, copying files stops. Need to check the working capacity of the hard disk, random access memory and other components of the system. You need to dig there, after fixing the error when installing will disappear. IN some cases, will help formatting hard disk before installing the OS.
• Error code 0x8007025d at the very end can pop up because there is not enough space on the hard disk.
• When installing Windows from a flash drive or external disk, The reason for the occurrence of an error can be wounded in themselves. Check if all the installation files have been completely copied to the external medium, try to overwrite them again.

• Test the memory cells using special programs. Sometimes you need to overwrite setup files on CD.
• Do not forget to set the boot priority in the BIOS, according to the type of media, which is used to install Windows.

Warves installation

If the power of your computer leaves much to be desired, some problems may occur at certain stages of the installation.

For example, long preparation for installation or its hanging. Here it is necessary to wait just for some time until it unloads, and take any actions only after a long time - an hour and more.

Installation does not start

There may be such a problem as the lack of starting the installation of Windows 10. It is necessary to make sure whether you chose the order of download in Boot Menu.
If everything is correct and the first point in the download is the start of the system from your carrier containing the installation of the OS, then the reason may be in the other.

When a computer is restarted, a short time can pop up the window where you want to press any key to start the installation. You could just not notice him.

You can also advise after rebooting the computer, press the keys from F5 to F12.

See also:

Can I install Windows 10 on the tablet with Android?

The decision to demolish the android system on the tablet and put the top ten can be justified by such reasons as:

• support for certain games only on windows;
• experimental comparison of two android and windows on the tablet.

There are several ways to make this task.

• One of them will be a complete reinstallation of the system, after which the Windows is installed from scratch. It is more complex.
• The easiest way to use various emulators of this operating system, from which you can choose qmu.

Installation on the tablet is made using the BOCHS application. It needs to download and install on your tablet. Then download the image of Windows in IMG directly.

You also need to download the firmware for our emulator, it is called SDL. After downloading, it is unpackled in any folder on your memory card.

The image of the OS is unpackled in this folder, after which the BOCHS application is started and you can proceed to installation of windows.

In order to successfully happen loading windows 10 from the flash drive, some parameters change in the BOOT menu in the Bios settings. In the menu Booth in the Launch tab, the parameter switches to Enabled.

In the Security tab, the Security Boot Control parameter, on the contrary, you need to turn off, and then go to the Save / Exit tab and save the changes.

And still look a useful video:

Editor's Choice

How to install Windows 10 from a flash drive - step by step instructions + a few tips

The way to install windows 10 from the flash drive does not constitute anything difficult for experienced user Microsoft operating systems.

The same who installs such a platform for the first time or before it came across the distributions already ready and installed on the disk, it is worth learn several nuances - from creating boot media before the features.

Building:

Creating a bootable USB carrier

To create a loading flash drive with operating windows system 10 The user will need a drive with a volume of at least 8 GB - the size of the recorded files, depending on the selected platform variant, can reach 6.5 GB.

It should also be provided for on where Windows will be installed, not less than 16 GB of space - although, taking into account updates and system softwareIt is desirable to leave 40 to 60 GB.

For quick operation of the system, it is best if it is installed on a solidotel drive SSD. - Such an option will cost more, so most of the applications (including games) is worth installing on.

Should be aware : To install, they usually release or create a whole section of the disk. Installation in the already existing and even filled with information volume is not prohibited, but it is not recommended, since it can create unnecessary problems when reinstalling the system.

The next step of creating a flash drive with the system is to download the appropriate image from the official Microsoft website (for example, a 32-bit or 64-bit version of the system).

Undesirable to install a system with extraneous resources - In addition, such platforms are unlicensed, with them you can download and malicious code.

After that, you can download and install the disk recording program from the image - for example, (the utility is paid, but will work during the trial period of 30 days).

Further steps to create a USB flash drive with windows look like this:

• To the computer, to which the system image downloaded, a flash drive is connected;
• Running ultraiso program And the button is pressed "Trial period";

• The "File" and the "Open" command is selected in the menu, after which the image with the system opens;

• The section selects the rigid disk image recording command;
• In the window that opens, it is specified to which media files will be recorded (if the flash drive is installed one, the definition occurs automatically);

• Press the "Write" button.

Before recording the utility can request permission to format a flash drive.

The process of transferring files takes a few minutes.

After the recording is completed, the utility should be closed, (if the installation is performed on another PC, and not on which the record was recorded) and go to the following steps.

Installing download from a flash drive in BIOS

Before installing the system, in most cases, it requires a change in the system loading method - instead of the default rigid (or solid-state drive), you will need to specify as boot disk USB flash drive.

To do this, it will be needed to move to the BIOS computer or laptop interface and change its settings.

To go to the BIOS, you need to click on the computer download defined key - Most often it is listed on the screen.

For each computer and, moreover, the laptop exists its own way of entry - in most cases it is F2 or DEL, but sometimes it is F1, F8, F10 or ESC.

Should be aware : Key depends on the model motherboard. If the user could not determine what exactly press for, you should check several options. As a rule, this is a button from the top row of the keyboard.

After entering the interface menu required perform such actions:

• Using the arrows and the Enter key, find the Boot tab;
• Find and open Hard Disk Drives;

• Select the first line where it is usually already specified. hDD, Press ENTER and select a USB flash drive in the dropping menu;
• Return to the previous window and find item or Hard Disk Boot Priority;

• The flash drive is installed as the main disk when loading.

Now you can exit the menu, saving the changes made (the F10 key) and restart the computer.

From now on, the installation of the operating system begins.

Important : In some interfaces (especially if it is not BIOS, a UEFI) names and location of partitions and menu items will be different. But, in general, the steps to change the boot disk will be approximately the same.

The start of the installation of the OS.

If all previous steps (flash drive recording and changing the boot method) were performed correctly, the operating system is automatically installed on the reloaded computer.

Certificate of startup starts is the Windows 10 emblem on the screen.

First steps

Installing the operating system begins with a sentence of selecting a language, time format and method for entering information from the keyboard. In Russian-speaking versions of the operating system for all three default items, Russian is installed.

The following steps of installation Must be such:

• The "Set" button is pressed and the system recovery is selected;
• Enter the key to activate operating system (not necessarily do immediately - sometimes item can be skipped, after installation);

• Select the edition of the operating system (at the discretion of the user, if there is no license yet - or the key to which was purchased);

• Read the license agreement, agree with its terms and to click "Next";

• Select Installation type operating system.

There are several options for installing windows.

The user can update the software by restoring system files And saving all the parameters, programs and settings - while the old platform remains in the Windows.old folder.

The advantage of this method can be called no need to reconfigure web browsers and others. useful applications, reinstall utilities and games.

Another way - Selective installation of the system, allowing you to get "clean" Windows, without the remaining system files.

At the same time, the user can run partitions to anew or use already created discs.

The result of this process becomes the appearance on the screen of the desktop "Clean" operating system, requiring spending some time on setting up.

Version 1703.

For version 1703, released less than a year ago, the final steps of installing Windows have some differences.

Setup is performed in a few steps:

• The region is selected from the proposed list - the functionality and system as a whole depends on this, and separate applications. If desired, the settings can be changed later.
• Select the first and additional (optional) keyboard layout and select a key combination to switch between them. By default, English is basic.

• Select a setup method (most users are suitable for the "For personal use" option).
• Configure parameters for the main account - at the same time, in the same way as for the 1607th version, you should either connect to the network and log in to the account, or enter temporary data in the offline mode, which can be subsequently changed.
• Enter the user password (or select the "Next" option to set it later).
• Configure privacy options by selecting the necessary items.

After that, the user is enough to wait until the system is installed, and perform all the necessary settings.

The same actions are necessary for the final stage of the assembly installation 1709.

System Setup

After the system is set to complete its setting - including downloading drivers of all connected and built-in devices (including sound, network, and,).

Some of these control programs are automatically installed by the system, the remaining set is performed manually.

It is advisable to do this as follows:

• for laptops - from the site manufacturer's models in the Support section;
• for desktop PCs - from the manufacturer's resources installed on it;
• for video cards - from AMD or NVIDIA web pages.

Drivers should not be installed from third-party resources or using type programs.

At the same time, control programs are often outdated, and sometimes viruses are downloaded with them.

Important : After all control programs are installed, and the operating system is activated, it is recommended to create an image to restore the system. This will help the next time to install the system is not entirely "from scratch".

Now you can install antivirus program And the minimum user needed package applications.

Possible problems when installing

By installing the operating system from a USB drive, the user may encounter a number of problems.

Sometimes a flash drive is simply not perceived by a computer or laptop, and the cause is the wrong selected recording format.

In order to guarantee the compatibility of the computer with the BIOS, when using the Ultraiso utility, you should select not USB-HDD +, and USB-HDD + V2.

The flash drive may not read for other reasons. For example, due to malfunction uSB ports or problems with the drive itself. In the first case, the question is solved by using another connector, in the second - recording for a new flash drive.

Faced with the inability to complete the installation of the operating system sometimes accounts for optical drive owners connected. The problem is to stop loading the operating system files at 25-84% - the error message 0xc1900101-0x20004 appears on the screen. The problem is solved simply - just disconnect the cable from the drive, returning it to the place after installation.

In the list of problems with the installation, you can find the error C1900101-20017.

It occurs solely when trying to install the system on a computer with overclocked pentium processor G3258. Error is eliminated by disconnecting overclocking or one of the core cores.

It is often an error and a PC or laptops with a UEFI-load enabled. To solve the problem, it is recommended to change the BIOS settings. Make it is easy - just go to the BIOS interface when loading the system, find a parameter with the name and change its value to "disabled".

Summarizing

Installation from a flash drive is the fastest, and sometimes the only one (many modern PCs and laptops are no longer equipped with a drive for disks) method to get a modern operating system.

This will take not so much time and knowledge.

Depending on the performance of the computer, all the steps will take no more than 3 hours, and the starting user will receive a certain experience of working with software Microsoft.

The official birthday of Windows 10 is the last of the versions of the OS from Microsoft, it is considered July 29, 2015. The company-developer then suggested all windows users 7 and 8 hold free updates Systems to Window 10.

During the year, each of them could freely go to the Microsoft website and launch the update process. Today it is already impossible to do it. However, it is possible to install the operating system by taking advantage of USB flash drive or DVD disk. Both processes at the initial stages of work have their own characteristics.

Preparations for installing Windows 10, creating a loading flash drive.

The simplest option for creating a backup installation disk - Use USB (from 4 GB, but better to take 8 GB). Before work, the flash drive is formatted and the previously downloaded original ISO image of the operating system is written to it. How to do this below.

At the moment, users have the ability to install Windows 10 Pro at 32 (x86) and 64-bit (x64) version. To install Windows 10 Pro x64 requires support for components (processor and motherboard) Architecture of this system.

On computers S. optical drive It is possible to create backup DVD. You can use the RUFUS utility to work with USB, and for DVD - ImgBurn. Not bad program for recording images - Ultraiso. But she is paid, although there is a test 30-day period.

Almost done!

Now you need to go through some more important steps. After Windows 10 installer is downloaded, select your language settings and click the Next button. Take the terms of the license agreement from Microsoft and follow the instructions of the installer. When you "clean" the OS installation, select the disk section and make it active. In this case, the partition is always formatted.

Finishing installation.

During the installation of Windows 10 PCs, it will automatically restart several times. During this time, you can configure your Microsoft account and log in to it. The appearance on the downloaded desktop screen is the end of the OS installation.

You will only connect the device to local network, as well as install the necessary drivers and the program you need. Set all questions in the comments. Successes!