How to enable boot from flash drive in bios. There is no boot from a USB flash drive in the BIOS - how to set it up? How to work with UltraISO

Today I will tell you how to enable booting from a USB flash drive in the BIOS. various manufacturers. It doesn't matter which version you have, the order of gestures will be as follows:

1. Insert our bootable flash drive into the USB port of your computer. I recommend inserting it into the port located directly on the motherboard, i.e. from the back of the system unit.

2. Turn on the computer and press the key Delete(or F2) to get into the BIOS. Depending on the manufacturer and BIOS version, other keys (Esc, F1, Tab) may also be used, so you need to carefully read the prompts on the screen.

In BIOS, we can only navigate through the tabs using the keyboard.
Below I will detail this process on the example of the most used BIOS versions.

Attention! Remember that if you are installing the operating system from a USB flash drive or CD and have selected a boot device in the BIOS, and not in the boot menu, then after the first automatic reboot Windows boot you need to enter the BIOS again and return to boot from the hard drive. If this is not done, autoload from a USB flash drive or CD will work again, and Windows will again begin the first stage of the procedure. installation.

Configuring Award Bios to boot from a USB flash drive

Award Bios:

First, let's check if the USB controller is enabled. We go to "Integrated Peripherals". We go down with the arrow on the keyboard to the item “USB Controller”. Press the “Enter” key and in the window that appears, select “Enable” (also using “Enter”). Opposite “USB Controller 2.0” should also be “Enable”.

Exit this tab by pressing Esc.

Then we go to "Advanced BIOS Features" - "Hard Disk Boot Priority".Now in my example, the hard drive is in the first place, and the flash drive should be.

We stand on the line with the name of our flash drive (Patriot Memory) and raise it to the very top using the “+” key on the keyboard.

Exit here by pressing "Esc".

Setting AMI Bios to boot from flash drive

If, upon entering BIOS, you see such a screen, then you have AMI Bios:

First, let's check if the USB controller is enabled. Go to the tab "Advanced" - "USB Configuration".

Opposite the items “USB Function” and “USB 2.0 Controller” should be “Enabled”.

If this is not the case, we stand on this line and press the “Enter” key. From the list that appears, select “Enabled” (also using “Enter”).
Then exit this tab by pressing “Esc”.

Go to tab "Boot" - "Hard Disk Drives".

Now I have a hard drive in the first place, but I need to put a USB flash drive here. We become on the first line, press “Enter” and in the window that appears, select our Patriot Memory flash drive.

It should be like this:

We leave from here through "Esc".

Select "Boot Device Priority". Here, the first boot device must be a USB flash drive.

Press Esc.

Then we exit the BIOS, saving all the settings made. To do this, go to "Exit" - "Exit & Save Changes" - "OK".

Setting up Phoenix-Award Bios to boot from a USB flash drive

If, upon entering BIOS, you see such a screen, then you have Phoenix Award BIOS :

First, let's check if the USB controller is enabled. We go to the “Peripherals” tab - opposite the items “USB Controller” and “USB 2.0 Controller” should be “Enabled”.

Then we go to the “Advanced” tab and opposite “First Boot Device” we set “USB-HDD”.

After that, exit the BIOS, saving the changes. To do this, go to "Exit" - "Save & Exit Setup" - press the key "Y" - "Enter"

That's practically everything you need to know in order to boot from a USB flash drive. In my article, I described the process of setting up the Bios of the most popular versions: Award and AMI. The third example shows Phoenix Award Bios, which is much rarer.
V different versions BIOS described procedure may be slightly different. But the main thing is that you understand the principle of tuning itself.

By the way, I would also like to add: in order to choose which device to boot your computer from, it is not necessary to change the settings in the BIOS. You can call up a special menu immediately after turning on the computer to select boot devices (this can be done by pressing F8, F10, F11, F12 or Esc). In order not to guess with the keys, we look carefully at the monitor immediately after turning it on. We need to have time to see an inscription like this: “Press Esc to selest boot device”. In my case, it was necessary to press “Esc”.

Not with DVD disc, as many people usually do, but from a USB device, then the first thing you need to do is go to Bios and set the boot from a USB flash drive. Otherwise, you won't get anything. Since, when booting, the computer will access either hard drive, or to DVD.

In this article I will try to describe in as much detail as possible and for different versions of BIOS.

Booting from flash drive in bios

I won't be wrong if I say that laser discs are slowly receding into the background. More and more are being released personal computers without DVD-ROMs. Distribution operating system also does not have to be on DVD, it can easily fit on a flash drive. I won't be surprised if they soon disappear, yielding to cloud storage. One way or another, but as long as the technology exists, it must be able to use it.

How to get into Bios

Each manufacturer of computers and laptops has its own buttons to get into the BIOS, such as "F1", "F2", "TAB", etc.

But the most common option is of course "Delete".

Being directly in the BIOS, we are interested in the "Boot" section - it is there that the parameters that we need are changed.

Phoenix Award

Now it's a rarity. I remember him from old computers with operating Windows system 98. I just had one.

The first thing we do in this and subsequent cases is to check if the USB controller is activated. To do this, we need to go to the "Peripherals" section.

And opposite the inscription "USB Controller" the parameter "Enable" must be set. If it is missing, it should be included. This is done with the help of Top and Down, - go to the desired line, press Enter and select.

Now we press "ESC" (this is the exit from the previous menu) and head to "Advanced". Here we are interested in the "First Boot Device" line, where we set the value to "USB-HDD" using the above method, as shown in the screenshot below.

Award

Again, the very first thing is to see if the controller is connected. Heading to "Integrated Peripherals".

We find "USB Controller". Use Enter to select the "Enable" value.

We return to the main ESC window with an apt, head to "Advanced BIOS Features" and then "Hard Disk Boot Priority".

In the picture above, unfortunately, booting from the hard drive is set. And there should be "Patriot Memory". You can change it with the help of "+" on the keyboard, by going to the desired line.

The next step is to press Enter on the line "First Boot Device". We now have a “CD-ROM” there, and we need to put the “USB-HDD” or “USB-FDD” already familiar to us.

And save the settings by going to "Save & Exit Setup".

AMI

Again, at the very beginning, we check the USB controller for operability. To do this, go to "Advanced" and then "USB Configuration".

Please note that "Enable" is set opposite "USB 2.0 Controller" and "USB Function".

As you can see from the picture below, this moment hard drive is exposed. Using Enter, change the position to "Patriot Memory".

Should look like this.

Then we go to "Boot Device Priority".

BIOS UEFI

For example, I will use a Lenovo laptop.

After turning on, simultaneously press the combination of hot keys En + F2. This brings us to the InsydeH20 Setup Utility. More often it can be observed in laptops from Toshiba and Acer. Use the Up and Down buttons to go to "Security" and, on the contrary, " secure boot» set «Disabled». Attention, I did not highlight this word in vain!

Now we go to "Boot" and look. Should be UEFI opposite "Boot Mode".

In order to install an operating system on a computer, you need to configure it to boot from a USB flash drive or disk. Therefore, in today's article, we will consider how to boot from a USB flash drive in BIOS. This must be done to begin installing Windows. Since if you just insert a bootable USB flash drive with the system, then nothing will happen. Your old OS will start to boot. If you have not yet downloaded the latest version of the operating system, then read the article - How. Let's now proceed directly to the configuration process itself.

After restarting the computer, it is not always necessary to enter the BIOS of the motherboard to configure. First, let's try to use boot menu(boot menu). To do this, before the system starts to boot, you must press the "F8" key, thereby a special window should appear with a list (boot menu) of connected drives. V this menu you need to select our flash drive with the OS recorded on it.

After that, should begin, namely copying installation files to the hard drive. After the computer restarts itself, Windows installation will start from the hard drive.

If for some reason you are unable to open the boot menu, then let's start figuring out how to boot from a USB flash drive in BIOS. But first, I want to briefly tell you what a BIOS is.

BIOS (basic input / output system - "basic input / output system")- a special set of embedded software that implements the application programming interface necessary to work with computer components and devices connected to it.

In order to get into the BIOS settings, you need to have time to press the “Delete” or “F2” button or any other, depending on when the computer boots up. On the monitor, you will at this point in time display the logo of the motherboard manufacturer or information about the processor, memory and hard drives. At the same time, something like this will be written at the bottom of the screen:

"Press Del to Enter Setup"
"Press F2 for Settings" or similar.

After clicking on one of the buttons, you will have to get into the BIOS settings. Depending on the fee software basic system I/O may be different. I propose to consider the most popular options, as well as configure them to boot from a USB flash drive.

If AMI BIOS is installed on your board, then in order to set the disk boot order, you and I need to perform the following steps:

Note! The USB flash drive must be connected even before you enter the BIOS, otherwise it will not be detected for you.

If your motherboard is AWARD or Phoenix BIOS, then to configure Windows boot from a USB flash drive, we take the following steps:

On many modern laptops, the InsydeH2O bios is installed and many are faced with the problem of setting the boot order of disks. Let's deal with this problem together. We will do everything step by step so as not to make a mistake.

Note! If you need to install a boot from a CD or DVD, then in the first place you need to put the item "Internal Optic Disc Drive"

After the settings have been made, go to the "Exit" menu section and select the "Save and Exit Setup" item, thereby we will save the changes made and exit the BIOS.

At present, many manufacturers motherboards install instead of the usual BIOS, UEFI software, which has GUI, as well as support for mouse control and a Russified menu. Thus, it makes it easier for us to solve the problem of how to boot from a USB flash drive in BIOS.

If you are lucky, and when you go into the BIOS you see that the graphical interface has loaded in front of you, then you need to go to additional settings by pressing the "F7" key or the corresponding button in the main window. In the menu that appears, you need to go to the "Download" tab and in the "Disk loading order" item, put our bootable USB flash drive in the first place.

After making the changes, press the "F10" key and select the "Save settings and restart the computer" item.

Let's summarize.

In today's article, we have discussed how to boot from a USB flash drive in BIOS. At the same time, I tried to show in as much detail as possible how this is done in different BIOS versions. As a rule, all settings come down to placing the first in line, a bootable USB flash drive or a disk with the system. Many users have difficulty with this, since the interface is in English. But as you can see, the developers are doing their best to adapt the BIOS for all users. This is clearly visible in the new UEFI software.

If you decide to install Windows 10 from a USB flash drive, then one of the steps that you will need to follow is to indicate in the boot settings that the computer should boot from the USB flash drive. So the question is as follows: How to set BIOS to boot from USB flash drive?

In fact, there is nothing complicated here, except that your BIOS may differ slightly from mine and you will have to look for similar buttons.

So, first of all, we need to get into the BIOS. To do this, turn on the computer or restart it if it is already on and immediately after the start we start pressing the DELETE key. We press several times until we see the BIOS program. It may look like this:

On the different computers and laptops, the button to enter the BIOS may be different. For example, on my laptop, you need to use the F2 key. It can also be F1, F8, ESC and others. Of course, in most cases we need to use DELETE or F2 in order to do so. Everything else is less rare.

When the BIOS is launched, it will be possible to proceed with the settings. Using the arrow keys on your keyboard, navigate to the Boot tab and press Enter. There we will need to select the second item Hard Disk Drives. Open it with a keystroke Enter.

As you can see, we are now listed in the first place HDD(HDD).

We go there and in the menu that appears we indicate our flash drive. In my case, this is USB: Corsair Voyager.

By choosing it, it will be in the first place, instead of hard drive. Now go back up one level pressing the ESC key.

We are in a familiar window. We go here to the neighboring item Boot Device Priority and open it.

We get to the first point and click Enter.

We select our USB flash drive again, and it becomes the first place in the priority of downloads. Fine

In others BIOS to boot from flash drive maybe a little differently. For example, on my laptop on the BOOT tab, you immediately need to open Boot Device Priority and then using the keys F5/F6 raise the flash drive to the first place.

It's even easier on my new computer! Everything is in Russian and you can use the mouse. In my case, you need to open the SETTINGS section and go to the tab.

In the new window, select your flash drive.

After we have installed the boot from the USB flash drive, it remains to be saved in the way we already know ( F10 key).

That's all for me today, I wish you to successfully boot from a USB flash drive and install Windows 10 or any other system on your computer or laptop.

How to download from a flash drive old computer, which has BIOS settings no option to boot from USB devices? Today all modern computer devices this opportunity is provided for, because they are modern, but if not in users' homes, then at least in budgetary institutions there are still old PC builds that can only boot from CD / DVD-ROMs, floppy disks or over the network. To deal with such limitations, free program Plop Boot Manager. This is a bootloader with its own menu, which, in particular, provides for the ability to boot from USB media.

The program can be installed in the MBR boot record of the hard disk, while the selection menu bootable media will appear every time you boot your computer. Another way to use Plop Boot Manager is to burn its disk image to a blank and use it only in cases where it becomes necessary to boot from a USB flash drive. Once recorded, such a disc will serve as a bridge connecting the computer and USB devices for their interaction. Boot from a flash drive - be it installation disk operating system, be it a resuscitation or anti-virus Live-Disk - it will be possible by selecting it among the boot options for the Plop Boot Manager environment. Whereas the latter will appear on the screen after setting the computer to boot from a CD / DVD.

To create a CD / DVD with the Plop Boot Manager boot menu, we need to download its distribution kit for writing to a blank disc. We go to the official website of the program and download the archive from latest version Plop Boot Manager.

Unpack the archive.

Of the files in the archive, we only need an image ISO disc. The rest of the contents of the archive with the installation files of Plop Boot Manager in the boot record of the hard disk in our case is not needed.

The next step is to write the disk image to a disc. For these purposes, a lot of different software is provided, you can also use regular means Windows.

A regular CD / DVD burner will require a minimum of effort.

We boot the computer from the recorded disk, setting the boot priority from the drive in the BIOS.

An important point: the USB flash drive must be inserted into the USB port before the Plop Boot Manager menu is loaded.

The Plop Boot Manager menu is primitive and minimalist. Navigation in the bootloader environment is carried out with the navigation keys "" "↓", and the choice of boot option is carried out with the Enter key.

Among the possible actions we will see: