Restore the SAMSUNG Galaxy Tab 2. How to reset the Samsung tablet with the easiest way

The need to restore telephones or Samsung tablets to factory settings occurs when a failure appears operating system Android. The reason for the problem is the software installed from unknown sources, a large number of games on the internal and external memory card or incorrect user actions. After that, the mobile device begins to work unstable or even ceases to turn on. And reset system, system or hardware - the best way To return efficiency.

Reset over the settings menu

First and most simple way Restore the Sumsung smartphone system to the state in which it was when buying, is a reset through the settings. This requires:

The owner of a smartphone with an activated screen lock to continue the transition to the next step will have to enter a password or PIN. After selecting the removal of all data, the mobile device will restore the factory settings and restart the system. If some information should be saved, it is transferred to an external memory card.

SAMSUNG software reset usually coincides with similar actions for smartphones. But if presence different versions The operating system recovery can be performed differently - the differences are consistent with the names of items. Instead of "archiving and reset" in the settings menu, "Privacy" or "Recovery and Reset" are selected.

Recovery through the Recovery menu

Resetting the system to factory settings on sAMSUNG smartphonesUse the following procedure:

Turn off the device;
Simultaneously press and hold the HOME, VOLUME + and POWER buttons;
Wait for the appearance of vibration, testifying to the smartphone reaction to keystrokes, and release POWER;
When the System Recovery menu appears on the screen, the rest of the buttons are released;
Using the volume keys, select Factory Reset (sometimes - WIPE DATA) and press POWER to select the appropriate item.

The final stage is the choice of the erasure command of all user data (Delete All User Data) and pressing the enable smartphone button to start it. After discharged to initial settings Smartphone reboots. Sometimes a reboot is required manually by selecting Reboot System Now.

The same version of hardware reset is applicable for Samsung tablets. But since hOME button There is no on these devices, the Hard Reset will have to press only two keys - loudness and inclusion. The remaining actions and inscriptions on the display are completely similar to the recovery process of the smartphone settings.

Reset by a set of service code

For smartphones and tablets with a 3G-module, the settings are discarded by entering a combination of characters. To do this, open the dialing panel phone numbers (Green tube on the main screen) and administer one of the three options:

* 2767 * 3855 # - the most popular and acting on most devices;

# * # * # * # * - codes that lead to a discharge not for each smartphone or Samsung tablet.

After entering a numeric combination with the help of the sensor dialer, press the call key. This will first lead to a reboot of the system, and then to the discharge process. For tablets without a 3G module, which does not have a phone application, this technique does not fit.

Appeal to the service

System and hardware techniques for resetting mobile devices SAMSUNG are suitable only for situations when they continue to work. Sometimes with help menu Recovery. It is possible to start and restore to the factory state of the tablet or smartphone system, for some reason that has ceased to turn on. But if none of the ways helped, and the device not only hangs, but also ceases to respond to the user's actions, do not do without circulation service center. Sometimes the recovery of settings do even under warranty.

Hard Reset, it is hard reset, is done in two main ways. Regardless of the selected way, take care of backing up personal information, and also get a memory card from the tablet and just in case a SIM card, if any.

1. Us \u200b\u200bthe menu (if the tablet is activated)

If the tablet is fully operational, the graphic key is not blocked, and you have the opportunity to get into the settings - be sure to use this method to make the hard reset (hard reset) and carry custom (user) settings to factory (Factory).

1. All you need to do is get into the settings, and find item Restoration and reset.

2. then you need to select item Reset.

4. As a result, the Android will give the last warning that you want to demolish everything, and you can't restore anything. If you do not change my mind, choose the command Erase.

5. The tablet will be rebooted, and to demonstrate to you all the depth of the process, you will see the screensaver, as in the robot of the Android robot, atoms and molecules are spinning.

6. This is normal, after a couple of minutes, the screensaver will disappear, the tablet will start with such factory (factory) settings and applications, as if you just brought it from the store.

2. Through the Recovery menu (if the tablet does not turn on)

If the tablet occurred software failure, he stopped running, goes "eternal load", or a device is blocked graphic key - You have only one way out - get into Recovery Mode.. Recovery mode. In the recovery menu, you can get only when the tablet is turned off. To do this, use a special combination at the same time or consistently pressed physical buttons on the tablet, which are located on the device housing. This is usually the volume swing +/-, the power button, and / or the "Home" key.The general procedure of action is:

1. Turn off the tablet. The battery must be fully charged. If you are not sure in full charge, or a weak battery, better spend all manipulations by connecting the tablet to the network

2. Climate the keyboard key (examples of such combinations for your device model will be lower), and we wait until the recovery mode opens

3. Move the menu using the volume rocker (in some tablets it is possible sensory control). Choosing a team wIPE DATA / FACTORY RESET(translation: Erase the base / reset settings to factory). To do this, press the finger if the control is the touch, or the power button, which in this case serves as a button OK.

5. After that, you must give the reboot command (Reboot). To do this, choose the item reboot System Now.(Translation: Reload the system now)

6. The tablet will think a little, all data and settings will be erased, and it will turn on.

It is worth noting that each tablet manufacturer sets its set of keys to access the Recovery menu, so only common methods are collected, relevant to different marks devices.

Attention! In descriptions of options, as you can get into the recovery, I will mention that the reset is carried out according to the standard, general procedure, or by the workpiece. It means that you will need to take advantage of the workpiece with the photo described above.

How to make a hard reset on tablets of different manufacturers:

1) Samsung

Method number 1.

Simultaneously clamp the buttons: "Home" - a central button, the "+" volume change key, and the power key.
We are waiting for a couple of seconds when the Samsung logo appears, then we expect the recovery mode until it starts.
We release the keys squeezed earlier.
Using the volume keys +/- Go to the Wipe DataFactory Reset string. To select an item, make a short press on the power key. Next, we do everything on the workpiece.

Method number 2, if there is no "Home" button, or when the keyboard key does not work

Press the two keys: decrease the volume "-", and power
As soon as you see the samsung logo, the power key can be released. At the same time, hold the volume button. When there is a lying android with an exclamation mark, you can let go button
Make hard reset (hard reset) according to the standard procedure

2) ASUS

Method number 1.

Press the power button and reduce the volume at the same time
We release the keys when the recovery menu appears
In the menu looking for a string Factory Reset., Select it using the power button. We are waiting for the completion of the operation and reboot (reboot) tablet.

Method number 2.

Simultaneously pin the power key and the volume reduction rocker
Wait until the fine text appears at the top of the screen, then release the keys
As soon as you see the inscription Wipe Data, immediately press once on the volume key (the main thing is to do it without delay). We are waiting for reboots, we use.

3) Lenovo.

Method number 1.

You must simultaneously press the power button at the same time - the volume adjustment (i.e., click on the rocker in the middle), and hold for a few seconds
Then simply let go of these buttons, and we make a single click on the rocker reduction or increase the volume
We are looking for Wipe Data / Factory Reset, select its power key, and expect until the reset process is over.

Method number 2.

Press the power key, and hold until you feel the light vibration
Immediately after that, you need to quickly press the volume to increase the volume several times (may not work from the first time)
The recovery menu appears, then we make a reset according to the standard procedure.

Method number 3.

Click the volume and power change keys at the same time
Let go only when Lenovo's logo appears
When waiting for the recovery menu download, spend standard procedure By template

4) Prestigio.

Method number 1 (works in most cases)

Clear the volume swing up and the power button
Let's let go when the logo appears android
After the recovery appear, we perform a reset according to the standard

Method number 2.

Along with the power button, simultaneously clamp the volume swing
Wait for the tablet to start, after which the power button can be released, do not let the volume swing
When a stay android appears, let go of the key, and immediately press the volume swing completely. (That is, the reduction and increase in the volume at the same time). If nothing happened, repeat the procedure again until it turns out
If you're lucky, get into the recovery menu, and then everything, as usual

5) TeXet.

Method number 1.

Swinging the volume increase "+" You need to hold the power button simultaneously
When the tablet reacts with vibration, the power rocker can be released, the volume control button continues to hold
As soon as the menu appears, the button can be released.
Further by standard

Method number 2.

Click the "Home" key simultaneously with the power button
When the Android logo appears, release the power key, press it for another couple of seconds. Then press the volume key
Next we make a reset on the template

Method number 3.

At the same time, hold the buttons: Home and Enable / Lock. "Nutrition" after a couple of seconds release, with the "Home" key continue to hold
When you see the recovery menu, the button can be released, and discharge according to the standard workpiece.

6) Sony

Method number 1.

Power keys and increasing the volume must be shrinking at the same time
As soon as the screen turns on, release the power button, at the same time climbing the entire volit adjustment key simultaneously.
After the menu appears, the button can be released, and then the standard procedure

Method number 2 (for tablets with the RESET button)

Connect the tablet through charger to the network, and wait until the green power indicator lights up, which is located near the device's power button
On the body we find a hole with the RESET button, and presses there with a thin object, for example, a clip
When the screen is turned off, clamp and keep "food" for a couple of seconds
Before the tablet starts to turn on, press the audio addition button several times.
When the recovery menu appears, reset the standard

7) Huawei.

Method number 1.

Hold the power and reduce buttons at the same time, and hold about 10 seconds until the menu appears
We make a discharge on the workpiece

Method number 2.

Hold the volume button in the middle, following this - power. Do not let go of the volume
Hold up to 10 seconds until the screen saver appears. At this time, you need to release the power key, but the volume button must remain squeezed
As soon as the image of the Android robot appears with gears, move the pin from the center of the volume swing at its increase
Discover the button only when the green boot band appears
Further, everything you need to do is observe the process. When everything turns out to be demolished and the hardreset will be produced, the tablet will restart.

8) Ainol

Hold the two buttons at the same time: the power and rudder of the volume adjustment
See a green robot on the display - can be released buttons
After that, the recovery menu should appear. If the miracle did not happen, press the power button once, or on the "home"
Further, all according to the standard.

9) on chinese tablets (including nunnyim)

Chinese production tablets are such a set that it is simply impossible to describe all the options in the recovery menu. Try to test on the tablet all the methods described above - somehow suitable in any case.

Also note that on most Chinese devices simply no Recovery Mode mode. All that can be done in this case is to find the firmware for your tablet or program for it as well as instructions for it, and. Will the tablet clean android, and he will earn again.

How to make a hard reset on the tablet without volume keys

There are devices that nature triggered the volume through the volume. General advice with such a situation:

Tyk's method to try to get into the recovery mode, clamping "power" and "home" when the tablet is turned off. For example, clamping two buttons at the same time, and wait. Or so: to hold the "Home" button. At the same time, once press (but not clamp) the power button, then release the "Home" key. When the android screensaver appears, click the "Home" button again.
Even if you manage to get into the recovery, there is a problem with the menu navigation. Decides uSB connection Keyboard via otg cable.
If it still fails to get into the recovery mode, the most top chart is to reflash the tablet.

Please note that this article is not comprehensive information on all models of tablets. Therefore, if you did not find the manufacturer of your tablet in the list, try all the above-described key combinations, perhaps some way is suitable for your device. If you did not manage to get into the recovery mode, write the model of your tablet in the comments, if possible, we will try to tell.

The Galaxy 2 tablet has a PLS screen with a 1280x800 matrix, the basis of the hardware filling is the two-core gigagert processor Cortex A9, RAM 1 gigabyte, there is a navigation module that supports the GPS system and Russian GLONASS.

The tablet works very smoothly, iron pulls all the main applications and tasks. But sometimes mobile devices Under Android OS starts to give failures. Often the problem can be solved by the usual reboot, or the so-called Soft Reset. Since the tablet does not have the ability to physically remove the battery to turn off the dependent device, then some owners may have alarm or even panic. It seems to them that the tablet came out of standing, and only a campaign to the service center will solve the problem. In fact, the tablet has a soft reset function, in which all data is saved, it is an equally deep reboot of the device. The user presses and holds the power or power button within ten seconds. During this time, the tablet will fully turn off. After that, the device can be enabled and continue to use.

Easy program errors

There are cases when failures after rebooting are not eliminated, or you just want to remove all personal data from the tablet before selling or gift. It is often that there are situations when the password is forgotten, and the device has been blocked after several attempts to enter the incorrect code. In this case will help hard Reset. Samsung Galaxy 2 Tab, which will restore all the settings of the device to the level when you just took it out of the box.

Important! If you reflash your tablet to the new OS, and you want to return the old firmware using hard reset, then it will not work. Hardware reset Settings will not solve this problem, you will have to independently make flashing on the stock version.

Reset or Hard Reset Samsung Galaxy 2 Tab

To begin with, turn off the tablet. If not sure, Soft Reset
Press and hold the sound key on the plus, simultaneously click the Enable button.
After the system and vibration logo appears on the screen, the mono buttons release
Using the volume key, moving around the recovery menu to Factory Reset
Confirm your action with the power button
Agree with the removal of data
After a few seconds of the expectation, restart the device by selecting the Reboot System item.

After rebooting the tablet, enjoy clean device settings and empty memory. On the tablet there will be only a system as if he was just from the store.

There is another way to reset the settings - using a symbol-digital code.

Run the application for calls
We enter a combination of characters: * # * # *, second option * # * # 7780 # * # *, Third * 2767 * 3855 #

If the combination does not automatically work, presses the call. After that, the tablet will restart with recovered settings.

Know the methods for resetting the Samsung Galaxy tablet for android users. Accident will occur, the Samsung Galaxy tablet may not work suddenly. It can be broken, perform very slowly or start acting. As for the case, you need to hardly reset the Samsung tab to correct these problems. But what should you do to reset the Samsung Galaxy tablet without losing any data? The article explains some decisions on how to reset the Samsung tablet without losing data. Now it's time for action. Select the correct SAMSUNG reset solution or return important files for Samsung Galaxy, respectively.

Part 1: How to restart the Samsung tablet to factory settings

Actually exist various methods SAMSUNG GALAXY Tablet Relief. When the tablet Galaxy reacts, but it seems that it does not work very quickly, or sometimes you forget your password, and the memory of your Samsung tablet is very scarce, etc., then you should use internal sAMSUNG reset pills.

Method 1: Reset SAMSUNG Galaxy Tablet from Settings

If most SAMSUNG GALAXY tablet functions still work or work slowly, you can use next method Tablet reset, as shown below.

Step 1: Restoring factory data from settings

After accessing your android phone You can go to the factory reset via the main screen\u003e "Settings"\u003e "Privacy"\u003e "Reset Factory Data".

Step 2: Enable the "Reset Phone" option

And then you need to confirm that you want to reset the Samsung Galaxy phone. Click on the "Reset Phone" button, factory setting Tablet.

Step 3: Delete everything for Samsung

Click on the "Erase All" button to confirm the cleaning samsung phone Galaxy. And then the tablet will be reset to factory settings.

If it closes, you can restart the Samsung tablet by lifting the power button in about 10 seconds. And if the solution does not work, you can try the second solution.

Method 2: SAMSUNG Reset from Android Recovery Recovery Mode

When Samsung Galaxy Tablet freezes or does not work well, you will not be able to use the menu. And then you must take the following steps to reset the tablet now.

Step 1: Enter the Android Restore mode

Switch the SAMSUNG tablet using the power key. Then press the "Power" button and "Volume" until the Samsung logo appears on the tablet. And now you are entering the Android recovery mode.

Step 2: Delete Data / Reset Settings

Go to "Erase Data / Factory Resets" options using the "Volume" or "Volume Reduction" buttons, which are used to highlight the displayed parameters on the Android Recovery screen to install hDD Samsung on factory setting.

Step 3: SAMSUNG tablet reset to factory settings

Press the Power button to install the Samsung hard drive. Then go to the next screen, click the "Reduce Volume" button several times and press "Power" for the allotted option "Yes - delete all user data".

Wait for a while, as the device deletes all the data and restores them to factory settings. Later you can simply select the "Restart System Now" option so that the tablet began to work again. At that time, you performed a samsung tablet reset.

Part 2: Restore lost data After resetting the settings to the Samsung tablet

After factory reset, if you lose important data on the Samsung tablet, you can take Tipard Android Data Recovery. For help, it will help you to restore lost data or delete data randomly. Tipard must be best way reserve copy Files before reset. Just learn more about the solution as shown below.

Load and install the program

Just download and install Tipard Android Data Recovery from the official website on Windows or Mac. And then you can run the program to return the SAMSUNG GALAXY tab data.

Connect samsung to computer

And now you can connect Samsung to a computer using a USB cable. Usually Android Data Recovery can automatically detect Samsung's plates.

Enter B. samsung mode DEBUGGING on the Samsung Galaxy tablet, Android Data Recovery will detect information about the tablet. Click "OK" in this software To recover data and click "OK" on android deviceTo resolve Samsung.

Select SAMSUNG data to restore

As soon as the program scans the Samsung Galaxy tablet, you can get important data in advance. And now you can reset the Galaxy tablet, without fear of losing important data.

Output

How to make a reboot of the tablet?

The most "narrow" way to restart the gadget, if it does not respond to the pressing of the buttons - just pull the battery, insert it again, and then turn on the device again.

On most tablets back cover So simply not removed, but if you can remove it yourself and pull out the battery - do it.
If not - try pulling the memory card, and then insert it again.

Again it did not work, and you do not know how to restart the Samsung tablet? For all devices there is one universal way Reboot - Turn the volume and power reduction button. Hold up to 30 seconds. After that, your tablet must reboot.

What if not one of the ways does not help?

If your device still does not respond to pressing - try to wait until it is completely, it will happen in any case. Then try to turn it on again. If the tablet "gives signs of life", but the logo notation will not be loaded, try to turn it off again and go into the "recovery" mode.

On the various models This is done in different ways, about the ways can be found on the unstashes of the World Wide Web. Most likely, it will be the power button (it is used to lock) and one of the volume keys. In the console appeared, select "Reboot System". In extreme cases, you can reset the tablet to the factory settings through this mode.

Finally, let's say that if after rebooting the situation is repeated - it is better not to try to "reanimate" the tablet independently, but still take it to the competent master.