FASBOOT (Fastbut) - this is special regimewhich allows you to spend on a low level with the device under android management Various actions - reflash, unlock the loader, install custom Recovery, etc. But if something went wrong in the process of service operations, the phone may hang in this mode without the possibility of normal loading.
How to determine what phone is in FastBoot mode
FastBoot mode Inexperienced user can easily confover with a different mode of operation - recovery, or in general with other problems when the phone is not loaded for any reason. A simple and reliable way to determine that the device is located in Fasboot Mode - pay attention to the inscription, which is displayed on the screen. If you see a message "fastBoot Mode Start UDC_START () ", The smartphone is in the fastbut mode.
Conclusion from FastBoot for Xiaomi
After you were convinced that your phone moved to fastbut mode, and you want to remove it from this mode, you need to do the following:
For a long time to hold (about 20 seconds) the power button. The smartphone should go to the reboot and turns on in normal mode.
Sometimes software failures that are not eliminated by reboot are simple or via recovery. In this case will help reset to factory settings. It is performed as follows:
- Press and hold the power button and the volume button down at the same time.
- The phone will restart and enter Recovery mode.
- In the menu that appears with scrolling the list down to Wipe Data / Factory Reset and confirm the selection.
- The device will delete all user data, reset the settings before the default values \u200b\u200band will reboot. This operation takes time and together with a reboot can take up to 15-20 minutes.
note that full reset Delete all user files - saved pictures, photos, music, video, and independently software installed. The list of contacts, messages, etc. will also be reset. Because use this option only as extreme measure or if you have full backup All you need.
In our firmware and unlocking instructions, FastBoot Mode is often mentioned (translated into Russian "quick loading mode"). What is FastBoot, where to download and how to use, we will tell in this material.
What is FastBoot Mode
This is laid in the Android device software, which allows you to control via PC. Used to manage text teamswhat is introduced into the console - command line.
It is important to note that FastBoot is three things with one name, but different purposes:
- Protocolin the form of a loader control system from a computer.
- SoftwareWhat works on the device in FastBoot mode.
- Executable file. On a computer, which is used to interact a mobile device with a computer.
Usually, when in the instructions you see Action: "Download your smartphone in FastBoot", "will reboot to fastboot" or "Go to FastBoot", it means run this mode on a mobile device for further interaction with the computer.
Almost all smartphones and tablets, support FastBoot control protocol. Exception is some manufacturers of mobile platforms, for example, where another loader is used incompatible with FastBoot. Therefore, to control and firmware devices where FastBoot is not supported, other "tools" are used.
How to exit FastBoot Mode
Three ways to exit FastBoot Mode are available:
- Enter the FastBoot Reboot command.
- Hold the power button for 15-20 seconds.
- Remove battery.
If the device is in FastBoot mode, and you have completed work and want to download the operating system, then enter the FastBoot Reboot command. The device will reboot and the default system will load. The method will not work if the cable is damaged. For example, there was a rupture of the wire responsible for the exchange of data.
Exit FastBoot Mode also helps the long-lasting deduction of the power button, usually up to 20 seconds. The method is effective if the command for rebooting the device has not worked. It is not suitable if the button is damaged.
Barbaric but in some cases effective method - Remove the battery, if such an opportunity is provided for design. After returning the battery back, the phone will load the OS by pressing the power button.
Purpose and Features FastBoot
The FastBoot protocol is designed to restore the device, in case of deleting or incorrect firmware, one or all sections, including recovery. Therefore, FastBoot will be useful when other methods are in no effect.
List of some operations performed through FastBoot:
- Transfer to FastBoot mode.
- Checking condition and factory.
- , kernel, or other partition.
- Delete or format a specific partition.
Output
What is FastBoot Mode (quick download mode) and how to exit FastBoot Mode, described in detail in the article. FastBoot Protocol Important Mechanism for Working with Device and Recovery System, after unsuccessful firmwareSince FastBoot is not going anywhere, even if all sections are removed. In this case, any process recovery process is easier if the bootloader is unlocked.
The article was useful for you?
Put the rating - support the project!
Despite all the utility and multifunctionality of the FastBoot Mode mode, its spontaneous inclusion on the mease may indicate serious violations in the mobile device. Fastbut is an indispensable tool for Android developers and debuggers. Private users face extremely rarely. Let's figure out what FastBoot Mode is on Meizu and how to exit this area if the phone is hung and does not respond to external commands.
Purpose and reasons for download FastBoot Mode on Meza
FastBoot is softwarewhich is designed to restore and remotely configure smartphones operating on Android OS. It is included in the package of components for developers. Android SDK. and allows you to fully control the mobile device through the computer.
The main functions of FastBoot Mode Meizu M5, Meizu M2 Note or any other device are:
- installation on android licensed and custom firmware through PCs;
- unlock root access;
- creation and installation of system backups;
- setting the gadget parameters that are not available for the user in the normal mode;
- restoring the performance of Meizu M5 Note after its transformation into "".
Fastbut on a mobile phone is not part of the operating system and is loaded earlier for Android. This area is spelled out at the hardware level and is in the memory chip. This allows you to work with it even when the operating system.
Activation of FastBoot Mode on the Meizu phone can occur for the following reasons:
Turning off the fastbut through the standard MEZ settings
Turn off the MEIZU M5 FastBoot Mode in three ways:
- . It is used in the case when the operating system responds to the mechanical keys and the user can go to the Device menu.
- Through a computer and command line. Allows you to restore the normal performance of the gadget if the debugging on USB is activated.
- . This method is used as an extreme measure, because it leads to removal from the smartphone of all data and settings.
To exit FastBoot on Meizu M3 Note or Meizu M5 Note First, try to do the following:
So for the next turn on Meizu. FastBoot no longer appeared, open the device settings and in the section " Special abilities»Deactivate the" Fast Turning "function. 
Turning off FastBoot through computer
If, after the operations proceeded, the phone did not leave the fastbut, but it includes debugging via USB (for example, before this you installed a custom firmware), you can achieve the desired via PC:
After restarting the phone should turn on in normal mode. To exclude the re-opening of the fastbut, it is better to deactivate fast loading in its settings.
We decided to flash your Android using the FastBoot utility, but here's not the task you do not know how to translate the device into a special mode? Our site represents the most complete article on the translation of Android to mode Bootloader / FastBoot!
Translate to FastBoot Asus mode
1. Turn off the device;
Volume up "+" On / off »
3. Hold the two buttons until the message appears until: " CSC MODE. LONG PRESS POWER TO RESTART SYSTEM «
ASUS - how to enter FastBoot mode (video)
(Rutube) 0A26347A5F3E2E9A9599BF0E9A05B817 (/ Rutube)
Translate to FastBoot Pixel mode, Nexus, HTC
1. Turn off the device;
2. Click and hold the " Volume down "+" On / off »
Nexus - how to enter FastBoot mode (video)
(Rutube) 352A29D74D3F458901B438B9273C2051 (/ Rutube)
HTC - how to enter the FastBoot mode (video)
(Rutube) 05E15B10AE27290F76AC7F27CB0CD3CE (/ RUTUBE)
Translate to FastBoot Sony mode
1. Disable from the computer and turn off the device;
2. Click and hold the " Volume up "+ connect via usb
Sony - how to enter the FastBoot mode (video)
(Rutube) F02CDAD7C7FFDC1713DD6D80CBAC20CF (/ RUTUBE)
Translate to FastBoot Motorola mode
Option 1
1. Turn off the device;
2. Click and hold the " Volume down »+» Volume Up »+" On / Off »
3. Hold the three buttons until the required menu appears.
Option 2.
1. Turn off the device;
2. Click and hold the " Volume down "+" On / off »
3. Hold the two buttons until the required menu appears.
Motorola - how to enter the FastBoot mode (video)
(Rutube) DD7016EF14409479EEFF1A906B83843E (/ Rutube)
Translate to FastBoot Xiaomi mode
1. Turn off the device;
2. Click and hold the " Volume down "+" On / off »
3. Hold the two buttons until the required menu appears.
Xiaomi - how to enter the FastBoot mode (video)
To be able to exercise a fine setting of OS and iron parameters, users of mobile devices running Android sometimes rut \u200b\u200btheir gadgets, and also make changes to. But these are not all available ways to obtain extended access to the settings of the device and the system. You can look under the "hood" of the device by using the mode called FastBoot Mode.
What is FastBoot Mode
What does FastBoot Mode mean (fast download) and what does it have to do with fine tuning? In some laptop models, it really serves to maximize the boot of the system bypassing the BIOS and debugging applications, mobile devices Its purpose is somewhat different. On smartphones I. android tablets This mode is required primarily to provide access to system components of the device and control them using a computer.
Using FastBoot Mode features, service centers and experienced users May be installed software, produce flashing gadgets, restore applications, perform backup and recovery, change hidden system settings. The developers using it are often resorted to "fast download" using it for testing software and other purposes.
Clarifying the purpose of the regime, we seem to have not answered the question of what FastBoot Mode is in essence. So, fastbut in android is a separate, independent software component, implemented on the hardware level and prescribed in the memory chip. It is this independence that allows you to load the device even if serious problems occur operating system. The FastBoot Mode software code is located in the memory area protected from reading and writing, which eliminates its damage.
In which cases are activated by FastBoot Mode
The fastbut medium can be running manually via the standard menu or by simultaneously clamping the power button turned off and the volume keys / increase the volume. But in some cases the mode is launched independently, and this is not a good moment. The causes of spontaneous loading can be unsuccessful flashing, replacing the standard recovery environment modified, obtaining superuser rights, system failure and damage to Android files.
How to exit FastBoot Mode
The image on the mode shows the image of a opened robot and the inscription on the FastBoot Mode phone screen.
If before that you did not make any changes to the gadget configuration, perhaps the reason for the transition to "fast loading" was some kind of temporary failure. Try to restart the smartphone. If after restarting the phone writes FastBoot and does not switch to normal operation mode, it may indicate deeper malfunctions. It is possible that the problem will be so serious that the gadget will have to reflash in the service center, and so far it did not reach it, you should try to get out of the fastbut yourself.
There are two main ways to do this: through the phone itself and using a computer. If the usual reboot does not help, turn off the device, and then simultaneously clamp the inclusion keys and lowering the volume by holding them until the same time (about 10 seconds), while the SELECT BOOT MODE menu appears or the phone will not load in normal mode. In this menu, select the Normal Boot option and wait for the gadget for normal mode.
In some cases, the battery removing the battery is helped from the debugging mode if it is, of course, removable.
Sometimes users have to face loading in fastbut mode after they took the gadget from service Center. So usually happens after. Probable cause - left-end-mode function in settings. If this is the very case, then to disable FasBoot Mode, go to the settings, and then in the "Screen" or "Special Features" section, find the item " Fast download"And remove the checkbox from it.
How to exit FastBoot Mode using a computer? Install on the application PC, connect the phone to the computer, activate the USB debugging, run on behalf of the administrator command line and execute the command fastBoot Reboot. This is a simple, but very effective way to disconnect fastboot.
If he does not solve the problem, reset the device to the factory parameters. Copying all the important data, remove the sim card from the phone and the memory card, boot in Recovery mode, find the option in the menu wIPE DATA / FACHRY RECEET And make a rollback with it.
Additionally, you can clear the contents of the repository by selecting the option wipe Cache PATITION.
How to translate the phone to FastBoot Mode mode
FastBoot Mode - Service Mode, resort to which it is most often necessary to change the configuration of the device through a PC, for example, install a modified firmware or get root rights without use third-party programs. Loading in Fastmoda may also be needed to provide full access to system folders Android and OS recovery (as an alternative to Recovery mode tools).
Method of logging into FastBoot Mode mode on different devices may differ. IN smartphones asus To do this, you need to keep the inclusion buttons and increase the volume, in the Nexus and HTC - the on and down volume buttons, in Sony, the fastbut mode will load if the volume increases the volume and connect the gadget to the USB PC.
But there is I. universal way downloads to fastbut, equally working on all mobile android devices. Download and install the program on the computer AdB Run.. Next, turn on the USB debug in the phone settings, connect the device to the PC and running the ADB RUN, select in the menu Reboot - Reboot Bootloader.
The gadget will reboot in FastBoot mode.
