TeamViewer serves for remote connection To the computer and is widely used throughout the world for help, administering and solving problems. Most often, users run the program manually to obtain assistance and turn it off after solving the problem. About it . But in this article we will analyze how to configure uncontrolled remote access to the computer using TeamViewer.

Why it is necessary

Permanent access will be needed if you need to systematically connect to a computer, but it's no one to run the timer to manually. Or if you just do not want to distract a person and wait every time the program startup on that side.

Advantages of uncontrolled access in TeamViewer

1. TeamViewer is always running. The service is installed on the computer and manually run the program is not required.

2. A constant password is used to connect to connectivity, which you choose (and not dynamic, as in the case of manually running program).

Step-by-step instructions for configuring unattended-access

Download the program from the official website TeamViewer.com.

Run the downloaded file.

Set the switches to the position:

• Install to manage this computer to be removed;
• personal / non-commercial use

and press Accept - complete:

The Uncontrolled Access Setup Wizard will be launched. In the first window, click Further:

Select an arbitrary name for a computer, enter the password and confirmation. Click Further:

If you want, you can create a TeamViewer account. This will allow you to add computers to the contact list. But it is not necessary to do this and you can choose I do not want to create an account ... and press Further:

Copy the computer ID and click Ready:

Now you can connect to a computer using and its ID and the password you specified:

The computer name for connecting is not needed!

Now you can always connect to a computer using its ID and your permanent password. It is only necessary that the computer is turned on and connected to the Internet.

TeamViewer Online is an ability to administer a remote computer from your browser. You do not need to install the user, just just enter the site and enter your account. This feature works with the presence of installed program Team Viewer on the PC to which the user will connect.

With the Online version of Timwiever, users can manage all computers without installing the application itself on the device, which is very convenient for tablets and mobile devices. Online TeamViewer option is the most mobile way Device management.

Connecting Timwiemer Online

To connect to another device using TeamViewer online, you must perform the following simple operations:

• Go to the site https://login.teamviewer.com/logon
• Press "Login through a web browser."
• Communicate.
• Confirm registration in a letter on email.
• Go to the "My Computers" site section.
• Click "Add" - "Add Computer".
• Enter a PC ID and Password.
• Connect to Timvuver Online.
• Return to the main menu "My computers".
• Click Connect and select "Use the Web Client".
• With the subsequent use of the online version of Timwiemer, you will need only to enter your login and password to access TeamViewer Management Console.

Features Timwiere Online

Timvuver online has a simple and understandable interfacewith which it is most comfortable to work novice users. you can use this feature With your favorite browser from almost any place.

For a more advanced feature list, there is a TeamViewer Web Connector service, which also provides the ability to remote control using a browser. Moreover, this service also provides more convenient workBy providing a list of your contacts, as well as other tools. The possibility of using TeamViewer Web Connector is available for customers who have acquired a license from the premium level.

Despite the fact that Timwiere online provides basic functions necessary for PC management remotely, the developers strongly recommend using a full-fledged timer for remote control. This option Provides the most stable connection, as well as significantly more opportunities. You can download the latest version of Timvuiver on our website.

Maybe the ordinary user really is very much. The first (and the most common!) - You need to get full access to side computerwhich is from you at a decent distance. The second (also often!) - establish a connection with a remote PC to exchange information (reception / file transfer). Also, the timer allows you to create / configure virtual private VPN networks (two-level networks consisting of "internal" protected compounds and "external" on which communication is carried out). Well, in addition to everything, this program Allows video call and create web conferences and demonstrations between the machines connected to the network.

Installing TeamViewer.

To start using the TeamViewer utility, to begin with, it is necessary to download it, and then run or install on your PC (the application involves two types of use - with installation and without it). On our portal you can always download TeamViewer for free latest version. The pirated version of the utility utility does not make any sense, since the program is absolutely free / free for private / non-commercial use. In addition, in the Pirates Edition version, various "hacks" can be integrated with hackers, which form security holes when connected / connections.

When installing the utility, you need to pay attention to a couple of moments. The first, the installer will offer you three options for using Timvuver: 1. "Just run" (does not require administrator rights and install / install an application on a PC, suitable for urgent one-time use of the program), 2. "Install to remotely manage this computer" (Provides round-the-clock access to your machine from any third-party computer / mobile device), 3. "Install" (full installation of the PC program with all the functionality for further post-use, i.e. when required). Choose which option to suit you more.

Second, B. additional settings You will need to specify whether you will need a function of creating a VPN connection (option "Use TeamViewer VPN).

After installing Timvuver on the PC, the application will offer you register (Create account) with the system. It will give you some extra functionality: Creation / Contact Management, Contact Groups and Remote PCs (for endless communications with people and quick access to a remote PC). Take advantage of this offer.

Work with "Computers and Contacts" in TeamViewer

In the main program window, find (in the lower right corner) option Computers and Contacts And click on the arrow icon (right) to open the menu. In it (at the bottom) Select any of the options you need "Add remote computer" , "add contact" or "Add a group", Then fill in user data in the form that opens, and the new contact / remote PC will appear on your list.

Allow TeamViewer Connection to your own PC

To someone from third-party users able to connect to your computer and make any actions on it, you need to transfer it to your user data (your ID and password) you need to create the connection you find in the section "Allow Management"By running the TeamViewer application on your computer. Skype, e-mail, ICQ or, finally, telephone. A third-party user will have to create a connection through a tymvuer at home. Wait until the screen lights up in black. This means that the connection is established and the session begun!

How to create a connection to a third-party PC in TeamViewer

There are two ways. First: Ask for the user "on the other end of the wire" to provide you with your timvoney ID and password, Run TeamViewer (if you have not yet done), in section "Manage Computer" Enter this data to the desired fields and be sure to select the connection option. "Remote control"/"File Transfer"After that, click "Connect to the partner" (In the future, the inscription will burn "Interrupt the connection"). Wait for the black screen and boldly move the mouse!

Second way: Enter the menu Computers and Contacts, Find the user you need, click on his contact right. claw. Mice and just select the desired action (see Screenshot below).

Transfer files through TeamViewer

The exchange of information between the machines connected to each other, in the timvoyer is made quite simple, almost also elementary, as in the old good Total Commander.. Look carefully on the screenshot from below, and you can hardly have any questions!

That's all. All TeamWiever users are successful, high-speed and safe connections!

All famous program To install remote control computer TeamViewer. Recently, it became increasingly and more often to issue a connection error. Unfortunately, there are quite a few reasons for this, and offer universal way The problem solving is not so simple. But in this article we will try to help you troubleshoot when TeamViewer does not connect to another user, gives a network error.

Work in TeamViewer.

How to fix the problem, will be told just below, now it is worth telling how to connect to a computer through TeamViewer, because perhaps you do this not quite right, because of what problems arise.

So, for a start, we start the program itself, following you, you must open the window in which your ID and password in the "Allow Management" column are specified, if not, then, most likely you are not on that tab. At the top of the program, click on the "Remote Control" tab.

Next, to connect to another computer, you need to pay attention to the "Manage Computer" group. In it, you should enter the computer ID to which you will connect, select the connection type (remote or file transfer) and click the "Connect to Partner" button. After that, the window will appear in which you must enter the password, you should tell you another PC.

After all the actions made, the connection must be established, and you will see the OS desktop to which you have connected. If, by following this instruction, you have not achieved the desired result, then try to find a solution below in the text.

The first reason: the version of the program is outdated

The reason for the TEAMViewer does not connect to the remote PC, may be outdated version software. As you can easily guess to eliminate the problem, you must only delete the outdated version of the program, download a new one and install it.

Having done all these manipulations, try again - everything should work properly.

Second Reason: Firewall

W. windows users TeamViewer does not connect to another PC because of problems with the firewall. This system utility is able to block the program access to the Internet. To resolve this reason, follow these steps:

Enter the firewall. To do this, open the "Start" menu and in it click on the "Control Panel" button. In the Panel, select Show "Large icons" and in the list, select "Windows Firewall".

On the left sidebar, find the string "Resolution of interaction with the application or component in windows Firewall"And press the left mouse button on it.

In the window that appears, you need to find the names of the programs and put the checkboxes in the "Public" column. More accurate this process is displayed in the image below.

After all the manipulations done, click "OK" to apply all changes, and try to connect to the remote PC again. The problem when TeamViewer does not connect, should abyss.

The third reason: problems in the Internet connection

Knowing how to connect with TeamViewer to another computer, it still does not always manage to do due to network problems. The reasons why the Internet you do not work properly, maybe a lot. The culprit can act as a provider, and maybe everything is impossible to say everything because of the mechanical breakdown. Now we will tell you how to check the Internet connection on your computer to make sure it is a malfunction or not:

On the right side of the taskbar, click on the Internet connection indicator.

In the low window that appears, it will be written if there is an internet connection or not.

Here is such simple instruction in two stages. If instead of "connected" something else is written, then feel free to call the provider so that it suggests you solving the problem solving.

Fourth Cause: Technical Work

Continuing to understand how to connect via TeamViewer to another PC if an error appears, we cannot ignore the availability of possible technical works of the program servers. To make sure that you need to go to the developers website - usually when planned work is held, the site hangs about it. If this is true, then you can only wait - by the way, the site may be written the time of approximate endings.

Five Cause: Program breakdown

Passing all four possible reasons Faults in the program connecting, finally, you can only assume that the program itself is the program itself. It is not known for sure why this happens and what is connected with this, however, "treatment" is known for such a problem. By the way, it is similar to the first reason: you need to fully uninstall the program, then download it again, must from the developer's official site, and install back to your computer. After completing all these actions, try to contact the other user again, this time everything should be successful.

Conclusion

So we disassemble the five most popular reasons for which the program issues an error when connecting to another user. I want to believe that some of them will help you, however, to great regret, there is a possibility that the reasons for more than it was given in the article.

TeamViewer is one of the most popular utilities for remote access to a computer. With the help of the program you can manage a stranger PC, restart the device, communicate in voice or text chat, arrange a conference and much more. However, applications are often faced with various failures, a fairly common problem is the lack of connection in the program.

When you start or working with the use of users, you can see the message "TeamViewer is not ready to check the connection". Most often, a similar error appears after the end of the allocated traffic. U users free version Utilities have a limit. The program, having exhausted the allocated time, stops working. But there are other reasons:

• Poor connection with the Internet or its absence.

• Blocking application by firewall or antivirus.
• Using an outdated version.

• Incorrect work TeamViewer or system failure.
• Carrying out technical activities on the server.
• Incorrect launch.

The user who found it does not connect to the partner or stopped working, need to perform a few simple actions.

Restart and unlock

Often, problems with the connection arise because of the work of the firewall or antivirus. Most of the PC protection applications are not only followed by files, but also for Internet connections. To eliminate the malfunction with the connection you need to add a utility to exceptions. It is done in the settings of the antivirus.

Also web control is carried out and the built-in firewall program, which can stop the work of the Timwiver and disable the connection. Solve the problem will help turn off protection, for this you need:

• In search Windows Find firewall.

• Run the found utility.

• Go to the "Resolution of Interaction" section.
• In the window that opens, near the name of the application, set the checkboxes to the points "Private" and "Public".

You should know: to run the utility for remote access follows from the name of the administrator. To do this, click on the icon of the right mouse button and select the desired option.

Problems with the program

The cause of the problem may become incorrect operation of the application or no update. Users are often interested if the message appears: TeamViewer is not ready to check the connection, what to do next?

Solve a problem with an update or a failure will help delete and reinstall the thimwiver. The user should completely erase the program, go to the official website and download the latest version.

It is important to remember: Before deleting, check the Internet availability. Perhaps the cause of the problem was the lack of compound.