Microphone - Important Component modern computer. Without a microphone, you will not work fully communicate on the Internet and play multiplayer computer games.

Faced with the need to use the microphone, many users wonder how to check whether the microphone works on the computer or not. If you are also interested in this question, then our article should help you.

Method No. 1. Microphone settings.

The easiest way to check whether the microphone works it. In order to access the settings, right-click on the speaker icon in the lower right corner of the screen and in the window that appears, select "Recording Devices".

You can also open the microphone settings through the control panel. To do this, go to the "Equipment and Sound - Sound" section, and then open the "Record" tab.

As a result of the actions described above, the "Sound" window should appear in front of the "Record" tab. In this window, you can easily check whether the microphone works or not. For this, just tell me something into the microphone. If the microphone works, green stripes will appear to the right of the microphone icon, signaling about the signal from the microphone. If, the strips will remain gray.

If green stripes do not appear, then it does not mean that your microphone is not working. Perhaps the signal from the microphone is, but it is very weak. In order to enhance the microphone, select it in the list of devices and click on the "Properties" button (as in the screenshot at the bottom).

After that, a window should be opened with the properties of the microphone. Here you need to go to the "Levels" tab and the microphone enhancement. First, try to set the microphone volume to the maximum, and the gain is 20 dB. In most cases, this is enough for normal operation of the microphone.

After making settings in the "Levels" window, click on the "OK" button and check again if your microphone works.

Method No. 2. A program for recording sound.

You can also check whether the microphone works using any program to record sound. In operating rooms windows systems XP and Windows 7 This can use the standard "sound recording" program. In order to open this program, you need to open the "Start" menu, then "all programs", and then "standard". IN this section And there will be a program "sound recording".

Use this program very simple. All you need to do is click on the "Start Record" button, and after the sound entry is complete, click on the "Stop Record" button and select the folder to which you want to save the file. As a result, you will receive a file, with a sound recorded from the microphone. After listening to this file, you can evaluate how the microphone works.

If you have Windows 8 or Windows 10, then you will not be able to use the "sound recording" program. Since it is removed from these operating systems. Instead, you can download anyone anyone free program To record sound.

Method number 3. Skype.

The microphone is an important part of any modern Gadget. Especially in demand, it becomes if you need to communicate via Skype or when recording audio. Well, if it is already built into the device, but sometimes it is much more convenient to acquire this auxiliary item separately, for example, complete with headphones. This will allow you to hear the interlocutor, talk to him and at the same time creating a minimum of inconvenience for others. In order to understand how the kit works and check the correctness of its work, it is enough to connect the headphones with the microphone to the connector located on the computer.

There are the following basic methods of checking:

• with help operating system Windows;
• recording sound;
• by Skype.

Through Windows, you can easily and simply check whether the microphone and headphones work. To do this, you need to enable the headset, select "Control Panel" and click on the item "Equipment and Sound". A window will open, where the tab called "Record", it is she who needs us, here are the means allowing you to record audio. Click on the "Microphone" and click on "listen". Do not forget to put a mark on the line "Listen to this device».

Please note that headphones are usually equipped with the possibility of turning off the microphone. It is convenient when you talk to Skype and simultaneously communicate with another interlocutor - you can turn off the headset for a while, and then turn it on again.

If the headphones for some reason do not work as speakers, then you need to pay attention on sensitivity scale All in the same tab "Record". In the case of the device's correct operation, green stripes will appear on the scale, if it does not function, the strips will be gray. Naturally, in this way, you can confirm or disprove the work of the subject, but it is impossible to configure it correctly.

Recording sound

Sound recording will also help check the microphone on headphones. In order to accomplish this, you need to go to "Start", choose " Standard programs", Item" Record Sound "and in the window that opens click on" Start Record ". After that, we make an entry and save the resulting file in any convenient location. Opening the file, you can listen to the sound and its quality both through headphones and through the columns.

Through Skype

Another very convenient way to check the headset is to do it through Skype, no matter how you use this application in reality or not. You can make an express version of the check, but you can spend a little more time. In the first case, it is enough to choose any contact from your address book and click on the connection data point. In the window that opens, you need to select your microphone version and click the "Check" button, after a few moments of the recording, the resulting audio will be reproduced.

In addition to the above option, you can dial through a special call recording quality check service. To do this, select "ECHO / SOUND TEST SERVICE" and make a call. The record lasts 8-10 seconds and after a while is played. Naturally, in order to take advantage of this option, Internet access is necessary.

You can also adjust the volume in Skype. This is done through regulators that with automatic settings The default is translated into manual mode (Remove the checkbox from the "Automatic adjustment" point), after which all the necessary parameters can be set. It is better to do it right during a conversation with someone from your friends.

These simple ways Will help you check the work of your work kit for headphones and microphone in order to understand whether it is suitable for further operation or not. As you can see, the check does not take much time, and you can easily cope with it yourself.

Microphone One of the most necessary devices for the computer. With it, you can write the sound and communicate on the Internet by voice, which significantly expands the capabilities of the system.

However, with a microphone setting, many users have problems. Sometimes the sound from the microphone is too quiet or contains a lot of interference. If you also encountered similar difficulties, then this material should help you. Here you will learn how to configure the microphone on Windows 7.

The second microphone settings tab on Windows 7 is called "Listen". Here the "Listen from this device" function is available here. If you enable this feature, the sound from the microphone will be automatically transmitted to your speakers. In addition, here you can configure how to work this feature When working a laptop from the battery.

The following microphone settings tab called "Levels". Two most available here important settings Microphone, this is the gain of the microphone. If you first set up your microphone, you can simply set the volume by 100, and the gain by +10 or +20 dB. In the future, these parameters can be reduced if the microphone will work too loud.

The following tab is called "Improvements". Depending on whether the number of settings available here may vary. For example, in some cases here you can only disable all improvements.

And in some cases, on the "Improvement" tab, microphone settings are available that relate to the suppression of noise and echo.

The last tab of the microphone settings on Windows 7 is called "Optional". Here you can change the bit settings and sampling frequency, as well as here you can change the settings of the microphone monopoly mode. If you do not know which discretion settings and sampling frequency you need, then simply click on the default button.

After you have passed through all the tabs of the Microphone Properties window, we can assume that the microphone setting in Windows 7 is completed. Close everything open windows By pressing the "OK" button to save the changes.

Microphone Setup Using Sound Card Driver

Among the above described, there is another way to set up a microphone on Windows 7. This is a setting through sound card. Settings that are available through the driver are completely duplicated. system settings Window 7.

To access the sound card driver settings, you need to open the control panel and go to the "Equipment and Sound" section. Here you can find the control panel of your sound card.

Also, the sound card control panel is usually available from the "taskbar" (the right bottom corner of the screen).

After opening the sound card control panel, you need to go to the Microphone section. The main microphone settings will be available here: microphone volume, microphone amplification, sampling frequency and discharge.

When you change the microphone settings through the sound card control panel, the microphone system settings in Windows 7 are automatically changing.

When you find that the microphone or headphones do not work, it causes irritation and you have a person with whom communicate. Before starting checking the microphone on headphones in Windows, make sure that they work correctly. Some internet voice programs And video chats, such as Skype, also have the ability to test your audio devices before calling. If there is no sound in the headphones, or your microphone does not define your voice, following some basic troubleshooting procedures, you can quickly determine and fix the problem.

Testing audio devices in Windows

1. Connect the devices to the corresponding jacks on your computer. They are usually indicated by the corresponding icons. On a laptop or in a set of loudspeakers, the headphone jack will be marked by the icon. Some connectors have a color labeling: green - usually for headphones and a socket for linear output, and pink - for a microphone.
2. Run the media player. You can select it from the list of programs in the Start menu. Choose sound file.You want to play from the media player library. You can also double-click the audio file in windows ExplorerTo launch the default media player and automatically play the track. You must hear the sound.
3. If the microphone has the power button turn it on. Open the Start menu, and then go to the Control Panel | Equipment and sound | Sound". Select the "Record" tab, select the microphone from the device list and click "Properties".
4. Click the "Listen" tab and select the "Listen to this device" checkbox. Click "OK", and then place your microphone so that you can speak comfortable. Try to talk. You must hear your own voice passing through headphones. Open the "Listen" menu again, uncheck the "Listen to this device" checkbox and click OK.

Test in voice chat

1. Run the service voice chatwhich allows you to perform test calls, such as Skype. Log in with your username and password, if applicable.
2. Open the menu for sound levels. The menu will differ slightly depending on which service you use, but usually called something like sound settings and can be found in the "Tools" section. Make sure the headphones and the microphone are included. Save the settings.
3. Activate the test call or similar function. Usually you do this by choosing a fictitious contact with the Test Call label or something similar from your contact list. Then initiate a call. When you speak a microphone, you can hear your voice.

Usually users are looking for an online microphone check service once - immediately after purchase, to check its work.

If you communicate a lot through a voice vote, or if the sound equipment of the computer often fails, checks can be regular.

We picked up several services of different functionality that can help.

Often, in addition to checking sound, they provide useful related Internet telephony Services - Record and Conversion sound track, voice recognition, etc.

You do not need to download programs, you can do all check online.

MICTEST

Browser Flash application that analyzes the incoming signal and gives the relevant report.

The easiest site without additional features; Shows only the performance of the microphone.

Speech Pad

In addition to the microphone check itself, the service recognizes and decrypts the word speakers.

Click on the "Enable Record" button and tell me a few words or phrases. In case of proper operation of the microphone, the program will transfer all of the above text.

Webcammic Test

One of the most popular Services Microphone checks in RuNet.

If the microphone works, in the new window you will see moving diagrams of the recorded sounds.

Voice Recorder Online.

Online voice recorder. The service determines and deletes the quiet sections of the sound track and removes them, reduces the echo and allows you to adjust the volume and trim the record.

There is a time limit - 7 minutes.

Contains friendly references to the audio and vioconverter converter, and Audio Cutter Pr. - site with advanced work opportunities

Online Microphone.

Simple microphone check site. Features - timer, adjustment of the recording volume and the ability to immediately play and download recorded in MP3 format.

Sound Recorder.

Simple online audio recording service with minor editing and saving the recorded file.

Vocal Remover.

Another site where you can check the operation of the microphone. Service feature - deleting vocals from music files.

In addition to the ability to cut vocals from the record, there is a function of changing the tonality, tempo and confientization of files.

What else can you check?

• First of all - check the volume;
• In the application you use in this momentCheck that the microphone is selected as an active device - in laptops there is usually a built-in microphone (often weak and quiet). If it is selected as the main device, it may be the cause poor sound - Even with a connected external headset;
• If you use a connected microphone, check whether it is connected, and how tightly the plug is stuck in the nest;
• If possible, check whether another microphone headset will work on your device.

If the microphone does not work, try reinstalling the drivers sound devices On your computer. Instructions can be found in the following materials.