Error 56 iphone 6 what to do. IPhone errors, malfunctions and solutions

Hello everyone, so I decided to sort out error 56 when restoring iphone 6. In this article we will look for the cause of error 56 and try to give useful tips by his decision.

  • Temporary software failure on your device or iTunes.
  • Check the Internet connection and your computer.
  • Make sure the USB cable is original and not damaged.
  • Sometimes, you may encounter an error 56 issue on your iPhone, iPad, or iPod touch during iOS updates due to software conflict. Therefore, you can close all unnecessary programs such as antivirus, games.
  • You can connect your iPhone, iPad, or iPod touch to a different USB port on your PC to make sure the USB port is working well.
  • Disconnect all others USB devices other than the keyboard, mouse and your iPhone (iPad or iPod touch).
  • Restart your computer, and then try restoring your iPhone (iPad or iPod touch) from an iTunes backup.

System Recovery or Reboot program to clear error 56

You can use the program System Recovery to fix errors 1/3/6/27/56 (iPhone stuck at Apple logo; iPhone stuck in recovery mode; iPhone blue / red / black / white screen of death, etc.) DownloadSystem Recovery

Procedure:

1. Launch the software on your computer and connect your iPhone to your PC with a USB cable. Then go to the "More tools"> "iOS System Recovery" option.

2. Then your iPhone is automatically recognized by the software, then click the "Start" button to continue.

3. And the search and elimination of errors on the iPhone begins

Hardware component of iphone error 56

In most cases, this problem in repair services is corrected by means of replacing NFC. Which is an abbreviation for Near Field Communication and translates as "near field communication". The reason for the failure of this part may be moisture that got inside the phone.

NFC provides wireless communication short-range action. Used in most mobile devices. This controller is soldered directly to the motherboard and it is rather difficult to replace such a microcircuit. It is important here to contact a highly qualified specialist in iPhone repair... Replacing this chip in most cases allows you to eliminate the error 56 on the iPhone 6.

Replacing the NFC module U5302_rf and U5301_rf

We remove the board, turn it over, fix it, the culprits are marked in yellow circles in the photo

We shoot first ultimate NFC amplifierU5302_rf. We see a "gray" patch.We roll the balls, put them in place.

Trying to flash it, we don't get error 56 again, we change both mikruhi to donor ones, the result is the same, we remove it again, we begin to gently wiggle the patches, and then everything starts to fall off. Vthis is 4 spots, we restore, we put mikruhu, we sew and again we get error 56, at this moment the brain starts to boil, because according to the scheme, everything has already been checked up and down.

Cut off a piece of the screen and restore the track directly to the conder (the place where it was is marked in red in the photo).We try to flash and success awaits us

  • If moisture gets in, then first remove U5302_rf and U5301_rfand then maybe replace.
  • B1 penny break, STOCKHOLM_CTS_L, the track goes under Oscar, and then to the processor. With a fairly strong heating (almost melting of the solder), the contact was resumed until the board cooled slightly. I suspect that the culprit is not NFC, but the processor fell off (as in my case).
  • Yes, everything is simple, with such an error of 99% the processor fell off, when you replace the U5302, you simply warm up the processor and the device can flash without error, and many shout that the replacement of the U5302 helped, but warming up near the processor helped (purely my opinion and observations).
  • Yesterday I was struggling with error 56. I removed U5302_rf, the nickels were in place, the error remained. He took off U5301_rf, 4 dimes in the cliff. I try to sew without U5301_rf, error 56, restored the nickels, installed both mikruhi and sewn without errors. Conclusion: without u5301_rf, there will be error 56.

According to various feedbacks received on online forums, many users have complained about the iTunes error 56 when they try to restore iPhone with iTunes or on iPhone.

What happens when error 56 occurs? Well, this error 56 basically prevents you from updating your iPhone and restoring it via iTunes. Even though iTunes is the most trusted and reliable software, specially designed by Apple to manage iOS devices. Since this off-beat error is becoming increasingly prevalent, we decided to bring out an article on why iTunes error 56 occurs, and what are the ways to tackle it.

Let us go through the reasons and the solutions to fix iPhone error 56 one by one.

Part 1: Possible reasons for iPhone error 56

There are many reasons for iPhone 6 error 56 and it usually occurs when users try to update or restore their iDevice via iTunes. Given below are some causes for iTunes error 56:

  1. A temporary software glitch either in your iDevice or the iTunes platform can cause iTunes error 56.
  2. Many-a-times the lighting cable or its components get frayed and damaged which tends to disturb the connection between the PC and your iPhone due to which error 56 iPhone 6 may appear on the iTunes screen.
  3. If your PC is outdated and does not support the latest iTunes update, be prepared for such hassles while updating or restoring your iPhone.
  4. This error 56 may seem weird and confusing but it does not pop-up randomly. There are many other speculations for error 56 as well but the pointers are given above, according to us, are the most common and obvious reasons behind iPhone 6 error 56.

Part 2: How to fix iPhone error 56 without data loss using dr.fone?

You can fix iPhone error 56 without data loss by using dr.fone - System Repair, a software developed to repair all sorts of iOS issues. It does not tamper with your data and guarantees a safe recovery. You can use this toolkit yourself on your personal computer.

Follow the steps below to fix iPhone error 56.

Step 1. To start with, download and run dr.fone on your personal computer and connect the iPhone to it. Now various options will emerge before you. Select “Repair” and move on.

Step 2. Now, the software will detect the iPhone. You must hit “Start” to proceed further.

Step 3. You will now be required to boot your iPhone in DFU mode by pressing the Power on / off and home button. Release only the Power on / off button after 10 seconds and once the DFU screen appears, release the Home Button also.

Step 4. For this step to succeed, you must feed in the information correctly about your iPhone and firmware details before hitting “Download”.

You will now see that firmware is being downloaded. You can also monitor its status like in the screenshot below.

Step 5. After the firmware is downloaded completely, click Fix Now and let dr.fone to perform its task to repair the iPhone and fix all glitches. Once this is done, the iPhone will restart normally.

We recommend using this method because it is the best way to fix iPhone 6 error 56 and many other iOS issues. Once the software finishes its work, your iPhone / iPad will function normally again with the latest iOS system.

Part 3: Try to use another lightening cable to connect iPhone

You may use a different cable to connect your iPhone because a lightning cable is a very important hardware component while updating or restoring iPhone using iTunes. It establishes the connection between the iPhone and your PC.

In case the cable is damaged or not of appropriate size and specifications, you will not be able to update and restore your iDevice due to iTunes error 56.

We suggest that you try using Apple's original lighting cable for the said job and try connecting your iPhone to the computer again. Once you do this, repeat the steps to update or restore your iPhone and see if the issue still persists.

Apple's lightning cable has certain specific details described in the screenshot below. Try not to use any other or local and cheap cable to connect your iPhone to iTunes via your PC.

Part 4: Try to restore iPhone on another computer

You can also try to restore your iPhone on another computer because there might be a chance that your computer does not support iTunes and its operations. For example, a 64 bit iTunes will not work on a 32 bit PC. In such a case, download the latest and appropriate version of iTunes on a different computer and install it by logging in with your Apple ID and password. Connect your iPhone to this computer and try to restore it again.

Part 5: Restore iPhone in DFU mode to fix iPhone error 56

For our readers, here is the step-by-step instruction in order to fix error 56 iPhone 6:

1. Firstly, connect your iPhone to your PC using a lightening cable.

2. Now boot your iPhone in DFU Mode. To do this, just press the Power On / Off and Home button together for 8-10 seconds. Now Release the Power On / Off button only. Once iTunes identifies your iPhone in DFU Mode / Recovery Mode, release the Home button as well.

3. You will see a pop-up on the iTunes interface and your iPhone’s screen will turn black as shown below. Click on “Ok” and move on.

Finally, click on “Restore iPhone” at iTunes and wait for the process to get over.

Note: You will not see any error message on the iTunes screen while the restoration process is on.

iTunes error 56 iPhone 6 is not a complicated issue and can be dealt with ease if you analyze the problem and take the necessary steps to fix it yourself. The methods given above are amongst the best techniques to tackle error 56, so go ahead and try them now to update / restore your iPhone without any difficulty.

Apple devices only work flawlessly in a perfect world. But in reality, they are also prone to failure. Let's take a look at the causes of common errors that occur during iPhone updates.

Error 9

These errors occur if you unplug the power cord while updating or restoring iOS from using iTunes... Apple recommends installing a fresh version of iTunes in this case and restoring iOS again after rebooting. If that doesn't work, take a different USB cable and repeat the procedure on a different computer.

If errors occur again, please contact us.

Errors 4005, 4013, 4014

Error 29

This error message appears in several cases: iTunes version is out of date, USB cable problems, or battery failure. The first two reasons can be easily solved, we will replace the battery in half an hour.

Error 9006

This error has nothing to do with iPhone or Tunes. It occurs due to blocking access to Apple servers. Disabling your firewall or firewall will help solve this problem.

Error 56

Most often occurs on the sixth generation iPhone. Indicates a problem with the NFC chip. We fix such a breakdown in a few hours.

Error -1 or 1

These types of errors are caused by failure of the flash memory or radio module. Despite the many tips from the Internet, this problem cannot be solved at home.

Error 3194

If such an error appears during an iPhone update, when the status bar is 75% full, this indicates a breakdown of the radio module. We fix the breakdown in XX minutes, come. It will be possible to update iOS only after repair.

Error 1669

This is a hardware error. To fix it, you will need to replace the u601_rf and u501_rf microcircuits. We make such repairs in XX minutes.

Error 40

Occurs due to blocking access to Apple servers. Disable your firewall and firewall, and then try updating your iPhone again. If the error persists, come to us.

Error 14, 53, 27

The error occurs due to a malfunction of the modem, Wi-Fi module, power connector, or battery. We can say more precisely after the diagnosis.

Error 47

Occurs when iPhone gets wet. Indicates a problem with the IMEI storage chip. Diagnostics will be required to understand whether repairs are possible or not.

  1. Iphone freezes, what to do?
  2. Why won't the iPhone turn on?
  3. IPhone Errors and How to Solve Them
  4. ITunes Errors
  5. An unknown iPhone error has occurred
  6. Failed to recover iPhone error

Sometimes users of Apple smartphones have various problems and various unpleasant situations. Iphone does not turn on, freezes or gives errors when connecting to iTunes. How and why does this happen? There are many reasons - errors in the firmware, or problems with the loop, various malfunctions in the program, another reason may be physical damage or moisture ingress. In general, anything can get lost, and this becomes a big problem in the event that you urgently need to make a call, access the Internet or use other functions of the iPhone.

Iphone freezes, what to do?

There are two solutions to this problem: a banal reboot and do full reset- restore iPhone via iTunes.

Recovery should be done only if the iPhone did not respond to the first attempt to overload it.

Restarting the iPhone is very simple, we find the Power button and the Home button on the phone, hold down both buttons and hold for about 10 seconds, until the phone goes out. Then we turn on the iPhone and see the result.

It is important, before doing the recovery, do not forget to save all data and information, otherwise after the reset you will lose everything irretrievably! You can also do it differently - hold down the "Power" and "Home" buttons for 3-4 seconds. and turn on the iPhone exactly at the moment when the display goes out.

In the event that the reboot did not lead to anything, connect the iPhone to iTunes. Now you need to wait until the program detects your iPhone, click on the iPhone icon on the top of the toolbar and then on the "Restore iPhone" button below.


Now you know what to do if Iphone freezes and how to hard reset iPhone.

Why won't the iPhone turn on?

This question is relevant for all iPhone owners. Today, all new smartphones, gadgets and other high-tech devices, and especially mobile equipment, sometimes fail. This may be due to various factors.

So, what to do if iPhone won't turn on. Initially, you need to make sure that the phone's battery is charged. If the screen does not light up within 10-15 minutes, try to reboot as described above. The screen lit up, and you saw the logo, then everything is in order, if not, we are taking the iPhone to the service center.

Let's take a look at the reasons why our phone might stop working.

If shortly before the incident you had active contact with water - a rainstorm, stay near a reservoir, then you can even be sure that the water droplets that got inside caused the phone to malfunction. To do this, you need to, as quickly as possible, quickly disassemble the iPhone into parts that can be disassembled, including removing the battery. Gently wipe all this and leave on the surface for a day to dry the moisture. After that, there may not be a need to go to the workshop.

Also, the reasons for the malfunction of the iPhone can be:

  • internal short circuit caused by overheating and vice versa;
  • mechanical damage, in particular falls, to which not only the display and the touch system are sensitive, but even the motherboard;
  • failure of the battery or power controller;
  • violation of interactions within the food chain;
  • software failure;
  • manufacturing defects.

IPhone Errors and How to Solve Them


IPhone owners sometimes face errors popping up on the computer screen when connecting the phone to iTunes. This is very frightening for many users, especially if they have recently purchased an iPhone and have no experience with such gadgets at all. But since the error is assigned a number, we understand that there is a solution to such a problem and you can figure it out yourself without contacting specialists. So how dangerous are these 4005, 4013 and 4014 and how to get rid of them.

Cord and iTunes icon on iPhone screen

Often iPhone users will see an image of a USB cable and an iTunes icon on the screen when they try to update the firmware to a newer one.

Don't panic prematurely and take your phone to the workshop, it's just that your iPhone is in Recovery Mode. Also, Cable and iTunes, besides “Recovery Mode”, may mean “Recovery Loop”, which is different from Recovery Mode.

In order to understand and determine what mode your iPhone is in, displaying a USB cable and iTunes, we will describe the results of research acquired as a result of the operation of these mobile Apple devices.

Recovery Mode

To normal mode iPhone recovery introduced using simple steps. Before putting the device into Recovery Mode, take an original or certified USB cable and simply connect it to your computer (iPhone is not connected yet). Our iPhone must be turned off, hold down the "Power" button until the display goes out. After the iPhone has turned off, we enter it into recovery mode.

Clamp the bottom Home button and hold it. Then we connect the USB cable to the iPhone while continuing to hold the Home button. Apple iPhone will start loading and after the iTunes logo and the cord appear, the Home button can be released.

In the event that after these simple manipulations a cable icon appears on the phone screen and iTunes means the Recovery Mode is running. You can now launch iTunes on your computer and update or restore your iPhone.

Loop mode (Recovery Loop)

It happens that after a forced restart, the iPhone keeps loading a black screen over and over again, which depicts a cord and iTunes. This means the iPhone is in Loop mode. ITunes is the reason your iPhone is in this mode. There are various reasons, for example, you may have seen a message from iTunes about, the reason for this may be that your security software prevents the iPhone from connecting to the Apple update server or something is blocking the download of the firmware. Recovery Loop may occur as a result of software, hardware or consumer failure (accidentally pulled out the cable).

To get out of the loop and return the iPhone to a working state without losing information, you need to use the program TinyUmbrella, some users have difficulties with TinyUmbrella, in which case it is necessary to use the program RedSn0w... There are also other programs to exit the Recovery Loop - iReb and RecBoot.

There are times when iPhone users can't get their phone out of Recovery Loop using the above programs and after rebooting we see the USB cable and the iTunes logo on the screen again. In this case, you will not be able to save all the information on the iPhone, but it is good if you made a backup before.

If you have caught the "loop" of recovery, then all you have to do is connect your iPhone to iTunes and try to install iOS. Sometimes it is impossible to flash the iPhone in this mode, then it is put into DFU mode and again they try to flash it (DFU mode, Device Firmware Update is the device firmware update mode. Refers to emergency modes and is recognized by iTunes when connecting iPhone or iPad to computer using USB cable as recovery mode). As a result of the firmware, the iPhone erases all information, and we restore it from the backup made earlier.

When does the error pop up?


Often errors 4005, 4013 and 4014 bother us when we sync iPhone with iTunes on PC. First, you need to calm down. Our iPhone and iTunes software are developed by one company - Apple, and this means that disruptions in the performance of a smartphone cannot be significant. Apple has very smart people and they know their stuff. Be that as it may, no one is immune from this kind of errors, and we are also talking about IT technologies, and not about some primitive mechanism. IT technologies are a collection of many knowledge that is materialized in one small device, so it is very difficult to achieve its flawless performance.

These errors - 4005, 4013, 4014 - are the result of a conflict between the computer and the iPhone. In other words, the emergence of a conflict situation can almost be a regularity and finding an iPhone that would work without glitches is almost unrealistic!

How are problems solved?

Service Apple support gives the exact algorithm of actions if suddenly you see a pop-up window on your PC - iTunes error with a specific number.

To begin with, you need to make sure you have the latest version of iTunes installed. Since each new update carries something new and may not always work correctly on the old version. In the event that you have the latest version of iTunes installed, then a restart is required. In the process of rebooting RAM restored or completely cleared. After that, you need to make sure that the computer is available Latest updates... And most importantly: updates must be obtained from an official vendor. Try changing the USB cable. Update errors are sometimes due to bandwidth USB cable. Even a device as simple as a USB cable for the iPhone can interfere with your work. Of course, in our case everything is different and it is better to take a different cable. If the errors appear again, then try connecting the iPhone to another PC and doing all the steps again. If errors continue to pop up, then try to perform repeated actions, but on a different computer. Try changing your iPhone battery. As strange as it may sound, as I did not want to find meaning in this action - and such advice is often found on the net. But the most interesting thing is that, according to the specialized forums, replacing the battery helped a lot. And finally, try to restore your iPhone in the so-called DFU mode... To do this, hold down the "Home" and "Power" buttons for 10 seconds, and then only "Home" and also for 10 seconds.

ITunes Errors

Have you ever encountered these annoying iTunes errors that are far from easy to find a solution to? With this list of answers, you will be able to easily solve all your iPhone and iTunes related issues.

Error 0x666D743F

Cause of occurrence:

  • There is a file conflict during startup. Appears to Windows users
  • You need to go to the "Control Panel" on your computer, then run the "QuickTime" settings and activate "Save Mode" in the "Audio" tab.

Errors 0xE8000001,0xE8000050

Cause of occurrence:

  • iTunes cannot install the required applications on your iPhone.
  • Try updating iTunes to the latest version.
  • This error often appears when trying to install hacked applications. If an error is the reason for this, you need to make a "Jailbrake" of the iPhone.

Error 0xE8008001

Cause of occurrence:

  • Some applications have the wrong digital signature (the application has been hacked).
  • To install hacked applications, you need to do jailbreak iPhone and then install "AppSync" (a patch for the mobile device installation system that allows you to install hacked applications both through Installous and using iTunes from a desktop PC) from Cydia.

Error 0xE8000013

Cause of occurrence:

  • A simple synchronization error, sometimes it pops up for everyone.
  • Synchronize your smartphone again, reboot if necessary.

Error 0xE8000065

Cause of occurrence:

  • There is a problem with the operating system or with iTunes.
  • Restarting the PC will help, and changing USB port... If after that the error pops up again, you need to reflash the iPhone.

Error 1

Cause of occurrence:

  • This error may appear if you decide to flash your iPhone with an unsuitable firmware version!
  • Make sure to this firmware goes to the iPhone. If you are sure it is up to date, then simply update iTunes to the latest version.

Error 2

Cause of occurrence:

  • This error is very rare, because it appears when flashing iPhones of previous generations to an unofficial firmware with hacking and an ASR patch.
  • Find a different firmware.

Errors 6, 10

Cause of occurrence:

  • This error occurs when installing an unofficial firmware with boot recovery logos different from the standard ones.
  • Reflash the iPhone using a different unofficial firmware without custom boot recovery logos, or use a verified custom (unofficial) firmware.

Error 9

Cause of occurrence:

  • Kernel Panic - This error is similar to the Blue Screen of Death in Windows computers. It means that there was a failure in the kernel of the iOS system.
  • Practically does not occur when using standard firmware. If you are using unofficial firmware, then you need to look for a new one.

Error 10

Cause of occurrence:

  • It may appear when using unofficial firmware. If you encounter such an error, it means that there is no LLB (Low Level Bootloader) in it, which is responsible for booting the system.
  • Download new custom firmware.

Error 11

Cause of occurrence:

  • There is no BBFW in the firmware.
  • Download the firmware again from the official source or use the archiver and add the missing file to the firmware container.

Error 13

Cause of occurrence:

  • This error occurs when using a damaged USB cable or an inoperative USB socket.
  • Find another USB cable. If the error persists, then you need to reinstall the system or use another computer.

Error 14

Cause of occurrence:

  • This problem appeared due to an unsuccessful attempt to jailbreak, or a damaged USB socket.
  • Try replacing the USB connector, if it does not help, then you need to reflash the iPhone.

Error 17

Cause of occurrence:

  • Such an error can occur when updating an unofficial firmware to another.
  • In order to update the custom firmware to a new one, you need to use the recovery mode and flash using the DFU mode.

Error 20

Cause of occurrence:

  • Can't flash iPhone because it is in recovery mode
  • You need to put your iPhone in DFU mode.

Error 21

Cause of occurrence:

  • IPSW signature verification mode is not disabled (stands for “iPhone Software.” Files with the .ipsw extension are an archive with mobile components operating system iOS, prepared for installation on an iPhone, iPad or iPod touch, every time the device is updated, iTunes downloads a new IPSW from Apple servers, the files are used by users to learn how iOS works on the iPhone, as well as for jailbreak and unlocking), may appear during the operation of an unofficial firmware.
  • When this error appears, you need to install custom firmware using PWNed DFU. In this case, it is recommended to create custom firmware using PWNageTool (program for creating firmware)

Error 23

Cause of occurrence:

  • Most likely the problem is with the "hardware" component of your iPhone. It can be determined if the smartphone does not detect the IMEI or Mac address.
  • Unfortunately, only a service center will help in such a situation.

Error 26

Cause of occurrence:

  • NOR is not suitable for this firmware version.
  • Just download another firmware file from a trusted source.

Errors 27, 29

Cause of occurrence:

  • It may appear only on older versions of iTunes 8-9.1 in Windows.
  • Update iTunes to the latest up-to-date version.

Error 28

Cause of occurrence:

  • Most likely the problem is with the iPhone's 30-pin connector.
  • This error can only be solved by going to the service center.

Error 35

Cause of occurrence:

  • This error is specific to Mac OS X and occurs due to incorrect access rights to the folder with the iTunes library.
  • You need to launch the Terminal application, enter your own, and then enter the code - sudo chmod -R 700 Users Music iTunes iTunes Media.

Error 37

Cause of occurrence:

  • Occurs when using an unofficial firmware (if LLB from another gadget is present in the custom)
  • You need to create a new custom firmware using the correct LLB.

Error 39

Cause of occurrence:

  • This error occurs when there are problems with the photo album or with access to the Internet.
  • Create a new photo album, also update iTunes to the latest version, and disable firewalls and antiviruses on your computer.

Error 54

Cause of occurrence:

  • Occurs when it is impossible to copy an application from the phone. Often appears when copying cracked applications or when copying licensed applications to a computer that is authorized in iTunes
  • Initially, you need to authorize your computer in iTunes Store... To do this, open the "Store" tab then "Authorize Computer".
  • If it does not help, then you need to go to the tabs "Settings" "Synchronization" "Reset sync history", then delete the folder located at C: Documents and Settings / All Users / Application Data / Apple Computer / iTunesSC / Info. After that, authorize the computer again.
  • And one more way to solve. You need to go to the folder with the library, then move the "Music" folder to another location. Synchronize your iPhone with iTunes, then return the "Music" folder to its original location and sync again.

And the hardest way. For advanced users only:

  • Open Cydia and load SwapTunes. This tweak allows you to sync your iPhone with multiple media libraries;
  • Launch SwapTunes;
  • Open iFile and go to var / mobile / media /;
  • Find the iTunes_Contrlol2 folder and remove the number 2 from the name;
  • The iTunes Control folder should only be deleted after a new folder has been created;
  • Now you can uninstall SwapTunes and sync your phone with iTunes.

Errors 306, 10054

Cause of occurrence:

  • I'm having problems accessing the internet.
  • It is necessary to disable all proxies, disable firewalls, firewalls and antiviruses.

Error 414

Cause of occurrence:

  • The content you are trying to download is in the 17+ category
  • You need to change the year of birth in your Account Information.

Errors 10 **

Cause of occurrence:

  • Such errors can occur when flashing for more old version(downgrade) or updating the modem to an inappropriate version.
  • You need to download and run TinyUmbrella, then click on the "Kick Device Out of Recovery" button.

Error 1008

Cause of occurrence:

  • iTunes cannot recognize characters entered in the Apple ID. May occur due to incorrect system encoding.
  • Open the tabs "Store" "View my account».
  • If everything is entered and displayed correctly in the window that opens, then click "Store" "Exit".
  • Now we need to switch the system encoding to UTF-8 or Win5112, after which we can log into the account again.

Error 1015

Cause of occurrence:

  • Problem while checking the firmware file.
  • This problem often appears when trying to flash a smartphone to an old firmware version. Remember that for downgrade you need to use the saved SHSHs, if you have not saved them, you can forget about downgrading.
  • It can also occur due to blocking of Apple servers by the system, in order to solve this it is necessary to erase all information about Apple servers from the host file, which can be found at C: / Windows / System32 / drivers / etc / hosts (Windows)
    etc / hosts (Mac OS X).

The code looks like this:

  • 74.208.105.171 gs.apple.com

Errors 14 **

Cause of occurrence:

  • Most likely, you downloaded a corrupted firmware file or you have a faulty USB socket.
  • Download a different firmware and try a different USB port.

Errors 16 **

Cause of occurrence:

  • The system for checking the firmware files is not disabled.
  • It is recommended to jailbreak your iPhone. If you want to install unofficial firmware from iOS 4/5, then when this error occurs, you need to use PWNed DFU.

Errors 1600, 1611

Cause of occurrence:

  • The unofficial firmware you are trying to install on the iPhone is not compatible with DFU mode.
  • You can use "Recovery Mode", it didn't help - download a different firmware.

Error 1619

Cause of occurrence:

  • The iTunes version is not compatible with your iPhone.

Solution: update iTunes.

Error 1644
Cause of occurrence:

  • There was a problem reading the firmware files.
  • This error occurs very often. Make sure no applications are using the firmware file. In the event that the error continues to pop up, restart your computer.

Errors 20 **

Cause of occurrence:

  • There is a problem with the cable or USB port on the computer.
  • Take a different cable or use a different USB connector. If the error persists, use another computer.

Error 2005

Cause of occurrence:

  • Occurs when the iPhone is damaged. iTunes cannot confirm the request from the phone.
  • A trip to the service center!

Errors 3000, 3999

Cause of occurrence:

  • There is a problem trying to reach the Apple server.
  • Make sure ports # 80 and # 443 are open on your computer. If you have antivirus or firewall enabled, then add the gs.apple.com address to the trusted (exceptions)

Errors 3001, 5103, -42110

Cause of occurrence:

  • iTunes cannot download video files, hash problems.
  • Update iTunes and QuickTime to the latest version.
  • If the problem persists, delete the SC Info folder, which is located at the addresses:

C: / Documents and Settings / All Users / Application Data / Apple Computer / iTunes (Windows XP, 7)
C: / Program Data / Apple Computer / iTunes (Windows)
users / Shared / SC Info (Mac OS)

Errors 3002 and 3194

Cause of occurrence:

  • Problem accessing the gs.apple.com server. The reasons for this are: the changed Hosts file, as well as the lack of saved SHSHs, which are needed to perform downgrade. It is possible that Apple's servers this moment just overwhelmed and need to try again later.
  • When downgrading the firmware, make sure that you have saved SHSHs, if they are missing, then just forget about downgrading and afterwards always save SHSH using TinyUmbrella. Important - SHSH are unique and it is not possible to download them from the Internet.
  • Also note that the error can occur when flashing to the official iOS version, make sure you are reflashing to current version iOS.

Error 3004

Cause of occurrence:

  • Your computer does not have network access.
  • Connect your computer to the internet. If the error persists then turn off firewalls and antiviruses.

Error 5002

Cause of occurrence:

  • There was a problem with the payment.
  • You need to delete your credit card information from Account Billing Information, and then download any free app and add your credit card again.

Errors 8008, -50, -5000, -42023

Cause of occurrence:

  • iTunes cannot write the downloaded file to disk.
  • You need to delete the following folders:

Mac OS X: ~ Music iTunes iTunes Media Downloads

Windows XP: C: / Documents and Settings / Username / My Documents / My Music / iTunes / iTunes / MediaDownloads

Windows Vista: C: / Users / Username / Music / iTunes / iTunes / MediaDownloads

Windows 7: / C: Users / Username / My Music / iTunes / iTunes / MediaDownloads

  • Now go to the Store tabs Check Available Downloads.

Error 8248

Cause of occurrence:

  • This is a rather rare error, which is caused by a conflict in the Memonitor.exe process, which can be launched by applications such as Sprint Music Manager. Occurs only on Windows.
  • Open Task Manager and end the Memonitor.exe process, then remove any applications that might be running it.

Error 9006

Cause of occurrence:

  • The error occurs when there is a problem while downloading the firmware to iTunes. There is a possibility that the download was blocked by antivirus or firewall.
  • You need to update iTunes and then disable all antiviruses and firewalls.
  • You need to download the firmware from the Apple website or from trusted sites. After that, to flash it, you need to press Shift + Update for Windows, Alt + Update for Mac OS X and select the downloaded firmware file in the iTunes window that opens.
  • You can also upgrade to automatic mode without selecting the firmware manually, to do this, copy the downloaded firmware file to the addresses:

(Windows XP): C: / Documents and Settings / Username / Application Data / Apple Computer / iTunes / iPhone / Software Updates

(Vista and Windows 7): C: / Users / Username / AppData / Roaming / Apple Computer / iTunes / iPhone / Software Updates

(Mac OS): user / lybrary / itunes / iphone / sofware update

  • If you did everything correctly and did not rename the firmware file, then iTunes will use the firmware you downloaded and will not download it from the Apple server.

Error 9807

Cause of occurrence:

  • An issue was detected while connecting to the server to verify certificates as well as firmware signatures.
  • Since the error pops up if various antiviruses and firewalls are running, then you just need to open access for such addresses: evintl-ocsp.verisign.com and evsecure-ocsp.verisign.com

Error 9808

Cause of occurrence:

  • There was a problem logging into the iTunes Store.
  • You need to go to the following iTunes tabs: "Start" - "Control Panel" - "Internet Options" - "Advanced" and check the boxes SSL 3.0 and TLS 1.0. Reboot the system for the changes to take effect.

Error 9813

Cause of occurrence:

  • iTunes has discovered a problem with key files called Keychain. This file is the root keys that are used in some applications. May only pop up on Mac OS X.
  • Clear the cache of the Safari browser, and then copy the files “X509Anchors SystemRootCertificates.keychain” and “SystemCACertificates.keychain” to the address: System / Library / Keychains X509Anchors. Such key files can be copied from any Mac with a similar operating system version.

Error 13001

Cause of occurrence:

  • Apparently there was damaged file iTunes libraries. Often, such an error can pop up for those who use an external drive to store a library file.
  • You need to create a new iTunes library file, delete the corrupted iTunes Library.itl file located in the iTunes folder. Now you need to launch iTunes and the library file should appear by itself.

Errors 13014, 13136, 13213

Cause of occurrence:

  • Problems with iTunes.
  • Try restarting your computer.
  • Close iTunes and also disable antivirus software and brandmauser. Launch iTunes and sync again.
  • You need to disable Genius, which is located in the sidebar of iTunes (open the "View" tab - "Hide Genius Sidebar").
  • Download latest version iTunes, and install.

Error 13019

Cause of occurrence:

  • ITunes library problem.
  • Try to find out when syncing what content the error pops up. As soon as you find this, cancel the sync of this content and sync the iPhone over again. If the synchronization was successful, you can try to include the problematic content in the synchronization.
  • Go to the folder where the iTunes library file is located. By default, it is located at "My Music" - "iTunes", after that move the iTunes Library file to another location (do not delete it!) And try to sync. If the error does not appear, move the iTunes Library file back.

Error -39

Cause of occurrence:

  • I can't download purchased music from the iTunes Store.
  • Download the latest iTunes and QuickTime from Apple's official website.
  • Turn off all web accelerators, then restart your computer.

Error -50

Cause of occurrence:

  • The error pops up due to the lack of connection to Apple servers. Apparently, access to servers can be denied by antivirus or firewall.
  • Turn off your antivirus and firewall. Open the itunes.apple.com and ax.itunes.apple.com servers.
  • The error can occur when uploading video files. Clear your video download cache, which can be found at:

Windows XP - C: / Documents and Settings / User name / My Documents / My Music / iTunes / iTunes / Music Downloads.

Windows Vista - C: / Users / username / Music / iTunes / iTunes / Music Downloads.

Mac - HomeDirectory / Music / iTunes / iTunes / Music Downloads

  • In these folders, you need to find the problem video file that will have the TEMP extension (* .tmp). In order to see extensions, you need to enable the ability to view them in the folder properties. After you remove this file just start uploading the video file again.

Error -3221

Cause of occurrence:

  • iTunes cannot reach the iTunes Store servers, most likely the problem is file blocking.
  • You need to change the permissions for all iTunes files, as well as iTunes Helper, allowing these files to transfer data to other servers.

Error -3259

Cause of occurrence:

  • Problem connecting to Apple servers.
  • You need to log out and log into your iTunes Store account, if the error persists, download and install the latest version of iTunes, and you also need to clear the list of active downloads in iTunes.
  • We go into start and open the system utility "Run", in which you must enter "msconfig". In the window that opens, you need to check if iTunes and QuickTime are in the autorun list. We also check if there are services "AppleMobileDevice", and "Service iPod". If necessary, set up their autorun, and then restart the computer.
  • Disable your antivirus and firewall.

Errors -9800, -9812, -9815, -9814

Cause of occurrence:

  • Errors occur if the system time is different from the time in the iTunes Store.
  • Set the current time in the system. We recommend that you synchronize the date and time with Apple's servers.

Now you know how to fix iPhone and iTunes errors. Dear iРhone owners, if you yourself could not solve the problem that bothers your iPhone, write to us at email [email protected] website or online chat and our specialists will be able to help you.

Although the technical and software products of the Apple holding are considered one of the most functional and reliable in the world, this does not mean that all devices of the holding are completely protected from errors and factory defects.

Moreover, in the first few months after the release of new devices on sale, users necessarily find a couple of deviations from the norm, which the company eliminates with warranty replacements and releases of updated firmware.

When error 56 occurs, visit the website's page for troubleshooting.

What does error 56 mean on iPhone?

Users of the sixth generation and older iPhones of the 9.7-inch Pro encountered one of these errors. It turned out that after updating the iOS operating system to version 9.3.2 and above, the gadget completely freezes, giving out a black screen or requiring to reconnect to the iTunes media service. But even after the required connection, the device continued to hang on the lanyard, not reacting in any way to the efforts of the owner, and all attempts to roll back the update and restore the system ended with error 56 iPhone 6.

Alas, the users themselves could not find any simple methods of fixing the bug, and then the employees of the "apple" company itself intervened in the matter. The developers officially recognized the existence of the described flaw and even posted a recommendation to fix it. According to them, in order to return the iPhone to its normal state, it is necessary to reconnect it to the computer, but be sure to use the original Lightning cable, and repeat the recovery procedure several times in a row. On one of these attempts, the smartphone should begin to function normally, but if this does not happen, it is recommended to contact the official Apple technical support.

Nevertheless, many users note that this method does not solve such an unpleasant problem in any way, and the support service almost does not respond to requests. In this situation, only one option is possible - contacting experienced specialists in repair shops. For example, the employees of the Kiev mobile center Ai-Yai-Yai managed to find out that in 75 percent of problem cases, error 56 is eliminated by replacing NFC (Near Field Communication). As you know, this technology is responsible for short-range wireless communication and is used in almost all modern mobile phones.

SIMILAR ARTICLES