I'll show you how to recover disk using the HDD Regenerator 2011. Using the Crystal Disk Info program I checked my hDD. Faced here with such a problem.
As you can see on my disk, reassigned sectors have appeared, unstable sectors, incorrigible sectors errors.
I will show how to recover disc using the HDD Regenerator 2011 program.
Download hDD program REGENERATOR 2011 (it is free). Considering from the disk S.M.A.R.T. Information The program also shows that my disk is dying. And it is recommended to make a copy of all files on the disk (Backup Data Immediately).
Check and you are your condition hard diskAs I showed on video.
1. Create a bootable flash drive to restore damaged sectors.
To use a damaged disk recovery program, make a loading flash drive to safely boot from it and check the disk check and restore damaged sectors. To do this, you will need a flash drive of more than 1 GB.
If you try to recover defective disk sectors directly from under Windows (XP / Vista / 7/8), then the Unable to Obtain EXCLUSIVE Access To Hard Drive. 1, BECAUSE DISK IS IN USE. Failed to access the hard disk with, as it is used.
Return to the Main menu of the program and click Boot USB Flash. To make a bootable flash drive to restore damaged sectors.
If an error was issued ERROR HAS OCCURD! Bootable Regenerating Flash Not Created! An error has occurred! The recovery boot flash drive was not created.
Then first format the USB flash drive and erase with it all the data. Press Reset Flash size.
All data on the flash drive will be destroyed and the flash drive is reformatted. Click OK.
Select a USB flash drive and click OK.
Ready. Now we have a boot flash drive to restore damaged sectors on the disk. The program asks to restart the computer now? Click Yes. By the way, a very good solution to the problem is SSD Disc You can in the article.
2. Establish the bootable USB flash drive in the BIOS is first place according to the degree of importance of loading.
Now go to the BIOS by pressing F2 or Del or F10 or the key, which is indicated at the very beginning when you turn on your computer left below
On my notebook Samsung We must click F2 to enter the BIOS.
Here are all devices that can be loaded. In my case, priority is so:
1. USB HDD: WD MY PASSPORT 0743
2. IDE HDD: ST500LM000-1EJ162
3. IDE CD: TSStcorp CDDVDW TS-L633A
8. USB HDD: SanDisk Cruzer Blade
that is, first reading and searching for boot information from outdoor hard disk, then if it is not found, it turns out the search for an internal hard disk, then if not found to the DVD drive, then to the flash drive. And you need to put in order to initially search for boot information from the flash drive.
Select a USB flash drive and click F6 to raise it higher in first place.
Ready. Now the boot information will be first signed on the flash drive.
Restart the computer.
3. Restoration of damaged sectors with HDD REGENERATOR 2011
So now we boot from the flash drive. There are disks connected to a computer. I have
This 1 disk is simply divided into 2 parts. Choose the one that is more, i.e. Number 2 (score on the keyboard) and press ENTER.
To begin with, we will make a preliminary scan and find out how much bad sectors are on the disk. We recruit the number 1 on the keyboard and press ENTER.
1. Start Sector 0. Start from sector 0.
2. Resume Last Proccess. Resume the previous process.
3. Set Start / End Sectors Manually. Install the initial \\ end sector manually.
Let's start scanning from zero (initial) disk sector. We recruit the number 1 on the keyboard and press ENTER.
Pre-scanning and search for damaged and bad sectors began.
After some time, the preliminary scan found that I have bad and damaged sectors on the disk.
After 1 hour and 48 minutes, the preliminary scan of the result and showed that I had more than 46 damaged sectors on the disk. They are denoted by the letter B - Bad. Disk delays (124) were also discovered, they are denoted by the letter D - Delay.
1. List SCANNED. List of scanned sectors.
2. List This Session Sectors. List of sectors of this session.
3. List All sectors. List of all sectors.
4. CLEAR DRIVE MAP STATISTICS. Clear disk statistics.
Browse a list of scanned sectors. We recruit the number 1 on the keyboard and press ENTER.
Here is a list. Looking at it, press any key to exit the list.
1. PRESCAN (Show Bad Sectors). Pre-scanning (Show bad sectors)
2. Normal Scan (With / WithOUT REPAIR). Normal scanning (C \\ without recovery)
3. Version info. Version information.
4. Show Statistics. Show statistics.
Now let's start scanning and restoring damaged sectors. We recruit the number 2 on the keyboard and press ENTER.
1. Scan and Repair. Scan and fix.
2. Scan, But Don't Repair (Show Bad Sectors). Scan, but not correct (show bad sectors).
3. REGERATE ALL SECTORS IN A RANGE (EVEN IF NOT BAD). Restore all bad sectors in the range (even if not bad).
We recruit the number 1 on the keyboard and press ENTER.
1. SCAN SECTORS 0. Start from sector 0.
2. Resume Last Proccess. Resume the last process.
3. Set Start / End Sectors Manually. Install the initial \\ end sector manually.
Let's start scanning and restoring the damaged disk sectors from the zero sector. We recruit the number 1 on the keyboard and press ENTER.
Scanning and restoring sectors began. This can take a lot of time (up to several days) depending on the size of the disk and the number of damaged sectors. But you can finish recovery and scan, and continue it later, at least a few days or even weeks. Your progress will continue on the flash drive and the place where you stop.
After about 2 hours, progress ended by 45% and 140 damaged sectors on the disk were detected.
After about 8 hours, the progress was 55% and 827 damaged sectors on the disk were detected and restored.
After about 20 hours, the progress was 56% and 5,753 damaged sectors on the disk were found and restored. And on top of the right, Interface Hang-Up appeared! Set-Up Bios to Compatible IDE Mode! Interface hook! Install BIOS into a compatible IDE mode. But in my BIOS there is no IDE mode. I have a laptop and there is only SATA mode. This is a program error, because She thinks that the hard disk does not work in that mode, but in fact. The damaged sectors on my hard disk so much so much that the entire recovery process almost hangs and moves ooooooooooochen a medleyeeeeeeeeoeee.
I interrupted the process by pressing the ESC. And downloaded Windows worked in it the behavior of the disk became noticeably better and it began to hide less. Then the next day I again booted from the flash drive and continued the recovery of the disc.
Returning to the main menu of the program.
1. PRESCAN (Show Bad Sectors). Pre-scanning (Show bad sectors)
2. Normal Scan (With / WithOUT REPAIR). Normal scanning (C \\ without recovery)
3. Version info. Version information.
4. Show Statistics. Show statistics.
Continue scanning and restoring damaged sectors. We recruit the number 2 on the keyboard and press ENTER.
1. Continue ProCcess. Continue process.
2. Show statistics. Show statistics.
3. Change Start / End Sectors. Change the initial \\ end sector.
4. CHANGE MODE. Change mode.
5. Exit Program. Exit the program.
We continue the process of restoring damaged sectors. We recruit the number 1 on the keyboard and press ENTER.
The process continues from the same place on which was interrupted.
A day later, the process was 60% and 8,342 damaged sectors on the disk were discovered.
After some time, the process hangs down and restoring 10,001 sectors. DRIVE IS NOT READY appeared! The disc is not ready!
But this is again the problem of specifically my disk, which is already in death and there are disk spaces going into which the disc simply becomes loaded by 100% and tightly hangs and saves from it only shutting down and turn on the computer again.
As a result, the statistics showed that he restored a lot of damaged sectors, but reaching those sectors in which the disk did not depend on the disk to restore them.
Later when trying to continue scanning and restoring damaged sectors on the disk. The program issued an inscription that the disk is not ready, restart the computer and try to continue the process again.
This is a problem of a specifically of my case, in which when switching to a specific disk sector disc fully hung. Then I did not try to restore it (it took a lot of time and I think my disc is no longer possible to restore, only if you cut it in the amount of separating a defective (dead part) from the whole, but then the hard disk will decrease in size) I just copied the data that Could and bought a new hard drive. Stand hard drives for laptops from 1500 rubles. In principle, this is not expensive and can afford.
4. Results
Before buying a new disc, I advise you to try to restore it. And if it does not work for some reason, then buy a new one. Also, never forget to have a second hard disk on which periodically copy all the information from the main disk.
For loyalty, you can still check the hard disk on errors and restore damaged sectors.
Before restoring a hard drive, make sure no important information There is no. For example, consider the WD or Seagate devices. If there are surface defects on them, even the reading of data often impairs their performance, so folders and files after recovery are often inaccessible. To save the data first, it is customary to make a sector hDD image Special program.
Run applications to troubleshoot better from another computer by connecting the damaged hard drive as a backup or boot from the recovery flash drive.
We work with hddscan
Modern hard drive - the device is very reliable, so if there was no fall, the likelihood that the disc is damaged is physically extremely small. Diagnostic utilities, checking the hard disk, take for failed blocks of the sector with incorrectly recorded control sum. This is often due to the fall in the power supply at the time of recording on the HDD, the Seagate, WD USB disk, WD, etc. or in general due to the poor quality of the power supply. But it can be treated, even though the disk behaves like a dead. Start HDDScan first in test mode to determine the number of failed sectors:
- In the main program window, click New Task, it calls the remaining available commands;
- Select the SUFACE Tests command;
- In a new window, select Read Test Method, leaving all user data intact;
- Click Add Test to start checking the hard drive.
Waiting, perhaps will be long - small 250-gigabytes WD disks, Seagate will be tested about 45 minutes. Scanning Structure can be observed in the Test Manager window, if you double-click the RD-read.
Upon completion of testing, you can see all found on the HDD computer of the Bad Sector. They are marked with red and blue. If any, most likely the structure of their logical and can be cured at home.
Repeat that the process will be accompanied by a complete erasure with seagate all information. Therefore, if you have not yet saved important data on external storage USB, it's time to start doing this so that new remote data does not appear on the device.
The sector with such defects is not read and can be restored only by a forced recording of zeros. This is possible in Erase mode. HDDScan completely fills the Seagate disk as a sector zeros, reads information and compares with the checksum. If after this error when accessing the Bad sector is not observed, then WD restores the performance and the system will again be able to fully use it if you write all the deleted data on the drive. This mode is launched in the same way:
- SUFACE TEST window opens;
- The Erase method is selected;
- Start scanning with the Add Test button.
After that, with a high probability, all logic sectors on the device will be able to cure from reading errors at home, and on the device we can safely store folders with information. The carrier damaged as a result of the fall will not be able to correct any program.
We use extended features of Victoria
Many believe that it free app - best utility For resuscitation of HDD WD and Seagate on which remote sectors appeared. Therefore, it is worth understanding how to spend the process recovery hard Disc with Victoria. It can be launched from under Windows, but in this case the probability of successful treatment of the BAD sectors is greatly reduced.
Such a mode is more suitable for testing hard drive. But if you run Victoria from a boot USB flash drive or disk, then it is likely to restore or extend life even completely killed HDD Seagate. In addition, the flash drive is very convenient for working with a laptop, if due to failed sectors, it stopped being loaded.
The program for Windows and to install on a USB flash drive downloads on the developer's website. The ISO image on the USB flash drive can be deployed using the Ultraiso utility.
We test hard drive using Victoria
How to fix broken sectors program Victoria
The WD and Seagate hard disk recovery application is most effectively working in DOS mode, so it's best to load a device with a predetermined boot flash drive With this program.
Before that, do not forget to change the BIOS configuration accordingly, or use the laptop boot menu to select a flash drive as a boot device.
Thereafter:
- The program is loaded from the flash drive, for which in the starting window, select Victoria Russian for Desktop;
- In the main program window, select the desired disc by pressing the Latin P and moving the Up-Down keys;
- Confirm the option HDD key ENTER;
- Enter the hard disk number (in the prog it is called the channel number).
Press F4 Set the scan settings.
Our company is professionally engaged in recovering data and information from damaged external removable disks and work with all manufacturers. We have advanced specialized equipment for successful data recovery and help you if you accidentally deleted the data, formatted the disk, it received physical damage, stopped determined by the computer. Restore data and information from an external disk is not difficult in the initial state when the owner did not deal with independent recovery and the magnetic head blog is even less efficient and does not cause surface damage and it is not required to replace it. External hard drives Evoid popular among users due to their capacity and portability. However, compared to internal drives, they are much more often mechanical exposureWhat leads to troubleshooting, eliminate which only specialists can.
The reason for the failure of an external removable disk can become not only a drop, but also to turn off the power. After the fall, the external removable hard drive receives damage to the magnetic head unit. During the strike, BMG moves to a magnetic surface from the parking area and, depending on the strength of the blow, sticks or gets a fault of BMG. In both cases, the repair of an external removable hard disk is not possible. When sticking on magnetic plastics, BMG needs to be eliminated very carefully without leaving sliders on the surface. To do this, use a specialized tool that allows our specialists to lift it above the surface and transport it to the BMG parking area. The cost of restoring an external disk depends on the volume and the resulting malfunction. The most popular malfunction to recover data after impact or fall, when an external removable disc is glad to stick magnetic heads or damages BMG. After free diagnostics, you can find out the cause of data access loss and we will help you get your data back in full.
As a result, users may encounter problems of different types:
- Fleece of electronics (Winchester ceases to be determined).
- The destruction of magnetic heads in HDD drives.
- Physical damage to the disk.
- Moisture getting inside the housing.
- Restore data from an external disk after formatting.
- Restore data from an external disk after removal.
- The external disk asks to format yourself.
- The external disk is not defined by the computer.
- External disk makes out outsided sounds Not peculiar to it.
Let's describe in more detail the case described above and analyze each item. All these cases, you will need a professional recovery of data from a damaged external hard disk. After a trip, an external removable hard disk can get a malfunction associated with a block of magnetic heads (mechanical). During the strike, BMG can go to the surface or damage the sliders. When you turn on the hard disk, extraneous sounds appear, the storage is beeps or makes clakeing sounds that are more resembling a knock. The external removable hard disk is sickened due to the fact that the block of magnetic heads of the slope on the surface and does not give the spindle engine to gain momentum. In both cases, when foreign sounds appear if the hard disk is sicked or knocks, unfortunately, it is not possible. Only data recovery. Removable drivePortable and remote disk is all definitions of an external hard disk. No matter how you call it, it still lies a hard disk, and the plastic case is a packaging.
Restoring files After deleting or formatting from an external removable disk, in most cases, when the user has not tried to get them independently. The thing is that when deleting a file or partition from an external disk, the data is still on sectors. With a new record, this data may be irretrievably lost. Restoring remote data, files and other information is possible, provided that the external removable hard disk after detecting the loss of data, it was immediately turned off or was not actively used. We will help you to restore remote files From an external hard disk and other drives at the most optimal price.
| Restore data and repair external hard disk. Logical malfunctions. | price, rub. | |
|---|---|---|
| From | ||
| Diagnostics | is free | |
| The disk is not defined and does not start | 1.500 | |
| The disk is defined in the system as RAW | 1.500 | |
| Disk after impact is not determined | 5.000 | |
| Replacing the connector on the USB external disk (without data recovery) | 700 | |
| Replacing the USB board on SATA analogue on an external disk (depends on the disk model) | 2.500 | |
| Recovery after formatting the entire disk or partition | 1.500 | |
| Recovery after deleting information from disk or partition | 1.500 | |
| Failure failure (asks to format yourself) | 2.500 | |
| Data recovery if you are password or encryption on HDD SSD | from 9.000 | |
| Damaged service information or data area | 4.000 | |
| Faulty HDD controller | 1300 | |
| Restore information and repair of an external hard disk with mechanical malfunctions. | price, rub. | |
|---|---|---|
| From | ||
| Diagnostics | is free | |
| Disk 500GB when feeding the power knocking (~ head replacement) | 9.000 | |
| Disk 1000 GB when feeding a power knocking (~ head replacement) | 11.000 | |
| Disk 2000GB when feeding the power knocking (~ ~ head replacement) | 12.000 | |
| Disk 3000GB when feeding the power knocking (~ head replacement) | 14.000 | |
| Disk 4000GB when feeding the power knocking (~ head replacement) | 16.000 | |
| Disk 6000GB when feeding the power knocking (~ head replacement) | 16.000 | |
| Swim the engine spindle or BMG sticking. 500GB disk (beeps) | 6.000 | |
| Jamped the spindle of the engine or sticking the BMG.Disk 1000GB (beeps) | 6.000 | |
| Swim the engine spindle or BMG sticking. Disk 2000GB (Floating) | 6.000 | |
| Swim the engine spindle or BMG sticking. Disk 3000GB (fries) | 8.000 | |
| Swim the engine spindle or BMG sticking. Disk 4000GB (fries) | 10.000 | |
| Swim the engine spindle or BMG sticking. Disk 6000GB (fries) | 10.000 | |
How does an external hard drive work?
Structure external Winchester does not differ from the usual hard disk located in system block or laptop. Inside the case of plastic or metal is standard 2.5 or 3.5 inch media with SATA interface and adapter to USB connector. Usually external disk Located in plastic box, which cannot protect it completely from shocks and damage. Portable external disk after hitting starts or click or squeak. During the strike, the magnetic head unit leaves the parking area and sticks on the magnetic plates. At the same time, when the power is applied, the disk starts to squeak and cannot spin the engine. With a strong impact, the magnetic head unit will deteriorate and begins to knock, the knock informs that BMG does not see the servometer and send heads back to the parking area and this action takes place in the cycle. With a faulty block of magnetic heads, the repair of an external disk is no longer possible and it remains only to restore the data from it. BMG is replaced with a deliberately serviceable head with a similar preamp of heads, with the same head card and only after that a hard disk can be considered in the image and to engage in data recovery. The longer the hard disk works, the greater the likelihood of surface degradation.
The procedure for restoring an external removable disc for storing information is no different from recovering files on the inner hard drive - and in fact, and in another case, a qualified help of specialists is required. If it is possible to return information and data from the external portable hard disk after deleting or formatting. The data that seemed to be lost, are still in the accumulator. When recording, the data can be removed without returned and the sectors on which they are located filled with new contents. To successfully recover data from an external disk, you need to avoid recording and non-qualified interference. It is better to give a disk immediately by professionals who know everything about him than losing data or increase the cost of recovery.
Why can't do without qualified help?
External Removable Hard Drive is a complex device and repairing it requires knowledge and specialized equipment. At home, it is impossible to conduct even a quality diagnostics, on the results of which depends on the data recovery algorithm. Therefore, you should not repeat other people's mistakes and finishing the drive, which can still be restored. It is better to immediately contact professionals and without unnecessary nerves. Get back your files and hard drive. We have already entrusted our data for more than thousands of customers, we do not take money for the diagnosis in any result - you agree you to repair or refuse to repair or restore information.
If your disk starts, is determined by the computer, but when you try to access this computer, the computer freezes.
This usually means that the magnetic surface of the plates has degraded, i.e. a large number of broken sectors of Badov). The disc is trying to read the surface, repeatedly falls on the not readable surface and hangs. This is pretty frequent problemBut unfortunately in this case, the data can be considered only with the help of special equipment. Run SMART on the disk and if you see a large value of the reassigned sectors, the diagnosis is confirmed. If the data is important to contact professionals. If the data is not very important and you are ready to take a chance then try reading data using a special software Coming the damaged surface. It is best for this DDD_Rescue.
If the disk makes the beep sounds
If you hear the sound and your external disk began to squeak, it is probably the spindle trying to unwind, but for some reason it does not work. Most likely this happens for one of two reasons, but both are pretty serious. Most often it is sticking the heads to the surface of the plates. The block of magnetic heads is parked or in the center at the axis or on the ramp from the edge. Remember, the heads are in direct contact with the surface of the plates, and fly over them. Sometimes, a failure may occur during parking, for example, if the spindle stop while the head has not yet been parked, but were above the surface. Due to the fact that the surface of the plates and heads is perfectly smooth, they literally stick to each other. IN this case You must open the disk and with the help of a special tool correct the situation.
The second case is a spindle wedge. Motor with axis on which plates are installed. Pretty rarely, but sometimes the spindle encourages and it cannot rotate. This is possible, for example, with a strong impact or simply due to wear. Most often this problem is found on the old Seagate models. Two ways to solve this problem, both require the participation of professionals. Replacing the spindle or moving plates along with BMG and a board in the Donor HDD.
If your external disk is not defined or determined with the wrong size.
This means that the problem with a specific area of \u200b\u200bservice data. A few years ago, a problem was often met with Seagate 7200.11 with SD15 firmware known as the problem of the Much CCC. Google will give you many ways to solve this problem. But most of the other such problems will require special equipment and knowledge. In modern drives when outdoor hard The disk is determined by zero, it may mean damage to the translator on Seagate in particular. When damaged the translator in external or hard disk, Seagate happens to restore the full volume of user data for a very long time and this process can go to this process.
Restoration hard disks implies to bring drives to a state to be considered from them necessary information. Repair in cases where data recovery is not required, we are not engaged.
Restoration of hard drives in the presence of unreadable sectors
As a rule, if there is no periodic check of the disk to the BED blocks, their appearance manifests itself in reading errors, the disappearance of folder files. Can be displayed as unformatted or disappear logical disks, the operating system stops loading.
Restoration of hard drives in the presence of unreadable sectors is carried out using a software and hardware complex. This complex allows you to work with discs in technological modes, a multiple reading of sectors and reading with ignoring the control and cyclic code. With these operations, in many cases, it is possible to consider information from a significant part of the failure sectors.
In the case when unreadable sectors It turned out to be in the area of \u200b\u200bthe table of sections or service information file system, requires a preliminary removal of a copy for a serviceable medium. Then the data recovery passes the same as in the case of a good drive.
Restoration of hard drives with disorders in the ROM or service area
The disc is not defined in the BIOS or is determined incorrectly. May be made of noncharacteric sounds, "knocking". There are cases when the carrier is determined correctly, but with further download BIOS. gives an error message.
Recovery of the hard disk, in this case it is to restore the data of the HDD service zone or ROM. These works are carried out on the stand, in the technological modes of the drives of the drives. After that, data recovery passes as usual.
Restoring hard drives with a faulty controller
At the same time, in most cases, the disk is knocking, or is not defined in the BIOS.
The hard disk restore work is mainly concluded in replacing or repairing the controller. Sometimes it also requires flashing disk firmware. After repair, the data recovery occurs both with a serviceable drive.
Restoration of hard drives in case of faults in Hermone
This type of malfunction most often causes a knock or grind in the humbling. The exception is "sticking heads" and "wedge" of the engine, in this case the disk is not unwound. The drive is not defined or can be determined by BIOS.
When out of failure of one or more magnetic heads, or the switch (it is also located in the Hermbock), it requires an opening of the humbling and replacing the magnetic head unit with the switch to restore the hard disk.
In the case of "sticking", the Hermons and the heading "heads" in the parking area is opened. The engine jamming is eliminated by its repair or transplantation "Blinov" on a serviceable drive.
After that, data recovery is made on the complex
Probably, sooner or later it happens with everyone - once and I flew a USB hard disk.
Somewhere in a hurry and just pulled out lace From the USB socket in the laptop (as often happens).
I come to work, I connect the HDD, and it is empty ...
Of course you should not panic.
First of all, you need to remember the main rule: The smaller the manipulations you will produce with the media, the more chances to restore your information. No need to copy anything, cut, delete.
There may be various symptoms " diseases"Your media: disappear some folders / files, copy errors, the system asks to format your media, etc.
Each case, of course, it is necessary to approach individually, so it is important to have several different tools / testing programs.
I am always on my laptops, home and working PCs, portable HDD hold a folder with the main software that can be useful ever. Well, and of course there was a pair of programs to work with hard drives and software to recover data.
For example, there were such: Easeus Partition Master., Norton Partitionmagic, PartitionManager, Active File Recovery, Error Repair Professional, HDD Regenerator, HDDScan, Raxco Perfectdisk, R-Studio, Recover4All.
I walked up in Easeus Partition. Master and Norton PartitionMagic.. The first is almost lightweight and free version second.
The programs showed the presence of media, but could not determine the type of file system.
Approximate program interface:
You can, of course, simply format the carrier in the file system you need and seem to get a working hard disk again, however, I was important to keeping information there, so I left formatting, as a radical method for restoring my hard work.
Unfortunately, there are no tests of testing of all programs, but in the end, after the bustting of the programs and watch reading of various forums, I downloaded another small utility from the network - testdisk..
The interface of the program in English, but a person, at least a little solid technical English, will not understand labor.
The "Tyka" method began to pick up in this program:
1) Choose whether we need to log. I do not need. 
3) Select the type of partition table. In my case - Intel. 
4) Next, we are already moving to the menu with possible operations on our carrier. 
4.1 Analysis of the existing partition structure and search for lost sections: 
4.2 Additional section - File System Utilities: 
4.3 Disc geometry: 
4.4 and key section for us - " MBR Code". Overwrite the boot sector.
Master Boot Record is the main boot entry, the first physical sector (512 bytes size) on the hard disk.
Where came up:
Chose the desired disc - check sectors - Overwriting MBD - Overwrite the boot sector.
At the same time, it was rebooted once. The gesting disk returned to the initial working condition with all the data.
After this case, I copied this console utility to my folders with the right software and not in vain.
Soon a colleague was requested to work with a request to see the computer - stopped being loaded after the voltage jump.
My actions:
I connect it to another PC:The system sees the disk, but when trying to go to it, it writes that the disc is not formatted and offers to format it.
I tried the programs to restore remote or damaged files:
A couple of programs (R-Studio, for example) even found all folders and files, but restored their crookedly - no document was opened. At the same time, the program clearly pointed out that on the disk file system Fat.
The first thing that came to mind is most likely damaged boot sector disk (boot sector).
Left on the night with checking and correcting bad sectors HDD Regenerator program.
In the morning discovered " blue screen of death"With an inscription type:" Conflict with new equipment or software. "
I tried to cut the hard, pull out a battery from the motherboard to bring down the BIOS settings, well, and a bunch of any manipulations, including banal loading in safe mode. Nothing helped.
All as before: the system sees, but does not fit ...
Then made a number of manipulations of similar topics that did when restoring its USB-HDD and after 10 minutes the PC colleagues booted himself.
Chinese flash drive
Recently ordered from China a flash drive to 32 GB, it turned out to be some kind of defective. First, folders and files disappeared, then after formatting it stopped opening at all. I have been a sorceress with her for several days, but I can't reanimate.So far I see only " Partition Sector DOESN "T Have the Endmark 0XAA55 ".
