A window will open in which we click "Next".

Now you need to select the restore point to which you want to roll back and click "Next".

Confirmation of the restore point. Click “Finish”.

One more warning, click Yes.

A recovery preparation window will appear. Then the computer will restart and a message will appear stating that.

We are waiting for the computer to boot into safe mode. Further, all actions are almost the same as restoring from under Windows, but I'll write again, just in case :).

Click start and enter "restored ...", run the utility "System Restore".

Since I just did a system rollback, I had an item with the ability to cancel the restore. We choose "Choose another restore point" and click "Next" (you probably just need to click on).

Select the point to rollback and click "Next".

Click on the "Finish" button.

We answer “Yes” to one more warning.

The computer will restart and turn on in normal mode. Of course, if a rollback to the previous settings helped to solve your problem with the system boot.

Roll back to previous settings using a boot disk

I left this method for dessert, because it will be needed here boot disk with Windows 7. But this method has its advantages. For example, you can rollback when even safe mode does not work, in short, in the most severe cases :).

As I already wrote, you need a bootable disk with Windows 7, the article describes how to create it. Then you need to enter BIOS and boot from the installation disk.

Search will go installed systems... If you have more than one of them, then select the one you need and click "Next".

Then choose "System Restore"... Further, the whole process does not differ from the first two methods.

In the next window, click the "Finish" button and respond to the warning.

We pull out the disc from the drive, and the computer should boot in the usual way. Everything!

This is an interesting story about how to roll back the system, you can finish :). It seems that I wrote everything, I am waiting for your comments and wishes in the comments. Good luck!

Recovery is quite common in computers. Windows startup 7 after errors occurred. This can be good or bad for your operating system. Today we are going to talk about how to manage system startup recovery.

What is Recovery Tool

Windows 7 Startup Repair Tool repairs the OS. It can fix a number of problems that prevent correct running Windows... Wherein this process launches a computer scan, thereby detects the presence of problems and errors, tries to eliminate them and ensure the correct and efficient operation of your "iron friend". By default, every Windows operating system has the " Automatic recovery systems ". You can turn it off if you want. But without special knowledge of your own computer, you do not need to do such manipulations - let the machine be checked, restored and functioned normally. Although there are times when restoring Windows 7 startup is long and boring. This is already a signal to think about testing the hardware. Of course, Windows 7 startup recovery does not provide a 100% guarantee that the system will work properly - there are errors that recovery tools cannot cope with. We will talk about them further.

What recovery tools can't handle

Windows 7 Startup Repair is unable to fix some issues. As a rule, system files that have been damaged, deleted, or not delivered at all are subjected to recovery. It is not capable of greater recovery. So, it cannot eliminate equipment failure - for example, hard disk or memory incompatibility. Also, Windows 7 Startup Repair cannot protect your computer from viruses.

Recovery will not help with system installation problems either. So, if the operating system initially got up "crooked", then there will be no sense from recovery tools. Personal files (photos / videos / documents) are not subject to return and "repair". In order to save your data, you need to do archiving.

If recovery doesn't work

In order to solve problems that are not fixed by System Restore, you must find the problem. Anyway, you will see a summary of the error and some documentation on the screen. Thus, it will be possible to understand what is wrong and take appropriate action. As a rule, if recovery does not help, then you need to "fix the hardware" or reinstall Windows.

Manual bootloader repair

There are several ways: recovery Windows bootloader 7 manually, using programs, automatically and using a system rollback. Now we will talk about how to "manually" restore the system.

In order to answer the question: "Restoring the Windows 7 bootloader - what to do for manual recovery?", You need to be patient and, of course, Windows 7. Now let's proceed directly to the recovery process.

1. Customize BIOS settings so that your floppy drive is in the first place for loading and reading.
2. Insert into computer installation disk with Windows 7 and restart your device.
3. You will see the already familiar window for reinstalling the system. At the bottom left, you will see System Restore. Click on this button.
4. After that, the "System Recovery Options" window will pop up in front of you. Select the one you want to restore, click "Next".
5. Next, select "System Startup Restore" - "Command Prompt".
6. Write in the window that opens: "bootrec.exe".

Bootrec Keys

At manual method recovery after the last step, you will see a window with the so-called keys. They explain how the Windows 7 system recovery will be carried out. Now we will see which keys are responsible for what.

FixMbr - Windows 7 Compatible Master Boot Record is being written to system partition... This option is used when the master boot records are damaged or non-standard codes need to be removed from it. The existing partition table is not overwritten. Windows 7 startup recovery can bother you for a long time because of these entries, but with FixMbr you will get rid of the problem once and for all.

FixBoot - a new boot sector compatible with your operating system is written to the system partition. Use given key at:

Replacement boot sector non-standard options;

Damage to the boot sector;

If a previous version of Windows was running.

After you select the required Windows 7 startup repair tool, write it and press Enter. Wait for the process to complete. Done - Windows 7 bootloader is working again and restoring the system. In this case, the boot will occur, the restoration of the system start will be in good condition.

Recovery programs

In order to "return" the system startup, you can use various Windows programs; Windows 7 startup will be restored almost automatically. This method is great when you don't have the original Windows disk at hand. What programs can be used to restore?

Heren's Boot CD

As a rule, the salvation in the absence of the original Windows 7 disk will be the so-called liveCD, which can be written anywhere: even to a disk, at least to a USB flash drive. There are many such programs. The easiest and most convenient way is to use Hiren's Boot CD. There are a lot of various utilities on this disk. Win recovery dows, but today we will focus on the most convenient and common ones. Before starting work, you need to burn a liveCD, and then load it through the BIOS. When this is done, it will be possible to move on to the next steps.

Option 1 - Paragon HD Manager

One of the most popular system recovery utilities is Paragon Hard Disk Manager. In order to restore the Windows 7 system through it, you must:

Option 2 - MBRFix

Another convenient, fast and popular system recovery utility is MBRFix. It is not much different from the previous one. Is that your desire. You won't have to wait long for the Windows 7 system recovery to work. It is enough to do the following:

1. Select "mini Windows XP" when starting the liveCD.
2. In the menu that opens, find and select "Partition / Boot / MBR" - "Commandline" - "MBRFix".
3. To repair the bootloader, enter the following entry: MBRFix.exe / drive 0 fixmbr / win7 / yes.
4. Wait for the process to complete and restart your computer.

Recovery using the command line. This is another good and high-quality way to restore your system. In order to use the command line as a Windows 7 recovery tool, you need:

1. Run on a computer. Don't forget to select the command line option.
2. Sign in.
3. Register rstrui.exe in the command line.
4. Press Enter and wait for the processes to complete.

Disable recovery

It is possible with Windows help 7 disable system startup restore. In order to turn off the annoying Windows recovery 7 when you start your computer, you need to:

1. Go to "Start" - "Control Panel" - "System" - "System Protection".
2. Find the "Properties" window and open the "System Protection" tab.
3. In the "Protection Settings" find and select the drive on which you want to disable System Restore, click "Configure".
4. In "System protection for ..." in "Settings" check the box on "Disable system protection".
5. Click OK. So simple and fast ways you can carry out various manipulations with system recovery. Do not forget that Windows 7 recovery can be done using a system rollback. In this case, your personal data will not be damaged. It is possible to roll back the system only if it can start itself, that is, if the Windows 7 bootloader recovery is always enabled, which constantly checks for errors, but the operating system is working normally. It will be necessary to "roll back" the OS to the date when there were no problems. Recovers Windows using standard set included in the package. But if your computer was prone to some really unpleasant errors, then some problems may arise in the process that will not particularly affect the quality of the system's operation - it will simply be unusual and inconvenient for you to work at the computer. Most frequent problem is the disappearance language bar in system.

Language bar and recovery

The language bar is something that is visible and familiar to everyone. As a rule, there is a panel that shows the keyboard layout and allows you to switch it. Sometimes it happens that she disappears. Then it becomes necessary to restore the launch and operation of the language bar in Windows 7. The easiest way is to turn to the built-in recovery tools. Why exactly you have and for what reasons the language panel is "covered" - it is rather difficult to judge, since there can be a huge number of them. Nevertheless, everything is easy and simple to fix. Let's start fixing the problem with this panel. There are two methods.

Method 1 - "folk"

1. Press Win + r and run intl.cpl. You can also use: "Start" - "Control Panel" - "Regional and Language Options".
2. Go to "Languages ​​and Keyboards".
3. Open the Change Keyboard menu.
4. Next, you need to select the language bar in the "Languages ​​and text input services" box.
5. Check "Pinned to taskbar" and "Show test marks in language bar".
6. Next, you need to accept the changes and click on Ok.

The language bar should now appear.

Method 2 - "advanced"

1. Press Win + R and type regedit.
2. Find a tab in the registry:

HKEY_LOCAL_MACHINE \ Software \ Microsoft \ Windows \ CurrentVersion \ Run

3. Check CTFMon for the presence of the appropriate "program". If it is not there, create it.

4. Right-click Run and "create string parameter".

5. Assign a name to CTFMon and by right-clicking on it, click on "change".

6. Write down: "C: \ Windows \ system32 \ ctfmon.exe".

7. Click OK.

Will fall into place, allotted by Windows 7. Which method of returning the panel to its place is right for you - decide for yourself. It all depends only on your skills and desires. But do not forget that a computer can be "repaired" to such an extent that it will eventually stop working altogether. Careful with system files... It's good if you have several computers - on one of them you can always see how to fix this or that error in the system.

In extreme cases, it only saves complete reinstallation systems without saving data.

It is carried out using the installation Windows disks... Before completely "demolishing" the system, make sure that all recovery methods are not working. If there is no other way out, insert the disc into the drive, configure the BIOS to boot from the disc and get to work. Very often, if the bootloader fails, there may be installation problems new version Windows or time out. Try to carefully read everything that the installer writes. Be patient - any computer requires proper, often very painstaking care.

Such simple methods you can tidy up your system. launching Windows 7 and the language bar is not that difficult. If you doubt whether you can do everything correctly on your own, call the master. He will definitely be able to tell you the correct and high-quality way to correct the errors that have arisen. Try to carry out all the necessary manipulations to protect and scan your computer on time and regularly. Happy renovation!

When working in Windows 7 OS, serious errors may occur, after which the operating system simply stops starting in normal mode... However, this is not yet a reason to get out of the dusty corner of the boot Windows disk to reinstall it. Vin 7 has in its arsenal the Recovery Environment - a powerful tool that will help restore the previous state of the operating system, avoiding the loss of data on your PC or laptop. In addition, other tools are available to users to reanimate Win 7.

Windows 7 system recovery methods

You can reanimate Win 7:

• using a restore point;
• using safe mode;
• across command line;
• through the Recovery Environment;
• using a disk with an image of Vin 7;
• using the Win recovery disc.

Rollback to a restore point from under Windows

If the OS boots normally, but you want to restore it to a previous state using a restore point, do the following:

Rolling back the operating system to a restore point will allow you to remove the software that caused the PC malfunction, undo unwanted changes, and revert back to the state of the operating system when everything was working correctly and correctly loaded. Last but not least, no data loss will occur, and all your recent documents will remain in place. Some files may remain duplicated by slightly changing their name. You can delete unnecessary copies of these files yourself.

Note: This process is completely reversible. If necessary, it can be canceled and restored. Windows system 7 using a different point.

Roll back the operating system in safe mode

This Windows 7 system recovery method is almost identical to the previous one. It is used in situations where Win does not start in normal mode:

Launching Win 7 Recovery from Command Prompt

In some cases, when Win 7 does not start in any modes other than safe, the following method helps: restore the Windows 7 system using the command line. You can do it like this:

Rollback OS state through Recovery Environment

Windows 7 Recovery Environment includes 5 tools to offer the PC user different ways troubleshoot problems related to the health of a computer running Win 7. It is created in the hidden partition automatically. This happens when you install Vin 7, be it "Maximum" or any other version.

To restore Windows 7 using this method, do the following:

Note: the first step is to start the OS with the last good configuration.

The operating system automatically remembers the parameters of the last successful start of the PC in normal mode and applies them when this option is selected. As a result, you can quickly regain access to the system without the slightest loss of data. If this method helps the PC user to solve the problem, the question "How to roll back Windows 7?" will immediately stop worrying you.

Recovering Vin 7 using an image disc

This method of reanimating Windows will allow the operating system to return to its lost performance, even if it categorically refuses to start in safe mode. You will need a bootable DVD with your Win 7 version installed... If there is no OS image on your PC, create it yourself. To do this, go to the control panel and select "Archiving computer data". Then select the item indicated in the screenshot below and follow the instructions.

Recover Win 7 with a recovery disc

If, by pressing the F8 button, you do not find the line "Troubleshooting computer problems" in the list, restoring Windows 7 using a system recovery disc will help. This happens if the user accidentally deletes the partition of the recovery environment., which is located in the Recovery directory of the system local disk... Do you think you just have to remove Vin 7 and reinstall it? This is not necessary - changes can be undone without the need to reinstall the OS.

In many cases, there is a vital need to restore operating system, either this is due to a problem with the system itself, or you just need to find an important file. And we start looking for an earlier recovery point. It was not so! We press! It doesn't work! What to do here?

Today we will analyze several examples of how to solve this problem.

Solution number 1.

It is necessary to check the protection of the system, whether it is enabled or disabled. Our actions:
- Start → Computer → right mouse button, from the menu → Properties:

In the dialog box -> Protection options -> select with the left mouse button desired disk→ click Configure (in the list of disks we see in front of each whether protection is enabled or not, by default protection is enabled only on system disk the operating system itself):

In the next dialog box, in the Recovery Options, we put an end to the Restore system settings and previous versions files. Click OK:

Enter a description and click Create:

A restore point is being created:

And its completion. Click Close:

Solution number 2.

Let's consider more complex cases.

Case 2.1. There is no System Protection tab in Computer → Properties, or it is there, but errors pop up.

Most likely, in this case, the operating system is damaged. Perhaps, new system put on the old one. Our actions:
- Log in to the system with administrator rights.
- → → right mouse button, from the menu →:

In the dialog box that opens, select Services → Microsoft Software Shadow Copy Provider → right mouse button Properties:

We check that the service is either working or exposed Manually:

Press the keys (open the command line), type sfc / scannow, we press, thereby we will check Windows 7 for errors:

The check is in progress and the window closes itself:

Case 2.2. In Computer → Properties → System protection, system protection is disabled, the Configure and Create buttons are inactive.

After the above actions, press the keys (open the command line), run the command on behalf of the administrator gpedit.msc, click:

In the Local Editor dialog box group policy→ Computer configuration → Administrative templates → System → systems check the lines Disable configuration and Disable system restore. The status should be Not set.

On the selected line, right-click on context menu All tasks -> Edit:

In the next "Disable Configuration" dialog box, select the Not configured option. Click OK

We close all windows. We reboot the computer.

So, we looked at several options for fixing system startup. If, of course, nothing helps from this, then you can try the option of restoring the OS from the original disk. But more on that in another article.
Good luck with your work!

I would divide the system recovery methods into the following:
1 By loading the last known good configuration
2 Using the "System Restore" mechanism normally
3 Using the system restore mechanism out of place (through safe mode or the original Windows 7 installation disc)
4 Using a previously created system backup.

1) Suppose you encountered a problem in Windows 7 and wanted to restore the system's performance, the simplest thing you can do is boot into Safe Mode and load the last successful configuration, for this, when loading the operating system, press the key "F8" and select Last Known Good Configuration, press "Enter".

Last Known Good Configuration is a Recovery option designed to boot the computer using the last correctly working system settings. Booting in Last Known Good Configuration mode restores information system registry and driver settings that were used when the system was last successfully booted. Use Last Known Good Configuration mode when Windows 7 cannot boot normally as a result of incorrect changes.

2) If the first method does not work or does not help, you can restore the Windows 7 system using the " System recovery"The principle of operation of this method of recovery is quite simple, recovery is due to created points recovery. A restore point captures the state of the system at a specific point in time. Restore points are created automatically by the system, but you can also create them manually (This is the topic of this article). There are several ways to start System Restore - The first way, you need to click "Start" and write in the search bar "System Restore", a menu will appear at the top "System Restore" click on it with the mouse. The second way is to go along the way "Start-Control Panel - Recovery - Start System Restore"... A window will open "System Restore", press "Further", you will see all possible restore points to which you can return / "roll back" if you click on the button Find Affected Programs, you can see which programs will be affected by system recovery (I recommend choosing recovery two, three days before the problem with the system). After selecting the date, click "Further".

Confirm the restore point by clicking "Ready"

Then a message will appear stating that System Restore cannot be interrupted, click "Yes", after that the process of recovery and reboot of the system will begin.

After rebooting, if the recovery is successful, a window will appear.

3) If you have suffered from a virus and you are not able to start the system restore using the above method, then you can "roll back" the system using Safe Mode or using the operating system disk:

We go into safe mode (by pressing "F8" at the very beginning of the system boot) and select "Troubleshooting computer problems", a window will open

- Insert the original installation disk with the operating system (it must match yours), boot from this disk (for this, change the boot from the hard disk to boot from CD / DWD in BIOS). Select the language, then in the window « Installing Windows» , choose "Recoverysystems ".

This will open a window Windows 7 System Recovery Options.

So, no matter which of the methods you used, the result is one - there is a window in front of you Windows 7 System Recovery Options,

I propose to analyze a little the capabilities of this window.

Launch recovery- analysis of malfunctions interfering with normal booting Windows 7 and their further correction for normal loading and functioning of the operating system.

System Restore- for what this article was written, with the help of this function we can use a restore point to return the system to an earlier period of time when there were no problems.

System image recovery- this tool allows you to restore the system from a backup. More details about this method are described in 4 recovery method.

Windows Memory Diagnostics- checks the system memory for errors.

Command line- allows you to load the command line and with it you can delete files that interfere with the boot of Windows 7.

Click on "System Restore", after that a window appears stating that "Rollback" system can fix the problem ... click « Further", select the required restore point.

After that, we agree with everything proposed, including the reboot and the result of all these actions, when loading Windows 7, we see the window

4) Restore using a previously made backup, creating a backup is described in more detail in the article. Connect USB device backup storage, press "Start" - "Control Panel" - "Recovery"... If the system does not start and there is no way to boot the system, you need to complete the third paragraph of the article, just select System image recovery.

In the window that opens, select " Advanced recovery methods".

Then a window will appear asking you to reboot the system, click " Restart".

After restarting, you must specify the system recovery settings. I recommend leaving everything as default and just clicking " Further".

In the next step, the system will find the system archive itself.

Next, you can specify additional parameters.

After that, confirm your choice and click " Ready".

We confirm the system recovery, press " Yes".

If all the above methods did not help you, in this case, it remains only to return the Windows system to the factory settings, i.e. lose all your data and programs. I'll make a reservation right away that this method is fine if you have a hidden recovery volume on your hard drive, it must be provided from the factory. You can see it if you right-click on the shortcut "A computer" and choose « Management - Management disks "

Below are the hotkeys for restoring laptop factory settings:

• Acer- hold down the Alt + F10 key combination
• Samsung- F4;
• Dell inspiron- when the dell.com splash screen appears, you need to type the key combination Ctrl + F11;
• HP Pavilion- when turning on, hold F11;
• Packard bell- F10;
• Rover- when starting the laptop, hold down and hold Alt;
• ASUS- when the ASUS logo appears, press F9;
• Sony vaio - at startup, press F10;
• MSI- press when starting F3;
• Fujitsu Siemens- having enabled, press F8;
• Lg- F11;
• Lenovo ThinkPad - F11;
• Toshiba- F8.

I hope this article has saved you from the question. How to restore a Windows 7 system and helped bring your operating system back to stable performance.