As in win 10 recovery point. Why is it important

And so, if suddenly your operating system has become unstable, or something in it stopped working, the computer began to hang or chaotically reboot, then do not rush to reinstall Windows. The first thing you can attempt to roll back to the point in time, when your Windows has worked fine. Users, of course, rarely create recovery points until they encounter problems. Therefore, often it remains to hope for automatically created Restore Point.

Restoring Windows 10 to the operating status using the system Restore function

I repeat once again: the rollback is possible only if you have previously created recovery points. Do the following steps:

Launch Control Panel:

Select Restore:

After pressing is ready to start recovery.

Now you just need to wait a few minutes (usually, 10 minutes) until Windows rolls back the computer to the previously saved point. First you will see a window that reports that the rollback process is launched:

Then see a message on a blue background:

Upon completion of the PC procedure, you must restart and on the screen you will see the message "Computer successfully restored":

Method 2: Rollback of Windows 10 to the recovery point if Windows does not start

If the computer stopped downloading and you do not have any image created by third-party like Aomei Backupper, you can still try to take advantage of the system recovery. I will say right away - it does not always work, however, however, it is worth trying. To do this, you will need to do these steps:

We hope that this manual helped you roll back PC until the time when the operating system worked fine.

This article will tell in detail how to create a point. windows restoration 10, find a list of these points and restore the system from the desired one.

The most common way to restore wINDOVS systems 10 is the use of the system recovery point. In this article, we will look at how to create a recovery point, customize and restore Windows 10.

To go to the settings recovery WINDOVS 10 Perform actions: "This computer", then "properties" and "system protection". The "System Protection" section contains the buttons that are needed to create recovery points, return to the past recovery points and settings.

First you need to pay attention, the system recovery is enabled or not. When you have several disks, most likely they are disabled, and the system disk is often turned on. You need to go to the system recovery settings, then click on the "Configure" button.

Increase

As can be seen from the screenshot, after window updates 10 There are no checkpoints, so consider the process of creating it. To create a recovery point, you need to "enable system protection", for which you need to click on the "Configure" button and select "Running System Protection".

Then you should move the slider and specify which amount of disk space should be applied. Click on "Apply" and "OK".

Increase

Create a WINDOVS 10 recovery point

This operation You can perform by switching to the "System Protection" section. The process of creating a recovery point from clicking on "Starting", then select System and System Protection.

Increase

Then click on the "Create" key and specify the name of the new item. Now we choose "Create" again. After a couple of seconds, the process will automatically be completed.

Increase

After completing this procedure, the computer will be displayed on the computer's hard drive, data that allows you to roll back OS back. If required, you can cancel the changes with system files that are critical for the normal functioning of Windows 10. This feature It is extremely useful during the incorrect operation of the system due to the installation of some other IT product.

Increase

The recovery points created are located in the System Volume Information folder, which is rooted by the system protection of the disks and their sections. The PC user will not have access to them.

We restore Windows 10 with the previously created point

To return the computer to return to the state, you must apply the created recovery point in Windows 10. Run the "System Protection" menu and click "Restore".

Increase

A window will open where you select "System Restore" and "Next". In our case there are 2-point recovery points. Often, the latest created point is selected. If it does not lead to the desired result, you should try other recovery points. After selecting the screen recovery point, click "Next".

Increase

Then the system will notify how to reboot the computer. You just need to click "ready" and expect the end of the reducing process that happens in automatic mode. You do not need any actions from users, you only need to wait for rebooting and displaying the window about the successful restoration of the system.

Increase

Place storage of recovery points

In System Volume Information, you can find the available recovery points. They are found in the root of all partitions of the disks, where the protection of the system is enabled. This system directory cannot be removed, but you can reduce its volume.

The folder is hidden by default. You can see it with Total Commander. Or other powerful file managers, but the catalog will not be able to open without additional rights. Because of this we will not use file managers, and just set up to system folder access.

Increase

Now open the "computer" and go to the C drive S. There will be a pale System Volume Folder. If you try to open it, a message will appear that the user is not right. You must remove these prohibitions.

With the right mouse button on System VOLUME INFORMATION, then open properties.
Go to the "Security" menu, where you click "Advanced".

Increase

Click on "Continue", to view the properties of the folder with the permission of the administrator. You must be in the system authorized under the administrator entry.

After the continuous operation of the operating system, various may occur system errorsThis is due to continuous operation, moving, deleting files and many other reasons. Therefore, to restore the performance of the system in Windows 10, "recovery points" apply, now let's talk about how to create them, and how to roll back Windows to one of these points.

Standard Windows 10 is that recovery points are created after installing updates, as well as after their removal. In addition, the points are created when updating drivers and applications, also if you decide to delete them, the system will also create a recovery point.

It should be understood that the rollback to the recovery point is not complete windows change 10 BE standard settings. Recovery points contain only information about changing the most important files.

Important! In addition to the automatically generated recovery points, the user can also create and delete recovery points.

Roll back Windows 10 to the recovery point

Return the system to one of the points is quite simple, we will examine two options:

Through the diagnostic tool.
Using the command line.

Both variants are very simple, and will lead to the desired result.

And so, we will analyze the first option:

Go to the "Control Panel", click on "Restore", you will see the "Run System Recovery" button there, click.
Here everything is simple, press "Next", and the recovery points will appear before, it can be either one, or there will be several. You will offer to choose the recommended recovery point to seem other points (by the user created and automatically) check the box in the "Show other recovery points" field.
By selecting the recovery point, click "Next" and then "Finish". Once the computer automatically restarts Windows to notify the successful system restoration.

Command line

Now restore the system using the command line, it may be useful when Windows 10 works in safe mode with command line support. In addition, it is very simple and fast.

Open the "Start" menu by holding the SHIFT key click on the "Restart" point.
Click to "Search and Troubleshooting", then open "Advanced Parameters".
Open the "Download Settings" item, in the next window, click "Reboot".
In the window that opens, select "Enable safe mode With command line support. "
IN command line Enter "rstrui.exe", click "Enter", all now select the desired recovery point and run it.

How to create a recovery point

On a note! In addition to the automatic recovery points, the user will also be needed. This will always be able to roll back the system to the desired settings, not afraid for the various data.

To create a recovery point you need:

Go to the "Control Panel", open the "Restore" section, click on the "System Recovery Setup".
In the window that opens, first familiarize yourself with the information, and then click on the "Create" button.
Come up with a description to a new recovery point, try to write to you to be well clear why you created a recovery point, do not forget the time and date will be added automatically after creating a point. Everything, inventing the description, press the "Create" button.
After a short time, the recovery point will be created, and the system will notify you as a "recovery point has been successfully created."

Everything, now when you go to "Restoring System", there will be another new recovery point, which you can easily find on the specified description.

Customize automatic creation of recovery points

In order for the computer to be always a spare option, and you did not have to constantly create new recovery points, configure automatic creation of points, it will be much easier and more convenient.

And so to configure the instructions:

Go to the "Control Panel".
Go to the "Administration" section, go to the job scheduler.
On the left, click on the "job scheduler library", select "Microsoft".
Then "Windows" and there "System Restore".
In the middle of the top, the "SR" file will appear, click on it with right mouse button and click on "Properties".
Go to the Triggers tab and click "Create", there you can set all the necessary parameters for new recovery points. Read more, and configure the highest possible and convenient schedule for creating automatic recovery points.

Do not forget that windows work It can slow down due to a plurality of factors, and to eliminate errors necessarily hold the trump card, in the form of a suitable recovery point.

Video - How to create, delete a recovery point or roll back Windows 10 system

The most common way to restore the system is to use the system recovery point. In this article we will talk about how to create a recovery point, configure and how to roll back Windows 10 with a point.

Yes, Windows 10 - the system is much more reliable than all its predecessors: we have already forgotten what " blue screen Deaths, "and familiar a few years ago," freezes "happen much less often. But the world is imperfect, and our computer with Windows on board - especially.

Special service that follows the computer and creates control points, thanks to which we can return to an earlier, workable conditionIf suddenly the computer began to work as wrong. Of course, there are no spending on hardware failures, but if we have problems with programs, drivers, computer failures after upgrading or installation, etc. In all such cases, it will help us to restore Windows 10 with the help of the previously created control point.

After we perform rollback to the previous point, we will restore all system files that we had at the time of creating a point. At the same time, for the safety of personal data, documents, the photos are not worried about, this data when recovering Windows 10 will not be affected.

Setting up system recovery

Go to the settings. This computer \u003e\u003e Properties \u003e\u003e System Protection. In the "System Protection" tab, and there are the same buttons to create recovery points, to return to previous recovery points and settings. First of all, you need to pay attention, the system recovery is enabled or not. If you have several disks, they are rather disabled, and the system disk is usually turned on. Go to the settings and click on the "Configure" button.

As you can see, I have after windows updates 10 There is no one control point and now I will create it with you. To create a point, you need to "enable system protection" and for this, click the "Configure" button, select "Enable System Protection". Next, moving the slider, specify how many disk space can be used. Click "Apply" \u003e\u003e "OK".

Click " Create"To create a system recovery point and in the window We enter the description for convenience of finding the point that we need. Once again," Create "to forcibly create control point Operating system parameters.

The Windows 10 recovery control point is successful and now I can roll back the system at any time, to just that the stored state without losing any important data.

How to restore Windows 10 to the recovery point

In order to return the computer to an early state, we will use the previously created recovery point in Windows 10. We open the "System Protection" window already familiar to us and click the Restore button.

In the opened window "Restore System" \u003e\u003e "Next." In my case there are two points, and your may be one or more. Typically, the last created recovery point is selected if the last point has not led to the desired result, then try other recovery points to restore the system. And so, the recovery point is chosen, press "Next".

Further the system warns us that the computer will be rebooted, so we simply press the "Finish" button and wait for the end of the process. The operation occurs completely in automatic mode, no action is required of us, only you need to wait until the computer is rebooted, and the window will not appear with the information on the successful system restoration.

Now we are fully prepared to return the computer into an efficient state with the previously created recovery points in Windows 10.

How to remove the recovery point

Remove the recovery points created earlier, you can also in the System Protection Settings window. To do this, select the disk, click the "Configure" button \u003e\u003e Delete. " Please note that all recovery points for the selected disk are deleted.

This article shows actions with which you can create a recovery point in the Windows 10 operating system.

The "recovery point" is designed to cancel unwanted changes in the system. Using the recovery point, you can restore system files and computer parameters at the time of creating the selected recovery point.

If the system protection function is enabled, then the recovery points are created automatically when the computer detects changes, for example, when installing any application or driver, as well as when installing updates. You can also create a recovery point at any time, for example, before changing the change in the registry or before changing important settings Computer.

Creating and using recovery points occurs with the system utility System Restore (System Restore), the executable utility file is located in the System32 folder of the Windows system directory and has the name rstrui.exe

Restoring the system creates backups System files of certain extensions (.exe, .dll, etc.) and saves them for further recovery and use. Also create backup copies of the registry and most drivers. The system restores in most cases can eliminate the problems that slow down or block the computer.

Setting up system recovery

By default, in the operating system, the system protection function is disabled and therefore it is impossible to create a recovery point. To create a recovery point, you need to enable the system protection function, for this you need to open the System Properties window on the System Protection tab. Actually, there you can not only include or disable system protection, but also create or delete recovery points, as well as run the system recovery.

To open the System Properties window on the System Protection tab, there are a lot of ways, consider some of them.

You can use the search in Windows to do this search on request.
Creating a recovery point or SystemPropertiesProtection and select the appropriate result.

Use a dialog box called by pressing + r, in which enter the SystemPropertiesProtection or copy and paste:

rundll32.exe shell32.dll, Control_rundll Sysdm.cpl, 4

As a result, the "System Properties" window opens on the System Protection tab. Recovery points are created for all disks for which the system protection is enabled. For example, if for system Disc C protection is disabled, you can turn it on by selecting this disk and pressing the configure button ...

After that, select Enable system protection And specify the number of space that you would like to highlight to create recovery points. The greater the place large quantity Points can be stored, and as the space is filling out the old recovery points will be removed automatically. After the changes made, click OK.

In order to create a system recovery point in the System Properties window on the System Protection tab, click the Create ...

In the next window, enter the description for created Points Recovery.

In this field you can write any text. The date and time of creating this recovery point will be added automatically.

After entering the description, click the Create button.

The process of creating the Windows 10 operating system recovery point will begin.

After the process of creating a recovery point is completed, the system will inform you that the recovery point is created successfully.

The recovery point is created and now the system contains information that will allow you to cancel the last changes made in critical system files Windows 10, if after installing programs, drivers or other actions, the operating system will not work stably.

Created recovery points are stored in a hidden System VOLUME INFORMATION system folder in the root of the respective disks or partitions, but there is no access to this folder by default.

How to remove recovery points

You can delete the available recovery points, to do this again, open the "System Properties" window on the System Protection tab, select the disk and click the Configure button ...

Then click the Delete button

The system will warn you about what you will not be able to cancel unwanted systems On this disk and that all the recovery points will be removed on this disk, agree and click the Continue button