Almost all large manufacturers Smartphones and tablets with the Android operating system offer users softwareWith which you can manage them from a computer. SAMSUNG KIES, LG, PC Suite, HTC Sync is very good, but they have one important drawback - they all work with only one manufacturer devices. If the user has several Android devices different marksYou have to work with several programs, and this is not always convenient.

Fortunately, there are many universal programs for managing gadgets on Android. They recognize almost any Android devices, make it possible to work with several devices at the same time, as well as often functionality of branded utilities. One such program has a phone manager for Windows "MyPhoneExplorer".

Installing and configuring MyPhoneExplorer

To start using the application, you need to download from the official site and install a client for a computer, as well as install the Android application with Play Market.

You can connect to a computer USB cable, Wi-Fi or Bluetooth.

Attention! The ability to broadcast the phone screen is available only when the USB cable is connected.

Connection via USB cable

Make sure that your phone debug drivers are installed (ADB drivers are usually installed during the installation of branded on your phone, but you can find on the Internet separately for a specific model).

Make sure that the phone includes USB debugging ("Settings\u003e Applications\u003e Development\u003e USB Debugging for Android 2+ or" Settings\u003e for Developers\u003e USB Debugging "for Android 4+).

In Android 4.2.2 and the newer you need to first unlock the USB debug option (Settings\u003e About Phone\u003e Assembly\u003e Touch 7 times).

Connect the phone cable with a laptop and run the client application for MYPhoneExplorer PC. Click "File\u003e Settings" and in the "Connection via ..." group Set the switch to the "USB cable" position and click on the "OK" button.

In the Main Window "MyPhoneExplorer", click "File\u003e Connection".

Video:

Wi-Fi connection

Make sure that Wi-Fi is enabled on the phone, and the computer and the phone are connected to the same network (router). Run in the phone "MyPhoneExplorer Client". It is advisable to configure WiFi-Pin code to protect against unauthorized access (works with MyPhoneExplorer 1.8.1 and above).

Run the client application for PC. Make sure the MyPhoneExplorer is not blocked windows Firewall. Click "File\u003e Settings" and in the "Connection via ..." group Put the switch to the "Wi-Fi" position and click on the "OK" button.

In the Main Window "MyPhoneExplorer", click "File\u003e Connection".

Video:

Connection via Bluetooth

Make sure Bluetooth is on the phone, as well as the phone is configured in a pair of PC. Before configuring a pair, configure in phone bluetooth So that the phone is available for detection. During the configuration setting the branded utility of your Bluetooth adapter, if it is provided manual settingVibrate the "MyPhoneExplorer" service.

After pairing, find out the CM port through which the phone is connected to the laptop.

In the "MyPhoneExplorer" settings, select "Bluetooth" and specify the COM port number provided by the utility of your Bluetooth adapter. Click on the "OK" button.

In the Main Window "MyPhoneExplorer", click "File\u003e Connection".

Video:

Broadcast phone screen on computer

After the connection is set, you can synchronize the contents of the device with a computer. To display the phone screen to the computer, press: "Miscellaneous\u003e Phone Keyboard / Download Screenshot".

A window opens with a mobile screen screen. If the phone screen does not appear, try it. Activate the "Update Automatically" checkbox so that everything happens on the phone screen is automatically displayed on the computer.

The funny option "Show mouse cursor in the phone" shows the computer mouse cursor directly on the phone screen, though it is suspended its transfer to the computer ...

If you do not use the phone for a few minutes and he fell asleep, you can wake it up with the "Wake up device" button (green button at the top of the window).

Buttons at the bottom of the window duplicate the system buttons of the phone: "Menu", "home" and "back".

Work mouse (instead of finger) in phone

Touch with your finger (tap) - click left mouse button;

Slide a finger on the glass - clamp the left mouse key to spend the cursor in the desired side release the key;

Long tap - clamp the left mouse left for a second.

Other features of MyPhoneExplorer

The program interface is available for viewing and editing all the basic data of the smartphone. Using the built-in file Manager You can view all the files, perform basic operations with them (copying, transferring, deleting, creating folders). It is possible to view files, both on the memory card and on internal memory Devices

You can also view the list of available applications, get information about the installation date and size that the application takes. Export and application installation options are available.

Contacts and SMS messages

Using "MyPhoneExplorer" you can add / delete contacts and even make a call directly from the program. In addition, it is implemented synchronization, import and export of contacts. To display calls, there is a section in which outgoing, accepted and missed calls are separately shown. Text messages divided into sent, transmitted, drafts and saved. With the help of "MyPhoneExplorer", you can create an SMS message archive and save to a computer.

Organizer

Convenient calendar interface: from "MyPhoneExplorer" you can add new events, notes, set reminders (their list is shown in a separate section). Android application has widgets allowing you to display these notes on the desktop phone.

Information about the phone

MyPhoneExplorer is also an information utility. It can view information about the smartphone model, processor, firmware, battery degree, its temperature, voltage (see the first picture of the article), as well as the volume of free and occupied memory.

Today I want to tell about interesting, in my opinion, the program MYPHONEEXPLORER 1.8.0.. I have already mentioned that with its help you can create screenshots of a mobile phone desktop, but the program has a number of others. useful featureswhich and I am going to tell you.

List of supported models:

Download MyPhoneExplorer 1.8.0 from the official site (5.8 MB).

Update: At the office Website version 1.8.0 / 1.8.1 was replaced with a new release, version 1.8.2.

When installing, choose Russian. To install a full version, do not put the "Portable Installation" checkbox.

We do not need anything too much.

Connect your mobile phone using a DATA cable to a PC ( tLF mode) And run the program. If the phone has not been determined by the PC, it means that the driver is not installed for your model.

Clicking on the icon will occur synchronization with mobile phone. Next you need to choose "Phone Sony Ericsson. With a modem interface "and choose a name for an identification phone, for me for example," My K310i ".

After that, in the respective menu items, the information stored in the phone's memory will be displayed.

In principle, everything is simple and understandable, so I will talk about the main chips of MyPhoneExplorer "a.

Creating a backup data
Go to "Miscellaneous - Create a backup of the data". After that, you need to select a place to store a small backup file "a.

Information about specifications Your model
In the "Advanced" section, go to the "Monitor". The following information is available:

• Battery temperature
• Battery voltage
• output current
• Charge voltage
• Temperature
• Signal level
• Model
• Firmware
• LAC / Cell-ID
• Provider

Screen keyboard

A comfortable thing when sets out any navigation keys, most often the joystick. So you can get to any section of the phone. You can also take a screen shot.

Export a list of contacts
Miscellaneous tab - "Export List". Export to Microsoft Exel, Word, OpenOffice, HTML page is available.

Synchronization hours via the Internet
This item is on the "Miscellaneous" tab.

With this problem at least once, but everyone faces: you connect your smartphone or tablet to a computer by means uSB cableBut besides charging, nothing happens. The computer does not see the phone or defines it as an unknown device. The situation is common, but ambiguous, and the reasons for which it occurs is quite a lot. Today we will understand what causes such malfunctions and how to deal with them.

To the situation when the PC does not recognize the mobile device connected to it, drive software and hardware failures:

• No device driver in the PC operating system.
• Mind of device model driver.
• The absence in the USB driver system or fails to work.
• Connecting a cable that is unsuitable for data transmission or damaged.
• Malfunction of USB sockets (both on a computer and on the phone), a group of sockets or a USB controller on a PC.
• Fault of something from computer equipment, static electricity blocking.
• Error in the system settings of the phone.
• Blocking access to the phone with protective programs running on the PC (including with a viral infection of the gadget).
• The application will fail with which the phone and PC synchronization is satisfied (if you use).

In the case of software problems, the computer, as a rule, does not display the contents of the phone's memory, but the device is loaded normally when connected to it. If the problem arose due to a physical malfunction, charging most often also does not go, but there are exceptions when only data transmission lines do not work.

Outline possible causes Helps the analysis of the previous situation - what happened before the problem arose. For example:

• You reinstalled operating system On the computer or deleted part of the drivers (the reason is in the absence necessary driver).
• The phone (tablet) ceased to be determined after the firmware, cleaning viruses, delete applications, optimization and other manipulations from the OS (failure in the operation of the mobile device operating system).
• The device was subjected mechanical exposure (The USB-jack is damaged) or has been repaired (after replacing parts you need the driver of another version or the fault is not completely eliminated).
• You use a USB cable that previously never connected the phone to a computer (the cable is intended only for charging or spoiled), etc.

Quickly determine the culprit problem

Tracking causal relationship greatly facilitates localization of the problem, but about half of the cases it does not precede anything concrete. If you have this way, the following actions will help determine where the failure occurs - in a mobile device, PC or USB cable.

• Strain the cable in the connectors area (in these places there are most often formed by chances) and watch if the phone will not determine (tablet) in the conductor or computer device manager. Or connect the devices to others, knowingly working and suitable for data transfer cable.
• Connect the phone to another computer, as well as another mobile device to this PC. If the phone is not determined anywhere, the problem is definitely in it. The same in the case of a computer.
• If the reason is presumably in the computer, check the phone in all USB jacks, perhaps the problem in one or more of them (for example, only in the front group).

If you concluded that the source of the problem is the cable, just replace it. What to do in other cases, read on.

The culprit of the failure is the phone. What to do?

If the diagnostics explicitly indicate a problem with a mobile device, follow the steps below. After each step, check whether the problem is eliminated. If not, go to the next.

• Restart the device.
• Connect the phone to the computer. After connecting, slide down the menu curtain fast settings And make sure that the "Connect as" list is not marked with "only charging", as well as the "camera" or "media device". Select the "USB drive" option.

• Open system settings Android (in older versions - "Parameters"). Go to section " Wireless networks" Turn on the modem mode. Or vice versa, if it is turned on - turn off. In some Android editions, this parameter is controlled not only by the modem, but also the connection of the gadget to the PC as a drive.

• Experiment with the transfer of the device to USB debug mode. Open the "System" and "for Developers" section in the parameters. Remove either check the box near the Usb Debug item.

• Disconnect the phone from the computer, turn off and remove the battery from it (of course, if it is removable). After 5 minutes, install the battery in place, turn on the device and try the connection.
• Delete the applications after installing which the failure manifested. If the connection does not work in a specific application for synchronization, make it a cache. If it does not help - reinstall (and on a mobile device, and on a PC) or try using analog.
• Scan the device with antivirus.
• Reset the device's operating system to the factory settings.

The culprit of the failure is a computer. What to do?

• Complete the operation of the OS, turn off the PC from the socket (or press the key on the power supply) and 15-20 seconds hold down the POWER button. This will discharge the tank and remove the wandering static charge that can block the definition of the connected device.
• If the phone is not recognized only by one USB port group, open the lid system Block And make sure the reliability of their connection. By the way, the normal charging of the mobile device through the port does not yet indicate the health of the second.
• Load the operating system. Open the Device Manager and check whether the portable devices are present in the equipment list, and among them your phone. If it is present, but marked with a black arrow in the circle (disabled), click on the line of the right mouse button and select the Enable Device command in the menu.

• If there are unknown devices in the equipment list (marked with an exclamation mark in yellow triangle) Perhaps one of them is the phone. In order to make sure that it is, disconnect the mobile device from USB. If the unknown device disappears from the list, it means that it is. And the cause of the failure is the absence in the system of the desired driver. How to reinstall and from where to download the driver to the phone, we will tell a little lower.
• The problem with the recognition of the connected devices may be due to load failure, damage or absence of USB drivers. In this case, exclamation marks will be in the "USB Controllers" section.
• Reinstalling drivers did not help? Scan the computer disks with antivirus and after temporarily disconnect protective programs. By the way, the latter can block access to a mobile device as a carrier if there is a suspicious or obviously malicious software. So the viruses should check and the phone too.

• Delete the programs after installing a problem, or make the system restore control point, created per day when there were no problems yet.
• If, in addition to the phone, the computer does not recognize other devices connected via USB - mouse, keyboard, printer, flash drives, etc., (they are charged or not - not indicative), a source of failure can be any faulty component of the system unit or then from the periphery. You can determine the culprit at home in the method of alternately shutting down or replacing the equipment on knowingly serviceable.

How to reinstall the Mobile Device Driver and USB on a Windows Computer

iPhone.

• Connect the iPhone to PC.
• Open the% CommonProgramW6432% \\ Apple \\ Mobile Device Support \\ Drivers folder (in order not to type command manually, copy it from here, insert any folder into the address bar and click the transition button). It contains 2 files (out of four) with extension.inf - usbaapl.inf and usbaapl64.inf.

• Open the context menu of each of these files and execute the "Install" command.
• After installation, restart the computer.

Android

Android smartphones and tablets, such as Samsung, Xiaomi, Lenovo, Meizu, HTC, etc., as a rule, do not create separate folders to store their drivers, and on official websites they often do not find it easy to download and Reinstall. Therefore, to begin with, you should entrust the reinstalling already present in the Windows drivers system.

How to do it:

• Open the context menu of the problem device in the Device Manager. Select the "Update Driver" option.

• In the next window, first select automatic search updates. If Windows does not find anything suitable, check the second item - installation and search for manually drivers.

• Next, click "Select from the list available on the computer." In a new window, all drivers will be displayed mobile deviceswhich are already installed on the PC.

• To narrow the search, in the "Select Driver for this device" section, set the "Only Compatible" label. Mark what more matches your query (if in the list more than one item) and to go to the installation, click "Next".

To make the driver correctly, restart the computer.

If the reinstallation of the driver already standing in the system did not help, you will have to search for something else on the scope of the network (with a risk to download instead of the desired virus), so download them only with reliable and proven sites, like 4pda.ru, and check the antivirus before installing.

The driver of the most common mobile gadget models are also collected in the USB Android drivers application, which is available for free download on Google Play.

USB drivers for Windows usually without problems are on the sites of laptop manufacturers or motherboards desktop PC. Sometimes they are part of the driver for the chipset.

If the phone is not recognized in the firmware mode

That computer and phone do not see each other in fastBoot mode, Specifies the message "Waiting for Device", which appears in the firmware program. Most often, this error occurs due to the lack of a mobile device driver in the system, so you first do what is written above - reinstall the driver or download and reinstall it.

If not helped:

• Make sure that you exactly follow the instructions for working with the firmware installation program and it is running on behalf of the administrator.
• Check whether the USB debugging on the smartphone is enabled (if not, turn on), and the device itself is in Bootloader mode. If this mode is locked, locked the User Unlocking Instructions for your device model.
• Connect the phone as short as possible and obviously a good cable to the USB rear jack, without using any adapters and hubs.
• Perhaps your phone does not support the USB 3 standard (blue socket), so connect it only to USB 2.0 (black sockets).
• Install all the Windows updates issued on your computer.

If the problem persists even after that, try to perform the phone firmware on another PC. And better - with a different version of the operating system.

When the problem in the breakdown of the physical interface

Faulty physical interfaces, especially on mobile gadgetIt is advisable not to use at all (do not load the current to avoid exacerbation of the breakdown), even if the phone or tablet retained the ability to charge through them. You can organize the transmission of content either by wireless communication (Wi-Fi, Bluetooth), or through cloud serviceswhich are available on the other device. In particular, iTunes and ICloud for apple technology, Google Drive., Yandex Disc, Dropbox, Microsoft Onedrive and many others - for everyone.

Cloud services It is convenient to use for transmission photos, video, music, documents and other types of files. To synchronize contacts on android and PCs are enough opportunities gmail mail. And to control the phone directly from the computer, you can put the application like MyPhoneExplorer on them (consists of 2 parts - for phone and for PC), which supports and wired and wireless connection Devices, without requiring installation of drivers. Very comfortably.

In a word, there is always a way out and often much easier than it seems at first glance.

Smartphones and tablets are so firmly included in our life, it is difficult to imagine how you can do without these devices. But they sometimes give us unexpected troubles. Each owner of the smartphone had to deal with an unpleasant situation, when accidentally or as a result of its erroneous actions with the device, various mobile data was lost - photos, music, messages, contacts, applications, and files.
If your device running on the basis of Android, a nuisance occurred in the form of loss of any data, do not rush to upset. All mobile data stored on your device can be successfully restored. Opportunities for data recovery on Android abuse, the main thing is to choose the correct software to ensure the necessary software to provide or use the services of restoration on the network. But you need to remember, the faster you start recovering data in the phone, the more chances to achieve positive result eventually.

My Phone Explorer. - free program For work S. phones sony Ericsson and on the basis of the system under android management With PC. In addition to the main possibilities, such as multisinchronization, working with text, images, nobility, contacts and other, the program has the ability to back up data and recover data from the backup. The program successfully restores:

1. Phone Contacts
2. Call log
3. Events and tasks
4. Notes
5. Phone messages
6. Files on the phone
7. Applications

Work with the program requires initial settings in PC and phone. In the PCs, drivers must be installed for your device, and the "USB debugging" mode must be enabled in the phone. In the future, work with the program does not cause any difficulties.

How to restore remote messages in the phone

If you accidentally delete messages from the phone, then upon subsequent synchronization with a PC, the program will propose to save copies of these messages to the archive, which then you can always read or restore.

My Phone Explorer.

To be able in case of failures or collapse, restore the desired part or the entire volume of the phone data, you need to re-create backup copies of the phone data. Mark the checkboxes need components, select the path to save files, on PC applications and run backup. The program will create a backup with the "MPB" extension in the specified location. To recover data, connect the phone to the PC and specify the path to the file with backup. Depending on the phone's log file, the file copying process itself will take some time.

The MyPhoneExplorer program consists of two parts, the program itself, which is installed on the computer and the client part, which is installed in the device on the Sony Ericsson or Android, which can be downloaded to Play Mapket. PC connection with a phone is possible via Wi-Fi, USB or Bluetooth. The program does not require the right "root" for its work, it is very convenient, simple and reliable in its work. Homepage