The Internet is an integral part of the modern lifestyle. Enter into digital web can be mobile applications and wi-fi waves. But the reception quality and signal level directly depends on the device that transfers, in our case the router. D-LINK models have the greatest popularity at the requests of consumers. The main aspect when creating an exit to the Internet space is proper setting D-Link Dir 320.

Creating a connection between the router and computer

In order for D-Link Dir 320 securely perform all tasks, it will be necessary to install it. Usually, in the kit comes detailed instructionsBut not in all cases. Before moving to the connection with the computer, it is necessary to check its characteristics:

1. Open the terminal control panel.
2. Click on the "Network Status" item.
3. Go to the Property Change Page.
4. In the new menu, open the properties of the local grid.
5. A list of switches will appear. Determine "TCP / IPv4" protocol.
6. In the menu that appears, resolve the definition of IP numbers and DNS server in automatic mode.
7. Save.

Connection is carried out using wires located in a set with the device. Among them: Cable and power supply for five volts, LAN cable. The router has seven functional connectors (for powering, USB - input, network socket, LAN - sockets). The cable that is supplied by the company is a representative of the service representative to the Internet jack. Wire, delivered in a set with a router, attach to the LAN jack on the PC, and the other end to the router (such a scheme is characteristic of a PC without Wi-Fi adapter). If you distribute traffic through Wi-Fi WavesUse the LAN-wire no need. Turn on the power supply into the outlet.

Video on setting the router D-Link:

Next, to log into a Wi-Fi router, you need to start any standard browser and enter the numbers 192.168.0.1 in the search bar. The menu will open, where you need to pass authorization (enter login and pin code). When you first use the router, this information is standard, name and pIN code - "admin". But if the account already has, and you forgot the combination of numbers, click on the restart "reset" on the rear panel.

Cable inclusion

There are several types of communication:

• PPTP;
• PPPoE;
• L2TP.

All manipulations are manufactured in the device service. To adjust PPTP, you will need:

1. Open menu, configure the router, select the "WAN" item.
2. On the next page Press the add button.
3. Assign the PPTP Dynamic IP method.
4. Put a tick for an automatic connection in the VPN section.
5. Specify personal information of the user (login, PIN and confirmation), mark the VPN properties. All this information is provided by the Provider, which connects to the Internet. The client data is inscribed in a two-way contract with the provider. If they are absent, contact support service.
6. Apply.
7. Enter the system properties of the interface and click on the "Save and Exit" button. New changes will take effect.

Debugging parameters L2TP:

1. In the front window, under the "Network" tab find the value "WAN".
2. In the next menu, click Add to Switch.
3. Set the "L2TP dynamic IP" type.
4. Put a cross to automatically detect.
5. Enter confidential information Owner (nickname, code combination and confirmation), specify the address of the VPN server.
6. Go to system section Interface and click on the save panel. New parameters will take effect.

Adjustment technique PPPOE connection Identical ways. The difference is only in the protocol. But there are also PPPOE, L2TP protocols, PPTP with a static IP address. The debug procedure is identical to all protocols and consists of stages:

1. On the work field, under the "Network" tab, select the "WAN" item.
2. In the appeared window, confirm the addition.
3. Select "L2TP, PPPOE, PPTP Static IP" format.
4. In the Identifier Settings section, enter the IP address, DNS server, main gateway, network mask.
5. Specify user data (login, security code and repetition code).
6. Enter the system parameters of the interface and save and reboot. New parameters will take effect.

Video configuration PPPoe compound On the D-Link router:

Usually services with static protocols when configuring D-Link DIR 320 are provided. legal entities and companies or individuals According to a special request.

Exit to the network cobweb through a USB modem

On the rear panel there is a USB socket. The router can operate at the expense of the mobile Internet. Such modems produces almost every communication operator (Beeline, MTS, MegaFon). To establish communication with external adapter. It is required to go to the properties in the router interface. Set the value of the USB adapter in the first section. Write the name of the telecom operator. If there is no default list, select the "Custom" parameter. Fill out all the necessary fields with personal characteristics (username and code), recognize them with a provider or telecom operator.

Video to help on step by step adjusting the router:

Go to the "USB modem" tab, go to the information section. In the window that opens, select the modem and generation device type wireless communication (4G, 3G, E). Allow accession to K. mobile network the Internet. Press the action button. On some modem devices, the default password is used when entering the system. To avoid permanent password entry when turned on, go to the "PIN" tab in the USB section. Specify the code that is provided by the Provider.

Wireless connection

For change wi-Fi characteristics, you need to go to the "Network" tab and select the section " wireless transmission" In this window, the user may stop wireless way Traffic transmission. Specify the method of network authentication.

Factory settings are not designed to encrypt information. To protect traffic from interception, specify a method that is different from Open. Come up with PSK code - this is a password that will be requested when the Wi-Fi network is located.

Software update

It is recommended to constantly monitor the emergence of new updates and make them install. Each update adds new features to the router and increases the level of network protection against unwanted hacking. In the "Support" tab, you can get acquainted with the latest topical version of software.

To update the device, you need to go to the "System" section and open the "Update" section software" A window will appear in which you want to click the "Overview" button. Specify the path to the current firmware file that is on your computer (downloaded from the Internet resource in advance).

Installing a Wi-Fi connection

When all the required settings are made, the last stage of the setup begins. On the PC with the Windows 7 operating system, the order is as follows:

1. On the right on the taskbar there is an Internet access icon. Press it.
2. A window will open, which shows all the distribution detected by a number of wireless Internet. Click on the appropriate channel.
3. Click on the "Connection" icon.
4. If the security code is installed, you must enter it.

After completing these steps, the Internet will be available.

Conclusion

By completing the required debugging, the device will correctly perform all its functions. The process of configuring the router is quite time-consuming, not every user is able to cope with it. Therefore, when drawing up a contract with the provider, it provides the technique of the Specialist, which will configure the router for high-quality work.

If you purchased a new router, either moved to a new place of residence with old equipment, then most likely you will need to configure the router D link dir. 300 Rostelecom. This process is not as folded, as it seems at first glance. In this article, we will prove this and consider all the steps of this procedure, as well as the configuration of the router D LINK DIR 320 Rostelecom.

Preparing a router to work

Before proceeding directly to work, you need to examine the device itself and perform a few simple operations:

• connect the power cord and make sure that the POWER indicator is on;
• connect the cord from the Internet to the corresponding connector: all of them 5;
• make sure that port 1 and work indicators tanned on the front panel wiFi networksindicating that the cable is connected correctly and the signal from the provider servers comes to the device.

Important: The first four connectors are designed to connect the computer and the router by cable. Fifth to connect a telephone wire (Internet), as a result of which D Link 300 will take on the ADSL modem function.

Now I will get the documents that Rostelecom provided us, they are needed to configure the DIR 300 router.

How to configure the DIR 300 router with the old web interface

Setting up the router D LINK DIR 300 Rostelecom starts with the preliminary settings of the computer. They are carried out as follows:

• click on the keyboard code combination Win + R. We will open the "Run" window;
• we enter a combination of NCPA.cpl in an empty field;
• in the network connections window that opens, select your current (which is customizable) and open its properties;
• from the list, select the Internet protocol fourth version and also go to properties;
• if any IP and DNS addresses are specified, we switch the network to automatically receive data.

Next, open the browser and, as well as while setting up the DIR 320 router for Rostelecom, we enter a combination in the address bar: 192.168.0.1, which will lead us to the authorization page. Know the login and password when setting up a new device (purchased and never used) is not necessary, since the value is equally for both fields - the word "admin" is strictly in the lower case. If an error pops up, indicating the wrong password, then the router was previously adjusted and you need to learn the new Password installed or reset the value by pressing the RESET button.

After a successful entry into the main interface, the router is likely to offer you change standard password On your own. We enter the invented combination of characters in two fields, confirm and again pass authorization, but with new data. If everything is done correctly, you will see the main menu in the form of a large "buttons" rather large size.

To start setting the network, perform the following operations:

• click on the first (bottom left) button of the second line "Configure manually";
• in Upper text menu Select the item "Network";
• open the already available connection "WAN";
• we welt the page down and in the lower right corner click "Delete";
• we are waiting for the page to be updated, the "Add" button will appear on the right, click on it;
• on the settings page that opens, specify the type of Internet connection - PPPoE;
  port do not touch;
• the name is chosen anyone (this will be called your connection in "Network Connections" on the computer);
• below you specify the login from the Rostelecom agreement, as well as the password;
• we save the changes made, then once again click "Save" in the center of the page.

At this stage, we remove Rostelecom in the direction of the contract and check the configuration of the DIR 300 router setting - go to any page of the Internet. It should open without problems. It remains only to configure the wireless network. For this:

• open the WiFi menu item (located next to the "Network");
• in the SSID field, we prescribe any name for your network and proceed further;
  To set the password, we save the changes and select from the available options for WPA2-PSK;
• we enter the invented password and persist again.

On this, the connection and wireless network are ready for operation.

Configure Routher Dir 320 Rostelecom

Since setting up the new firmware of the DIR 300 router and the main firmware of the 320 model 320 is practically not different, we will give a common network setting instructions on this type Rostelecom devices.

Primary setting of the router D Link Dir 320 Rostelecom is carried out in the same way as described earlier:

• we connect network cables and install the automatic receipt of IP / DNS;
• after that, you authorize with standard data and set your own entry password;
• in the interface window that opens, we look at the lower right corner - "Extended Settings";
• in the "Network" field, select the first paragraph submenu - "WAN";
• select an existing connection already and by analogy, click "Delete";
• add a new connection in the same way as in the previous paragraph, inserting the name of the network and data from the contract, after which we retain it;
• open the notification that appears (the light bulb in the top menu) and click "Save";
• we update the page and observe the connection status "connected".

On this, the Rostelecom Route 320 Rostelecom router is completed. Check the connection performance by going to any of the search engines or the site social network. If everything is done correctly, the Internet will work.

Setting up WiFi router D LINK DIR 320 Rostelecom

To set up a DOTER D LINK DIR 320 Rostelecom to "Distribution" wireless connectionYou must return to the main menu and open the advanced settings. Next to the "Network" field you can find the Wi-Fi settings you need. Go to the "Basic Settings" submenu and specify as in the previous firmware, network name. Then return a step back and open the security settings where you need to install the same type of network authentication and the same long password (at least 8 characters), as on the D LINK DIR 300 router. We save the changes twice (second time in the top notification) and check availability of WiFi network on any suitable device.

From this article, you learned how to set up a DIR 320 router for Rostelecom, as well as its previous model, and these instructions should work in most cases. If you have such a characteristic problem as the unavailability of the IP Web interface (i.e., the browser does not open the authorization page after entering the combination 192.168.0.1), then again go to the properties of the Internet protocol (where we set automatically getting IP / DNS) and switch Network to work with static data. In the currently active fields indicate:

• 168.0.12;
• we leave unchanged (should be filled automatically);
• 168.0.1;
• dNS data from the contract;
• also indicated in the contract.

After applying these changes, the authorization page should be affordable. If you still have any questions, see this video:

And on this everything. Tell us and you us about your internet connection experience. Any questions in the comments are welcome!

Connect the DIR-320 router to the Internet using an external modem or a regular Internet cable provided by the provider. All parameters are specified in the web interface, installation is not required to configure the router. separate applications. D-LINK devices have a large number of settings to achieve optimal work home network.

Connecting the DIR-320 router and enter the web interface

You can configure the router when wired connected or connection via Wi-Fi. Insert the Internet cable to the router, which is conducted to the provider's room. To do this, use the last port marked with gray. Attach home computers using LAN ports highlighted in blue on the rear panel.

In the 5V-2A connector, insert the power supply plug. If the Internet is connected via an external 2G / 3G modem, insert it into the "USB" connector. Turn on the DIR-320 into the socket only after connecting all cables and external devices. Otherwise, interruptions may occur in the operation of the router or its breakdown.

Connect the network on the computer with a change in the parameters of the D-Link DIR-320 router. For using wi-fi Select "D-Link" from the list of wireless connections. The default encryption is missing, so you can perform an operation without entering a password. If the cable connection is used, insert the plug into the computer or laptop Ethernet port.

On the selected device, open the web browser, for example Google Chrome.. In the address bar of the program, enter the IP on which access to the DIR-320 router settings will be accessed. Address B. standard firmware Router: 192.168.0.1. On the page that opens, you will need to enter data to access the control panel. Standard login and password: Admin. Fill in text fields and click "Login".

Note! If the D-Link DIR-320 account has been changed earlier, reset the router settings. To do this, press and hold the "Reset" button on the rear panel for 10 seconds. When the factory parameters are restored, repeat the input with the input of standard data.

With the correct indication of the account information, you will be redirected to the statistics page. Among other data, it displays the total number random access memory On the DIR-320 router and the amount of available memory. The following time from the last turn on the D-Link router is displayed.

Internet connection via 2G / 3G modem

To install a connection through an external device, go to the "Internet Setup" menu and select the "USB Adapter" value in the first field. Select the name of your operator in the following drop-down list. If the system does not have data for your 2G or 3G provider, set the value " "And write the name of the operator in the following text box.

In the "User Name" and "Password" sections, enter the data provided by the provider. If necessary, enter the dial number in the corresponding field and the name of the access point in the "APN" string. Specify necessary information Can be technical support or on the official website of the Internet provider. The remaining items are recommended to be left unchanged.

Open the "USB Modem -\u003e Information" section. In the first list, specify the type of modem depending on the generation of wireless communication. Allow access to K. mobile Internet In the second drop-down list. The remaining rows of the table will contain information about the connected device. Click the "Connect" button in the lower right corner of the page.

Important! If the modem is not identified, disconnect it, and then insert it into the USB port and click the "Update" button below the table.

Some operators require the entry of the PIN code to connect to the mobile Internet. You can specify this information in the same menu, through the "PIN" section. Enter the current digital passwordprovided by the operator in the PIN field. So that in the future the system has not requested the code each time you connect, check the box and click "Apply".

Cable connection DIR-320 to the Internet

Open the "Network" menu and go to the " P-T-P Interfaces" By default, their list will be empty. To create a new interface for D-Link, click the "Add" link in the connections table. In this section you can create network connection Using L2TP, PPTP and PPPOE protocols.

Select the connection type from the first list. It can be clarified in the contract, which was concluded with the Internet Provider. There also indicate the account data, if they are required to set the connection. In the absence of the contract, you can clarify the data by calling or writing in support of the company that provides Internet connection services. Fill in the required fields and click Edit.

Connection with static IP is produced similar way. If you select the "Static" value in the "Interface Type" section, new text fields appear: IP address, network mask, MAC address. All this data is also provided by the provider.

In the "Status -\u003e Network Statistics" section, information about the work of different interfaces, including:

• Appointed addresses;
• Reception speed and returns;
• The number of accepted and sent packets;
• Discarded packages;
• Packages taken with errors.

Installing network parameters

You can manage running interfaces in the "Network -\u003e Network Interfaces" section. Opposite each record displays the current connection status. Each of them can be temporarily stopped or disabled. Among the interfaces available are connected LAN devices (laptops, computers and other home network devices), wireless technology Wi-Fi and WiMAX.

To add DNS servers, go to the "Ince Servers" section. In the "Method of Setup" field, the default is set to automatically obtaining values \u200b\u200bfrom the Internet provider. Selecting the Manual Point will allow you to specify other DNS servers. You will be able to enter their IP addresses in the second text box. To save addresses, click "Change".

Assignment of IP addresses within the local network is performed by the DHCP server. Open the "Setting up DHCP" tab to change its operation mode. In the "Static DHCP" table you can bind permanent addresses for individual devices. Compliance is set to the MAC address.

You can find out the MAC address of the device for further binding in its parameters. For computer computers operating system Windows Definition Mac is made in command line. To do this, use the command: "IPCONFIG / ALL".

Settings of the current server can be changed by clicking on its name. The most important parameters in this table are the initial and end address of the range. The system will automatically assign new IP address clients from this numerical interval. If it is necessary to change it, make sure that the new values \u200b\u200bare included in the range allocated for local networks.

Educational Video: Step-by-step setting D-Link DIR-320 for teapots

Wi-Fi Setup

Open the "Network -\u003e Wireless connection" The first checkbox is responsible for wi-Fi work module. If you remove it, the wireless broadcasting of the router will be discontinued. Other parameters:

• Hide access point - makes a network invisible in the overall list.
• SSID - The name Wi-Fi, which will be displayed when searching for networks.
• Country - Allows you to select the territory on which the device is used. The parameter affects the list of allowed channels.
• Channel - Range number within wi-Fi frequency. Standard value: 6.
• To select the encryption type and specifying the Wi-Fi access key, click Safety Settings.

In the first list, select the network authentication method. By default, the connection to the D-Link is performed without encryption, and the password is not required to connect to Wi-Fi. It is recommended not to leave the "Open" value in order to avoid interception of network traffic. Select another authentication type and set the PSK key (password to be used for Wi-Fi).

Important video: Router settings DIR 320 settings

Changing the system parameters of the router

On the System tab, you can restart the D-Link router or go to any invested section. If the reboot is performed by pressing the button in the "Actions" table, the changes made at the previous stages will not be applied. To save them, another button is used: "Save and restart". It is located in the upper right corner.

The "Administrator Password" section allows you to change the standard account data. To do this, select the user "Admin" and check the "Change system Password" Enter the new password and its confirmation in the following two text fields. To provide best defense Home network, use complex passwords containing special characters, numbers, small and big letters.

When everything is necessary wi-Fi settings The D-Link DIR-320 router will be changed, it is recommended to save the configuration to the file. Go to the "System -\u003e Configuration" menu item, click " Backup copy"And select the directory to which backup will be recorded. If the router fails or another user will accidentally restore the factory configuration, you can return the parameters from the saved file.

Tip! To restore the factory settings, use the appropriate item in the same menu.

D-Link recommends performing a regular update of the router software. Each new firmware Contains not only the expansion of the functionality, but also updates network security. Using latest version Software will save the device from hacker attack. Actual version You can download the manufacturer's website, in the "Support -\u003e FTP" section.

The downloaded file is installed on the DIR-320 via the "System -\u003e Update" menu. Click the "Overview" button and specify the path in the system by which the new firmware is saved. Then click "Update" in the lower right corner. The update installation process will take a few minutes. After automatic reboot of the router, you can take advantage of new version software.

1. Connect an Ethernet cable included in your apartment in the port Internet Your router.

2. Make necessary settings On the network card of your computer. To do this, click the left button on the button. Start, Select Control Panel, Further, paragraph Network connections.

In the right mouse button that opens, click the Network Card icon and context menu Select Properties.

Left mouse button once click Internet TCP / IP Protocol and click on the button Properties.

Make settings similarly shown in Figure:

3. Connect an Ethernet cable network card Computer and one of the ports of the router, for example port number 1, as shown in the figure.

4. Open the browser window and enter in the address bar http://192.168.0.1 and press ENTER. In the authorization window that appears in the field Username Choose admin.,

in field Password dial admin., and press entrance.

5. After pressing the button entrance The settings page opens. In the tab Net This page select Section Connections (left) and click on the connections icon WAN..

6. In the page that opens, FIRST OF ALL remove the checkbox to get the DNS server address automatically, and THEN Get the IP address automatically.

7. After that, in the appropriate fields, your IP address, subnet mask, address of the access gateway to the Freedom network and addresses DNS servers and press Save.

8. Now you need to create an Internet connection. To do this tab Network connection Press the button Add.

Attention!! For the correct operation of the IPTV + Internet bundle, the router setting is necessary via PPTP protocol.

9. In the window that opens, select Connection via the L2TP protocol and edit the connection created by us as in the figure. After execution, click Save.

10. Now on the tab Network - compound You must install the default connection with us, for this place the point in the L2TP connection line.

In the window that opens, alternately fill in the following rows (See the table below) and click Save.

Also, for correct operation, it is necessary to register the address server addresses. We go to the tab Advanced - Name Servers.

Put a tick on Manually And we prescribe the DNS addresses from your registration card.

If you have several computers and you want all of them to access the network, then for this, you set up their network cards similarly to the settings given in paragraph 2 of this instruction and connect with Ethernet cables network cards of computers with free router ports.

Note! The instructions contain all the necessary settings to be able to view the TV programs on IPTV.

Ports - 1 WAN and 4 LAN. The first type of WAN port is used to connect to global Network (Wide Area Network) - In our case, this port is used to connect the cable incoming from the provider. Connect the cable to it, which is included in the apartment. LAN - used to connect computers you have in the apartment. Connect to them using ordinary network cables (Patch Cords) Computers that need to access the Internet. The Dir 320 router has a built-in administrative interface for configuration, simply speaking - a special web page going to which the router can be configured. To do this, use any computer connected to the LAN port on the router.

The parameters of the new router by default in the DIR models are usually listed on a special sticker at the bottom of the case - usually it is IP - 192.168.0.1, the username is admin, the password is an empty field, but there may be other values. Specify these parameters on the sticker or in the user manual. If your router is not new and has already been used by someone - find the point about the procedure for resetting parameters to factory settings, usually a special reset button is used on the back of the housing that you need to press something sharp and keep for a few seconds. .

Note - A new router after connecting to the network automatically assigns to all computers connected to LAN-ports network settings, Therefore, check that no IP addresses were specified in the network card settings, all values \u200b\u200bmust be set to "receive automatically".

Configuring a computer for connecting to the DIR-320 router

1. Connect the DIR-320 router into the outlet.
2. We connect the computer's network card with a router with a router, connect to any free LAN1-LAN4 port.
3. Connect the Internet cable to the Internet / LAN port.
4. We go into the properties of the connection on the local network.

Select the "Internet protocol (TCP / IP) and click" Properties ".

In the "Properties", we note the parameters "Get the IP Address automatically" and "Get the DNS server address automatically"

We view automatically received settings.

Setting up the DIR 320 router for Triolan provider

After you learned the parameters of your router (, login and password) - open the browser and enter 192.168.0.1 in the address bar. If everything is right - you will appear before you invitors - enter the login and password. We enter the system under the following parameters:

• Login: admin.
• Password: I do not enter anything (empty).

Click on "Internet Connection Setup Wizard".

In the next window, click "Next".

Install your password, then click "Next".

We define your time zone (Ukraine - GMT + 02: 00). NTP Server Used: ntp1.dlink.com, click "Next".

Select the connection type "Static IP Address Connection".

DNS addresses Indicate the following (for all Triatan provider subscribers):

DNS 1: 109.86.2.2

DNS 2: 109.86.2.21

We see a notification of the completion of the setting, click "Connect".

Checking if the Internet works if so, then you did everything right!

Setting up WiFi on DIR 320 router

It is very important to understand that the correct security setting wireless network meets the restriction of access to your account Internet and guards your money. If the wireless access point is configured incorrectly, third parties can connect to it and use the Internet at your account.

Note - correctly setting up the wireless module and protect your own account information - the task of the subscriber, the provider is not responsible for the safety of the Subscriber in this case. The minimum level of the security settings of the wireless module - the encryption level is not lower than WPA /. Using WEP or OpenSystem is not categorically recommended.

For wiFi settings On the DIR 320 router module, press the "SYSTEM" menu button, following Wireless Setup, then select "Manual Wireless Connection Setup"

Wireless settings

• WIFI PROTECTED SETUP (WCN2.0) - disable
• Enable Wireless - Enable
• Wireless Network Name () - anyone convenient for you Wireless Network, for example HOME
• Enable Auto Channel Selection - Enable
• WMM Enable - Disable
• Enable Hidden Wireless - Disable
• Security Mode - WPA / WPA2
• Cipher Type - TKIP
• PSK / EAP - PSK
• Network Key - any secret key of your network (min 8 characters, English letters and numbers)

Click "Save Settings" - settings will be saved.

After making any changes, you must restart the router so that they entered into force. To do this, click the "Reboot" button on the left menu.

Video Instructions for setting the D-Link DIR-320 router for VPN (PPTP) connections

Setting up VPN connections on the D-Link DIR-320 router

Settings Dynamic PPOE

• MY Internet Connection IS - (UserName / Password)
• Dynamic Pppoe - chosen
• User Name - Your Login for Internet Access
• Password - Your Password for Internet Access
• SERVICE NAME - HOME
• RETYPEPASSWORD - Repeated your password to access the Internet

Click "Save Settings" - settings will be saved. After making any changes, you must restart the router so that they entered into force. To do this, click the "Reboot" button on the left menu.

To check the correctness of installations and reconnect PPPOE, press the "STATUS" button in the top menu.

On this page, you can use the "Connect", "Disconnect" buttons to initiate connection or disconnecting the connection.

The current connection status is displayed in the column on the left and one of the router LEDs.

You can download here.