Many owners of the "sixth" iPhone report broken screens in their devices. An epidemic of “sensory disease” has swept apple smartphones, repair specialists confirm user reports. Expensive devices without visible reasons turn into "kiprichi" - the screen stops responding to pressing. Most phones are out of warranty a long time ago, so it’s impossible to repair a “sick” iPhone 6 or 6 Plus in the Apple service.

"Touch disease" screens iPhone 6 and iPhone 6 Plus was discovered at the beginning of the year. According to the reports of repair engineers, it affects the controller chips of the device's touch screen. As a result, the premium smartphone does not respond to screen taps in any way. Accordingly, it is impossible to use the iPhone 6 and iPhone 6 Plus with a broken screen.

The screen problem in the iPhone 6 does not appear immediately. First, the status bar turns gray and starts blinking. Then the touch screen of the smartphone stops responding to touch.

On the eve of iPhone presentations 7, which is expected on September 7, i.e. in two weeks, iFixit, an independent service center for the repair of smartphones and other mobile devices, has released a detailed report on the iPhone 6 screen issue. iFixit says "touch sickness" is a massive phenomenon, affecting thousands of smartphones.

"We don't know exactly how many iPhone 6s suffer from the screen problem, but every repairman we interviewed said the 'sickness' is very common," iFixit says.

“Almost every iPhone 6 and 6 Plus is a kind of “bombs” with a cocked clockwork. Sooner or later, such a “bomb” works, and the owner finds himself face to face with a useless smartphone, the repair of which is far from every workshop, says Jason Willmer, owner of the STS Telecom repair shop.

How to repair the screen in the iPhone 6 and 6 Plus and cure "touch disease"

Repair "iPhone-brick" is possible. In the service, you need to open the smartphone, carefully unsolder the broken touch screen controller chip and solder in a new one. mend iPhone screen 6 can far to each service center.

The repairman needs to have at his disposal special equipment for microsoldering, and the operation itself will have to be carried out using a microscope, it is so delicate. The technician will have to unsolder the broken tiny chip from the iPhone motherboard and replace it with a new one. The procedure is quite complicated. This is the only way to bring the “bricked” iPhone 6 back to life.

Such a complex repair using a microscope and a special soldering iron is not for every serious person. service center, not to mention small workshops located in kiosks and cellars.

Why does the touch screen stop working in the iPhone 6 and 6 Plus

Microsolder specialist Jessa Jones believes the "sensory disease" is the same design flaw that led to the bent iPhone 6 and 6 Plus. Thin and wide smartphone cases bend more "willingly" than previous generations Apple smartphones. The bend is exactly where the touchscreen controllers are soldered to the motherboard. For iPhone 6S and 6S Plus case strengthened, and this generation is spared from the problem of bending, as well as from "sensory disease".

“Over time, with the daily use of more and thin smartphone sooner or later, small cracks and micro-breaks in soldering appear between one of the controller chips and motherboard. So far the screen is working fine. However, later the owner notices that sometimes the screen does not respond to pressing. After a reboot, the screen problem goes away. But the destructive process has already started and is not going to stop. Sensor interruptions are getting longer, and the crack is expanding and, finally, one of the controller contacts is torn off the main board. Any fall accelerates the development of the "disease". Eventually, the screen on the iPhone 6 or 6 Plus will completely stop responding to the user's touch,” explains Jessa Jones.

By pressing on the screen or trying to carefully twist the iPhone 6 in a horizontal plane, you can briefly bring the smartphone screen back to life. The heating of the smartphone also helps, which can reconnect the controller contacts that are open from bends. However, such tricks can only serve as a temporary solution to the screen problem in the 6th iPhone. Sooner or later, the display of the device stops responding to pressing.

Jones explains that the only reliable solution is to replace both touchscreen controller ICs after cleaning motherboard below them. The cost of such repairs corresponds to the operation of replacing the screen in the iPhone.

The vast majority of iPhone 6 or 6 Plus are already out of warranty, so official service Apple won't help you for free. You will have to solve the screen problem for your hard-earned money.

Replacement iPhone glass 5s, solving the problem of an iPhone 6 that stopped responding to touch, “bricked” due to iPhone error 53, entering a death date and a lot of other problems with apple smartphones will be helped by repair specialists in trusted workshops. For example, repair broken glass in the iPhone, in any case, you will have to spend at your own expense, because for mechanical damage official guarantee Apple does not apply, even if the device was purchased just a month ago.

Apple store employees tell consumers that they are aware of touchscreen failures in the iPhone 6 and 6 Plus, but the company does not seem to officially acknowledge the existence of a "touch" disease.

Other news

Every year, dozens of new smartphone models are released by manufacturers. Some as a distinctive feature can boast of their low cost, others high performance, others ergonomic design, the fourth endowed with excellent energy-saving characteristics, powerful battery and impact resistance. But none of these devices can be 100% protected from breakdowns of a different nature. One of these troubles is the spontaneous operation of the touchscreen, which, as a rule, is inherent in Chinese budget smartphones. In view of what the sensor on the phone is pressed by itself and how to deal with this problem, you will learn from the article.

Incorrect operation of the touchscreen is not the most pleasant phenomenon, but the problem is fixable

Conventionally, the reasons that the sensor itself is pressed can be divided into two categories:

• Software failure - occurs due to software errors ( software) smartphone;
• Hardware failure - errors associated with damage to the component parts of the device.

Depending on the model of your smartphone and the circumstances under which the erroneous operation of the screen occurred, it is more or less likely to say which of the above failures caused this problem. So, in Chinese budget models(according to statistics, most often in Alcatel and Xiaomi) incorrect operation of the touchscreen occurs as a result of poor assembly of the device and a cheap resistive display, which is known to be vulnerable to the accumulation of static charge on its surface. Dropping a smartphone or pressing hard on its screen can also cause trouble with the touchscreen.

However, you should not despair. Before claiming that screen errors arose due to hardware damage, you should try to fix this problem software methods. Let's consider them in more detail.

How to eliminate the spontaneous operation of the sensor programmatically

So, let's look at several ways to solve this problem on our own.

Method 1: factory reset your smartphone

Depending on the smartphone model, the restoration of the “default” functioning parameters is performed in a certain settings section. However, the path to them is the same for most devices, only the names of these blocks differ. Therefore, we will consider how to perform a factory reset, using an example Philips smartphone S326.

Method 2: Screen Calibration

Recalibration of the touchscreen may be needed not only in the event of a software failure, after which the sensor on the smartphone clicks by itself. After a mobile device falls from a height, falls into water, replaces the display, etc., calibration must be carried out without fail - this can help in most of the cases listed here. Let's consider two methods that allow us to carry out this procedure.

Screen calibration using standard tools built into the smartphone

In those models of devices that have the ability to determine the angle of inclination of the touchscreen in the standard functionality, you can calibrate it without using special utilities. For this:

1. Go to the "Settings" section of our device;
2. In the block "Display", "Screen" or " Special abilities"Find the item" Calibration "and click on it;
3. In the next window, it is suggested, as a rule, to put the phone on a flat surface and start the calibration procedure, then your device will automatically adjust the optimal touch angle and complete it.

Using the dedicated app "Touchsreen Calibration"

This method is suitable for those whose smartphone models do not have built-in screen calibration tools. The application compares favorably with similar ones, primarily due to its ease of use, as well as the very high accuracy of determining the angle of inclination of the sensor.

1. So, to calibrate the screen using Touchscreen Calibration, you need:
2. Download the application from the link Google Play- https://play.google.com/store/apps/details?id=redpi.apps.touchscreencalibration ;
3. After installation, we launch the program, in the start window we see the inscription “Calibrate”, framed in a blue background, you need to click on it;

Click on "Calibrate" to start the touchscreen calibration process

The calibration procedure begins, during which it will be proposed to adjust the angle of the screen in six various modes touches, we go through each of them;

Do not forget that the smartphone must be on a flat surface all this time so that the calibration is as accurate as possible.

At the end, you will be prompted to reboot the device for the changes to take effect.

Here we click "Ok" and reboot the device in order for the changes to take effect

Conclusion

If the above methods did not help you fix the sensor pressures, then the problem most likely lies in the hardware of your smartphone. There are several hardware reasons due to which the touchscreen may work spontaneously:

• Resistive display - this species screens differ from capacitive ones in that it is a layer of glass on which a flexible membrane is applied; as a result, such a touchscreen wears out quickly;
• Poor quality of double-sided tape - Chinese manufacturers, and some service centers that repair displays by replacing it, like to save on double-sided tape, which is used to fix the screen inside the case. As a result, the touchscreen does not work properly.

For the above reasons, it is better to entrust the matter to a specialist than to try to repair the screen yourself. If you still want to do it on your own, I recommend viewing these touchscreen repair guides:

Often users modern smartphones Apple is interested in what to do if the sensor on the iPhone is buggy, for example, after replacing the glass. And all because all the work of mobile devices with touch displays is directly related to high sensitivity screen to taps with which you can use the functions of the gadget, view menus, work with documents. If the sensor stops working, even after replacing the display, it is no longer possible to fully realize your needs, which are often very necessary to fulfill.

Why does the sensor stop working on a smartphone

The touchscreen on an iPhone can start to fail quite spontaneously, for example, after replacing the display or if the smartphone has fallen. As a rule, the reasons why the touch screen does not respond to touch on a particular phone model or the touch screen works intermittently are associated with mechanical damage to the device. To protect the display from shock, you can install a protective glass on it or replace the film on it. Without additional protection, for example, when falling, the touchscreen on the iPhone sometimes starts to freeze or completely fails.

Also, the reasons why the iPhone screen is buggy and the touchscreen stops working are the following:

• liquid ingress into the body of the device
• failure after software replacement
• non-compliance with the manufacturer's requirements when replacing the display glass

If you're sure your iPhone hasn't been dropped or spilled on, but it won't respond to touch, won't turn on, or isn't responding correctly, then there's likely a software problem that you can fix yourself.

How does the display module malfunction

There are several signs that indicate that the sensor is buggy or the touchscreen on the iPhone does not work. These include the following:

• lack of sensor response to touches in a certain part of the screen
• ignoring any clicks on the display, which indicates that the sensor lags
• arbitrary operation of the gadget after it has fallen or after replacing the glass (applications and documents open by themselves)

Smartphone screen cleaning

When starting to restore the performance of a sensor that does not work well, hangs and slows down after replacing the glass or after you dropped it, you must first clean the display of your smartphone. You will not harm the phone in any way, but improve the connection, and perhaps the sensor will stop hanging and slowing down. This method will help if the display does not turn on, does not respond to touch, or the sensor periodically fails.

If the sensor does not work well when the buttons are pressed, and it often hangs, slows down, wipe the screen with a soft lint-free cloth moistened with glass cleaner various models phone.

How to restart your phone

If the touchscreen on an iPhone, after replacing the display or for another reason, periodically hangs or the lower part of the sensor does not work, then you can fix the problem by rebooting the phone. When the sensor on the iPhone is buggy, do the following:

• press the power button and the home key together, hold the keys for 20 seconds
• wait until the device reboots and the Apple logo appears on the display
• check if the sensor works by touching any icon

This guide will be one of possible ways how to restart your smartphone if the touchscreen does not work or any part of the iPhone sensor stops functioning

Check accessories if screen freezes or won't turn on

There are situations when it is the accessories that interfere with the normal operation of the display module and because of them the iPhone screen of any model is dull and buggy when the buttons are pressed on it. For example, if the original protective film was glued onto the glass incorrectly, the sensor stops working completely or only dulls at the bottom.

In addition, today you can buy any bumper on the iPhone, but not all of them can boast high quality. If the bumper you purchased covers the top or bottom of the display, then it will interfere with the normal functioning of its module, and the screen will start to fail. To understand whether this is the reason that the touch screen does not respond, you need to remove back cover and test the touchscreen on the phone. If the problem is in the bumper, then the sensor, which sometimes freezes, will then be restored. If, after removing the accessory, the screen on the iPhone does not stop blunting and glitching, then you need to further look for the cause of the malfunction of the display module.

What to do if the display module freezes or does not work well

If rebooting the device did not work and, as before, the sensor is buggy, or it does not respond to pressing in any way, then most likely the problem lies not in software failure, and in the event of a malfunction of the internal components of the phone, you will have to replace the failed part. In this case, you should contact professional craftsmen who will diagnose the screen, determine the sensor malfunction and repair the phone.

If the keys periodically fail and the sensor lags after you drop the phone, or the display does not respond to pressing, the specialist will first determine the cause of the malfunction, and then eliminate it. After the diagnostics, the master will tell you about the condition of the smartphone that was dropped or flooded with water, why the sensor is frozen or does not work well. If required, he will carry out a quality replacement of the display screen.

When do you need to change the display?

Screen iPhone any model is regularly exposed to various influences, which may cause the touch screen to not respond to touch. Also, scratches on the display can lead to the fact that the lower part of the sensor does not work. The solution to the problem when the entire screen or part of the iPhone sensor stops working is to replace the glass or install a new module.

You will have to change the display when the sensor is buggy or displays information incorrectly in the following cases.

The phone randomly began to be pressed at the top of the screen. I removed the film, everything went away, pasted another one, it seemed to work again then again, then the upper part of the screen about 1 cm stopped responding to touch. Please tell me how to solve the problem, can anyone had a similar or similar situation?

Users on iPhone, iPad and iPod are offended by the fact that the touchscreen itself is pressed on the screen and buttons, and after updating to iOS Beta, the touch stopped working. Today we will find out why the iРhone sensor hangs and is pressed by itself, and how to fix this trouble for the iPhone 5/6/7.

How to fix the problem - the sensor is pressed by itself

– free program, will solve all freezes and issues related to iOS 11/12 including, stuck on update, stuck on apple, stuck in recovery mode, stuck in DFU mode, constantly reboots, the screen is unexpectedly buggy and does not turn on, and much more. All in all, Tenorshare ReiBoot can fix freezing on iPhone XS/XR/X/8/7 Plus/7/SE/6 Plus/6s/6/5s/5.

iPhone display clicks by itself - Tenorshare ReiBoot

Step 1. First, you need to download and run the program on your computer. And connect the device to the computer via a cable.

Step 2. By clicking "Enter Recovery Mode", you can fix the smartphone screen itself being clicked using recovery mode.

In addition, the program can fix other problems, the display does not respond to pressing, . You can conveniently use this program on Windows and Mac.

There are several mods to iPhone display or the iPad behaved correctly and did not live its own life. You can install it yourself without a third party app.

Keyboard buttons are pressed - reboot

Forced reboot is the easiest way to push itself. You need to press and hold the Power and Home buttons together at the same time, for the iPhone 7 you need to hold the Power and Volume down buttons until an apple appears on the screen. Next, release the two buttons while your gadget reboots. iPhone lives its own life and does not respond to pressing - this breakdown is solved!

Fix Sensor Working By Itself Via iTunes

Flashing - a common way to fix the problem with the touchscreen using iPhone recovery, iPad. But all information will be erased, before this action, backup copy done in advance.

Using iTunes, the first thing to do is connect your iPhone to it. And should open home page control your iPhone, iPad. You can see on the top plate with information "Restore" by clicking it. And iTunes automatically updates the device to latest version. After rebooting the iPhone, the screen will stop working by itself.

If all did not help, then you need to contact the service center and replace it with a new display. And I would like to get helpful tips do not hesitate to write to us!

Some happy iPhone owners sometimes have to deal with a rather unpleasant problem - the sensor on the iPhone 5S is buggy. There can be many manifestations and reasons too. But, not the essence of the matter, it is more important to know what to do now.

Sometimes you can do on their own, and in some particularly difficult cases, one cannot do without going to the repair shop. Therefore, in order to decide whether to carry the device for repair or heroically save it on your own, you need to figure out what the problem is and what caused it.

So, the main signs of problems in touch screen iPhone:

• The screen does not respond to touch or only responds in certain areas. This may happen all the time or only from time to time;
• The touch response is delayed;
• The smartphone begins to live its own life: read Chinese blogs, call the Prince of Monaco, and send vulgar SMS to friends, family and boss;
• There are causes for every manifestation, and naturally, in order to troubleshoot, it is necessary to find out why it happened.

Why is the touch screen not working?

If the sensor is completely unresponsive to touch, then this is probably caused by mechanical damage, for example, when falling. It can also be caused by the penetration of water into the case.

But, it is possible that the problem lies in the OS, especially if the screen does not work only partially. Cause of the glitch operating system it may turn out to be a banal failure / temporary freeze or an incorrect update.

Also, a certain program, usually downloaded from an unknown source, can cause a sensor to turn off or malfunction. And, it is not necessary that it is "bad" - it may simply be incompatible with current version axis or, in general, be outlawed by Apple developers.

If the iPhone 6 or 5c suddenly acquired artificial intelligence, and the “rebellion of the machines” took on serious turns, then this is probably the work of a virus. Previously, there was no infection for mobile devices, but those days are long gone. Often this is the "Autoclicker" virus.

If the screen module has already been changed, it is possible that it was installed incorrectly, something was damaged at the same time, or it itself is of poor quality. There are no options - to carry it back to the unfortunate master.

What else can affect the operation of the screen?

• The screen matrix has failed;
• There was a breakdown of one of the parts of the device, for example, the corresponding microcircuit;
• Internal pollution and, as a result, a short circuit

In the latter cases, without professional help indispensable, but in other cases there is a chance to cope on your own.

What to do if the sensor on the iPhone is not working?

The very first working step is to reboot the device. This applies to any electronics. In the case of an iPhone, you need to hold for 10-15 seconds home buttons and inclusions. After that, the device will reboot, and, perhaps, everything will start working.

If it doesn’t help, then more radical methods will be required - a full reset to the factory settings or a rollback latest updates. In this case, all data will be cleared, so you should make a backup on your computer before proceeding with this procedure.

Also, it is possible that dirt has got under the protective film of the screen, especially if it is pasted poorly. Then you need to remove it, wipe it and stick a new one.

Sometimes after a fall protective glass microcracks appear, and air and moisture enter the space between the glass and the screen. An oxide film appears on the touchscreen, and it stops responding to commands or doing it poorly. There are no options here - the glass is removed, the screen is wiped and a new protective surface is put on.

The case may be in the bumper, which sometimes runs into the screen. Therefore, if everything works fine without it, the protective accessory needs to be changed to a more suitable one.

As already mentioned, a certain program can affect the operation of the axis. For example, the Zillow app leads to similar results, especially on the iPhone 5S.

And finally, smartphones do not have a cooling system, so when the processor overheats, for example, on a hot summer day, protection will be triggered that disables the control functionality. Here you just need to turn off the device and let it cool down a bit.

How to prevent?

If all else fails, you will have to go to the nearest workshop. And there they will either make, probably, an expensive repair, or they will offer to replace the device with a new one.

Therefore, it is better to follow simple rules that will significantly reduce the risks of such breakdowns.

For this you need:

1 Protect your smartphone from moisture. Do not leave it near containers with water, use it in a bathhouse or fishing (in any case, be extremely careful at the same time), and also do not talk on it in the snow or rain (moisture will inevitably get into the case or under the screen protection). This is where a headset comes in handy. 2 Needless to say, it is highly undesirable to drop it. For added protection, it's best to carry your favorite toy in a case, even if it doesn't look very pretty. 3 Not all bumpers and protective films perform their functions, and sometimes produce the opposite effect. Dirt gets under a poor-quality film, which scratches the sensor, and an unsuitable bumper itself will abrade the case, and sometimes even interfere with the screen. 4 Do not carry the device without a case in your pocket along with metal objects: keys, small change, key rings, etc.

Conclusion

In some cases, the suggested tips help, but it's safe to say that if the sensor started to work intermittently, then this will probably continue in the future.