Configuring the keyboard in windows 7 on the computer. Setting up a keyboard on a pc

The simplest solution to how to set up a keyboard on a computer is to using WINDOWS.

There are three ways to connect your keyboard to your PC:

You can use a standard PS / 2 connector.
Using a USB port. V in this case the operation of the device will correspond to the operation of a keyboard connected to the PS / 2 port.
Wireless method. It is possible only after starting the system. You can work with the keyboard after loading a special driver.

It is important to remember that the PC must be disconnected from the power supply before inserting the PS / 2 keyboard plug into the computer. Otherwise, you will take out of work motherboard.

Now you can start setting up.

Basic settings in windows 7

It must be remembered that the skills to work quickly on a computer do not come on the very first day. Only over time, gaining experience, the user acquires the speed of typing from the keyboard. Therefore, it will be much more difficult for beginners to set it up than for an advanced user. First of all, you need to understand where the keyboard settings are on the computer.

The standard procedure is:

1. First of all, for more convenience in working with the keyboard, you should correctly perform the following settings: the delay before repeating and the speed of repeating characters. To do this, go to the "Start" - "Keyboard" menu. You will see the "Properties" window, where you can make the necessary initial settings keyboard on the computer.

2. Adjust the keyboard speed. One of the features of the keyboard device is that when you press any of the keys for a long time, the symbol shown on it will be printed on the screen for as long as you keep this key pressed. This parameter is adjusted using the slider. Find "Speed" and set the desired repeat speed options.

As a rule, for beginners, it should be less, and for an advanced user, accordingly, more. Thus, the less experience the owner of the computer has, the longer the delay.

To do this, in the "Repeat signal" section, click "Delay before repeating", where you define the time after which the character you pressed will start to be entered again. Next, in the "Flicker Frequency" section, set the required frequency. For check installed settings a special dialog box of device properties is provided. After making all the necessary changes, click "OK".

3. Setting the language. You need to check which input language is installed on your PC. To do this, load the operating system and look at the language indicated on the layout symbol (by default). To do this, click on the icon language bar... Then click "Options", then "Default Input Language" and "More". Now select the desired language, which will become the default language and click "OK". In case it is specified there English language, change it to Russian.

In the Options section, swipe additional customization: the key with which the Caps Lock will work; which keys are pressed simultaneously to switch languages. Typically, these are the Alt and Shift keys. For additional language settings: hieroglyphs or writing options (from left to right), click: "Start" - "Control Panel" - "Switch to Classic View" - "Standards". Next - "Language" - "Text Input Services", then "Details", and then make the settings.

4. It is also necessary to configure the mouse parameters: click "Mouse", then the "Pointer Options" will appear, where you need to specify the desired speed of the cursor movement. If you have poor eyesight, you can connect a special option that allows you to display the trail from the pointer. If you have a laptop, you should configure the touchpad settings. It is important to remember that you will be able to see them in the "Mouse" section only after installing certain drivers.

5. While working with a computer, connect “ClearType”: go to the “ClearType Settings” item, check the “Enable” box, now you can run the settings to select the desired text display method. This option perfectly improves the image quality of the text.

How to reset your computer to factory settings, read this article. How to set up a tp link router - here.

Differences in setting windows XP

Customization windows keyboard XP differs insignificantly, so we will only point out the differences: The key combination used to switch the language is configured in windows xp on the control panel as follows: "Start", "Control Panel", "Regional and Language Options". A window will open, in it find "Languages", then "Details". Another window will pop up in which you need to disable CAPS LOCK and change the keyboard shortcut by clicking "Change shortcut", then select required keys and click "OK".

If the keyboard refuses to work

How to set up your keyboard to windows computer 7:

1. If the keyboard is not recognized by the operating system and the special indicators do not light up, this means one of two things: either the keyboard is disconnected from the power supply, or it is simply faulty. To fix these problems, connect the device to PS / 2 and USB (no adapters). If the keyboard still won't work, then it might be defective or the cable is damaged. This problem may be the result of a discharge or lack of power supplies in it.

2. If the keyboard is faulty only in windows 7, and before that it worked fine. It does not function due to system failures, the reasons may be: the keyboard is blocked by software, a virus has entered, driver malfunction, registry changes, or problems with system files.

If this started some time after the installation of the system, you need to remove its driver. To do this, click "Device Manager" on the control panel. In the list that opens, click "Keyboard", open its menu, then select "Delete." Restart your computer. Customizing the keyboard in windows 7.

Rest windows problems 7 can be fixed using system recovery: click "Start", then open all programs ("Accessories", "System Tools", "System Restore"). Now select the desired control point set before the failure. Be sure to wait until the recovery is complete.

Thus, all changes: installation, registry and software settings, updates operating system will be canceled and anything that caused the keypad to be locked will no longer be in effect. If the problem arose due to a virus, an antivirus will help you.

3. The operating system does not see the keyboard and recognizes it as an unknown device. Usually, this happens with non-standard models that have their own driver. In this case, use the driver installation from the disk supplied with the keyboard or on the manufacturer's website.

Read also: - To create a gmail account means to discover the world of Google - A program for adjusting the sound on a computer - tips and tricks - How to set up a printer on a computer - How to set up Skype on a computer - Remote computer setup - what is included in the list of services? - How to set up sound on your computer

← Back

domaster.su

Secrets of customizing the keyboard on a computer

It is not enough to connect an input device; you also need to know how to set up a keyboard on a computer so that you can work with it as comfortably as possible. In our guide, you will learn which hardware parameters are best to set, and how this will affect the operation of the system.

Equipment setup

In a small instruction on how to connect a keyboard to a computer, we have already considered some issues of setting up this input device, but there the regulation of operating parameters was only touched on in passing. Let's take a closer look at the hardware setup stage and see how you can slightly change the configuration of the connected keyboard.

Basic setup

Let's start with the basic parameters that can be configured in the "Keyboard" section of the "Control Panel".

Let's start with the first tab - here you can see several sliders that are responsible for the speed of typing a repeated character and the frequency of the cursor blinking.

Using the Delay Before Repeat Start and Repeat Speed options, you can specify how quickly identical characters repeat when you press and hold a key.

You can check the set parameters in a special line. The frequency of the cursor blinking is also shown here, which you also set manually - from complete immobility to high-speed blinking.

With the "Equipment" tab, everything is simpler: here the connected devices are displayed, for which you can view or change the properties.

In the properties of the keyboard, you can:

View device status (working normally).
View driver details, update or uninstall.
Assign some power options - specify that the keyboard can wake up the computer from sleep mode.

The last opportunity is not in all windows versions, however, it does not have a determining value, so you should not worry about this.

language and regional standards

Pressing a key only sends a specific signal to the computer. The keyboard driver is responsible for interpreting it. Therefore, it is so important to configure the layout, which is a set of rules for interpreting the received signals.

The available layouts that correspond to the alphabet of a particular language are displayed in the notification panel. Sometimes users are faced with the fact that the layout is not visible; in this case, you need to restore the language bar on the taskbar.

Right-click on the language bar and select "Options" (or launch the "Run" menu from "Start" and enter the command "control intl.cpl, 2").

The Regional and Language Options window will appear on the Languages and Keyboard tab. You are interested in the "Change" button here - click on it to start configuring the input device parameters.

A new dialog box will open in which you will see three tabs. Let's see in detail what settings are in each of these sections.

Are common

The line "Input language" indicates the layout that is automatically installed when the computer starts. You can install any of the available languages by selecting it from the drop-down list and clicking the "Apply" button.

On the same tab, you can set an additional layout. Click the Add button and select a language. Expand it, specify the input method and click "OK".

Using the "Show" button, you can open a virtual keyboard image with a new layout to see which button will be located where.

The system now has three layouts that you can switch between. To get rid of the excess, select it and click the "Delete" button.

To save the changes, be sure to click the "Apply" button. Then you can go to the next tab.

Language bar

Here you can adjust the settings for the language bar - a small window that allows you to see which layout is installed and change it if necessary. There are not so many options for customizing the language bar. It can be hidden, pinned to the taskbar or placed on the desktop, where you can move freely.

It is convenient when the language is displayed on the taskbar, so it is recommended that you select this option.

The remaining parameters are responsible for some features of the display of the language bar. You can leave them unchecked by default or experiment a little - they do not carry any functional load.

Switch keyboard

On this tab, you can configure the order in which the Caps Lock mode is turned off, in which all letters entered in the text are printed as capital letters. The mode is turned on only with the Caps Lock key, but you can turn it off, for example, by pressing the Shift key.

If you are not comfortable with switching the language, change the function keyboard shortcut.

Click the Change button.

Set a convenient combination and click "OK".

Please be aware that language and layout are not always the same. Multiple languages can be on the same layout, so function key combinations must be assigned for both cases.

Keyboard problems

We figured out the setting, but there is one more important point- correction of possible problems. Most often, users face the following problems:

The system doesn't recognize the hardware, or the input device just doesn't work.
Wrong characters are printed when typing.
Individual keys or their functional combinations do not work.

This is the most general description problems, however, it covers the vast majority of special cases, so you can definitely find a solution for yourself here.

Hardware and system problems

The system does not respond to pressing the buttons, the indicator lights on the keyboard do not light up - these are signs that the device is not connected correctly.

Make sure the connection is made to a known working connector. Try installing another device in it.
Make sure the equipment plug is fully inserted into the connector. Also check the cable itself - it may be damaged.

Try connecting the keyboard to a TV or, for example, a tablet - if the device is detected and works fine, then the problem lies in the computer.

If the keyboard worked for a while, and then the system stopped detecting it, try simply restarting the computer. The next step is to reinstall the drivers.

At the next startup, the system should automatically detect the presence of a new connected device and install it. Do not forget to install the drivers if they are supplied on a disc or are distributed through the manufacturer's official website.

Sometimes the reason incorrect work connected equipment becomes a virus infection of the computer. Scan the system for threats and neutralize them.

Problems with keys and their combinations

If, when typing, you see on the screen the wrong characters that you are typing, then most likely the keyboard is dirty or there is liquid inside its case. You can use a special small vacuum cleaner or a can of compressed air to clean the input device.

The economical option is to flip the keyboard upside down and gently tap one corner on the table. If you have never done this before, you will be unpleasantly surprised by the amount of various rubbish that will end up on the table.

The functionality of the keys can be checked using special online tests - for example, Key Test.

If the keyboard shortcuts that you have set in the keyboard settings do not work correctly, make sure that no applications for controlling input devices have been installed or correctly uninstalled on your computer.

Often users put similar applications to assign convenience combinations and then forget about them or simply delete them incorrectly, thus confusing the hardware configuration.

To make sure that it is exactly third party application affects the performance of functional combinations, boot the computer into safe mode and check the keys.

mysettings.ru

Setting up the keyboard on laptop and computer

Vladislav Nikitin 2012-12-24 windows 7, Computer and user

Setting up the keyboard on a laptop and personal computer in principle, it does not differ and depends on the operating system: windows XP, windows Vista or windows 7, 8, 10. In fact, only the "WAY" differs, by which the keyboard properties are called for further settings.

The keyboard is configured in the Keyboard Properties dialog box. In windows 7: Start> Control Panel> Keyboard.

Keyboard Properties - Click to Enlarge.

Keyboard properties in other windows operating systems are opened either through the control panel or by selecting the Properties item in the context menu of the indicator on the Display Panel.

In windows 7, the keyboard properties window has two tabs: Speed and Hardware. Nothing can be configured on the Speed tab. Only for those who, by the nature of their activity, type a lot of texts, it makes sense to set the minimum delay before repeating characters and the maximum speed of their repetition. Both of these options affect how fast characters are entered when a key is pressed and held for a long time.

Keyboard customization

On the Hardware tab, you can check the "state" of the keyboard.

In order to configure in windows 7 - Language and its display in the tray, you need to go to: Start> Control Panel> Clock, Language and Region> Regional and Language Options> in the window that appears, on the "Languages and Keyboards" tab, click - Change keyboard.

Or just right-click on the display of the current language and click - Options, the following menu appears:

Using the tab "Languages and text input services", you can create different language layouts on your computer. Usually two are used: for Russian and English. Those who work a lot with other languages, for example German, can additionally install support for the German language. In this case, switching between languages will become more difficult - you will have to iterate over the layouts in turn.

The pre-windows 7 keyboard properties window has two tabs: Speed and Language. Nothing can be configured on the Speed tab. Only for those who, by the nature of their activity, type a lot of texts, it makes sense to set the minimum delay before repeating characters and the maximum speed of their repetition. Both of these options affect how fast characters are entered when a key is pressed and held down for a long time. Using the Language tab, you can create different language layouts on your computer.

To add support for an additional language, click Add and select the desired language from the drop-down list in the Add Language dialog box. Previously, this setting required the obligatory presence of a distribution CD with the operating system - at the end of the operation it was required to insert it into the drive, now everything is simple, add it, clicked apply and you're done.

One of the layouts should be assigned as the default. Despite the fact that in Russian we type more texts than in English, still make the default English. This will not at all interfere with the typing of Russian-language texts, but it will save you from incorrect reproduction of characters in some programs made by domestic programmers (very rarely).

By the way, if you come across such a defect, you will know how to quickly fix it.

Choose one of the two possible ways switch layouts: either by the combination of keys ALT on the left + SHIFT, or CTRL + SHIFT, in the tab - switch the keyboard.

Please note that both of these methods work stably. There are, of course, special programs that allow you to switch layouts much more conveniently, but they need to be checked and tested. If a long-used program suddenly starts to behave strangely on your computer or stops working altogether, ask yourself: "Have I installed some wonderful keyboard switch recently?"

The last thing to do is check the box - Display language indicator on the taskbar, in windows 7 - Docked in the taskbar.

With its help, you can switch layouts with the mouse (although it is more convenient to do this with the keyboard), but this is not the main thing. The main thing is that you will always see the state of the keyboard. When entering passwords that do not appear when typing, it is very helpful to keep an eye on the layout indicator.

P.S. The two easiest ways to download music and movies in contact.

abisab.com

How to adjust keyboard settings in windows 7

The mouse is the most comfortable device manual control, but it is very inconvenient to use for data entry. The most convenient and efficient device manual input data for most programs is the keyboard.

Before using the keyboard, the first step is to set up the language selector. Many people have to deal with both domestic and foreign materials, which requires the input of both Russian and foreign characters. In particular, regardless of the park of programs used, to work with command line and to indicate Internet addresses, Latin characters are required.

Keyboard layout

When a key is pressed, an electronic signal is sent to the computer. The question of its interpretation, for example, conversion to a character code, is decided by the operating system according to a certain set of rules. This set is commonly referred to as the keyboard layout. Logically, each keyboard layout is represented by a software service in the operating system. So, for example, installing the German language layout means: installing a software service that interprets the signals from the keys as German characters.

It is clear that different languages correspond to different keyboard layouts, but even one language can correspond to several different layouts. If necessary, layouts can be quickly changed in the course of work - for this, the operating system provides tools for switching layouts.

Of course, a computer that is operated in Russia needs a Russian keyboard layout. It is equally necessary to have an English ("American") layout, without which there is nothing to do on the Internet. It is also important to be able to work with English-language programs, even if you usually do not use them.

To check which keyboard layouts are present (installed) on your computer, double-click the Regional and Language Options icon located in the Control Panel window (Start Control Panel). Writing drawing icon. Select the Languages tab and then click the More button to open the Languages and Text Input Services dialog box with a single Settings tab. If the required layout is not on the computer, then you need to install (add).

Installing an additional keyboard layout

Open the dialog box for setting keyboard properties: Start - Control Panel - Keyboard.
To add a new layout, click the Add button - the Add Input Language dialog box will open.
In the Language drop-down list, select the language that corresponds to the added keyboard layout.
The specific layout is set in the Keyboard Layout or Input Method drop-down list. When choosing an English-language layout, you should specify the option: USA.

Many are attracted by the US-international option, but it is better not to use it. This layout is for Western Europe. In it, some two-character combinations are automatically converted to letters with accents... Such a transformation is hardly necessary in our country, and it can lead to misunderstandings.

Switching between keyboard layouts is often required "ON THE STROKE" while working with a program or document. This can be done using the keyboard or the MOUSE, but the keyboard is more convenient. The key combination used to switch layouts must be preset (selected).

Language bar

The language bar allows you to switch the keyboard layout using the mouse. It is enabled by default and is located on the Taskbar next to the display panel ("minimized"). The panel can be placed in an arbitrary place on the Desktop ("expand"). It contains an indicator showing the current keyboard layout.

Current language indicates a button with a two-letter designation. To select a different language, click on this symbol and select the desired language from the menu that opens.

The language bar makes it easy to follow current layout, but it is not very convenient to switch it. It is still easier to change the layout using the keyboard.

To customize the language bar, right-click on it. The configuration commands are available in the context menu, the content of which depends on whether the language bar is collapsed or expanded.

If the language bar becomes a hindrance, you can close it. To do this, click the Language Bar button in the Languages and Text Services dialog box. Select the Turn off additional text services if unchecked check box.

When actively working with several documents, it sometimes seems that the keyboard layout switches by itself. In fact, this is not the case. It's just that the operating system very strictly monitors in which window which layout is set. The layout can automatically change when switching from one program to another, because the command to select the layout affects only the active program.

xn ---- ttbkadddjj.xn - p1ai

How do I customize the keyboard on my computer?

The keyboard is one of the most important devices entering information into a computer. For example, without a mouse, you can work with a PC, but without a keyboard, it will not work. The serial keyboard interface is usually connected to a special controller located on the motherboard.

It is very important to know how to configure the keyboard on a computer, since the convenience of working with a PC depends, first of all, on the keyboard settings. The keyboard can connect to your computer in three different ways:

Standard PS / 2 connector. Never insert a device plug into the PS / 2 while the computer's power is on. This can disable the motherboard.
USB port. A keyboard that is plugged into a USB port works in almost the same way as a keyboard plugged into a standard PS / 2.
Wireless keyboard connection. This method of connection assumes that it will work after starting windows. After starting the operating system, the driver is loaded wireless connection, and the keyboard is ready to use.

After connecting the keyboard, you should start setting up.

How to set up a keyboard on a computer - basic option

To start basic setting keyboard, you need to go to the "Start" / "Control Panel" menu. Then select the Keyboard tab. Next, the "Properties: keyboard" window will open. In this window, you can make some basic settings.

Adjusting the speed

The keyboard is designed so that when pressed for a long time a specific key the symbol depicted on this key will be displayed several times until you release the key. This setting can be adjusted using the slider in the Input character repeat section. The section "Delay before the start of the repeat" sets the time after which the pressed character will be played again. The keyboard properties dialog box contains a text box in which you can try out your settings.

Use the Repeat Speed slider to set the amount of time to delay before starting to repeat playback of the pressed character. The section "Cursor blinking frequency" determines the blinking frequency of the cursor symbol on the screen. By moving the slider to the right / left, you set this parameter. After making the changes, click "OK".

How to adjust language settings

To determine which language will be used by default on the system, you must right-click on the language bar icon. We select: taskbar / "Options" / item "Default input language" - in this tab select the required language that will go to the OS by default.

Pressing the "Keyboard Options" button configures Extra options keyboard: which key will enable / disable Caps Lock, which key combination will switch between languages (usually Alt left + Shift is used).

How to put on a laptop alarm clock windows 7

As you know, most PC and Mac computers or laptops use standard keyboards with predefined key layouts and language layouts. For many users, for example, when changing the operating system or the equipment itself, it is quite difficult to get used to the new position of the buttons. In this case, you can reassign so that they match the layout that the user is used to. But most often this applies only to those situations when, when entering text, the user does not look at the characters, but applies the so-called

Why do you need to remap keys on a keyboard?

But the matter is not limited only to the above situations. Quite often, you can also find cases when on a computer or laptop some key is out of order.

In the case of standard equipment in the form of PS / 2 keyboards, the issue is solved quite simply by buying a new one. But what to do if a laptop breaks down - not a cheap pleasure. Here, as an alternative, you can simply reassign the keys on the keyboard, abandoning rarely used buttons. However, even more primitive situations can be encountered when it is necessary to change the combinations corresponding to switching languages and layouts.

How to change the keyboard shortcut: Windows tools

To begin with, let's consider the simplest option associated with language layouts. By default, all recent Windows systems use left Alt key combined with Shift to change the language. But many users prefer to change the language and layout using the Ctrl / Shift combination, considering it more convenient.

To change the switch, you must use the standard "Control Panel", in which you select a section of language (Windows 10) or languages and regional standards (Windows 7, for example). Next, you go to the additional parameters and select to change the keyboard shortcut of the language panel by pressing the corresponding button in a new window, after which the Ctrl / Shift combination from the list is simply indicated.

Basically, you can remap the keys for changing a symbol or action using a small keyboard and mouse program, Layout Creator, which you can download directly from Microsoft. After starting the application, it is enough to select a list of all actions, and, if necessary, change them for each individual button until the keys are completely disabled. Here you can also change the purpose of the operating keys like Shift, Alt, etc.

Reassignment via the system registry

You can also reassign the keys on the keyboard using a more complex method without using third-party utilities, using the settings and parameters of the system registry, the editor of which is called by the regedit command via the Run console.

Here you need to find the KeyboardLayout directory in the HKLM branch through the SOFTWARE directory. Here you will have to create string parameters indicating the button codes for reassigning from one key to another. The process is quite laborious, so it will not be useful to most users, since without knowing the reassignment, disablement codes and the order of entering characters, it will be quite problematic to perform such operations. It's just that the technique is provided for a general understanding that this can also be done in the registry.

MapKeyboard

This program allows you to remap keys on your keyboard as quickly and easily as possible. After the start of the utility, you will see screen keyboard.

Let's say you want to reassign a button or Shift. On the (virtual) keyboard, press the desired button, through the Remap selected key line, select new symbol or another key operation, and then save the settings by clicking the Save Layout button. Upon completion of all actions, a system reboot will be required.

SharpKeys

Before us is another simple program... The procedure is almost the same as in the previous case. First, the (Add) key is added, then a new character or action is selected from the list (complete shutdown - Turn Key Off), after which the changes are saved by pressing the Write To Registry button, and then, again, a complete system restart is performed.

The only and most important problem of this utility is that it does not work with and the reassignment of Cyrillic characters must be done using their counterparts in the English layout.

MKey

Finally, one more small application (this time in Russian) that allows you to remap any button and even change the standard combinations or set your own combinations.

As usual, the original key is added first, then the keystroke emulation string is used, a letter or action of another key is selected from the list, and the changes are saved by clicking on the button with the diskette icon. By the way, this program compares favorably with the two previous ones in that it allows not only reassigning the keys, but also can be used when setting up various kinds of manipulators, gamepads or actions with software players.

Conclusion

That's it for the remapping operations. In principle, depending on the situation, the system's own tools can also be used. In the literal sense, you can only reassign standard combinations that are initially included in the OS parameters. If not use third party utilities, you will have to deal with system registry but this is difficult enough. Therefore, if the question arises of quickly carrying out all the necessary operations, it is still better to give preference to the applications described above. And the MKey program (short for Media Key) in this respect looks more convenient in all respects, only it constantly "hangs" in the system tray. But its resource consumption is minimal, so this will not affect the performance of a computer or laptop.

For comfortable use of the keyboard on a laptop, it must be configured correctly. This can be done with several in simple ways, each of which allows you to edit specific parameters. Below we will take a closer look at each of them.

Unfortunately, the standard Windows tools do not allow you to configure all the parameters required by the user. Therefore, we suggest that you consider several alternative methods. Before starting work, you will need to turn on the keyboard if you are using an external device instead of the built-in one. For more information on performing this process, read the article at the link below.

In addition, it is also worth noting that sometimes the keyboard on a laptop stops working. This can be caused by hardware failures or incorrect configuration of the operating system. Our article on the link below will help you solve them.

Method 1: Key Remmaper

There are a number of special programs that allow you to customize and remap all keys on your keyboard. One of them is the Key Remmaper. Its functionality is focused specifically on key replacement and locking. Work in it is carried out as follows:

Method 2: KeyTweak

The functionality of KeyTweak is very similar to the program discussed in the previous way however, there are some significant differences. Let's take a closer look at the process of configuring the keyboard in this software:

There are several more different ways remapping keys in the operating room Windows system... You can find out more about them in our article at the link below.

Method 3: Punto Switcher

The main purpose Punto switcher is the correction of errors in the text and its optimization. There are several more representatives of such software, and you can familiarize yourself with them in more detail in the article at the link below.

Method 4: Standard Windows Tools

The main parameters of the keyboard are configured using standard tools operating system Windows. Let's take a closer look at this process step by step:

Right click on the language bar on the taskbar and go to "Parameters".

In the tab "Are common" you can specify the default input language and manage installed services. To add new language, click the appropriate button.

Find the required languages in the list and mark them with checkboxes. Confirm your selection by clicking on "OK".

In the same window, you can view the layout of the added keyboard. The location of all symbols will be displayed here.

On the menu "Language bar" specify a suitable location, customize the display of additional icons and text labels.

In the tab "Switch keyboard" a hot key is installed to change languages and disable Caps Lock. To edit them for each layout, click on Change keyboard shortcut.

Install hotkey to switch language and layout. Confirm the action by clicking on "OK".

In addition to the above Windows settings allows you to edit the parameters of the keyboard itself. This is done as follows:

Method 5: customize the onscreen keyboard

In some cases, users have to resort to an on-screen keyboard. It allows you to type characters using your mouse or any other pointing device. However, the on-screen keyboard also requires some adjustments for ease of use. You just need to do a few simple steps:

How do I connect a keyboard to my computer? How do I make basic keyboard settings on my PC? How do I customize the language bar on my computer?

The keyboard is one of the most important devices for entering information into a computer. For example, without a mouse, you can work with a PC, but without a keyboard, it will not work. The serial keyboard interface is usually connected to a special controller located on the motherboard.

Standard PS / 2 connector. Never insert a device plug into the PS / 2 while the computer's power is on. This can disable the motherboard.
USB port. A keyboard that is plugged into a USB port works in almost the same way as a keyboard plugged into a standard PS / 2.
Wireless keyboard connection. This method of connection assumes that it will work after Windows startup... After starting the operating system, the wireless driver is loaded and the keyboard is ready for use.

After connecting the keyboard, you should start setting up.

How to set up a keyboard on a computer - basic option

To start basic keyboard configuration, you need to go to the "Start" / "Control Panel" menu. Then select the Keyboard tab. Next, the "Properties: keyboard" window will open. In this window, you can make some basic settings.

Adjusting the speed

The keyboard is designed so that when you press a certain key for a long time, the symbol depicted on this key will be displayed several times until you release the key. This setting can be adjusted using the slider in the Input character repeat section. The section "Delay before the start of the repeat" sets the time after which the pressed character will be played again. The keyboard properties dialog box contains a text box in which you can try out your settings.

How to adjust language settings

When you click the "Keyboard Settings" button, additional keyboard settings are configured: which key will enable / disable Caps Lock, which key combination will switch between languages (usually Alt left + Shift is used).

To configure additional support for languages (letters from right to left, hieroglyphs), you need to enter the menu "Start" / "Control Panel" / "Switch to classic view" / "Language and Regional Standards", then click "Language" / "Languages and services text input "/" Details "and make the necessary settings.

Setting up the keyboard is not difficult, but it is still recommended to do it. The comfort of communication with the computer will depend on the settings made, so pay due attention to this point.

You still don’t know how to configure hotkeys on Windows 7, and why do you need them? Hotkeys on Windows 7 are necessary for the usability of the operating system. They help to quickly perform various operations on the computer by pressing a certain combination.

The operating system contains a built-in database of such commands, they are used by default. Some of them can be changed programmatically or assigned independently.

How to find a list of hotkeys

A list of keyboard shortcuts for quick control of the OS is available in help system Windows. You can find out the entire list of Windows 7 hotkeys by calling the MS Office Help window with the Win + F1 keyboard shortcut.

Remember that you need an Internet connection to use the Help.

Further from the list that issued search system, you can select an item of interest, for example, "Hotkeys and shortcuts." A website page will open in the browser, which contains descriptions of frequently used keyboard shortcuts.

Method two: you can find hotkeys on a laptop with windows 7 using the built-in Help and Support. In this case, no internet connection is required. Help is called in the "Main Menu". Then necessary information is selected from the list by the request "Keyboard shortcut".

If you select the "Keyboard shortcuts" section through "Help and Support", you will receive all the necessary information. Descriptions of all possible combinations of hot buttons are sorted by topic, which makes it easier to search.

The keys are for quick search and editing texts in MS Office, performing any operation on the desktop without using a mouse, calling and closing the program and other commands specified by the user. All described keyboard shortcuts are configured by default.

The default button combinations allow you to manipulate OS objects. Windows 7 classified hotkeys:

SHIFT + DELETE allows you to delete files with hard disk without placing in the "Basket";
ALT + F4 or Ctrl + W closes the active program or file;
Ctrl + Shift + Esc brings up the task manager;
Win + F opens a search window;
Win + L locks the computer;
ALT + TAB lets you navigate from one open file or windows to another;
CTRL + Mouse scroll wheel allows you to resize the icons on the desktop;
Win + G places gadgets on top of open windows;
Win + Home allows you to minimize windows except for the active one;
Ctrl + P submits documents for printing;
Win + X calls the "Mobility Center" on the laptop;
Win + M minimizes open windows;
Shift + Ctrl + N allows you to create an empty folder.

How to assign hotkeys

Windows 7 hotkeys are usually configured for programs that are frequently used by the user. Hotkeys are assigned through the "Main Menu" or a shortcut to "".

It is not difficult to assign hotkeys for Windows 7, for this you need to go to the "Properties" section of the selected program through the shortcut on the "Desktop" or "Main Menu". In the "Shortcut" tab, the cursor is placed in the line " Quick call". When pressed at the same time CTRL keys or ALT and the required letter of the Latin alphabet, the combination CTRL + ALT + the selected letter is specified.

Please remember: if the used combination was previously assigned as a default by the system, after making such a setting, you can change the hot windows keys 7.

After pressing the assigned keyboard shortcut, it will open preset program instead of the previously performed default action.