Installing Windows XP to modern iron is often conjugate with some problems. When installing "rolls out" various errors and even bsods (blue screens of death). This is due to the incompatibility of the old operating system with equipment or its functions. One of these errors is bsod 0x0000007b.
Blue screen With such a code, it can be caused by the absence of the built-in AHCI driver SATA controller, which allows various functions For modern drives, including SSD. If your motherboard uses this mode, then Windows XP will not be able to install. Consider two methods to eliminate the error and analyze two separate private events with Intel and AMD chipsets.
Method 1: BIOS Setup
Most motherboards have two SATA drive modes - AHCI and IDE. For normal windows installations XP You must enable the second mode. It is done in BIOS. You can go to the motherboard settings by pressing the key several times. Delete. When loading (AMI) or F8. (Award). In your case, it may be another key, it can be found out by reading the manual to the "motherboard".
The parameter we need, mostly, is on the tab with the title "Main" and called "SATA CONFIGURATION". Here it is necessary to change the value with "AHCI" on the "IDE"Press F10 To save the settings and restart the car.
After these Windows XP, it is most likely to be installed normally.
Method 2: Adding AHCI Drivers to Distribution
If the first option did not work or in the BIOS settings, there is no possibility of switching SATA modes, then you will have to manually integrate the required driver to the XP distribution. To do this, we use the NLITE program.
- We go to the official website of the program and download the installer. It is exactly the one that is highlighted in the screenshot, it is intended for the distributions of XP.
If you are going to integrate, working directly in Windows XP, you must also install Microsoft .NET Framework 2.0 from the developer's official website. Pay attention to the discharge of your OS.
- Installing the program will not cause difficulties even at the newcomer, just follow the prompts of the wizard.
- Next, we need a compatible driver package, for which it is necessary to find out which chipset is installed on our motherboard. You can do this using the AIDA64 program. Here in the section « Motherboard»
, tab "Chipset" There is a necessary information.
- Now go to the page on which packages are collected, perfectly suitable for integration with NLITE. On this page, choose the manufacturer of our chipset.
Download package.
- The archive that we received when loading must be unpacked in a separate folder. In this folder we see another archive, the files from which also need to be removed.
- Next, you need to copy all files from the installation disk or image to another folder (new).
- Preparation Completed, launch the NLITE program, select the language and click "Further".
- In the next window, click "Overview" And choose the folder to which files from the disk copied.
- The program will check, and we will see the data on the operating system, then click "Further".
- The next window simply skip.
- The following action is the choice of tasks. We need to integrate the drivers and create boot image. Click on the appropriate buttons.
- In the driver selection window, click "Add".
- Select item "Driver Folder".
- We choose the folder into which we unpack the downloaded archive.
- Select the version of the driver's desired bit (the system that is going to install).
- In the Driver Integration Settings window, select all items (click on the first, clamp Shift. And click on the latter). We do it in order to be confident that necessary driver Present in the distribution.
- In the next window we click "Further".
- Run the integration process.
- Select mode "CREATE Image", Zhmem. "Create ISO", choose a place where you need to save the created image, give him a name and click "Save".
- The image is ready, we leave from the program.
The resulting file in ISO format must be recorded on the USB flash drive and you can install Windows XP.
Above, we looked at the option with the Intel chipset. For AMD, the process has some differences.
Conclusion
We disassembled two ways to eliminate the 0x0000007B error when installing Windows XP. The second may seem complex, but using these actions you can create your own distributions for installation on different iron.
The blue screen of death is a generalized concept, which is characterized by the fact that when installing or operating Windows, the blue screen appears sharply with different inscriptions, as a result of which further actions with the operating system becomes impossible. Below it will be about how to be in a situation where a blue screen appears on the computer during the installation of Windows XP.
The problem when you install a blue screen when installing Windows XP, does not give any specifics, which means that theoretically, the problem can cause a variety of factors. Below we will look at how you can independently determine the cause of the problem, as well as what major reasons can provoke it.
Not knowing the error code, it is quite difficult to assume the reason for the blue screen. Therefore, carefully examine the data on the blue screen, in particular, you should be interested in the error code.
Finding an error code, use any search engine in the browser to clarify the cause of the problem, and therefore, to approximate which way to watch. The following recommendations will go in cases where you find it difficult to understand what caused the problem.
Cause 1: Driver Incompatibility with Windows XP
First of all, if you are a user more or less new computer or laptop, then you may encounter the fact that in your case there could be incompatible in the drivers for your hard disk With the Windows XP operating system, which, by the way, is strongly outdated, and completely stopped supported by Microsoft.
In the event that your hDD It has a modern SATA connector, then the problem can be enjoyed to eliminate, switching to the BIOS to IDE mode, which will ensure compatibility between hard disk and Windows XP.
To do this, send a computer to a reboot (or simply turn on) and at the earnest switching stage, start clicking on the BIOS entry key. As a rule, in most cases in hot key Can perform F1, F2 or DEL.
Entering the BIOS, you will need to find the mode responsible for changing the SATA mode. IN different versions BIOS It can be located and called differently, in our case the setting you needed in the section "INTEGRATED PERIPHERALS".
In it we found the option "Onchip Sata Type"By clicking on which, we are invited to select the desired parameter (we are interested in IDE). Save tincture, we leave from the BIOS and try to install Windows XP again.
Reason 2: Outdated Windows XP Build
Old builds of Windows XP do not include updated versions Drivers that can support devices that have released many later than this version of the operating system. In this case, you will need to try to search online another Windows XP assembly, which includes updated versions of drivers.
Cause 3: Availability of malfunctions in a disk device
Sustain this problemShe is much more serious because it implies a problem in the hard disk.
Check it easy - try installing more modern version Windows, for example, 7 or 10. If new windows version They do not want to get up, the problem can really go in malfunction of disk devices.
To begin with, you will need to look under the system unit housing (laptop) and check the connection of the loops of your hard disks. If everything is connected normally, you should check the rigid sectors and, if necessary, perform treatment. To do this, there is a diverse selection of programs that can work both from under Windows and in your own environment, for example, it is worth highlighting a program. HDD Regenerator..
If, according to the results of the tight disc check, it was revealed a large number of Bad sectors, there is a chance that your hard drive has failed. You can check this by connecting another hard disk to the computer and trying to install the operating system already on it.
Cause 4: RAM issues
Often the blue screen of death when installing the operating system signals problems in random access memory. You can make sure that you can verify the operational memory for errors.
To do this, you need to download the program computer. memtest86.. In the screenshot, you can see what program file you will need to download.
Make blood flash drive with the program. You can write it in any program to create loading media, for example, Ultraiso..
Once the record is completed, you will need to connect a flash drive to a problematic computer and log in to the BIOS by setting a flash drive (or disc) as the main bootable media.
After running from the bootable media, the utility window will appear on the screen, after which the utility automatically, without any additional actions on your part, will start scanning RAM. Test Status You can see near the item "Test".
In the event that, according to the test results, the utility will detect errors in the operation of RAM, they will be highlighted in red. If you confirmed the problem, you will need to carefully examine the memory surface - if the contacts are contaminated, then cleaning with an ordinary natural cavity can help solve the problem. In more serious cases, the problem module will be replaced.
Actually, these are the main reasons that may affect the inability to install Windows XP. We hope these recommendations helped you perform the normal installation of the operating system.
Operational windows systems XP and 7, despite the termination of official support from Microsoft, and satisfied powerful advertising campaign Regarding dozens, continue to occupy leading positions in the market of operating systems. Their reliability is checked for years and proved by millions of contented users. However, even when using them, errors that interfere with full work may occur.
One of them is an error 0x0000007b, as a result of which the so-called blue screen of death appears, the computer does not respond to your actions from the word "at all." The only output is rebooting, but it does not help in such cases. Most often a problem occurs when reinstalling Windows XP or 7, and manifests itself when the system is loaded, although this may occur at other situations. It is noteworthy that the situation can be repeated even on a new computer or laptop.
In this article, we will consider for what reasons an error occurs 0x0000007B when installing Windows XP or Windows 7, as well as all solutions. If you read everything and you will carefully follow the instructions, you will easily fix everything.
In fact, the reasons for which the blue screen arises with the STOP 0x0000007B error, quite a lot. And they all directly depend on what operation at this point you are performing. The only thing between them is generally installed Windows XP, as well as the launch of this version or more new Windows 7. So, what could be the cause of the problem?
When starting the system:
- Damage to important system filesresponsible for starting the system.
- Viruses that can penetrate the system very deeply and affect the operation of the system.
- Physical defect of a hard disk of a computer or error in its work.
- Inserted into a USB connector flash drive.
This is how 0x0000007B error looks like
When installing the system:
- Incorrect installations bios.which is why the failure occurs.
- Incorrect operation of drivers used in the load controller. If they are damaged, the controller simply cannot execute the Windows installation procedure to the end.
- There is no support for the hard disk or the SCSI controller installed operating system. It may be on modern models of computers or laptops, since XP is already considered outdated.
Methods Solutions
During system launch
Run the latest working configuration
Since the failure may be temporary and random, in Windows 7 and XP, it is possible to return to the last working configuration. What does it mean? During operation, the system in a special partition on the hard disk copies the working files responsible for launching the system and its full work. Also, from time to time, an image of the system's working state is created, in which everything works properly. A few such images are stored on the hard disk. Each time you launch a computer, the system automatically selects the latest and over time older settings are removed. Therefore, if a 0x0000007B error occurs when startup, try opening the last workout.
To do this, while running the operating system, press the F8 button to exit the download menu. In order to start this mode for sure, and do not sleep, click the button several times. You will see a list of download options: secure mode, download logging, debug mode and others. You need to select "Last Successful Configuration (optional)". If everything goes successfully, the normal loading of Windows will begin. If this did not happen, this method will not help you, so try one of the following.
Select "Last successful configuration (optional)"
Checking disk on errors
Hard disk - not the most reliable component of your computer, especially if it is not solid. It has moving mechanisms, consists of a magnetic surface and the reading head. If you use a laptop and often work on it directly on the go, perhaps even in transport, there are damage to some sectors of the hard disk. If the sector will be damaged on which the system files needed to work for Windows 7 or XP are recorded, the launch will be impossible. To make sure whether your hard disk with errors is working or any reason is possible, you will need to use the brand utility of the hard disk check. But how to open it if Windows does not start?
Usually such an inspection is quite enough to restore performance. If the disc is damaged so much that the standard windows Could not cope with the problem, try using specialized software for resuscitation of hard drives. If the problems were not detected, but the error 0x0000007B is repeated, try the following method.
Check for viruses
Some malicious files So covers and are dangerous that they penetrate deeply into the Windows system section and damage systemically important components, resulting in an error 0x0000007b. If the previous two ways did not help you, try to check for viruses, downloading the computer in safe mode. Here are step-by-step actions that you need to perform:
When installing Windows XP
Incorrect BIOS settings
The most frequent reason for which you can disturb the error 0x0000007B when installing Windows XP is incorrectly exposed hard drive mode. The fact is that all modern connects interface SATAwhich provides reliability and high speed Data transfer, and uses modern ACHI standard, which allows you to use all SATA features. The Windows XP itself does not support this standard, since in those days it has not yet existed. Accordingly, due to this incompatibility, the 0x0000007B error occurs when Windows XP is installed and the blue screen comes out.
To return efficiency in bIOS settings Place the default IDE mode that will work in SATA compatibility mode. Where is this setting item? How to set the desired parameter?
- Turn on the computer and go to the BIOS. Depending on the manufacturer of the laptop or motherboard of the system unit, the keys, or their combinations that need to be pressed to go to the BIOS, may differ. Most often it is F2, Del, ESC.
- Depending on the type of bios used, the menu location may differ slightly. This is what may need to click:
- Main menu - Advanced - Onchip Sata Type - Native IDE - F10 to save settings.
- Main menu - Advanced - IDE Configuration - Compatible - F10 to save settings.
- Main menu - Main - SATA MODE - IDE MODE - F10 to save the settings.
- After you activate the mode, repeat the installation of Windows XP.
No Driver Controller
Windows XP is known for its assemblies from various programmers who either cut some components to facilitate the image and ability to work even on old and very weak systems, or embed additional software. When using cropped assemblies, you can very often encounter the fact that they do not have the required controller driver, due to which the XP installation is broken and the blue screen is knocked out with an error.
The only correct solution will be the download of another operating system image with an already built-in driver. To do this, you can search another assembly on torrent trackers and carefully read the description.
Conclusion
Now you know how to deal with an error 0x0000007B when installing or launch Windows 7 or Windows XP. We described the most common causes of its occurrence, as well as the most effective methods of solution. If nothing helps did not help, the blue screen continues to pop up, then it is worth thinking about buying a new computer or a laptop or simply completely reinstall the system, download a clean and original image. In the comments, we ask you to specify whether you managed to get rid of the problem on our recommendations.
- In contact with
- ordinary form
BSOD: STOP 0x0000007B - began to appear on one computer very often, even after reinstalling Windows From scratch, most likely it can be suspected that the reasons may be:
1) due to the download of content, where the beautiful button is big to the big download, as a rule, it is also not a fact, everything is masking beautifully under viruses, viruses or remote control In the form of Backdoor - can damage the HDD / SSD boot sectors. IN Manual mode, In the floor automatic or even automatic without the participation of a person on the script. By the way, Windows 7 x64 SP1 suffers this time - this is not some kind of Windows 10, there would be the same if there was a mistake the same. After all, with Windows 7, it was not desirable modifications, or rather too many processes and other services. As a rule, this system for consoles and mobile devices It was created, but for a computer. The only thing that appear visible on the DirectX 12 is some one that essentially does not have the support of most games, even for them there is no point in doing this, a normal company will definitely make a choice in DirectX version Running games like Resident Evil 5 - Run from DirectX 9 and from DirectX 10, 11 even for VR. And not to force only a strict one DirectX such that version, many years ago there was a choice for not many games, even by the way S.T.A.L.K.E.R. - And that could be changed DirectX to the 11th version, it is a call of Pripyat - it is said to be improved to this day.
2) incompatible with video card, audio driver especially most often Realtek AC 97 - For example, it may be downloaded old versionOr downloaded not from the official site, it was only on Windows XP SP2 / 3 - as far as I remember and many years ago.
3) A partially compatible driver on a video card, even so, but very rarely, 1k100, that at first everything will work perfectly. But here the driver on a video card either has the latest version for old card models only, which is incompatible with Windows system kernels and even BSOD can serve. More from experience I know that most often ATI Radeon is not HD version - they suffer even worse from the latest versions of the driver, so Catalyst is recommended - to install latest version. And in the HD series - if the driver is installed, the image shows, but then a few weeks later there is a Windows restart - then it says either the video card itself is already marked already, the chips are not given due images to the data output, or the chips cannot handle the fulfillment that , not before processing. Most often leads to an image at all, but very rarely to BSOD 0x0000007b.
The most important thing. By default, the licensed version of Windows XP / Vista / 7 / is disabled. Windows must be included to study a symptom of a technical error, the error code can be found for the cause. Here is the main problem that it is disabled, few people know about it, so the favorites can receive BSOD error requests - all of the Windows creators - since there is no function when installing Windows - Show error code when Windows YES / NO fails. For this, the base is filled with BSOD - only the favorites and write errors from the experience that only chosen. Favorites repair systems are no less than twice as expensive (in fact, should, since they can correct these errors much better than noob sibot / noob) noob. Kettle and other.
By the way, everything is written here 100% of the truth, personally my experience.
Despite the fact that from the moment Microsoft cessation supports Windows XP has passed more than three years, some users still do not want to part with this operating system. Well, it is understandable - someone still is in the ranks old computer, specifications Which does not allow to establish a newer OS, someone needs a quick system, and someone is simply used to XP, not wanting to change anything for ourselves.
Windows is a fairly stable and reliable system that can work without reinstalling up to several years, but sooner or later it begins to malfunctions, including critical. An example of one of these failures is the STOP 0x0000007B error that occurs at the time of loading / installing the operating system and accompanied by the appearance of the traditional blue "Death Screen". Most often with it have to face windows users XP, however, not insured from her and owners of computers under windows control 7.
The main reasons for the appearance of the blue screen with the STOP 0x0000007B error
Error 0x0000007B, as well as a number of other similar, does not indicate a specific source of the problem, and the code itself may indicate different types of malfunctions. In some cases, it is accompanied by a message Incaccessible_boot_device.that immediately causes the user suspicion of hard disk malfunction. In fact, this error only says that the boot driver cannot initialize the initial loading device, that is, a hard disk.
The appearance of a blue screen with an error 0x0000007B is often caused by the conflict of drivers connected to the PC devices, incorrect BIOS settings, damage to system files, or important registry keys, infection with viruses, presence on the disk of BAD sectors and file system errors, various hardware problems (most often associated with disk), problems with rapid memory, lack of support by the SCSI controller installed by the operating system or hard disk. We will not disassemble all cases in detail, instead we will pay attention to the most common.
What if the error occurs when installing Windows XP
The main and most likely cause of the appearance of an error 0x0000007B When installing Windows XP, the new PCs are incompatible BIOS settings. The fact is that the new computers for the SATA disks connected to the SATA disks use the ACHI standard, which at the time of Windows XP is not yet used. You are trying to install the system, but it cannot find the appropriate driver and throws you to BSOD. What to do? Try changing SATA disks with AHCI on IDE.
Go to the BIOS, in the Advanced section, find the configuration IDE setting, find the SATA Configuration parameter and set it the value Compatible instead of enhanced. In other versions of the BIOS, the designated setting can be located in the Integrated Peripherals section and be called onchip Sata Type or SATA RAID / AHCI Mode. It needs to be installed IDE or Native IDE.
If your BIOS eats a Main section, look in it SATA MODE and install it in mode IDE Mode..
Uploading drivers during installation XP
The next way to eliminate the error is to install the missing SCSI or ACHI drivers during Windows XP installation, but for this you already have a diskette with drivers corresponding to your PC configurations. At the very beginning of installing XP you need to click F6.To install a special SCSI or RAID driver.
But since this method is hopelessly outdated, utilities for writing drivers on a Windows XP disk may not be like a floppy drive in your computer. Alternatively, you can use USB Floppy Drive., Only now the acquisition of this device for the installation of an outdated system is inexpedient.
Integration of SATA AHCI drivers in Windows XP image
If you consider yourself an experienced user, you can integrate SATA AHCI drivers directly to the installation image of Windows. XP. For these purposes you need a utility nLITE, original SATA drivers with AHCI support for text mode (download from the manufacturer of your motherboard) and the Windows XP image itself.
Algorithm of actions Next. Unpack the archives with the drivers and the ISO image of XP into separate folders.
In the next window, click "Add" and specify the path to the folder with the drivers.
Then activate the "Text mode driver" radio button, check the driver you need and press "OK", after which the boot image will be recreated.
If the error 0x0000007B when installing the system was associated with the incompatibility of the drivers, this time it will not arise.
Method worker, but why fool your head, if it is much easier to find the image of Windows XP with already integrated AHCI drivers, the benefit of such assemblies enthusiasts created more than enough!
How to fix the error 0x0000007B when booting Windows 7
As in the case of XP, the cause of Error 0x0000007B When Windows 7 is loaded, the BIOS settings can be incorrect. The drop in the system in the BSOD with code 0x0000007B was often observed after enabled by the user of the AHCI mode in the BIOS, especially in cases where the SSD disk is installed on the PC. No one argues, the AHCI mode has its advantages, but in Windows 7 simple inclusion in BIOS is not enough, before this system needs to be prepared. Therefore, we restore B. BIOS former Settings, load, run the Regedit command registry editor and deploy this branch:
HKEY_LOCAL_MACHINE / SYSTEM / CURRENTCONTROLSET / SERVICES / MSAHCI
In the right part we find the parameter Start. And change its value to 0.
The same is done with the START parameter in the key HKEY_LOCAL_MACHINE / SYSTEM / CURRENTCONTROLSET / SERVICES / IASTORV.
After that go to the BIOS and turn on AHCI. This time the system should boot without an error. Upon restarting, the corresponding disk drivers will be installed in the system. At the same time, we also recommend opening the Device Manager and check in the disk properties, whether the caching of the record is turned on.
Other causes of error 0x0000007B
The reasons for the error 0x0000007B below, as well as the ways to correct it are applied to both Windows 7 and Windows XP. If before this system loaded normally, but after upgrading or installing some driver during the next windows downloads Gave an error 0x0000007b, probably the reason for the driver's incorrect operation. To begin with, try to boot with the last successful configuration, for which immediately after turning on the PC hold F8. and select the appropriate option.
You can also try to boot in safe mode and remove the installed software. If this does not help, roll back to the previous recovery point if the download in safe mode will be available. In Windows 7, everything is easier, in this system you can roll back to the control or complete backupBy booting from the installation disk with a distribution.
Errors on disk
File system errors, failure sectors can also cause an error 0x0000007B. The built-in utility can come to the rescue chkdsk.. Upload a PC from the installation disk (the same XP), clicking R. Log in to the recovery environment and execute the command. cHKDSK / R..
Windows 7 uses the same command, but with a key / f.
If the drive is old and with him before there were problems, it is recommended that by connecting the workpiece.
Viruses in the boot sector
It also does not prevent the test of the disk for infection with bottles - viruses infecting boot sector and record MBR. Naturally, such a check should be made using boot rescue disks like Dr.Web Sureit.. Another option is to remove the disk, connect it to the working PC and check it from it.
Hardware problems
The appearance of a blue screen with an error 0x0000007B may well be caused by hardware. If it is really in the "hardware", then first of all you need to check the hard disk. Also, looses are subject to stlishes (whether they are connected well) and the power supply. Be sure to test the RAM, since cases were noted when the error 0x0000007B occurred during damage to RAM modules.
As additional measures can be recommended to disconnect everything from PC peripherals (eliminate the conflict of their drivers), re-create the main boot record of the MBR, update the drivers of the hard disk controller, clean the CMOS cleaning, and also replace from under the boot disk files of the ATAPI.SYS drivers, intelide.sys, pciide.sys, pciidex.sys from the catalog System32 / Drivers. Driver files from the working system of the same version. If you doubt the results of your own actions, it will be wiser to attribute a computer to the diagnostic center, where specialists will be used to eliminate the problem.
» Blue Death Screen (BSOD) in Windows XP - And Lee Death?
Blue Death Screen (BSOD) in Windows XP - And Lee Death?
One of the problems that are often emerging from the Windows operating system users is the blue screen of death (Blue Screen of Death, BSOD).
Probably there is no man who has never seen these white letters on a blue background, speaking a critical error in the process of system operation. A lot of BSOD jokes "lovers" of Windows XP, saying that only the killing of the operating system can get rid of it and its installation with a clean sheet. And, preferably, not the brainchild of Bill Gates. But, as practice shows, it is not so terrible, as his little, and the blue screen of death is amenable to treatment.
What is BSOD?
Blue Death Screen is a message about the Windows XP / Vista / 7/8 operating system fails due to a faded error in the kernel executing code. Most often it is associated with the execution of an invalid operation by the driver responsible for the stable operation of the system. A reboot set by default after BSOD output deprives the user of all unsaved data, but the logs themselves appear in the system log. Memory dump is created (if such is provided in windows settings XP) In the expansion of * .dmp and may be subsequently studied and sent to Microsoft's work.
The text on the screen reflects the following information:
- Error code, so-called Stop code, and its value
- 4 additional parameters For debug utilities
- The address of the hard disk space where the error occurred (if you managed to determine)
- The name of the defective driver (if you managed to determine)
- Brief instructions from Microsoft on Windows XP Reboot and BSOD Control Recommendations if the screen appeared in the second or more times.
After the user saw the blue screen of death, the only thing he can do is restart the computer.
Stop code
The main key to getting rid of the blue screen of death is the code of an error - Stop code. To accurately determine the problem in text form, a description is displayed, and then its character value in hex on 0x00000000.
So do not rush to restart the computer. Write down the STOP code and with the help of another PC or device with access to the Internet, determine why the blue screen of death appears. If you do not have time to determine the error code, then in the system settings, disconnect the Windows XP automatic reboot. This can be done as follows:
As a result, you can view the blue screen of death with a new system failure, and then get rid of it.
The most common STOP codes and ways to eliminate them
Value:
STOP 0X0000000A, IRQL_NOT_LESS_EQUAL
The reasons:
Faulty drivers or errors of system utilities and antivirus programs
Actions:
Delete or disable the recently connected drivers, reinstall the conflicting programs.
Value:
STOP 0X0000001E, KMode_EXCEPTION_NOT_HANDLED
The reasons:
In most cases, the blue screen of death appears due to drivers conflict
Actions:
Delete, disconnect or update the drivers specified in BSOD. Make sure that new devices have been connected correctly and are compatible with the already installed.
Value:
STOP 0 × 00000024, NTFS_FILE_SYSTEM
The reasons:
Notice that the problem is the hard disk, namely in the work file System NTFS.
Actions:
May I help hDD installation In s.m.a.r.t mode in the BIOS settings, or check it for integrity using system utilities. For example, the Victoria program copes with this.
Value:
STOP 0x0000002E, Data_Bus_error
The reasons:
Networks with RAM or faulty hardware.
Actions:
If the installation of the new RAM bar, caused a blue screen of death - pull it out of the socket and try running Windows XP. If the error occurs again, then translate the status of the Memory Caching in the BIOS to disabled. In another case, you will have to find out which computer component has given a failure and remove / replace it.
Value: Stop 0 × 00000050, page_fault_in_nonpaged_area
The reasons: This error windows XP issues when it cannot find the necessary data in the computer's memory. The culprits in this case are devices and programs associated with RAM and ROM. Faulty RAM strips, damaged sectors on hard disk, system service errors, blocking access to antiviruses and problems in the work of the current NTFS volume - it is worth considering all these possible reasonsTo identify the real and eliminate the blue screen of death.
Actions: Check iron with special programs diagnostics. For example, Memtest for RAM and Victoria for hard drives. Restore the data from the Windows XP backup, if available. Installation less than high protection antivirus program and studying the list of files sent by it into the black list, can also give the system access to the necessary information.
Value:
STOP 0x0000007B, incaccessible_Boot_Device
The reasons:
The blue screen of death with this value appears during the launch of the system that cannot complete debugging, because windows bootloader Do not have time to start it. This Stop code is usually associated with an incorrectly specified ARC path in the boot.ini boot file, incorrect drivers for SCSI, RAID or UDMA controllers or a hard disk malfunction where Windows XP was installed.
Actions:
Check the hard disk for errors. If necessary, reinstall or update it drivers. In BIOS, set the appropriate data reading mode with HDD, for example, installing a new hard with SATA-output requires to change the IDE value to the IDE to the S-ATA. If iron is properly, open the terminal and run CHKDSK / F / R in system section. In the case when the disk cannot be connected to another computer for checking, use installation disk Windows XP and run the system recovery tool. In the terminal also spend Chkdsk / f / r.
If the Stop code that brought you a blue screen of death is not listed in the above list, you should use these general recommendations to eliminate BSOD:
. Even if the error after disappeared after it, do not relax, since over time the blue screen of death can again make a felt. It is better to act on ahead and, finding out the cause, and eliminate it.
They are both free and easy to use, but they will need to write to the disk or make the loading flash drive.
- The computer first is the car.So, if it is not in the program part, check iron. Replacing the components in turn, check the BSOD system. This method will help, for example, if a faulty video card beats alternating current According to the motherboard and other devices. Because of this, Windows XP simply will simply be able to read the data they need to start and gives the blue screen of death.
- If the blue of the death screen comes out due to errors on the boot disk, then may be damaged by boot.ini. In the better case, you will need to replace the file to the correct or new installation Windows XP. In the worst case, it remains only to replace the faulty hard drive.
Acting on the basis of the STOP code and taking all recommended actions to combat the blue screen of death, you can restore windows work XP and enjoy it for a long time. The main thing is not to lower your hands.
