Instructions for using Apple iWatch watches. Apple Watch Management Tips for beginners

Users are already wondering how to use this new smart gadget from the "apple" corporation. In most video reviews, this moment will be affected only superficially, so we decided to start a whole series of articles that will help you (or to dissuade from their purchase).

Apple Watch. There are only two physical buttons (digital crown and off button), however, as in the case of the iPhone, you can do a lot with their help.

For example, to enlarge the image on the screen, enough twist a digital crown in different directions. This reception is working with a home screen, maps, photos and many other applications. Works by analogy with the "wheel" on old iPod, so you are quickly lean.

By clicking On the digital crown you will get on the home screen. Just like when pressed button Home. On the iPhone or iPad: from anywhere - immediately home.

To call Siri, you need press the digital crown once and keep it Before the appearance of the appropriate application. Well, or simply say "Hey, Siri!".

Double-click on a digital crown You can switch between the clock interface and the last applied application. To turn on the clock again, it is enough to repeat this operation.

To access the possibilities of "universal access", enough press the digital crown three times. But to access the list of contacts you can simply press the shutdown button.

Although we have no doubt that you will guess how to turn off your watch, just in case, leave this advice for beginners: press the shutdown button and hold it. Up to complete shutdown Apple Watch.

To activate (well, what, suddenly you are the owner of the American bank card), click on the off button twice.

How to make a screenshot on Apple Watch? According to rumors, for this you need simultaneously press the digital crown and the shutdown button. True, in practice, for some reason, no one has yet checked (we will check everything).

Of course, Apple Watch management capabilities are not limited to physical buttons. You can also switch between screens using swipes and interact with the display by pressing. By the way, to activate Force Touch, it is necessary to use a long slightly stronger pressing on the screen.

These are just some of the basics that will help you more effectively use your watch. We will definitely continue to talk about all the opportunities on our website.

Elevance are "smart" clock from Apple. For the most part, it was possible to achieve such demand due to the enormous functionality of these devices. Most of the newly new Apple Watch owners cannot independently deal with the settings, for them we prepared this is a small review, within which we will understand in detail how to use Apple Watch.

The clock design implies only two physical buttons, but they will allow you to use all numerous functions in full. The upper button resembles a wheel, which are becoming a mechanical clock, but this is a digital crown. With it, you can, for example, increase any image on the display.

Also, this crown will display the device on the home screen, where you can see the icons of all installed applications. It is enough to press it once and you can start the selection of widgets. Holding the crown, you can call Siri, for the same purpose, use voice team Hey Siri, here someone is more convenient.

Double click on the coveted key, will display you on the screen, or vice versa will open the last used application. Each owner can get universal access to Apple Watch, the use of the same crown, click on it three times.

To see a list of contacts, it is enough to activate the power button, it immediately under the crown. Also, holding this key, you can turn off the device or turn it on. Apple Pay You can activate twice by clicking on the POWER button, although it is useful only for those owners who are possessors of a plastic card of one of the American banks.

Synchronization with iPhone, will take you quite a bit of time, for this, the smartphone must be installed apple program Watch. To set the pairing, scan the patterns appearing on the clock screen after the camera is automatically activated on the iPhone. If this method is uncomfortable or the camera is faulty, you can synchronize by entering the six-digit code.

When devices are synchronized, go back the registration process in Apple ID. Take conditions license Agreement And click "OK", after which you will be prompted to upload some applications. All proposed applications should be installed, as they are specifically designed for Apple Watch to reveal all their capabilities.

In the principle of this data, it is quite enough for any novice user of "smart" hours, however, this control and configuration of them are certainly not limited, in fact, the opportunity is much more.

Thanks to the gray market good links Or some other factors from many Russian users have already appeared, although the official start of sales of the accessory in Russia has not been announced. "Apple" clock - the device is completely new to users, and the management of them for most of us seems not familiar. In this article we want to tell how to manage Apple Watch, what functions do the wheel Digital Crown, how to quickly switch between applications and something else ...

The on and off Apple Watch is performed by pressing and holding the side button.
In order to go to the main screen, you need to press once on the wheel Digital CROWN.
Dual pressing on the wheel Digital Crown will switch you between the last two applications.
To invoke Siri's voice assistant, press and hold the Digital Crown wheel. Also activate Siri, you can easily raise your hands and the team "Hey, Siri".
To make a screenshot of the current screen, press the Digital Crown wheel simultaneously and the side button.
Using the Digital Crown wheel, you can scroll through the information on the up / down display. You can also navigate the screen with your finger (drive up / down).
To increase the image of maps or photos, you can also use the Digital Crown wheel. Please note that the ciphes gesture as it cannot be done on the iPhone.
To access your favorite contacts, press once on the side button. You can specify your favorite contacts in Apple Watch application on the iPhone.
Activate Apple Pay can be double-clicking on the side button.
To gain access to the center of notifications on the clock, swipe from top to bottom on the display - exactly as on the iPhone.
You can change the application location on the Apple Watch desktop as well as on the iPhone: Press and hold your finger on one of the icons, then the shawl icon move. You can also clean up the desktop using the Companion application on the iPhone is even easier.
In order to figure out the Force Touch technology, you need to experiment with the power of clicking on the display.
If Apple Watch and iPhone are in the same Wi-Fi network, the Bluetooth accessory connection is not required.
Through the companion application, you can synchronize the music and photos on the smartphone and the clock.
Note! If you use a sports version of the clock, be careful using chemicals (lotions, toilet water, etc.), otherwise traces may remain on the strap. Leather bracelets worth keeping away from water.

The Apple Watch smart watches do not apply to gadgets that must necessarily purchase each - however, their use can simplify the fulfillment of a number of tasks. For example, listening to music without using iPhone or the definition of physical activity, which may be needed to people who follow the condition of their health. Knowing how to use iWatch, you can take SMS message and phone calls - And not only with the iPhone, but also with models on Android OS.

Turning on

The first question for the user of the clock occurs about their inclusion. There are three ways how to enable Apple Watch:

Turning off is made by the same side button by hold it until the running button appears on the screen. and his brushes. Or just cover the clock with palm - the light sensor will work and the screen will go out.

Smart Clock Setup

The next important question is how to configure Apple Watch for further work. This will require an iOS, preferably with the latest version of the IOS operating system. The smart watches of the first generation required the availability of iPhone 5. Sold from September 2017 years Apple. Watch Series 3 will not be able to configure without an iPhone of the 6th model.

In order to connect Apple Watch to the iPhone, you need to synchronize the devices with each other. The conjugation process with a third series of hours will not take much time:

The Watch application is downloaded to the smartphone, in which the creation of a pair of smart clock is pressed.
iPhone is brought to the clock.
A similar button in the settings is pressed on the clock.
Aphon camera viewfinder is on the clock screen, where a picture resembling galaxy appears.

After a certain time you need to synchronize gadgets, it is possible to configure smart watches directly from iPhone.

If synchronization is not required (another iPhone will be connected to the clock), break a couple with Apple Watch This way is as follows:

Open the Watch application on the smartphone.
Select the "My Watch" tab at the bottom of the window.
Select the connected Apple Watch and click on the " i ».
Click "break a couple with Apple Watch."
Confirm the cancellation of device synchronization, after which all the data on the clock is removed from the gadget.

First setting

To create a pair with Apple Watch, an iPhone is brought to the clock (with Bluetooth enabled) and perform the following actions:

1. After the message appears on the telephone screen, you click "Continue" on the phone screen.

2. The center of the display of the clock is exactly opposite the iPhone camera viewfinder.

3. Choose the hand on which the gadget will be put.

4. Enter Apple ID password, with which the user has access to various services.

5. Customize the work of geolocation from iPhone, Activity Applications and, if necessary, mobile communications.

6. Install applications from the online store, set up various useful services.

When you first use, you will have to spend more time. Other parameters (including password access to the gadget) can be changed later. This does not always require an iPhone - part of the settings is available and from hours.

For example, to change the dial on Apple Watch It is worth just with the effort to click on the screen. The gallery of the dials opens. It is necessary to scroll through it with a gesture of luxury and choose the option you like.

Easy will be easy change the language on Apple Watch. It is enough to go to the writing screen of a message or a response, with the effort to click on the display. A button selection button will appear. And the replacement is performed from the smartphone - the language selected from the iPhone is automatically installed on the clock for the SMS set.

Button Digital Crown.

A starting user of the clock may be interested in information about the Digital Crown Wheel in Apple Watch. What is it and what functionality has? The main purpose of the part is the scrolling of images, lists and cards, sound control, font size and other sliders. It is possible to call with it and the list of phones, to which you can then send a dictated SMS message or call.

TO additional features Digital Crown belongs:

opening the latter running application double touch;
activation of voice assistant Siri long pressing;
use as the Home button;
transition to dials.

Using this element, the user speeds up switching between different applications. To do this, click on the wheel twice. It makes it and screenshots of the watch screen - but only if you click simultaneously with the side button.

Synchronization with Android OS

In the absence of an iPhone, you should know how to connect Apple Watch to Android - although the functionality will be strongly limited. To synchronize mobile gadgets from the user is required:

Install Aerlink: Wear Connect for iOS on your phone, downloading it from Play Market;
Download to smart clock Utility BLE UTILITY;
Run Aerlink by activating iOS Service;
Open in the BLE UTILITY application on the Peripheral tab.

Sometimes synchronization is performed not from the first time, therefore actions will have to repeat. The connected clock and smartphone do not form a real pair, as when using an iPhone. Apple Watch in this case can only monitor the charge of the phone, receive SMS and call notifications. The possibilities of sending the message, making a call or a response to it is not provided.

Multimedia

When all the settings are made, you can get uploaded to smart clock useful information - Including and multimedia files. When synchronization with iPhone, it appears download music on Apple Watchto listen to it even in the absence of a pair using wireless headset Airpods. Instructions for downloading audio files on the clock looks like this:

The Watch application starts on the smartphone and the folder with music opens.
The required number of melodies is selected (about 2 GB are available on smart hours, which are enough for 150-200 tracks).
Start the synchronization of the created playlist for which it may be necessary from 10 minutes to several hours.

Synchronized ringtones can be launched directly from the clock, even if the iPhone is disabled, not charged or is far enough. Before starting, first have to change the music source in the Select Source settings menu. The result becomes the opportunity to use Apple Watch as an iPod.

How to configure whatsapp

Since the application developers have not yet adapted WhatsApp under Apple Watch, its functionality can be somewhat limited. To set up notifications, you need:

Download Whatsapp on phone;
In the Watch application on iPhone, set the corresponding switch.
In the WhatsApp settings on the smartphone, activate all items in the notification menu.

To delete the application, it is enough to turn off on iPhone Parameterresponsible for using the Apple Watch program.

Sport functions

In the default list of installed smart-clock applications, there is a "activity" utility, which allows you to track physical exertion and determine a number of indicators:

ring "Mobility" is responsible for counting the spent calories;
the "Exercise" ring monitors the intensity of training;
the ring "with a warm-up" controls user activity during periods when it moved at least 60 seconds. contract.

For more information on filling the rings, it is enough to brush up. Another disadvantage can be obtained on the number of steps through the distance, information about training.

The application also allows change the goal of activity in Apple Watch.To do this, it is necessary with the effort to click on any screen in the "Activity" program and set the desired calorie value. Changing workshop and exercise tasks.

Apple Pay.

Among the convenient functions of the gadget - the possibility Pay Apple Watch clock instead bank card. To do this, you will have to connect to the appropriate service, using the profile in Apple ID. To configure Apple Pay on Apple Watch required:

Open the program first on iPhone.
To transfer it to the clock through the Watch application.
Add a map to the list.

Cards that have already been used to pay for purchases in App Store. or iTunes Store., Move their security code by entering. A new payment agent will have to take a picture camera iPhone. and execute all application instructions. Sometimes to check the personality of the owner of the Card, the Bank has to spend a few minutes.

To pay for hours you need:

make sure that the store takes payment by this method (one of the characters);
produce double press on the side button to use the default card;
hold the watch display at a distance of several centimeters from the contactless reader;
wait for easy clock pulsation.

Features of protection

The inhable smart clocks have protection against fake and theft. In order to check Apple Watch Authenticity Open the gadget settings and the "Main" menu find the field with the serial number (IMEI). For the third generation of hours, this possibility is available using the synchronized iPhone. In the device information there are all the necessary information, including IMEI. You can find a serial number and on the cluster of the clock or the connector for the strap.

From foreign access, the model is protected by a password. It is not necessary to establish it, but if you have confidential information on the clock, you should take care of protection. Sometimes users have questions how to unlock Apple Watch if you forgot your password. Make it easy - enough to remember apple data ID and reset the clock.

Reset Apple Watch to factory settings You can use a conjugate iPhone and installed on it applications for hours. The information is erased directly from the gadget - after connecting to the charging cable, shutdowns using a side button and selecting the content deletion and settings menu. After reset, the password disappears, for further work with Apple Watch, you will have to synchronize with your smartphone and go through the setup procedure - or recover the backup.

Update firmware

For smart clock, it is possible to replace the old firmware. In order to update Apple Watch OS 4 It will take an iPhone with the latest version of iOS. User actions in this case should be:

Make sure that the clock is charged no less than 50%, connect them to charger.
Connect an iPhone to the Wi-Fi network, put next to the clock.
Open the Watch program on the phone, proceed to the main settings and select the software update item.
Download update - Sometimes you have to enter a password.

The flashing may be needed for about an hour. During the update process, you can not remove the clock with charging, close the Watch application on the phone and restart at least one of the synchronized devices. Knowing how to flash Apple Watch, you can not worry about what is installed on the gadget operating system It will endure, and will not support new features.

If the smart watches depended, restoring their performance will help. In order to reboot Apple Watch You can use in two ways:

By pressing the side button and holding a finger on the screen when the POWER OFF menu appears. The key is held before the manufacturer's logo appears.
By pressing the side button at the same time and Digital Crown, release them only after rebooting.

To increase the work hours of smart clocks in the list of options, there is a cost savings mode. When using it, the gadget shows only time and cannot be synchronized with phones. Automatic inclusion Eco mode occurs if the battery charge drops to a level below 10%. Thanks to this, hours can work for a few more hours. If you want to turn off the eco mode on Apple WatchThe gadget will have to restart using the side button. Automatic shutdown happens after charging.

To charge Apple Watch. Apply a special cable and power adapter connected to the power grid. The gadget should be put on the charger with the back side and wait until the charge indicator shows 100%. The battery capacity recovery process lasts up to 2 hours. After that, the gadget will work for 18 hours as usual and will keep charge to two days, if you use it just as a clock.

How to find Apple Watch using iPhone

To search for hours you will need iPhone, iPad or iPod Touch. From iOS 10.3 or higher, and Apple Watch themselves must be included.

Install app Find iPhone;
Log in (Username and password Apple ID from account in ICloud);
In the My Device tab, select Apple Watch;
Select option Actions. If Apple Watch is enabled, it is possible to track their location on the map, as well as mark them as lost, delete all data from the device or reproduce sound signal To detect hours.
If there is confidence that Apple Watch is in close proximity, you can click Play sound. The clock will begin to make a repeating beep;
If the clock is found, you should turn off the sound by clicking on the option Close On the dial.

application Find iPhone It will be useless if the iWatch is turned off or outside the Wi-Fi zone. In this case, it is necessary to take advantage of the regime in Find iPhone To block the device and track its geoposition. When someone finds and turn on your watch - you will immediately get the appropriate notification.

How to connect Apple Watch to Wi-Fi

The Wi-Fi connection makes it possible to use the extended gadget functionality, for example:

enjoy voice assistant Siri;
create reminders and calendar events;
drive Apple TV;
take and send messages.

Connection occurs automatically to the Wi-Fi network, in which the iPhone previously connected with the clock was registered.

Consider the features of the connection in manual mode:

make sure that the iPhone includes Bluetooth and Wi-Fi functions;
whether devices are connected to each other;
disable Bluetooth, hours will be connected to a smartphone only by Wi-Fi connection;

Now you can use all EPL functions even at a high distance from iPhone. Bluetooth radius is only 10 m, but with this connection, the battery charge is spent less intensively.

How to turn off Voice Over on Apple Watch

There are two ways to disable the screen sounding:

Touch the display with two fingers. To resume voicing, you must perform the same.
In order to completely turn off the voice acting, you must open the settings in the menu. Next, the main tab, then select universal access and remains to click on the VoiceOver button.

How to track Son.

Unfortunately, the developers do not provide a built-in sleep tracker on Apple Watch. But there is an opportunity to use third-party analysis applications, for example:

Autosleep.
Sleep ++.
Sleep Tracker.
Pillow (perhaps best app For sleep monitoring. In addition, there is a smart alarm function).

How to measure pressure

Apple Watch pressure measurement is not provided. The network you can find information only about the future development of the company to implement this function in subsequent models of the clock.

Do not come notifications on Apple Watch

Decide this problem The following actions will help:

disable wrist recognition functions;
disable the mode do not disturb or lock the screen;
break and re-create a pair;
relief the settings;
cleaning sensors that are adjacent to the wrist.

How to change the strap

Make it very simple. For example, you can change the boring or worn sports strap on the leather, or even the Milan mesh bracelet. Fortunately, the market is simply huge.

For shift it is necessary:

Turn over the clock with the display down;
Press the Strap button on the fixation button;
Shift the strap to the side by holding the fixation button.

Apple Watch Series 3 - The last generation of smart clocks from the Kupertin technological giant. Unlike predecessors, they are equipped with an autonomous LTE module running through the built-in ESIM (in Russia is not yet supported), which can be used even without a smartphone. But it will still need to activate the device.

To turn on, press and hold the "long" (not round!) Side button until the manufacturer's logo appears.

If for 10-15 seconds holding a long side button, the screen did not flashed and the device does not turn on, make sure it is fairly charged. Connect the "Charger" and leave for 30 minutes. After that, you can try to enable the device again.

For initial setting You will also need a smartphone updated to latest version iOS, with Bluetooth enabled and active internet connection (by mobile network or Wi-Fi).

In order to initially configure smart watches, you need an iPhone with Internet access. How to connect these two devices:

Include them;
Lay the clock to the iPhone. Wait a while until the phone appears on the phone screen with a proposal to use a smartphone for settings. In it, click "Next". If it is not displayed, check the Bluetooth - it must be enabled. You can also open the appropriate application and click the "Create Pair" button;
After that, a special animation will appear on the screen of the clock, and the smartphone will turn on the camera through which it will be recognized. Place the display of the device-companion in the center of the viewfinder, as shown in the prompts. If automatic recognition does not occur, click the "Create pair manually" button. The wizard will demonstrate device binding instructions;
Choose, on which hand you plan to wear a clock;
Agree with all terms of use;
Enter the password from your Apple ID.

Smart watch At initial activation, copies the profile of the settings from the connected smartphone. That is, if Wi-Fi, GPS, SIRI is included on the iPhone, etc., they are automatically activated on the device-companion. Passwords wireless networks Also will be transferred along with the rest of the data.

Enable WiFi on Apple Watch 3, as well as disable it or configure other parameters, you can directly in the corresponding initial setup wizard window.

In the initial setup wizard you can also:

Set the password to enter. It will be activated when removing this accessory with hands;
Configure the branded payment service;
Install applications from the AppStore.

In the process of initial configuration, various tips on the screen will be shown on the smartphone screen.

Tracking program physical indicators It is called "activity" and is pre-installed on the WatchOS OS, that is, it is ready to work immediately after the primary setting.

Instructions on how to enable physical activity tracking or disable it, are shown directly in the primary setup wizard on the smartphone. Tips are in the application itself.

The following indicators are displayed in the ring diagram interface:

The number of calories burned during the movement (Mobility parameter);
The total duration of movements (the "Exercise" parameter);
The number of hours in the current day, in each of which you moved at least 1 minute (parameter "with a warm-up").

To view detailed information about each parameter, you need to swipe on the screen with circular diagrams up.

The parameters "Exercises" and "with a warm-up" are not configured. "Mobility" can be changed by a strong tap to any screen - then the screen will open with the settings of the calorie number that need to be burned to achieve a daily target.

Reminders about the need to "walk" are configured in the management application on the smartphone, in the "My Clock" tab - "Activity".

In no way. This model, as well as the previous, is not equipped with a built-in tonometer and therefore cannot measure blood pressure.

To measure the pulse, you must run the "Pulse" program from the application menu. In addition, the device constantly analyzes the heart rate with the active mode of "workout", as well as 3 minutes after its completion.

When you first open the "Pulse" program, the application will propose to include notifications about increased heart rate in the absence of physical activity of use. If necessary, this feature can be activated.

For measuring the heart rate, phototypemography technology is used, i.e. The pulse is analyzed in the degree of blood light in the vessels under the skin.

As a result, the quality of the measurement of the pulse may vary depending on how the photocells fit to the skin, from the color of the skin, from the health status of the user and other factors. The exact value may differ in a few shots per minute of the measured both in the large and smaller.

Built-in quality monitoring tools and sleep phases in this device-companion no. Therefore, it is recommended to use third-party to track softwarewhich can be downloaded from the AppStore - such as Sleep ++, Autosleep, Sleep Better, Sleep Tracker, etc.

How to track sleep on Apple Watch 3 using third-party

The principle of operation of various third-party software is about the same. Required:

Install the desired sleep tracker from the AppStore application store;
Open sleep tracker and start tracking mode.

To use the clock as a smart alarm, you will also need to install third-party software with support for this function. For example, SLEEP ++ or similar from the above list.

In order to work the branded payment service, you will need to install a password code. This is described in the instructions for the primary configuration of the device. In addition, right in the same menu you can bind a map with which you plan to pay for purchases.

To configure the service if this item has been passed to the primary setup menu, you will need:

Open the Watch application on the smartphone;
Open the "My Watch" tab;
Open the "Wallet and Apple Pay" item;
If the clock is not set to the password, the application will offer to install it right now. Do it;
Click "Add Map";
Select the map from the number already attached - or enter the data of the new one;
Enter the Card Security Code;
Click "Next" and wait for information from the Issuer Bank;
Click "Next".

Everything, the branded payment service will work.

To pay in the store, you will need to quickly press the side button on the clock twice and then bring them down the screen down to the terminal. When activated, they are slightly curled.

If the transaction size exceeds 1000 rubles, you will have to enter a pine code of a tied card on the terminal.

Using hours, you can unlock only those Mac computers and laptops that work on MacOS High Sierra and support wireless connection Bluetooth. In addition, all company devices must be associated with one account. To configure unlock, do the following:

On the computer or laptop, open the settings application, select the "Protection and Security" item, then "Basic";
Install a tick near the "Unlock MAC using Watch" item;
Enter a password account;
Confirm.

Everything. Now the computer will unlock automatically.

For charging, you must use a complete wireless charger. It is enough to connect it to the network and put the clock with the back side on its active surface. The charger is equipped with special magnets that automatically align it.

You can also use AIRPOWER wireless charging.

For charging, you can use not only the household network. The power cable can also be connected to ports. USB computer, laptop, external battery ("Powerbank") or any similar charger.

Update software (WatchOS) is performed through a tied smartphone iphone.. Instruction:

Set the watch to charging. Before completing the update, it is impossible to shoot with charging;
Make sure they are charged by more than 50%;
Open the Watch application on your smartphone, in it - the "My Watch" tab;
Select "Main", in it - "Update software";
Download upgrade. If necessary, you will need to enter a password from your account;
Update will be installed automatically;
Installing the update may take time. Wait for completion. This will inform the corresponding indicator.

You can remove the clock with charging only after completing the update.

No you can not. Apple Watch with android phones do not work. Does not exist third-party applicationwhich would simulate the corresponding software for iOS.

However, the user community is looking for a different way to bind these two devices. But on currently The answer to the question "Do Apple Watch work with Android" work "- no, do not work.

First, make sure that it is Watch, and not "smart watches IWatch" or something in this spirit.

How to check Apple Watch when buying:

Spend a visual inspection. Make sure the housing is deprived of any connectors, including slots for SIM cards or memory cards, charging connectors, etc.;
Turn on the device. Make sure it is in principle turns on;
Try connecting to the smartphone. If during the primary setup device suggested entering your account data - you can enter. Main: To not be the "Activate Watch" screen.

GPS is not turned off. You can turn off on the phone, then the number of geopositioning requests will slightly decrease.

If Apple Watch is not charging, you can try the following:

Make sure that the power supply is installed in the outlet and that it has a current. Try another outlet;
Make sure the wireless charger comes into contact with the clock, and the magnets leveled it. Try to reconnect. Try to flip the charger;
Make sure the chargers (including a wireless module, cable and power supply) are original and supplied;
The charging device should not be a transport film on one side;
Charger and clocks must be clean;
Try to forcibly restart the clock. Press the round and side buttons and hold them within 10 seconds. After rebooting, put on charging again;
Try another cable, another power supply, another wireless charger.

If you still do not charge, take them to the service center.

The easiest way to reset is remotely delete all personal data through the ICloud service:

On your computer, open the website icloud.com;
Go under your account;
Select "Find iPhone";
Choose from available devices your watch;
Click "Erase" and then select "Next" until the process is completed;
Also click the Delete button (Pictogram with a cross) next to the clock name.

Through the application a little more complicated. This will be written in more detail in this instruction in Russian (in the section "How to break a couple").

In order to reset the clock (to carry out the so-called "Apple Watch Restore") associated with them, the iPhone must be connected to the Internet for mobile or Wi-Fi.

The third-generation companyon device (Apple Watch Series 3) restricted supports the QI wireless charging standard, so it can be compatible with some chargers. Try to attach it to the rear side to the active charger with QI support for a few seconds. If charging goes - this device can be used.

Before selling the clock, you will need to remove your own credentials from them. How to untie apple iwatch from Apple ID:

Open the Managing Application on the phone;
Open the My Watch tab;
Open the "Information" menu (indicated by the I symbol in the circle next to the clock name);
Select "Broken a pair";
If used tariff plan, click "Delete Tariff";
Enter the password from your account;
Confirm your desire to break the pair.

When disdicker also reset to factory settings.

This may be due to the following:

Smartphone to which smart clock is connected is now used. Then notifications are displayed on it;
On the clock is active, the screen lock or the "Do not disturb" mode. Unlock or disconnect this mode through the control location;
The clock is disabled from the phone. This is reported in the control point of a special icon. Turn on to telephone wi-fi And Bluetooth, and on the clock - first activate the airrest, and then turn it off.

To unlock the clock, touch their screen or briefly press any button, and then enter the code-password installed earlier.

The clock uses special straps with branded fastening. Apply the standard spring, distributed in analog devices, will not work. But for changing the strap, it is enough to remove the old one and install in its place new before the appearance of a characteristic click.