How to add a Windows 10 recovery point. How to create a recovery point

The recovery point (TV) of Windows 10 is an OS service that will help in a critical situation with a system fail. Computer is a working tool that is actively used by the user. It is constantly installed on it software And periodically plug in new equipment. The operation is not always successful, so developers provide for such an opportunity as a rollback.

What is the system rollback

In the case of installing incompatible software or conflicting gadgets, the PC begins to malfunctions. To save the system safe, without reinstalling it, you need to roll back to the last successful assembly, take a step back. Creating a Windows 10 recovery point will help it.

It is important to remember that the minimum information is preserved, and not full copy OS. These are the settings that relate to the drivers and by: Registry, information about system files, etc.

Before installing dubious programs downloaded from the Internet, or new equipment, it is necessary to maintain such milestones. Below we will tell you how to create a recovery point in Windows 10.

Rollback to the last working state does not mean the complete restoration of the OS. If you need to return the entire OS, use the "Backup" feature.

Procedure for creating

Create TV You can independently or charge it. Manual it is performed in the properties of the system. Below is the algorithm how to do it.

We will need a control panel. In the "dozen" it can be found through the search.

Select "Minor Icons".

Click "Restore".

Then on the inscription "Setting the system recovery".

You can get into this section in another way: press the Win + R keyboard and enter the command. "SystemPropertiesProtection".

Before creating TV, the OS protection should be included. Tap the "Configure" button on the System Protection tab. Without this action, new milestones will not be created. Moreover, disabling protection will delete existing points.

Select the "System Protection" option, specify the amount of memory that is allocated to save and click OK. IN latest version Restrictions were removed that reserved the location under TV files. Now you can control how much space this data will occupy. But it is worth remembering that at zero value to create a rollback tool will not succeed.

The "Create" button is activated. Click on it.

Enter the point name and click OK. Try so that the name is "talking." If necessary, you will understand when it was created to what actions.

The creation process begins.

After completing it, you will see a confirmation.

As you can see, making the Windows 10 recovery point is easy. And if you are interested in find out how it is done, read another article.

Where to find a Windows 10 recovery point

To see TV through the system, open the properties window again. Special service does not exist. You can see them, just starting the rollback procedure. How to see Windows 10 Recovery Points - Instructions:

Tap "Restore".

Then "Next".

You will see a list of milestones.

To view which changes will be deleted, highlight the item and click "search for affected programs." In our example, after creating TV, only one program was installed.

Wait for the end of the scan, which takes about 3-5 minutes.

The list will appear in the window.

To see where check Point Restoring Windows 10 system, you must run a number of settings over the system disk. Physically, they are posted in the System Volume Information folder, access to which is prohibited. In this folder stored the most important informationassociated with the disk. It is created on any carrier, including a USB flash drive. This folder is generally impossible to see without change system settingsSince she is hidden. Change the situation.

In the control panel, select "Explorer Settings".

On the View tab, remove the checkbox from the "Hide Protected Files and Folders" item.

Open the conductor.

Select the disc on which the operating system is installed.
At the root you will see the desired folder.

If you are not an administrator, an attempt to open it will not lead to anything, you should give access to the current user. To do this, click on it right-click and select "Properties".

In the Safety tab, click "Advanced".

In permissions, click "continue."

Click "Add".

Need a link "Select Subject".

Enter the user name under which you are logged in, click "Check Names". If there are no messages (everything is entered correctly), click OK.

To find out your name in the system, click "Start" and hover over a little man.

Give full access to the user.

Next, click "OK". Warnings may appear, but you should not pay attention to them. Open the folder. Files with the title in curly brackets are points. It is impossible to transfer them.

So, where the Windows 10 system recovery is stored, it has become clear.

How to create a Windows 10 system recovery point on a laptop is also obvious. Actions are absolutely identical.

After viewing, we recommend returning the settings in initial position. Especially if other users have access to your PC.

Automate the process

Automatic creation of Windows 10 recovery points is necessary when you often make changes to the OS. You can configure it in a trigger - this is an event or time. For example, daily or when loading the system.

Using the search, find the task scheduler.

On the left, go along the path of the task scheduler library -\u003e Microsoft -\u003e Windows -\u003e SystemRestore.

In the middle area, select the SR file properties.

On the Trigger tab, click "Create" to specify the condition.

It remains to configure the trigger to create a point recovery WINDOVS 10 in time or event.

Sometimes there is a need to restore the OS with external drive. Create a recovery point in Windows 10 cannot be unable to create an image.

All of the above actions will help you create a recovery point in Windows 10 on a laptop or computer. In the future, this will help to do without reinstalling the OS, if you have conducted an unsuccessful experiment with equipment or have established a dubious program.

Read, how to create, delete or roll back Windows 10 to recovery point. How to restore the system using a recovery point. Using the recovery point, you can restore the system windows files 10, as well as the performance of the operating system, correct the sudden errors that occurred or return the system to the state at the time of creating the recovery point.

By default, Windows has the creation of a recovery point during installation or removal of updates, drivers or applications.

Work with Windows 10 Recovery Points

How to create a Windows 10 recovery point

Create a recovery point manually:

Configure Automatic Recovery Points:

Launch Control Panel / Administration / Task Scheduler.
In the left window, select Task Scheduler Library / Microsoft. / Windows / System Restore..
Right click on the file Sr. In the middle upper window and select Properties.
Select the tab Triggers. In the window that opens.
Click Create And set the necessary time to create a recovery point.

How to Delete Windows 10 Recovery Point

Windows 10 recovery points are saved by the system on the hard disk of the computer. Under these, it is allocated to a certain part, as the disk is filling out, more pressing recovery points are removed and new ones are saved to their place.

The following features are available to work with recovery points:

Removing all recovery points, except for the last

Removing all recovery points, including the last

How to restore Windows 10 from the recovery point

Attention: Windows 10 recovery from the recovery point concerns only system and software settings operating system. Applying the recovery point will delete all programs that have been set after its creation and will not restore the remote earlier files.

To restore Windows from the recovery point, do the following:

Where are the recovery point files?

All available recovery points can be seen in Control panels / Restoration / Running system recovery.

Physically, the system recovery points are in the root directory system Disc (as a rule disk with :), in the folder System VOLUME INFORMATION.. However, the default users do not have access to the contents of this folder. To get inside the catalog it first needs to be done visible, and then get special rights.

For this:

Files and folders that are here are, you cannot delete manually, as they are protected by the system. If you want to clear the System Volume Information directory, then use standard methodsallowing.

The recovery point of the system is not created. What to do?

Check out the condition windows services "Shadow Copying Tom". For this, perform:

Go to Control Panel / Administration / Services.
Find a service "Shadow Copying Tom".
Run or activate it, if necessary, put it on its inclusion "Automatically".

The system recovery points may not be created on the computer on which two operating systems are installed or the operating system is damaged by malicious software or viruses.

How to restore Windows 10 from the recovery point using the command line

If problems arise with launching Windows. 10 in normal mode, then restore its performance by starting the recovery point can be Command line.

For this:

How to restore remote recovery points?

Windows 10 recovery points are saved by the system on the hard disk of the computer. It is allocated to a certain part of it, as the fill in which the more pressing recovery points are removed and new ones are retained.

Also, the recovery points can be deleted manually - this is described in more detail above.

Often Windows restore leads to the loss of important files. Windows restore using the recovery point, rollback to more early version operating system, computer refund to its original state, errors in the work of programs for reserve copy, damage or rewrite system files, errors file System Or the presence of broken disc sectors is not a far from the reasons for deleting data.

Windows Recovery Console will return the performance of the operating system, but can lead to the loss of personal files. It is not always possible to restore Windows performance without clean installation of the operating system, which can also entail the loss of files.

Operational windows system 10 Restored from the recovery point? Leave feedback and ask your questions in the comments.

How to create a recovery point in Windows 7.10 or 8 often occurs after a bitter data loss experience, but we will tell you how to make a recovery point!

This happens in automatic mode. Also, Windows does it when it detects serious changes in its work - for example, when you install updates for OS, driver or some kind of software.

These points are the saved state of all files and registry parameters - with their help you can start at any time. If at some point you will need to cancel some changes, you can quickly return the OS to that temporary segment when these changes have not yet been made.

System recovery uses windows feature Under the name "System Protection". This feature Regularly creates and stores information about computer system files, registry key and previous versions of files. Return OS to an earlier state affects system files Windows software installed, Registry settings, changes in scripts, batch files and other types of executable files - but does not affect the user's personal files.

Creating a Wimdows Recovery Point

To create it manually, right-click on the computer icon on your desktop, select the "Properties" item in the context menu, and in the System window, click the System Protection link.

In the "Properties" window, click on "Create". You will open the "Protection" window.

Enter any name (name) and click on the "Create" button.

The process you run is less than a minute.

When the process is completed, you will see a message that the process is successfully completed.

Click "Close". Now at any time you can return the computer to this or any other time point.

Windows restore before the previous state

If problems arise when working problems, you can return your PC to the "normal" period of its state, and this is done as follows. In the Properties window, click "Restore".

In addition, you can open the recovery window using the "Run" dialog. Press Win + R keyboard, enter the rstrui.exe command and press ENTER.

The Restore Window opens. Click "Next".

Select the point to which you want to return your computer, and select "Next".

Now you need to click on the "Finish" button, and then confirm the start of the process startup by clicking the "Yes" button.

The process also includes a reboot of the computer. After rebooting, you will see a message confirming that your computer has been successfully restored.

Creating recovery points

Points can be created automatically and manually (on demand). Typically, automatically created when installing drivers and programs. When installing the driver and program, you can inform the system about the need to save the current state.

It is also possible to create it at any time independently.

To create manually, open search string And type "Creating a recovery point." The "System Protection" window opens. Click the Create button. In the window that opens, you can assign it any name. After entering the name, the point will be created and all the necessary system files that are needed to roll back are fixed in case of failure.

How to restore the system using the recovery point?

To use the function you need to enter additional download options.

To do this, open the Start menu, click on the gear icon (Parameters), go to the "Update and Security" tab - "Restore". Find the "Advanced Run" item and click on the Run Now button.

Opens blue screen from additional settings. Select "Troubleshooting and Troubleshooting - Advanced Settings System".

A window will appear where you can select the recovery point that we want to be used before returning to an earlier state.

If Windows 10 does not start, then we have two options.

First - take advantage boot disk or flash drive with Windows 10 installer. After selecting a language in the installer, a window will be displayed that allows you to go to windows installation Use the "Install" or in the recovery menu.

Click on the "System Restore", select the "Diagnostics" section and select the first item in the feature, as shown in the figure.

If not boot flash drivethen in mode additional parameters Downloads can be processed in a different way. Press F11 after turning on the computer and the appearance of the first screen. Unfortunately, this method does not always work depends on BIOS / UEFI.

If both options did not work, it remains on another computer to download Windows 10 from the Microsoft website with the utility Media Creation Tool. Create a bootable DVD or flash drive with installer and try to restore non-working computer.

All users of computers, laptops sooner or later face problems, in the form of errors in the operating system, installing not those drivers, programs, viruses, etc. To eliminate them is spent a large number of time and strength. In fact, to solve most problems, it is enough to use the recovery point. The recovery point is the result of the process of saving system files. Your system, default, when installing programs, drivers in secret from you backups yourself (more precisely system files). Whatever the problems you could return to the state when everything was fine and everything worked (the process is called the "rollback" system). Thus, the first thing I recommend to do in case of problems with operating system, Drivers, viruses - try to restore the system to the previous recovery point. That is, there is a problem arose today, use yesterday or in yesterday's recovery point.

Written below is relevant not only for Windows 10, but also Windows 7, Widows 8 / 8.1.

How to create a recovery point in Windows 10.

To progress yourself, you yourself can create a recovery point. To do this, you need to open the System window, you can do this in several ways:

1 way. Press the WIN + PAUSE key combination.

2 way. Right-click on the "Computer" shortcut, select "Properties".

3 way. Right-click on the Start menu and select "Control Panel"

Then click "System and Security".

In the next window, select "System".

It does not matter how much of the way you took advantage of, the main thing you have opened the "System" window.

In the left menu, select "System Protection".

In the Protection Settings menu, you will see all your logically discs. Select a disc with the operating system (disk C) and click the "Set" button.

Here you can enable or disable the creation of recovery points, set the size of the disk space allocated for the system backups.

To make a recovery point in the "System Protection" window, click the "Create" button

Enter the name of the recovery point name, for example, "before installing the driver on the video card" or "before installing the incomprehensible program", etc.

The process of creating a recovery point will begin.

A few minutes later, it will end.

Congratulations, you made a recovery point, now you can start experiments with the system. If something goes wrong, you can "roll back" the system.

System rollback to recovery point in Windows 10.

If there is a situation at which you need to return to the recovery point (roll back). You need to open the System, methods window, then select the "System Protection" in the left menu.

Press the "Restore" button.