A tablet pc is connected via usb. We connect the tablet to the computer

I have already written that tablet sales are growing, and even more than once. There are a lot of all kinds of companies on the market, and if earlier such well-known companies as Samsung or Apple showed the greatest sales growth, today we see incredible growth in the so-called B-brands - these are inexpensive tablets from Chinese manufacturers, which often turn out to be no worse than their more dear fellows, and often even better.

But in fact, it is not so important which company you use the tablet, because problems can arise with it at any time. Which for example? There are a lot of them, so today we will analyze in more detail only one of them, which, by the way, is very common - the computer does not see the tablet when connected via a USB cable.

I myself have encountered such a problem, and not only on a tablet, but also on a smartphone based on the operating system. And yes, it doesn't really matter which tablet you use, be it Samsung, ASUS, Lenovo, Ritmix, Prestigio, etc. The solution to the problem may differ only in the case of Apple iPad, and even then not always.

Solution

There are several solutions and I'll start, as usual, with the simplest one.

  • If, when you connect a laptop on the screen of your computer, you do not see the tablet in the list of connected devices, or you get an error that the computer could not recognize the device, then a regular restart of the tablet can help. This procedure has helped me more than once. At the same time, the problem itself is connected precisely with the software of the tablet itself, because after updating the firmware, such oddities disappeared once and for all.
  • The next step is to allow access to the device. When you connect a device via USB, then, depending on the firmware and its settings, it either automatically opens its file system, or else you need to open it yourself by tapping the screen several times. If you look at the screenshot below, you can see that the tablet can be connected to the computer as a USB drive, media device, camera, etc. Try switching between these modes and then your device will most likely be detected by the computer. The default is USB mass storage mode.

  • Remember to turn on your tablet to use it as a USB storage device. Again, this depends on the firmware, but on stock and not the most recent Android, this is done by tapping on the button, as in the screenshot. The computer recognizes the device, but prevents you from copying anything to it.

  • Pay special attention to the USB cable. It is possible that the cause of the problem lies in it. For example, a dog or a cat bit the wire, so it doesn't work. And the wires often break near the plug itself, which is quite difficult to notice - only a complete replacement of the cable will help.

  • If, when the gadget is connected, nothing happens on the monitor screen at all, then there is a high probability that the necessary driver is missing. As a rule, under normal conditions, the system tries to replace the driver if there is none, and in most cases it succeeds. Problems usually begin after flashing the device, when the system cannot take advantage of the driver replacement and requires a new one. The main question is which driver to download and from where. In most cases, this does not depend on your model, but on the firmware. If you downloaded it, for example, on the popular forum w3bsit3-dns.com, it would be better to ask about the driver there - they will probably answer you which driver is better to download. After installing the driver on your computer, you can forget about the problem.
  • If suddenly you do not succeed at all from what I have voiced, as an option, you can do full reset devices (with complete removal all data, so save important information beforehand). As a last resort, reflash the device.

Have a question on a topic? Ask!

In order to transfer your favorite films, books, programs, music from a computer to a tablet, do you need to connect these tablet to a computer? There are three main connection methods: Bluetooth, Wi-Fi, USB. The latter is the simplest. But this process can be different, as not all tablets have the same operating system. Working with Android is different from working with iOS. The first is installed by most tablet manufacturers. The second is found only in Apple products. Let's take a look at how to connect a tablet to a computer via USB with each of them.

Connecting an Android tablet

A connecting cable is usually included with your tablet. Through it, connect your laptop and computer. In order to sync both devices, certain settings must be made.

In the tablet:

In computer:

    After completing all the settings in the tablet, click the "Computer" section in the "Start" menu. If the previous steps were performed correctly, then two new removable drives will appear in the row of available drives. One of them is the memory section of the tablet itself, the second is the memory card section.

Connecting a tablet to iOs

If it's an iPad? It is these laptops that are synchronized with only through a special program, but they are computers. IPad, like iPhone, can transfer files using iTunce, a special software product developed by Apple. It is available online for free download. To connect an iPad, you also need a USB connector.

    Download and install the iTunce software.

    Connect the cable between your computer and iPad.

    Start iTunce if the program is not configured to autostart. Click on the appeared in the right upper corner icon that says "iPad". The program window will change. Synchronization will appear in the lower right corner.

    Synchronize your tablet with your computer. From the same menu you can update software, create backup working condition of the laptop.

And only after synchronization is the tablet ready to exchange files with the computer. For each type of multimedia: sounds, music, movies, as well as various information: calendars, Accounts Mail - iTunce has its own menu sections. Such a connection seems initially complicated, but this program is good in that without the participation of a tablet, you can organize all the data and various files by simply adding them to it. And by syncing in a few minutes, update the content of the iPad.

As you can see, the question of how to connect a tablet to a computer is easier to solve with laptops on Android than on iOs. But it is with the latest operating system that time is saved.

Happy connection!

One of the first problems that appear before users who have just bought a tablet is connecting the tablet to a computer. Many users simply do not know how to connect a tablet to a computer in order to copy their favorite music or movies to it. In this article, we will consider two of the simplest and quick ways connections.

How to connect a tablet to a computer via USB

The easiest way to connect your tablet to a computer is to connect when USB help cable. Connecting a tablet using a USB cable is a very simple procedure. All you need is a Micro USB cable. Usually such a cable comes with the tablet itself. If there is no cable, you can purchase it separately.

One side this cable you need to connect to your computer and the other to your tablet. Once connected, the computer should emit a beep to indicate that the tablet has been detected. After that, a new disk should appear in the "My Computer" window.

And on the tablet, in the notification area, a message about successful connection to the computer should appear.

That's it, the connection of the tablet to the computer via USB can be considered complete. Then you can work with the tablet as with a regular USB flash drive.

If after connecting sound signal is not present and nothing appears in the "My Computer" window, then, most likely, something is wrong with the tablet settings. Open Android settings and go to the "Memory" section. Here you need to click on the button with three dots and open the item " USB connection to the computer ".

This will open a window with settings for connecting to a computer. Here you need to enable the "Media Device (MTP)" function.

After that, the connection to the computer should proceed normally.

How to connect a tablet to a computer via WiFi

You can also connect your tablet to your computer using a wireless Wifi networks... In this case, you will not need USB, but you will have to install special application to the tablet.

For example, you can use the WiFi File Transfer app. Principle of operation of this application very simple. A small web server runs on your tablet. With this web server, you can manage files on your tablet from any computer that is connected to the same local network.

So, in order to connect your tablet to your computer using WiFi File Transfer, this program you need to start on the tablet, and then click on the "Start" button.

After that, you need to open a browser on any computer (connected to the same local network) and enter the address of the web server that was given to you WiFi program File Transfer. As a result, a small file manager should open in the browser.

With the help of this file manager you will be able to transfer files from computer to tablet and vice versa.

How do I connect my tablet to my computer via USB, WI-FI or the Internet? In fact, everything is simple and does not require a lot of knowledge in the field of gadgets, programs and personal computers... Such a task is simply not even possible to cope with. advanced user... Of course, there are some nuances. So, for example, sometimes you need special software, adapters, cords or equipment. But in most cases, the connection is fast with what you already have.

Connecting your tablet with a cord

Although most tablets are equipped with a USB interface (micro and mini incl.), Sometimes there are other types of connectors. Among them, PIN connectors are popular. There are also specific types of interfaces designed for a specific gadget, product series, or company as a whole. Connecting two devices - a computer and a MID - is not a problem, but to get more benefit from such a connection, you need to make certain settings. If in Apple products everything is solved by means of iTunes programs, then Android needs some tweaking. There is a menu in "Options" called "For Developers". This is where you need to enable USB Debugging. In the future, it will allow not only using MID as a USB flash drive, but also performing specific actions. For example, you will be able to install applications directly.

To be more convincing, restart your device. Connect with a desktop (or laptop). The latter will start looking for drivers, but this process is not necessary, so we can safely interrupt it. A pop-up window near the clock serves as evidence of the search for drivers (in Win.7-8). Click on it and cancel the search. Next, we turn to the touchscreen microcomputer. By this time, the USB icon should appear. It must, of course, be pressed. There may be another option: a screen with the inscription "USB connection established" and the "Enable USB storage" button. There may be other options in different wizards, but the essence is clear. We include. All of the above applies only to Android devices.

But what about Apple tablets? To connect a tablet to a PC, you will need special software, as mentioned above. Download iTunes from the Internet, install it and go through the registration procedure. At the first launch, the program will automatically detect the model of your iPad and establish a connection with it. The iTunes interface will offer you a wide range of possible actions - from simple syncing to direct installation of applications.

There are tablets with other OS, where you must first install a driver to connect the tablet to a computer or special software. Although they are rare, they do occur. You can configure data transfer without drivers, but not in a direct way. More on this below.

Connecting via Wi-Fi connections

There is no simpler option. In particular, if the tablet is not connected to the computer via USB-USB, PIN24-USB (or other) -cable. iPad connects via Wi-Fi using the same program, but in Android things are not so simple. So, for normal data transfer, there are several options. The easiest one is to download and install an FTP server. For example, the application FTP Server... Its regular version is offered completely free of charge on Play Market... The program, although not unique, is super easy to use. After starting, you just need to click the "Start Server" button. However, before starting to use, make sure that the "Anonymous user" option is active. When the server starts up, the display will show its address. You need to drive it into the address bar of Explorer or create an ftp connection in the file manager ( Total commander, for example). That's it, now you have the knowledge of how to connect a tablet to a PC, transfer information, as before, but without a lanyard.

But if the gadget on Android needs to be synchronized, do you need to write a message through it or perform some other actions? In this case, another primitive but very useful program will help us - AirDroid. In order to open all the possibilities, you need to go through the registration process at the invitation of the developers and pay a little. True, and free version will more than satisfy the needs of the average user. Download and install AirDroid from the market. When you launch the application, you will see the IP address. Typically 192.168.1.101.

Open any browser at hand (IE or Opera) and enter the IP given by Air Droid in the address line. A specific interface will open, allowing you to do a lot of things with your phone without holding it in your hands and without connecting it with a cable.

Internet connection

The easiest and most convenient way to transfer data over the Internet is DropBox. it virtual storage, information on which can be both closed and open. At the same time, you can choose to open access to the data. The main thing is that you will be able to simply send a link to the file to your friends or colleagues, and they will already download it, without loading your Internet traffic in return. But, we are about something else. Download and install applications on all your devices - computers, tablets and laptops, on your phone. DropBox can be opened even in a browser window, but it is better to use the application. The service is adapted absolutely for all operating systems, so you can install it on any device. Now, no matter what device you add the file to, it will be displayed automatically on everyone. Again: this way you can only transfer data. To have a full connection of the tablet to the computer, you have to put the program more seriously. TeamViewer and Radmin remain the leaders in this category.

Install the program on both desktop and MID. Once launched, the program will issue a unique ID and key. Enter this data into a tablet anywhere in the world and you will literally control your computer from the tablet. Move the mouse, open windows, perform actions with files, up to deletion. You can remotely install programs and even watch movies from your hard drive. Naturally, there is a function of direct data transfer between the two devices.

How to connect a tablet to a computer: Video

It's easy to thank - click on any of the social media buttons

kingdia.com

How to connect a tablet to a laptop and transfer files via Bluetooth

Good day.

Connecting a tablet to a laptop and transferring files from it is as easy as shelling pears, just use a regular USB cable. But it sometimes happens that the coveted cable is not with you (for example, you are visiting ...), but you need to transfer the files. What to do?

Almost all modern laptops and tablets support Bluetooth (a type of wireless communication between devices). In this short article, I want to consider step by step setup Bluetooth connection between tablet and laptop. So...

Note: The article contains photos from an Android tablet (the most popular OS on tablets), a Windows 10 laptop.

Connecting a tablet to a laptop

1) Turn on Bluetooth

The first thing to do is turn on Bluetooth tablet and go to its settings (see Fig. 1).


Rice. 1. Enabling Blutooth on the tablet.


Rice. 2. We see other devices ..

3) Turning on the laptop ...

Then turn on the laptop and and detect Bluetooth devices... In the list of found (and the tablet should be found), left-click on the device to start setting up communication with it.

Note.

1. If you do not have drivers for a Bluetooth adapter, I recommend this article: http://pcpro100.info/obnovleniya-drayverov/.

2. To go to Bluetooth settings in Windows 10 - open the START menu and select the "Options" tab. Next, open the "Devices" section, then the "Bluetooth" subsection.


Rice. 3. Search for a device (tablet)

4) Bundle of devices

If everything went as it should, the "Link" button should appear, as in fig. 4. Press this button to start the linking process.


Rice. 4. Link devices


Rice. 5. Comparison of codes. The code is on the laptop.


Rice. 6. Passcode on the tablet

6) Devices are connected to each other.

You can proceed to transfer files.


Rice. 7. Devices are paired.

Transfer files from tablet to laptop via Bluetooth

Transferring files over Bluetooth is easy. As a rule, everything happens quite quickly: on one device you need to send files, on another to receive them. Let's take a closer look.

1) Sending or receiving files (Windows 10)


Rice. 8. Accept files from Android.

2) Receive files

In my example, I transfer files from a tablet to a laptop - so I select the "Receive files" option (see Fig. 9). If you need to send files from laptop to tablet, then select "Send Files".


Rice. 9. Accept files


Rice. 10. File selection and transfer.


Rice. 11. What to use for transmission

5) File transfer process

Then the file transfer process will begin. Just waiting (file transfer rates are generally not the fastest) ...

But Bluetooth has an important advantage: it is supported by many devices (that is, your photos, for example, can be dropped or transferred to "any" modern device); no need to carry cables with you ...


Rice. 12. Bluetooth file transfer process

6) Choosing a location to save

The last step is to select a folder where the transferred files will be saved. There is nothing to comment on ...


Rice. 13. Selecting the destination for saving received files

Actually, this completes the configuration of this wireless connection. Happy work 🙂

Social buttons:

pcpro100.info

How to connect your tablet to your computer | New tablets

The most common problem after purchasing a tablet is connecting it to a computer. What is it for? To copy to device interesting game or some kind of movie. But to do this, you need to know how to connect your tablet to your computer.

There are a couple of basic ways to connect:

Both methods are not difficult. You need to choose which one suits you best.

How to connect a tablet to a computer via USB

The first method is to connect the tablet to a computer via USB. This is one of the simplest ways to connect it. You take a micro-USB cable. It should come with your gadget. When it's not there, you have to buy it at any electronics store. We take our cable and connect it to the tablet on one side, and to the laptop on the other.

After connecting, hear the PC beep. This will inform you that the device has been detected. Then on your PC you will see that additional disk... An information window will appear on the screen of your tablet, indicating that the connection to the computer has occurred.

Now you can with mobile gadget work with both external drive... Here is such easy way connecting an Android tablet to a computer via a USB cable.

Pay attention ... In the case when, after connecting, you did not hear the sound of the connection and there are no new devices on the computer, then you need to check the parameters on the tablet. Open the settings, then go to the memory tab. It is here that you find the value "USB connection to a computer" and click on the button with the ellipsis. Then a tab with settings will open in front of you. Turn on the "media device" function. And click "Enable USB Drive". Finally, you should already have your tablet connected to your computer.

How to connect a tablet to a computer via WiFi

The second way is to connect your tablet to your computer via WiFi. To connect a tablet to a computer via wireless communication WIFI, the program for connecting the tablet to the computer will help you. You need to download and install it.

Let's use software like WI-FI_FILE_TRANSFER. This program is very easy to use. WEB - SERVER is launched on your tablet. With it, you can edit files on the gadget from a regular PC or laptop. Of course, this is only possible when the computer is connected to the same mesh. To connect your tablet to your computer using the "Wi-Fi File Transver" application, you need to run this program on your tablet. Then click on the "Start" button.

The application should start WEB - SERVER. Next, it will display the URL to connect.

Having learned the address, you need to launch the browser on the computer that is connected to the same LAN and enter the URL received in the software. Next, a special File Transfer window will open. It is with its help that you can be guided by the files, transferring them from mobile device to a computer and exactly the opposite.

There are two very easy ways connections of the tablet to the computer exist. Good luck.

novinki-planshetov.ru

How to connect a tablet to a computer

Many users don't know how to connect a tablet to a computer via USB or WiFi. It does not matter at all for what purpose they need it, be it for recording music, films, programs, data synchronization, etc. This article details how to connect your Android tablet to your computer.

Tablet - a new variety modern computers... A distinctive feature of the tablet computer is its compact size and touch screen.

The tablet screen is the only input device. Traditionally, there is no mouse, no keyboard, or even a touchpad like a laptop. However, more and more tablets are sold with docking stations or are equipped with ports for connecting them.

By connecting the tablet with add. device, it can be turned into, say, a netbook. Convenient, isn't it?

WITH appearance sorted out the tablet. Now let's look at how to connect it to a computer. You guessed it, there are not so many of them: via USB or WiFi.

Connecting Android Tablet to Computer via USB

First of all, make sure your device is equipped with USB or Micro-USB connectors. Unfortunately, such entrances are not available everywhere. If your device does not have USB, go to the next step: connecting the tablet to a computer via WiFi.

To synchronize the tablet with a computer via USB, just connect them with a cable, which is often included in the kit. This procedure is in many ways similar to connecting a USB flash drive to a PC, and it should not cause any difficulties.

If you don't have a cable, check the package contents mobile phone... Many modern phones are equipped with Micro-USB connectors, therefore, such cables are often included in the kit.

The procedure is as follows:

  1. Find the required connector on the side of the tablet. Found it? Take a USB cable and connect your tablet to your computer.
  1. A USB icon appears on the tablet screen to indicate that the device is connected.

  1. Go to My Computer, on your PC, and next to the removable media, find the connected device. That's it, now you can write and delete files from the tablet, manage it like a USB flash drive.

The computer does not see the tablet - this can happen the first time it is connected. It may take a while for the computer to find and install the required drivers. Therefore, your tablet may not be detected immediately, but after a while. You may need to find drivers on the device manufacturer's website.

Connecting the tablet to the computer via WiFi

The second method - connecting the tablet to a computer via WiFi has a number of advantages:

  • You don't need a USB connector to connect your tablet.
  • You are not limited by the length of the cable, i.e. you can work at relatively large distances from one of the devices.

To connect android tablet with a computer via WiFi go to Google play, then download and install the KiesAir app (for SAMSUNG) or WiFi Transfer. Also, you can use another application, but please note that not all programs are compatible with all tablet models.

We will use the second WiFi app Transfer, you can download it for free from Google Play. In our case, to check synchronization with a computer via WiFi, we will use Acer tablet Iconia tab A500.

After downloading and running the application, the following window will appear on the tablet.

Pay attention to the FTP address and WLAN Status - we will need them to connect the tablet to the computer.

Sequencing:

  1. We open any FTP client for example Total Commander.
  2. Go to the Network menu - Connect to FTP server.
  3. In the window that opens, click Add.
  4. Coming up with a name for the connection.
  5. In the line server [Port], write the FTP address and click OK at the bottom of the window.
  6. During the connection, a dialog box will appear in which you need to enter a Username - enter the WLAN Status value here, in our case it is Dlink. The Password field can be left blank.

After a while, the computer will connect to the tablet, and the Acer Iconia Tab A500 folders will be displayed in the active area of ​​Total Commander. In your case, you will see the contents of your tablet.

That's all, now you know how to connect your tablet to your computer via USB and WiFi. It won't take you much time to sync these devices.

where-money.com

How to connect tablet to computer via USB cable?

One way to exchange files between your tablet and computer is to connect your tablet to your computer via a usb cable. We can say that this is the easiest way to exchange music, movies, text and other files, since the cable is always available with the tablet. Regardless of the tablet model and its manufacturer, the connection method will always be the same. The only thing that may be different is the additional software that is designed to facilitate this process, making it more colorful and understandable.

To plug Tablet PC to a stationary one is easy and simple, but in rare cases there are problems with connection. Despite the variety of manufacturers (Asus, Explay, Samsung, etc.), all these tablets have operating system Android. Sometimes it happens that the computer does not see the tablet that used to work. In this article, everything is described in detail about all possible problems and their solutions.

Problems and solutions when connecting the tablet to the computer

For a faster diagnosis, you need to find out what could lead to this. First of all, to clarify the problem, you need to know for sure: the device is connected to the PC for the first time, or it was previously connected and at the same time worked. If the first option, then perhaps the PC does not see the tablet due to the lack of drivers.

WIDNOWS XP

First you need to download the latest Windows update xp, or, much easier, try installing the MTP driver.

MTP installation package on the Microsoft website

After downloading the driver, launch it and restart your computer. This method may solve the problem on older computers. If this method did not help, then the option remains to update Windows xp.

Tablets with a home screen lock graphic key must be unlocked during pairing.

WINDOWS 7 and newer

Now you can look at the problem on newer operating systems. This requires:

  1. Connect the tablet cable with a USB cable.
  2. Check the message on your tablet. We need to make sure that there is another one in addition to the charging mode.
  3. If a message is displayed that says "Charging Mode", you must click on that notification.
  4. V open window, click on the item "USB-storage", this function may be called "Camera RTR".
  5. While the tablet is connected in the "RTR Camera" mode, in the tablet settings, click the "Media device (MTP)" item.

Setting up file transfer

If the device is in USB tethering mode, it will not be displayed on the computer. This mode must be disabled when pairing.

Alternative

If the tablet does not see the computer through the standard usb cable then it is worth trying the following steps:

  • Connect the USB cable to the laptop into the rear connector. Rather, it will use the v connector. 2.0. They differ externally from version 3.0 in color (blue is USB 3.0). The connectors are found mainly on the back of the computer. On a laptop, the connector version is usually indicated on the side panel, next to it.

Left USB 2.0, Right USB 3.0

  • Check the slot on the tablet to see if it is dirty or has been recently replaced. Another problem may lie in the inoperability of the nest due to dust. In this case, clean the socket yourself, and if water gets into the connector, you will have to replace the adapter with another one at a service center.
  • Use “microUSB to USB” cords from your smartphone or other tablet. The cause of the breakdown may well be in the cable.
  • If it is possible to connect devices to a laptop, then try connecting them to it. If everything works there, then you need to check the USB functionality on the laptop, for example, using a USB drive, USB mouse or USB keyboard. Without positive result you need to go to "PU", then go to "Troubleshooting", and then to "Configure equipment" and then click "fix automatically".
  • Update the hardware drivers on Windows. This can also be a solution to the problem. Open "Computer Properties", and then open "Device Manager".

"Device Manager" in the column to the left

  • Then connect the cable from the tablet to the PC. The gadget should be added to the menu. Select it and click RMB, in the list that opens, click "Update drivers". You cannot update the driver without the Internet. Also try updating the driver from the disc supplied with the gadget.
  • Sometimes a "!" Appears opposite the gadget in the "Device Manager", which means that there is no software for it, or there are problems with the drivers. They need to be updated.
  • On older android devices, you must select special treatment connection to a PC. Typically, the tablet displays a connection message. If it is not there, disconnect the equipment from the PC and check the presence of such an item in the settings.

Turn on USB storage

  • Antivirus activity. As a rule, when new devices are discovered, antivirus program perceives this activity as a dangerous process. Therefore, for the period of connecting the tablet to the laptop, turn off the antivirus or suspend its work. Also, try turning off your firewall and security tools.

Warranty repair

If none of the above options helped, and the device has a warranty, then contact the repair center or store where you purchased the tablet. The technician should fix the problem or issue a new gadget with a warranty card.

In case of an expiration of the warranty period, problems of connecting the tablet to a PC, it depends on physical defects (the connector on the tablet, its connection to motherboard etc.) or if the user does not have a particular desire to tinker with the settings, then you can transfer files to the computer in another way:

  • Popular apps like AirDroid (Lightweight File Transfer App).
  • Creating an FTP server, on a tablet it is easy to create a server through the ES FILE MANAGER application, and on a computer using the Windows OS interface.
  • Pairing via Google drive... On your tablet and computer, use the appropriate official app from the developers.

SIMILAR ARTICLES