Any modern user a stationary PC or laptop, of course, uses its device not only to work with any documents or software, but also for entertainment (listening to music, watching video, passing games, etc.). Naturally, on the same stationary terminal, the built-in system speaker for playback of the sound is not suitable.

To any computer device to obtain high-quality sound, an external speaker system must be attached. But how to connect columns to a computer with Windows on board? This question may seem like easy enough, they say, what's the difficult thing? Stick plugs in the nests - and that's it. In fact, there may be a lot of problems with connecting. To attach a little acoustic. It is necessary that she also sounded! On how to do it, then the conversation will go.

Main types of columns, soundcart and ways to connect

To begin with, we will briefly focus on the main and sound cards, since it is from this that the connection type or the speaker setting may depend on a very high degree. Usually, either passive or active columns are used for PCs and laptops.

The first type is most primitive. For it, it is necessary to serve food separately. But when connecting such systems at best, you will only get stereo. Active systems with a separate power supply, in addition to the main speakers, may also include a subwoofer (special playback column low frequencies). It is she who is powered. In addition, on some models you can find the microphone sockets, which eliminates the user from using a built-in microphone on a laptop or directly connecting the device to the sound card.

Recently, wireless wireless has been particularly popular for connecting a special Bluetooth radio module.

Among the soundcart (devices for sound output on speakers), you can find three main types: integrated, installed on the motherboard and external (most often connected via USB).

Note: Acoustics are optionally connected directly to the signal source (sound card). You can use intermediate devices like amplifiers, DVD players, music centers, etc.

How to connect columns Computer: Standard Scheme

Now let's go directly to the accession of acoustics to computer system. How to connect columns to a computer according to the standard diagram? Elementary!

You just need to insert the plugs into the corresponding sockets on the soundcard. It is almost impossible to make a mistake with the attachment, since the inputs and outputs on the sound card, as well as the plugs of the speakers are painted into the appropriate colors.

Connecting acoustic systems to laptops

In laptops due to the fact that most of the models are equipped exclusively integrated sound cards, directly connecting acoustics can be performed through the headphone output.

However, in this case, special attention should be paid to the compliance of the resistance to the exit on the laptop and the speakers themselves. If they do not fit together, they will receive either too weak sound when the speakers will not "swing" or a locking volume too high.

However, if we talk about how to connect the columns to the computer in the form of a laptop, optimal options You can consider using external sound cards with standard scheme Attachments or wireless systems. But in this case, the Bluetooth module should have a Bluetooth module with the drivers correctly installed for it (their absence or obsolescence often leads to the fact that the sound disappears). How to connect a bluetooth column to a computer or laptop? Here, too, everything is simple.

On both devices, first turn on through the menu of the icon showing in the system tray, the search is made wireless columnAnd then the device found is simply selected. Radius of the module wireless communication It may be limited, so do not place the speakers too far from the computer terminal.

Using an external microphone when connected to active acoustics

Now let's see how the microphone is connected to the computer columns. This can be done directly only if there is such an input on the speakers themselves. Otherwise, you will have to include a microphone or in a sound card or in the USB port, or through an intermediate device. But we assume that the input is and the microphone is connected. Immediately set its volume about half a maximum, because with an overwhelmed level of the input signal can go a press (a whistle will appear in the columns or foreign Summas). In addition, half volume is recommended to be set and if you are using karaoke or record voice.

There is no sound on the computer: how to connect speakers to appear?

We now turn to the main problems. Acoustics seem to be attached. So why there is no sound? How to connect columns to a computer, because everything is done correctly? First, pay attention to the overall volume level. If it is set to minimum or the sound is turned off, turn on the full volume.

If there is no sound when using some kind of communication program like Skype or in the browser, check the settings of the application itself, as well as after calling the mixer remote control, it is present that the volume controls for the specified programs are present, then set the desired sound level. Finally, on laptops, try changing the volume by pressing the special buttons on the keyboard panel or the key combination.

In the case of using audio, music studios or sequencers editors, make sure that you have ASIO4All drivers or related virtual devices, and at the same time check whether they are selected as the main applications themselves.

Basic settings and some important parameters

So, how to connect the columns to the computer, it seems to be clear. Now a few words about the settings. Through the "Control Panel" or through the volume icon menu, call the settings section and go to the Playl Device tab. Make sure that the sound card is active, and the properties indicate that the device is turned on (used).

Click the Levels tab and check the volume there. Just in case, disconnect all environment modules (effects) and set the desired signal strengthening level. In principle, you can take advantage of the audit audit or perform the system testing for the selected device. Finally, check the status of the sound card drivers, and if necessary, reinstall them or update using the system or third-party software for this, for example, Driver Booster (you need to connect to the Internet).

And another aspect associated with how to connect the columns to the computer. In some virtual mixers, such as ASUS, there is a possibility of switching between different types Sound output. Place the desired connection type there (digital, analog, S / PDIF). In the absence of sound on video, pay special attention to the necessary codecs and decoders. If nothing helps at all, go to bIOS Parameters And check whether the sound card is enabled in these options.

If you did not use earlier multichannel soundThe audio system of this type will significantly expand your impressions from watching movies and run games. Mark 5.1 means that we will have as many as 6 columns: 2 front, 2 rear, central and subwoofer (specifically for lower frequencies). However, there are even more advanced assemblies, for example 7.1. Below we will tell about how to connect such acoustics.

How to connect acoustics 5.1 - how to start columns

First of all, it is worth learn whether our motherboard supports a six-channel sound. All modern builds are able, but there are exceptions. In addition, it is necessary to keep in mind to which type of acoustic systems include the device under consideration. Analog columns are connected to the PC in the same way as any other, and digital functions through the SPDIF connector. Since the analog audio systems are the most common, we will focus on them. Digital devices, among the advantages, are connected to the system unit with only one wire, making much less background noise. The sequence of working with audio system 5.1 looks like this:

Unpack and consider the device to determine where and how to place them. For example, modules with control elements logically install on the table to have fast access To setting the sound. And the subwoofer with "nizami" is conveniently installed under the table.

The connection diagram can vary, depending on the design of the acoustics, however, in general, the connection of the plugs from the speakers must correspond to the signatures on the connectors of the sound card. The subwoofer is indicated by the reduction of SW), the front left and right speakers - Frontleft (FL) and FrontRight (FR), two rear - rearleft \\ right, or Surroundleft / Right (RL / RR, SL / SR, respectively). Central column - Cen.

Physical connection is made by cable "Paired Tulips - Jack 3.5". They will go like this:

• a pair of "tulips" from the front speakers, jack in a green sound card socket;
• couple from the rear speakers - in a black connector (depending on the manufacturer wire or the "socket" can be painted in blue);
• couple on Saba and Center - to orange (similar to the previous point - or yellow);
• do not forget to connect the entire system to the network;
• pay close attention to which section are "tulips", it must be designated as "Audio Input 5.1", but not "Audio Output".

Another connection option is possible if there is not enough connectors on the PC to attach the second pair of columns and saba \\ center. In this case:

• the front speakers connect to a green jack;
• rear - to blue or black;
• subwoofer and central device - to a pink inlet designed for a microphone (as a result - if a microphone is required, the sub-sab must be disabled).

How to connect acoustics 5.1 on PC

Some settings will be done on the computer:

• we go to the "Control Panel" -\u003e "Equipment and Sound";
• select the section "Sound" -\u003e "Dynamics";
• click "set up";
• we find the item "Volume Sound 5.1" and click on it;
• the audio system will be activated.

It is also convenient to use Realtek Audio. Manager:

• we go into the program;
• on the Speaker Configuration tab, select 5.1 from the drop-down list;
• we save the changes to the "OK" button.

To connect acoustics to the DVD player, TV or other technique, you will need an adapter (for example Mini Jack - Stereo RCA).

If you notice an error, outdated or not working link or want to leave your recommendations, select the necessary text and press Shift + Enter

Lessons - how the computer works

Added Anton 04/12/14 00:00

To enjoy your favorite music or movie with a computer, you need to connect columns or headphones (it is first-in-speed), and then install the drivers, if necessary, then install required programs and run the music or movie file, respectively. But all in order! Let's first connect everything you need to play sound, be it headphones, headset or speakers. The article has many photos, it will be easy to understand. Connect the column cable to the speaker connector and headphones, also called the Line-Out / Speaker-Out connector (linear output), it is green. This is already familiar with a mini jack connector, see photo: Also, the speakers have a power cable to be connected to the network, but some low-power models are connected not to the network, but to the USB connector, that is, they will not have the usual fork. I have on home computer Just such speakers, see photo: Also right on the dynamics can be input to connect headphones (it is convenient, if you need to quickly switch from the headphones from the speakers, so as not to interfere with other people in the room with loud music, for example), and also will definitely be a switch-switch and volume control that may be Combined with a switch, and represent, for example, a wheel, which, when turning, reduces the volume and turns off the speakers with a minimum volume, which is accompanied by a click. So done on columns that are in the photo above. However, there are columns that are powered and transmitted sound uSB cable. As a rule, it is a portable small speakers for laptops that you can take with you on the road. That is, B. this case You need to connect only one cable. Here is an example of such a device in the photo: The computer also most likely there will be a LINE IN connector (linear input) - a blue connector to which you can connect the input device, but not a microphone, and the player, for example. In some cases, this connector may duplicate a linear output. In the photo you can see a cable for connecting the player (this is my old second player (the first cassette), the amount of memory is only 256 megabytes (read what megabytes are). Now it is only for photos for the article \u003d) How to connect headphones with a microphone (headset) to a computer Headphones with a microphone that are connected to the computer are called a headset. It is very convenient to use if you need to communicate with a voice using the Internet, write your own voice, play in computer games With a comrade to talk. In particular, I use the headset to record video tutorials. Here are some of them: What is browser How to remove advertising on the Internet But the headset looks like, look in the photo: On the left on the rim you can see the microphone in the folded state, you can see the thickening on the wire: there is a headphone volume control and clip for consolidation on clothing. If you need to connect the headset to the computer, then there should be no problems here, since the headset has 2 cables: one as for the speakers, to play the sound, and the other for the microphone (with the connection of the microphone already disassembled in this article). They need to be connected to the appropriate connectors discussed above. See what they look: As you can see, there are pictograms on the connectors so that it is easier to figure it out. Also the headset, like the other above audio devices, can be equipped with a USB connector, which reduces its connection to the USB connector search on your computer and connect to the audio device. On modern computers, the microphone and speaker connectors are usually duplicated on the front panel. system BlockIt is very convenient if you need to connect the headset - you do not have to climb the system unit. On the headset, the wires will be marked accordingly, that is, red (pink) connect to the microphone input (of the same color or marked with an icon), and green, respectively, in the line input in which the speakers are connected.

I have on the old computer, for example, in order to work the front connectors it was necessary to connect the conclusions behind, there were wiring there, and one of them did not coincide with the color, but the exclusion method was easy to guess where to connect it. It was inconvenient and had to do like this:

On my new computer, you do not need to switch anything and connectors there are both in front and rear. The speakers are constantly connected from behind, and the rank is connected in the front, if you need to communicate through the Internet. In essence, these wiring is just an extension. It can, by the way, purchase it if you have inputs for the microphone and speakers just from behind, then you can connect it to the rear connector, fasten somewhere closer and available, because it is inconvenient to the rear wall of the system unit. This is what the extensionist looks like:

There is an extension about 4 to $ 20. The cost depends depends on the manufacturer of course from the length that can vary approximately within 1m - 10 m (can be found more). It is called the correct "Jack-Jack extension", and depending on the type of connector can be signed as:

The minijack-minijack extension or might be marked by a 4-mm minijack-minijack extension, or you can meet such a mark, an example of designation in one of the stores:

SPARKS SN1033 headphone extension cable 3.5 (M) - Jack 3.5 (f), 3m - In general, this is a mini-jack, it tells us a diameter of 3.5 millimeters (how to distinguish Jack from the minijka), and in brackets - This designation (M) MALE is the "dad" connector and (f) Female - the "Mom" connector. It is such an extension that you will use if you lack the length of the cable of headphones, headset, columns. You can search on the Internet or asking in the store and as simple "headphone extension" - you will be helped.

Jack-Jack extension can be useful for some types of headphones, an example name:

Headphone extension cable, line, 1/4 "TRS Jack (Dad) - 1/4" TRS Jack (Mom)

the type of connector is specified (1/4 inches - Jack) and the type of extension cord: "Dad" - "Mom"

if you need to connect the guitar, then you need a "dad" cable - "dad"

Also that the wires do not interfere with and have not reversed with a bend and served a long time, there are an adapter with a corner, which are indispensable if the rear wall of the system unit costs quite close to the wall and the wire is driving (although the system unit should not stand close to the wall so that the air exchange is not hampered ). By the way, such an adapter can simplify connection to the rear panel of the system unit, since it does not have to move, but you can connect from the side. On the photo just such transitions:

Honestly, on sale I met them just a couple of times, although in some cases it is definitely useful.

How to connect speakers and microphone to laptop

On laptops are usually only two connectors: to connect speakers and connect columns. Most often, in front or on the side, the color may not be labeled, but then you will definitely be marked by an icon, no one will be confused by anyone (the pictograms are most often used). See in the photo: The necessary connectors are indicated by pictograms:

And if you owner portable speakersconnected to usb, then you need to look for this particular connector. In the photo shown above, it is just the left of the microphone connector.

What if I have only one connector for connecting the headset / headphone / microphone in the laptop?

This question is increasingly can be found on the forums and in the comments. Yes, indeed, in many modern laptops, netbooks and ultrabooks have only one headroom combined audio connector, instead of the usual two. For example, in modern ultrabook ThinkPad X1 Carbon UltraBook only one connector:

What to do? We understand!

First Tip: Carefully read the instructions so as not to spoil the port! You may not be connected to the microphone into the connector, but you can connect the headset or just headphones. There are models in which you can connect either headphones or a microphone, but you need to read in the instructions that you can connect, and what not! Here is an example: in the picture page instructions for Lenovo S100. It says that you can connect the headset, you can connect headphones, but you cannot connect the usual microphone!

So, you need to work with the headset, what to do? The solution depends on what kind of headset you have.

1) If you have a USB headset, then everything is simple: connect it to the USB connector.

2) If you have a regular headset, as described in the article above, then you need an adapter with a 4-pin 3.5 mm jack on headphones and a microphone, which will be a special four-pin connector ("headset"), designed for a combined headset device, for example Gembird CCA-417 adapter. The 4-hour connector will have 3 strips:

3) You can simply buy a special headset with a combo, for this we will drive on Yandex.Market or search "MINI JACK 3.5 MM Combo headset" The choice is large enough with prices from $ 10 to $ 100 and more
You can also purchase a "native" headset from the manufacturer of your laptop / netbook. Here, for example, a headset for Lenovo Thinkpad.. It is attached to the laptop adapter with two connectors (the opposite is what we have considered in paragraph 2) and the case. On the official site of Lenovo, such a headset costs about $ 20.

In all cases, in addition to connecting the device, the following steps must also be performed:

• install a sound card driver if necessary
• configure (meaning configuration in Windows) - If someone has problems with this item (the microphone or column does not work after connection), then write in the comments which device which computer and the operating system may need a separate article. .

Well, on this all, pleasant listening to music, watching movies and communicating with your relatives on Skype!

From this article you learned:

• How to connect speakers (speakers) to computer
• How to connect a headset or headphones to a computer
• How to connect headset, headphones, speakers to laptop

Be sure to check if the letter did not fall in spam!

kKG.BY.

How to connect columns to a computer

High quality sound is very important for modern computers - In stationary models there are no speakers at all, which means their connection is necessary, but they have laptops, but not always in the desired quality, as well as the tablets.

In order for when working on a desktop, listen to your favorite music or sound, from movies or TV shows, first of all, connect the reproducing device, and after starting the installation of the drivers. Now it will be described in detail how to connect the columns to the computer.

Connection to PC

When connecting conventional stereocolones, there should be no problems at all - only two wires are connected here, and only one of them to the computer (in most cases).

The speakers are connected by the minijack connector of the green color to the corresponding output on the system unit - it is important not to confuse the colors, otherwise nothing will work. The second cable is responsible for the nutrition of the speakers. In some cases sound devices Can connect to a computer and via USB - this replaces the usual plug.

On ordinary audio cards there are three connections - for speakers, microphone and additional speakers. This is done to connect surround sound systems - for example, for the most modern systems 5.1, there will be many connectors, and on old computers, and even more so on laptops there are simply no such quantity.

Such a complex system requires some skills, but in the end there is nothing complicated there - all the colors of the plugs correspond to the colors of those connectors in which they should come in, so there should be no problems. Naturally, after the system is connected, and the driver is installed, in the settings you need to turn on the sound playback system for an acoustic system 5.1 - otherwise there will be not all speakers.

Check all speakers

To check all connected speakers, you must install the drivers of your sound card. If you did not buy a separate audio card, you can find the drivers on the manufacturer's website motherboard.

So, open the sound card software, connect the columns and set the desired settings. Next, click the check start button. The program sends separately to each column sounds and you can hear whether all the columns work. If it turns out that some of them does not work, you must set other settings or check the connection to the sound card. Repeat this procedure until you find the right connection option.

Connect to laptop

How to connect columns to a computer, it's not even a question, but the case of a couple of minutes. Everything becomes more complicated when it comes to a laptop - usually there are only two connectors there, but it is true only for ordinary models. If you have a Ultrabook in your hands, then the connector is only one, which means that the system cannot be connected.

Although there is still a yield - you can buy speakers with a connection exclusively via USB. Such models are found not often, but you can still find them. In addition, you can simply purchase an adapter that allows you to connect several cables of the minijack to one jack. There are more exotic options - for example, a combined plug, which is connected immediately all the system, but they are not too effective.

How to connect the speakers to Mac

In general, this technique from EPL can connect to a variety of audio systems - thanks to Bluetooth technology. However, there is a standard 3.5 mm connector on a laptop.

The easiest way, as already mentioned, is to purchase speakers with a Bluetooth adapter - this allows you to largely win, for example, the lack of wires that can be broken or intimidated.

The setup of the hardware connected in this way takes a little time - just after connecting to enter the "Audio" menu, and select as a preferred audio device connected column, or a whole speaker system.

You can also connect the columns to the headphone connector - this will significantly limit the poppy mobility, but in this way you can save time and money on the device with a Bluetooth adapter. But here you will need to take care of the wires - they should not bend, move or pass under the computer itself.

Connecting to tablets on the Android system

Naturally, if the tablet has an output for headphones 3.5 mm, then you can connect the speakers regardless of which operating system on it is installed.

Nevertheless, there is one small "but" - columns must have their own amplifier. If this is not, it is quite realistic to burn an audio planet amplifier - it is not intended for such loads.

In addition, if the power column occurs uSB connectionSome problems may occur - this connector is usually absent on the tablets. But the problem is solved - you can purchase an adapter from the micro USB to normal and connect the power to the tablet, or the adapter from the connector to the socket fork. Despite the reality of such solutions, it is best to buy for a tablet speaker on a battery or batteries - it will be best.

feetch.com.

How to connect columns to a computer? No sound and what to do in this case?

The sound output device is an integral component when working with a computer. Usually, the connection of such devices does not cause completely no problems, but how to do if the problems still have any problems? How to connect columns to a computer? No sound is the most common problem when conjugating the audio system with PC. But what caused problems? It must be sorted out. In order to find a solution to the problem, you need to get acquainted with the causes of this problem. Options may be a lot, and everyone needs to know about each of them. Today we will talk about six reasons for the absence of sound.

• There are such incidents when the user in a hurry just forgets about the wires.
• There is a high probability that the connection is made incorrectly. In other words, the wires are connected not to the entrance. The bottom line is that the personal computer audio card has several conclusions: for recording devices and for sound output devices. The release for the microphone has a pink color, and for the columns is green. Cool on this attention to confuse anything.
• Also, the inputs could also simply be overwhelmed due to frequent operation. To fix it, just correct them. At the same time, it would not hurt to clean the connectors from dust.
• Look at the front panel of audio equipment. If the LEDs are not glow, the columns themselves do not eat. Sometimes users simply forget to turn on the device.

Of course, all the above problems are elementary, but most often problems are associated with it.

1. Press the "Start" key and go to the "Control Panel". There you need to find the section "Equipment and Sounds".
2. Now you need to go to the "Sounds" tab. Your audio device is displayed here, which is connected to a computer. Highlight the mouse cursor the desired speakers and open their properties.
3. You must turn around the General tab, in which you need to make sure that the devices are defined and included.
4. Next, go to the "Levels" tab. There will be a current volume amplification, which should be more than 80-90%.
5. Go to the "Advanced" tab and activate audio test. If you did not hear anything, save the settings and move on.
6. Try returning to the "Volume Settings" and look at the sound level. It is possible, it is turned off or removed to a minimum.
7. Right-click on the dynamics label, which is located in the lower right corner near time. Check the current volume level there.

Important! Do not forget about the columns themselves. There is a chance that the volume control is set to a minimum.

• Visit the Device Manager, which is located inside the control panel. You need a "sound, game and video devices" tab. If the audio card is connected to the computer, it should be displayed here.
• If a yellow or red icon is standing opposite the devices, then the driver is faulty or is completely absent. We recommend using the Everest program. With it, you can find out the model of your board and download the necessary software for speakers.
• It happens that the card is installed, but the Windows operating system does not want to see it. The root of such a problem can be anywhere. It is possible that the device is faulty or incorrectly connected.

Important! Most the best way - It is cleaned by a system unit from dust and blow a slot. In other words, the problem is associated with the computer hardware, and if the cleaning does not help you, we recommend using the services of a specialist.

• You may have no codecs on personal Computer. Try to download and install "K-Lite Codec Pack". Included with codecs, you will also get a good player.
• Wrong bIOS setup. Try to restart the PC and click F2 or DEL while switching on. You will open the BIOS menu in which you want to find the "Equipment" tab (the name of the tab depends on bIOS version) And turn on the audio card if it has not been enabled. Save the settings and run Windows.
• Viral files or malicious software. It happens that the virus prevents enjoying his favorite music. The solution here is quite simple - it is necessary to take advantage of any antivirus program.

This information Must help you to set speakers on your computer. Do not hurry and be careful, then you will definitely succeed.

serviceyard.net

How to connect columns from the music center to a computer without center?

Currently, homework, consisting of musical centers, does not find a wide application and safely dust on the cabinets of the premises. In this regard, it seems that it seems to be how it has already served his age. But the equipment for playing music is high-quality and pretty expensive, so it is a pity to send such equipment on the garbage. Our article Consider the options for alternative use of the device to play music, for example, how to connect a column to a computer from the music center without center.

To content

How to connect speakers from a working music center to a computer?

Let us ask yourself how to actually make the connection of the speakers from the stereo system to the PC. It turns out that it is quite possible. And for a functioning acoustic device, such a connection process is not at all difficulty. For this procedure, you must use only one cable, appearance Which looks like as follows:

• one side of the cable is crowned with usual black minijack by 3.5 mm;
• on the other side, two white and red tulips hang.

Important! There is nothing complicated in this cable, you can make it yourself, just for this you need to at least be able to properly hold the soldering iron. To do this, you need to find the cable itself, if it is not enough, you can apply the cord from stereo handers. The necessary plugs are purchased in any department of radio components in a modern hypermarket or on the market. As they say, and cheap, and angrily.

How to connect a column from the music center to the computer:

1. The purchased cable is connected to the AUX connector, which is located on the back of the stereo panel. These are two identical holes that have red and white.
2. The second end of the cable is connected to the opening to exit acoustic speakers on a personal computer. It is a large hole that has a green bezel. And it is almost all.
3. After that, we turn on the audio system, make the AUX mode on it.

Important! Each individual music center has its own setting, which differs from others, so to connect, you must select an individual instruction or you can try to apply the method of "scientific tyka". Maybe it will be possible to guess and correctly determine the desired mode.

Now you can easily use our advice and elementary to connect stereo speakers from the audio system to a stationary PC or to a laptop, if there is a functioning most musical center. But there are cases when equipment for music playback is inoperative, how to solve the problem in such a situation?

To content

How to connect columns from the non-working music center

This situation is much more complicated and its solution requires certain costs. The problem is that the stereo is the amplifier that feeds the speakers. Sound card power located in computer device, lacks for the rinch of acoustic speakers. So connecting columns from the music center to stationary computer Or the laptop without the very center is not so easy to implement. But probably.

For this, first of all, it is necessary to find an amplifier or make it yourself. For this purpose, both a separate device and the use of cards from old speakers are useful. The main requirement is that the power of the selected amplifier is not greater power of stereo speakers.

Important! If necessary, you can independently sold out the amplifier - this is not so difficult task. On the Internet there are a lot of ready-made schemes of any complexity and various options. The required details can be easily purchased in any radio house of the construction store.

Sometimes there is a computer acoustics in the house, which may have no function of several columns. In this case, it is necessary to clarify this power and operating voltage, conduct a comparative analysis with the acoustic speakers of the home stereo system.

Important! The required characteristics are in the instructions or on the rear panel of the audio system. If the parameters are suitable, then the task is solved, and our device can be connected.

From the above article, it can be seen that the music center released from fashion can be easily turned into computer acoustics. To do this, it is necessary to take advantage of the entrance and some advice given in our article.

serviceyard.net

How to connect columns to computer and tv

• Suppose on columns 2 RCA inputs (tulips), it is connected using the MINI JACK audio cable (Jack 3.5 mm) to 2 RCA. MINI JACK connects to the sound card (green output) if you want to use them as frontal speakers or as a stereo pair. Either using audio cable 2 RCA - 2 RCA and MINI JACK adapter on 2 RCA inputs.

• On columns of 2 terminals. In this case, you will fit the cable from any headphones with Mini Jack 3.5 mm. Cut the speakers and carefully clean the wire. Connect stripped ends in the terminals, and the Mini Jack plug into the sound card.
• Buy an inexpensive stereo amplifier, especially if you want to use speakers from in the past of a decent music center, it will justify the costs.

P.S. Special volume of sound is not achieved in this way to connect the columns to the computer, the output power will be in a few watts, since the amplifier is required for passive speakers, but at least save their columns from the foil to the trash can.

For those who are puzzled by the issue of buying a cheap receiver, an article will be interested in: "How to connect analog columns to any technique?"

How to connect columns 5.1 to a computer (active acoustics)

Connecting an active acoustic system for PC is a fairly simple occupation, so I will not spread on this topic, but still many questions arise.

It is necessary to figure out how many outputs or sockets has a sound card of your computer. As a rule, modern embedded sound cards allow you to use 7.1 shark (on the motherboard, color sockets are marked).

Green Exit - Frontal (Front) Dynamics

Orange Exit - Central Canal and Subwoofer

Black output - rear (rear) speakers

Gray output - lateral speakers (surround speakers)

Blue - linear entrance (electroacoustic guitar, player, etc.)

Pink - microphone.

Depending on this, you can connect the columns to the computer. If you decide to connect columns 5.1, then a few nests (green, orange, black) will be involved. Connect the cable with a green plug into the audio output connector (green) on the rear panel of the system unit, etc. Connect the cables to the appropriate connectors (oriented by colors) on the control module sound card, enclosing the cable into a sound card. The program will show what type of speaker serves a specific socket. As a result, all 3 of the above-mentioned connector on the module must be involved. The columns and subwoofer is connected by the RCA cable - RCA (tulip - tulip), one end of the cable into a subwoofer (since it is most often an amplifier in it), and the other end to the corresponding speaker. On the subwoofer, each RCA output is signed according to the type of dynamics, so you will not be mistaken.

Adjust the computer by selecting the 6-channel mode in the Sound Card Driver Application and in the Windows Sound Control Panel. If you have an acoustic system 7.1, then you will have to additionally use a gray connector on the motherboard for lateral speakers. In the extreme case, use the manual to the motherboard, especially when connecting the headphone and microphone connector on the front panel of the system unit of your PC.

When connecting acoustics 5.1 via SPDIF, you will need a SPDIF cable (optical or coaxial).

The inputs and outputs of coaxial SPDIF are made on RCA type connectors. The digital signal is transmitted by a typical cable with the corresponding connectors. In coaxial SPDIF, the data is transmitted in the form of electrical pulses along ordinary wires that are subject to all sorts of tips. In the receiving device, all these tips are filtered off, but the probability of losing part of the data is still present.

Optical SPDIF uses optical cable to transmit data. Its inputs and outputs are made on Toslink connectors, which are closed with plugs, for which it is very easy to find out this type of interface. Also in Creative sound cards and not only the optical interface that uses the MINI Toslink cable is also found. The optical cable does not respond completely to magnetic fields, since the data is transmitted as light pulses. Therefore, it is believed that the optical transmission interface of digital data is much better protected from external influencethan coaxial. IN satellite receivers The optical view of the SPDIF interface is used.

Connection type will depend on what type of connection interface external sources The signal is available on the enhancer body of your speaker system. It is enough to connect the cable to the digital output of your motherboard and connect it to the corresponding input digital connector on the speaker system (amplifier or subwoofer acoustic system with a built-in amplifier). You must change the audio code output port in the analog on digital interface (unless of course the driver does not determine the connection to digital output). The connection diagram of directly columns remains the same as described above. Greaging the sound directly without various compression so you still fail to get more stereo sound from the game on S / PDIF. To correct this deficiency, you should have a sound card that supports Dolby Digital Live or DTS Connect. These technologies allow a raid to encode multichannel sound from the game 5.1 or 7.1 in digital Dolby Digital or DTS and transmit directly via S / PDIF. In practice, when you turn on one of these technologies, all the sound that is played on analog outputs will be recoded and sent to digital S / PDIF True, often in order for the sound to play exactly at an analog output. You will have to put analog outputs of a sound card as a default device in the settings panel windows audio, For many applications, simply select analog outputs manually. For example, in normal mode, the S / PDIF device is selected in the Windows S / PDIF settings panel as the default device. The music player also shows S / PDIF. Now, to get the sound 5.1 from any source follows:

• select one of the audio coding technologies 5.1 Dolby Digital Live or DTS Connect in the sound card settings;
• in the Windows Sound Settings panel, select the main device analog audio card outputs;

Misception number 1. When you finished playing, you should switch everything back for correct operation. If you keep one of the coding technologies of the raid always on, you will not be able to view and listen to files with multi-channel sound, as they are already encoded and require an output directly to S / PDIF.

Solution: Not required to switch, see the movie in stereo - declined to 5.1, watch the video with the DTS or Dolby path - the sound is perfectly folded through the channels. It can be noticed even on a player that can switch sound tracksFor example, The KMPlayer.

Misception number 2. Coding Rock Stereo Sound from MP3 file using Dolby Digital Live or DTS Connect will be at times to give the hardware decomposition of such sound on columns or receiver.

Solution: If the receiver will be connected by the acoustics of the same quality, then the difference will not be so significant. The main thing in the THX Studio Pro settings (or similar "enhancer" sound card) Do not forget to disable the options that create different effects: for example, it highlights a voice on a common sound background. Much depends on the audio card, Creative Titanium HD copes with this "with a bang."

How to connect speakers to TV (active)

1. Through 2 RCA-RCA cables (tulip - tulip), some ends in L and R outputs, others in the speakers, if the speakers on the rear panel of the RCA inputs.
2. If only a cable with mini Jack on the end leaves from the speakers on the end, then connect the headphone jack on your TV.
3. You are going to connect a fully music center, then with the help of RCA-RCA cables in L and R, the TV outputs, set the AUX mode to music center And connect the RCA cable to the AUX input on your center's rear panel. If the sound output in the view of the MINI JACK socket (black, as a rule), you will need a mini jack cable - 2 RCA.



How to open the VCF file on the computer

Many PCs are already equipped with speakers, but usually the low quality and volume of sound cause users to acquire individual columns or even speakers.

Below is the manual as independently and at the same time correctly connect this equipment to a computer running on the operating room windows system 7.

Options

Currently, on sale, except for ordinary computer speakers, there is a huge variety of acoustic systems. However, if in the first embodiment rarely arise with the connection with the connection, then in the second there are some nuances.

The main thing before to purchase columns, the user should definitely clarify specifications Installed in PC Audio Carts.

In addition to standard pairs of stereo speakers, the following options are very popular among computers:

1. Normal pair of columns;
2. PC connected to USB connections;
3. Via bluetooth;
4. Acoustic system (5.1, 7.1).

Standard option

An ordinary stationary PC or a laptop is always equipped with a special green connector (regardless of the manufacturer of a computer and its component parts, the color is always the same, that is, corresponds to the global standard), in which the plug from the speakers is inserted.

Thus, in the case of using a pair of speakers of the system 2.0 or even complete with a subwoofer, the wire from them should simply connect to the green sound card connector.

The procedure consists of the following steps:

In most cases, the "seven" is already immediately after a moment after connecting the speakers displays a message on the new equipment found on the monitor. You can only use this automatic alert and configure the sound.

Sometimes "Windows 7" does not see the column and the screen does not display the above menu. In this case, you must independently perform the following several actions:

Compound columns with PC via USB

Before connecting, you must install the drivers for sound reproducing equipment.

If included with the device there is a software disk, then install it optical drive, make installation software.

Otherwise, in the absence of a disk, it will be necessary to name the column model first to find suitable drivers in global Network And by downloading them, install them.

Then restart the computer, and only after that it will be possible by connecting the device to one of the USB ports, start setting up the sound.

In the case when the software was installed correctly, then the OS in automatic mode Recognizes new equipment, and it will be ready for use.

Via bluetooth

If the computer has a bluetooth adapter, then you can choose and convenient option "without wires". To do this, only a few steps should be performed:

1. Click on the speaker's power button. Usually, their successful launch is evidenced by the light bulb on the dynamics body;
2. Next, activate the bluetooth adapter in the computer and wait for the completion of the Bluetooth equipment search process;
3. Then in the list of devices click on the name of the columns and click "Connect";
4. Ready. If everything is done correctly, the light bulb is usually started on the speakers or it changes its color.

Of course, it will be a little more difficult for owners of more advanced acoustic systems with multiple speakers, for example, 5.1 or 7.1. At the same time, only one standard linear entrance to the PC is not enough.

Speaking simple wordsIf the equipment is planned to use 5.1, then besides the green connector, two more should be present: orange and black. And if you have "7.1, you will have to purchase an external audio card.

But the algorithm of connection will be almost the same, the main thing, after performing a wired connection of the columns among themselves and with the sound card of the PC, do not forget to supply power to the speakers through the outlet and turn them on by clicking on special button.

How to connect and appease columns?

In this article, we will talk about connecting acoustic systems to sound power amplifier (UNG).

If you find an old Soviet amplifier and columns in the balcony in your balcony, then do not hurry to throw them out. By connecting all these rarities to the linear output of the computer, you can get quite good results with a practically for nothing.

The disadvantage of many Soviet amplifiers had unsuccessful schemes of tone regulators. When used as a source of a computer signal, you can easily compensate for this disadvantage using a software equalizer that has any audio card.

A few words about the power of acoustic systems.

The columns (acoustic systems) differ in the magnitude of the signal output signal. Distinguish between the nominal, maximum and peak power. Peak power is sometimes called maximum short-term power and even negotiate its exposure time.

It must be said that the value of the power of the column, due to the importance of this parameter for a large group of music alphas, is interpreted differently by marketers. Often in marketing purposes, maximum permissible power is greatly overestimated.

As for the Soviet columns, the value of the maximum power supply to them can be found in the accompanying documentation or here.

The documentation usually indicates two parameters, nominal and passport power.

Rated power, this is the resulting signal power, in which the speaker system can work for a long time without significant distortion.

Passport power, this is the resulting power of the signal at which the AU, allegedly, can work limited time. In fact, use this parameter for practical purposes is rather problematic if it concerns multi-band acoustic systems.

Judge yourself. For example, at your disposal there is a 2x100 watt sound amplifier with a load of 4 Ohm and once popular columns 35as (S90) 4 ohform resistance with a passport power of 90 watts.

If such an amplifier is connected to a computer and using an equalizer to send all the power of the signal to high-frequency speakers (sakes), the power of which is only 10 watts with a resistance of 8 ohms, it turns out that we can direct the power of about 50 watts into the dynamic head calculated on the rated power. Total 10 watts and passport, let's say, 20-30 watts. In other words, in this situation, only a miracle can save "sakes" from destruction.

The golden rule of connecting the columns is that the power of the columns in any case exceeds the power of the amplifier and the more excess, the better for the speakers.

Multibone acoustic systems.

Acoustic systems differ in the amount of frequency bands, which are separated by the output signal of the amplifier.

In single-band speakers, the entire output signal of the amplifier is supplied to one or more identical speakers.

In two and three-band columns, the amplifier signal is divided by passive filters that are inside the column housing. In such systems, dynamic heads are used for reproducing a specific sound frequency band.

The speakers are divided into four groups: high-frequency, mid-frequency, low-frequency and broadband. By their name, you can guess what frequency range they are reproducing.

There are also multi-band acoustic systems that do not contain dividing strip filters. For such systems, the signal is required already separated on the corresponding bands of the strip. In such cases, multi-band amplifiers or external filters (crossovers) are usually used.

Connecting columns.

In the simplest, but often encountered case, the signal from the amplifier is fed to the column along a two-pole cord. The cord has either the connecting connection with the columns is either indefinite.

The connector connection may look different, but in any case, the terminals are somehow marked. If the label "+" is missing, the plus is considered the red color of the terminal.

On the opposite side, the cord, or must have a plug for connecting to the amplifier, or simply curtain ends if the amplifier is equipped with special clamping terminals.

Soviet columns were connected to the Soviet amplifiers with three types of forks.

The picture shows forks in the order of appearance in the trading network.

Five hundred plug (sometimes three-grayscrew similar design);

A two-pole fork designed for a barrel with mechanical fastening;

A two-pole plug for nockets intended for printed mounting.

The plugs of the type "2" differed from the forks of the type "3" by the fact that one of the contacts they had in short and, in some cases, it led to the fact that they did not provide reliable contact with the sockets intended for printed mounting.

When connecting columns to the amplifier, the connection polarity should be observed.

Purpose of conclusions (pinout) forks.

"Corpus" - Connects to the amplifier housing, which is connected to the shared power wire.

"+" (plus) - Connects to the output of power amplifier.

You can use a multicore two-wire cable, including the network, as a cable. However, it is better to take advantage of a special audio cable that can be found on the radio machine. This cable has one of the wires or painted, or has a labeling, which makes it easy to observe the polarity of the connection.

Connecting the amplifier to the column.

The figure shows the scheme for the correct connection of the low frequency amplifier to the speaker system.

The red arrow indicates the direction of movement of the diffuser of the low-frequency dynamic head, with a positive high-wave voltage at the output of the amplifier.

If you connect the battery instead of the amplifier, then you can easily spare acoustic systems, in case the cable is not marked, and there is no cable for cable.

We refine the radio engineering S-90 (35as-212) Passport power ... 90 W

Rated power ... 35 W

Nominal electrical resistance ... 4 ohm

Range of reproducible frequencies ... 31.5-20000 Hz

Nominal sound pressure ... 1.2 Pa

Overall dimensions of the ... 360x710x285 mm

Mass of speakers no more ... 30 kg

S-90 is a classic of Soviet column construction. As the manual says, the S-90 speaker system is designed for high-quality reproduction of sound programs in combination with various types of household radio equipment.

Well, for the beginning of the 80s it was really outstanding columns with high sound quality. However, foreign column construction develops, and now at the beginning of the new century, the S-90 sound is perceived otherwise.

High frequencies sound disgusting, the middle is simply no! And if we talk about bass - then the similar effect will be at the placement of a healthy baswitch in a large barrel ... Bubnate's bottoms on black. Listening to the music of the D & B style, Idm also travels on the ears. What is there to talk about classics and relaxed music. After an hour or two listening, the ears begin to hurt (however, the head and stomach hurts no less). Despite these shortcomings, many buy these columns.

All of the following refer to the Radiotechnika S-90A columns (AC35-212). This is one of the very first issues (and one of the best), characteristic features - 2 regulators on the front panel, the speakers of the RF and the sch are shifted from the center, pair columns, resistance 4 ohms. However, the meaning of refinement and the alteration itself can be easily applied to other S-90 (S-90B, S-90F, etc.), their analogues (orbit, amphiton, etc.), as well as homemade speakers . The main criterion is the presence of 3 bands (speakers) and phase inverter. The finalization of the columns having a closed housing (that is, without a phase inverter) is somewhat different, I will write about it later. And yet - there are many options for refinement, so something I will describe 2 ways. The most suitable will be chosen .. The list of necessary materials will not write - in most cases, everyone uses what this moment Most available.

1) Disassembly

Take one column and put the back wall on the floor (so most convenient to remove speakers). We unscrew 6 bolts that are fixing the decorative plastic lining from the bottom of the column. We unscrew the 4 bolts and remove the decorative nameplates from the speakers and protective grills.

Next will be necessary for a preheated soldering iron! Then we unscrew 4 bolts that are fastening the dynamics and gently approaching one side of it, get out of the housing. We disappear wires (you can, of course, mark which it was precipitated - but it is better to refer to the scheme and solder 100% correctly) and put to the side. We take out the speaker from the housing (it is fastened with a signboard) along with a glass in which it stands. We disappear and put to the LF. We take out HF (squeezing) - she was also fastened with a nameplate and disappear. In the absence of a label on it, one of the terminals (+) we mark what the wire was accustomed, then we look where it goes according to the scheme and find "+". We put to the rest of the speakers.

Neat with diffusers! Dynamics can be taken only for the magnet or support diffusor !!! We unscrew the 4 screw on the phase inverter and gently take it out of the case. It holds on sealing, the main thing is not to apply excessive forces - it can break! We take out 2 "sausages" housing 2 (if it is there). We unscrew and remove the filter from the housing (it can be both on the iron chassis and on a wooden plank). The wires going to it can be bought off with nippers (they are still early to replace). With disassembly everything! Now we need to refine and collect.

2) Refinement of the housing - the rear side of the body is desirable to strengthen with wooden slats (fix on screws and epoxy). It is also necessary to put a wooden strut for the center of the column (between the rear wall and the front) at the level of the sch glass. (The main thing is to pay attention to the ability to then put the phase inverter !!!) It is necessary to reduce the vibrations of the case - turn on the pogrom and attach the hand - the housing goes the walker! It is also necessary to check the tightness of the housing at the joints and, if necessary, wash the joints with epoxy glue or sealant.

3) Filter refinement: you need a scheme.

The meaning is to remove switches from the scheme, replace the wires to the audio from oxygen-free copper, the speakers solder directly to the filter, the supplying wire solder immediately to the filter and reduce the signal path

In the absence of finances, you can put suitable copper from Soviet. The meaning of the selection of the wires is the dynamics of the stranded, cross section of the greater, the better (but not less than 2.5 mm2, and more than 4mm2 are fastened badly), it can be largely a stranded at least 1.5 mm2, and to RF - single-core at least 1 mm2 (I recommend using a veil from the twisted pair of the fifth category by + and to -). It should be said that the selection of wires is thin. There are still fierce discussions about choosing a wire for columns. I express my personal opinion. I advise you not to skit and buy at least the cheapest audio cable! The quality of sound significantly depends on it! Believe the word.

Also, I highly recommend remounting all the filter details on a small plywood / wood, so that it would be for a filter to the bottom column, next to the phase inverter. This is important (especially if the filter is mounted on the iron plate). Fix the inductors of the inductance for a new fee must not be not iron screws, but with something plastic or planted on epoxy. So, we replace all the wires on the filter board - installation we lead immediately to the outputs of capacitors, removing contact plates from them.

Wire replacement sequence will not lead. Just like the prompts where the wires are soldered from the LF, Sch and HF. I hope you'll figure it out :). If you do not cope - invite knowing man (Miffing to distinguish the capacitor from the resistor will fit). As a last resort - email me on e-mail [Email Protected] . The filter was finished - put it aside.

4) Case damping:

The meaning is to absorb and dispel all standing waves inside the case. The criterion for choosing a material is the denser and thicker (felt) - the better absorbs than thinner and easier (syntheps), respectively, worse. It is best to make a pancake - to wash the body with sound-absorbing mastic (car suitable), then glue the felt layer under 1 cm + LF part of another such layer and stick a chaotic pieces of felt. It is also recommended to clamp a layer of material for kitchen hoods - I do not know, I have not seen it. I did it like this - everything is crumpled with felt 1.5 cm + the bottom of another 1.5 + pieces. The sound absorber must be glued throughout the inside of the case. After installing the first felt layer, we recommend putting a filter board at the bottom column (with a shut-off wire) and the phase inverter (otherwise it does not stop it!), The remaining layers of the sound formator laying, closing the filter. And also wrap the phase inverter with a sound absorber (the main thing is not to close the inner section of the pipe and save direct access to the diffuser of the LF to the phaseinverter). It is necessary to watch for internal volume Cases - it is impossible to reduce it to be excessively - will affect the depth of bass! Case finished.

By the way, you wish to find felt advise the economic, thickness under 1.5 cm.

5) Mount Speaker and its glass.

I highly recommend replacing the standard 15GD-11A (or its clone) on a broadband 6-GDSH-5-4 or 6-GDSh-5-8. The difference between them is that the first resistance is 4 ohms, and the second 8th. Accordingly, when installing 6-GDSh-5-8, the filter is not necessary to change, and when installing 6-GDSH-5-4 in the rupture of the wire (no difference, "-" or "+") put the resistor on the 4th large (6-10 W) power. For this, the R3 resistor (4.3 Ohm) is suitable from the sch divider (column 35as212). Do not be afraid to lose power from this replacement! You will only win as a sound. The method is already checked on many S-90, negative reviews No, the power has not decreased. Moreover, competitors for 6-GDSH-5 are still needed (even among foreign analogues). And this is at the cost of a pair of these broadband (new!) $ 4-6. The minus they have only one - appearance. Although I like :).

For sch need to make pass. This means to close the windows of the difugeroger on the reverse side of the dynamics of the Fa Rock layer with a thickness of 0.5-0.8 cm. It will come up and steam batting. It is convenient to cut off a strip of a stroke of a 4-5 cm wide and a long equal to a little less than the perimeter of the speaker, sew and pull on the windows (for 15GD-11A). Then sew threads to supports. Made a pass (be sure to do - it worsens the goodness that almost all of the Soviet Soviet Soviet, used in the S-90 15GD11, even more so!) - You can install a glass and speaker to place. Insert the glass into the housing and wrap it outside in 2-3 layers of good dense sound absorber. It is convenient to cut off the top from the boots, suitable in height and width, put it in the housing, and already put a glass of sch. Inside the glass, it is also necessary to poison the layer of the sound-winder (felt just a time). The meaning of such damping is to eliminate the influence of the HF head. Then it is necessary to put flip-flusted wool in the glass and you can put a speaker in place. Preview the correctness of its phasing.

When connecting a finger battery to 1.5V + K + dynamics, a - k-, the diffuser is retractable forward. Check phasing is important! We solder the wires (+ according to the K + scheme on the dynamics) and put in the housing through the rubber gasket, between the sch and a glass. Rubber 2-3mm thick. It is convenient to use the window rubber insulation made in the form of hollow tubes and with a self-adhesive side.

We put the speaker, we seal the plasticine and screw the flarecom from above, setting rubber gaskets on the screws and the speaker. The protective cutter is better not to put - it spoils the sound. Have you seen good imported speakers with lattices on speakers? When installing 6-GDSH-5 under the signboard on the screws, rubber gaskets with a thickness of about 1 cm will need.

More about the speaker. With the reluctance to put another middle-grade, you can refine the old, for example, so. Although if you have a speaker with rubber, not fabric, suspension - better hide on 6GDSH!

This is a sweet word wool ... It greatly affects both the overall sound and the Bass in particular! So once I reduced her number half. The columns began to produce not bass, but some kind of hum ...

It means that, we cross the pair of gauze bags (35 cm on 35cm) and fill them with cotton from those 2 sausages, which was removed from the body, so that almost all sausages are in the first pouch, in the second less than half the second. Watu flirt. We put these bags in the top of the housing under the socket for

HF and next to the member of the glass. The remaining half of a cotton sausage is waving and simply throw on the bottom of the column, on the filter-baked felt. In my opinion, this is the best location of the wool in these columns.

7) HF head.

Shipping according to the scheme. We put into the housing through the rubber gasket and screw the nameplate from above. The protective cruise is also not set! Uhh ... the hell's work has been done, but it remains very little! We will continue.

8) LF speaker.

We are soldered (it is desirable to verify the phasing, like the sch) and put through the rubber gasket (necessarily!), Screw the bolts, again through rubber washers and sealing the plasticine maker. We put on top of the nameplate.

9) End of assembly.

We put the plastic front, tighten all the bolts and wipe the front panel.

Yes - some little things (rather important!): Wires to the RF and Sch, let go under the sound of the sound-winder, and turn them to the LC; Check the phasing carefully, consider that LF and S-90 are connected in antiphase; Be sure to put speakers on rubber gaskets; Remove all parts from the plates of the disconnected dividers of the RF and SC, and cover them with a sound machine; Do not skimp on the wires; Remove the listers; Do not strangle the volume; The pipe of the phase inverter must be freely communicated with the surface of the dynamics diffuser; Inside the phase inverter, march is clamped - it is needed there; Put the columns on the spikes (for example, so); The connecting cable is better immediately soldered to the filter, it is much cheaper to buy good connector.