Answer

1. You need to know the laptop model, indicated on the sticker with serial number laptop, which is located under the battery or on the back of the case.

2. Download BIOS from the official site

Model input line:

Search results:

Selecting the Windows OS version:

3. Go to the downloads section and select the tab with BIOS files, then check the version of your Windows OS and the BIOS firmware version. It is also necessary to check if your laptop has RAID array(in original specification) - based on this, the BIOS version is selected! The OS version can be checked using the command dxdiag... Press the key combination WIN + R and enter this command there.

There you can also check if you need BIOS firmware or if you already have a similar version. If you have a RAID array from an SSD since the moment of purchase, then you need to flash the BIOS version for RAID, in other cases the ACHI version is flashed. If you are not sure, please contact technical support to clarify.

List of BIOS files available for the selected laptop model:

4. After downloading the archive, you need to unpack the data and copy it to USB stick. You need to extract the folder with the BIOS files from the archive:

Files in folder:

The USB drive must be formatted and converted to the FAT32 file system. All BIOS files must be copied to a ready USB drive in the root folder.

Ready for USB flashing carrier:

5. Firmware process: Video examples: https://www.youtube.com/watch?v=YeXOFWGgW4M http://www.youtube.com/watch?v=mNpcu1DVnZs

1) Turn off the laptop, connect the laptop power cable.

2) Connect the USB drive to the USB 2.0 port (if it is not available in USB 3.0).

3) Turn on the laptop and enter the BIOS using the DEL (DELETE) key.

4) In some laptop models (BIOS versions), the option may be enabled. Secure boot- it can interfere with the firmware. You can disable it in the tab Security, in BIOS menu... In the tab Advanced select item - UEFI BIOS UPDATE. Next, find the required BIOS file (Its name coincides with the version of the downloaded file). After selecting the file, the computer will restart and the file compatibility check will occur (10-15 seconds), a confirmation window will open. Click “Proceed with flash update”. There is no need to change the parameters in this window.

After completing the firmware, you can check the version in the “system information” tab.

BIOS is the firmware responsible for starting Windows. She checks the functionality of components and add-ons. The correct boot of the computer and its normal operation (hardware components) depend on it.

It is recorded on the motherboard and not on the hard drive like the OS. In new devices, BIOS is replaced by UEFI, which performs the same functions, but is improved. Both programs sometimes need to be updated.

BIOS can be updated in several ways

DO I NEED TO UPDATE THE BIOS?

Manufacturers release updates for the laptop regularly. It is downloaded from the official website of the company that made the laptop. It is more difficult for PC owners to build their own. To find the files to update, they will have to rely on the data of the motherboard chip. Any update is also written to the chip, replacing the old version.

It is not difficult to update the bios correctly, but only materials designed for a specific PC model or board should be used. Each motherboard has a strictly defined type of firmware, and installing the wrong version can lead to malfunctions of the computer or its complete inoperability.

BIOS is a thin program, and therefore it is better to update it only in extreme cases. It does not need to be updated on a normally functioning PC. This is due to several factors:

• It is difficult to flash bios on an asus motherboard or any other, the process requires some skills, the process goes through DOS;
• Improvements will not be noticeable, since the differences between versions are minimal and highly specialized;
• Malfunctions and malfunctions may occur. old version tested more thoroughly than new;
• During work, the power should not be cut off, otherwise the device will stop loading.

But sometimes the BIOS needs to be updated. If you regularly encounter this or that error in operation, go to the device manufacturer's website and check if such an error has been eliminated in the new firmware version. More often on the websites of manufacturers there is such a list. If this problem is really solved in the new version, it makes sense to update the bios on the laptop.

Another good reason to flash BIOS is to install new equipment. If you purchased a new processor that appeared after the release of your motherboard, then it will not be supported by your BIOS. In new versions for firmware, manufacturers add support for new types of processors, and therefore you will have to download such a file and flash the firmware.

It is necessary to update the BIOS as a last resort. But even then, check the specifications of the new version and see if the issues are resolved before upgrading. Based on this, draw a conclusion whether it is necessary to update the bios.

Find out the current version by holding Win + R on the keyboard. In the window that opens, you see msinfo32 for 32-bit OS. Click the Run button. A window will open listing the hardware and OS characteristics of the device. Find the one you need among them.

Sometimes a notification appears that the bios mode is outdated. This means that the BIOS operating mode is outdated, it still works in real, not protected mode. The firmware may not help to solve the problem, but it is not serious and it is not necessary to fix it.

UPDATE METHODS

The update method depends on the computer manufacturer, motherboard model, etc. Most often, each manufacturer has its own instructions for flashing. You can get acquainted with it on the official website of the company.

All modern motherboards or you can update the bios on your computer using any of the above methods. But it is better to choose the latter, as it guarantees the minimum number of errors.

UPDATE ALGORITHM

Update bios asus or any other modern laptop, can be done in any of the three ways described. They have their own nuances, but when carrying out the process using utilities, they are still not difficult.

FROM DOS

A difficult option with great risks. To update bios to windows computer 7 do the following:

1. Find out your motherboard model;
2. On the official website of the manufacturer, download required version firmware;
3. Sometimes there are several of them. In this case, select the one that is intended for installation in DOS mode;
4. Create a bootable USB flash drive with BIOS, DOS and additional utility (it is downloaded on the manufacturer's website or included in the archive along with the firmware);
5. Install a USB flash drive and restart your computer;
6. Specify the media on which the bios firmware of the motherboard;
7. After the flashing is finished, restart your PC.

More precisely, there is no instruction, since it varies for different PCs and boards. Find detailed instructions on the manufacturer's website. However, this method is not recommended.

FROM WINDOWS

It is easy to reflash bios on a laptop in this way. Errors are rare. Popular method.

1. Download the firmware utility. It is different for each manufacturer. Asus bios update software - Asus Update, MSI - Live Update, etc .;
2. Install the program;
3. Run;
4. Find the function online - search for new firmware. In different programs, she is in different groups of teams;
5. Select the required firmware from the list of firmware;
6. Activate download;
7. After downloading, run the flashing and follow the instructions of the program.

The bios firmware of asus, MSI and others in this way is also safe because the program itself selects the appropriate firmware version. In addition, the intuitive interface will help even an inexperienced user to perform the firmware.

FROM BIOS

It is possible to reflash the bios on the laptop from the firmware due to the preinstalled utilities. This is a difficult method, as it differs depending on the model of the motherboard chip, manufacturer, etc. To update the bios on the motherboard motherboard gigabyte, run the pre-installed @BIOS utility, other manufacturers have other programs. Such programs are similar to the utilities used in the previous method, but not so convenient. They also work with them - they find the necessary file on the network and launch it.

Most often, the method is used in case of computer breakdowns, when it is impossible to enter the OS, because PC won't boot.

BIOS is a familiar abbreviation, the meaning of which is not familiar even to many sophisticated and experienced personal computer users. For most of them, it is associated with a gray-blue interface in the style of MS DOS or Windows 3.1, but many may not tell you about its functionality. Most of the knowledge of the average user is, at best, limited to the fact that the BIOS is system settings computer or something like that, because it is rather difficult to give an exact answer. This complexity is quite justified for itself - a personal computer is not easy for an ordinary person to understand when it comes to fast and productive work in any industry, and understanding the basic mechanisms of its functioning and, moreover, each of its components seems almost impossible - in practice, this knowledge borders on erudition and are not useful in most situations.

So, BIOS is an input / output system that stands between the hardware and software (together with the user) and allows the computer's resources to be used as intended. It has a read-only memory module that contains a number of data on the configuration of the equipment, including the time - all owners of old computers have faced battery replacement and could hear that it powers this particular component. An important feature of the BIOS is that the capabilities of other hardware located on the motherboard directly depend on its capabilities.

But for most PC users, all of these technical moments are unimportant, but a practical need for those actions is necessary, with the implementation of which they may also face. These include, for example, replacing an outdated processor with a newer and more productive model: support motherboard at the software level, it directly depends on whether the BIOS is "friendly" with it. They may not add compatibility right away: if the slot for the processor (Socket) cannot be changed, then it is possible to create the necessary conditions for the functioning of a suitable hardware model, and the creators of motherboards for the most part take care of ensuring compatibility.

Why Flash BIOS?

As it became clear from the above, the BIOS provides joint work all components located on the motherboard. In particular, we are interested in the processor and RAM: their capabilities are developing at the fastest pace and require the release of motherboard models with an appropriate speed. But this practice is not very profitable and the creators decided to leave a reserve for the future, leaving the user with the opportunity, within certain limits, to improve the compatibility of the motherboard with the hardware on his own. This was the reason for the appearance of the BIOS flashing procedure on personal computers, which allows you to get rid of many problems with it.

It is worth noting that the procedure is quite dangerous compared to other actions with a PC: if the light is turned off at the time of rewriting (rarely, but it happens), everything cannot be restored in any way and the motherboard can be put off somewhere else or simply thrown away. But in frequent cases, such a procedure is still necessary, it brings support not only for new components, but also tools for working with new equipment - old motherboard models that do not support flashing via USB devices got this opportunity thanks to the compatibility package included in the firmware. for similar equipment. The flexibility of a computer in its capabilities is invaluable, and in cases where the firmware is still needed, do not be afraid of the high complexity of this process - if all procedures are performed correctly, the risk of harming the computer is minimal, and the process can often take only a few minutes, but it is worth talking about it in more detail.

Often, the manufacturer himself can recommend a flashing - this may be due to a number of shortcomings that they did not manage to notice and / or eliminate during the production phase. For many PC owners who own one of the new series of motherboards, this practice is not something unfamiliar - for objective reasons, this happens very often.

Which motherboards need to be flashed with their BIOS?

An important feature of this whole story is the fact that there are still only three companies in the world that are engaged in the production of the software part of any input-output system. It will become intuitively clear to many that this increases the chances of each individual model for flashing, and in fact it turns out to be so: no matter what the manufacturer of your motherboard is, with a high degree of probability (which tends to a hundred percent), this procedure is possible for you. But it should be added that the same company is engaged in the delivery of updates and it is not in its commercial interests to invest large funds in increasing the efficiency and capabilities of old models - then there is simply no need to buy new ones.

The theoretical possibility of replacing the firmware is included in any BIOS - at the heart of the device is a memory module designed for approximately 1000 rewriting cycles. But the release of the firmware will be completely on the conscience of the motherboard manufacturer.

It is quite simple to check such a possibility: you just need to know the manufacturer and the model of your device and its model (if not, then welcome to the next section of the article). We go to its official website (that ASUS, that MSI, ASRock and others have their Russian-language versions) and follow the page dedicated to your version of the device. There, in one of the tabs, a category with all released firmware for this component will be available, as shown in the example of the official ASUS website below.

On the websites of other companies, the procedure is approximately the same - in the corresponding section all possible options for BIOS updates, since in the models of different manufacturers they differ in the process almost completely and the skill of flashing one component cannot guarantee knowledge of the subtleties in another - here it is worth carefully studying the ones offered on the network step by step guides or ideally the manufacturer's own documentation. There are also a lot of video flashing on the network: there are relatively few models of motherboards, but out of those hundreds or thousands of users who faced the problem, at least one decided to record a video - all you need to do is search on video hosting sites. Viewing the process from the outside will deprive the subconscious fear of “breaking something” and will help to understand the essence of this or that stage.

Determining the motherboard model

Many find it difficult to determine the model of their motherboard - as with other knowledge of a similar plan, there is one and the same problem: there is no urgent need to memorize or memorize an intricate set of letters and numbers, and this does not help in everyday tasks. Referring to the documentation or looking for a box is also not an option - many tend to lose such things when moving, take them somewhere for storage, or simply forget about them. Also, this problem may arise for those who bought a PC "hand-held", although in the store when selling the assembled system unit boxes from some devices also have a habit of not giving, and buyers are reluctant to take them with them.

There are four ways to understand which model you have "motherboard". Of these, three involve the use of utilities, and one - direct access to the board. The latter will not work if you have a laptop: it is not recommended to disassemble them for a non-professional, and the pros do not always cope - the maintainability of modern solutions is mediocre. The same applies to All-in-One PC and any other solutions not mounted in a standard system unit. Also, do not do this if your PC is under warranty service: all screws will be covered with seals, which will easily show whether the device was opened. It is not necessary to make any manipulations - the very existence of their damage is already a sufficient reason for refusing warranty service, which is clearly spelled out in the conditions of any such company.

If nothing prevents you from opening the system unit, it unscrews two / three / four, or, more simply, all the existing bolts and remove the cover from the side. Our eyes will see a motherboard, on the surface of which a sticker will be waiting for you.

That's all: remember or rewrite the model, do all the manipulations with the lid in reverse order.

In the case of checking programmatically, the command line, which is available in any version, can also help. operating system companies from Redmond. After opening it, you will need to type two commands there, activating each by pressing Enter.

wmic baseboard get Manufacturer wmic baseboard get product

The first will provide information on the component manufacturer, and the second - on the model. If you do not want to deal with the command line and disassembling the system unit, then the AIDA64 (formerly Eevrest) and msinfo32 utilities can be a quick alternative. It is worth downloading their free versions from the official sites - the full functionality will most likely not be useful to you, but there is always a chance to catch a virus. In AIDA64, you just need to go to the "Motherboard" section from the start window, and in msinfo32 - to the System Information tab and read the data opposite the Motherboard item.

For Linux-based systems (including Ubuntu, Linux Mint and the like), you need to activate the command dmidecode.

There, among all the data, you must select the items Manufacturer and Product Name.

Do I need to back up my BIOS?

You need to understand that firmwares for BIOS are created by people, and the array of information for well-coordinated interaction must be clearly calculated, and all points must be clearly planned. And if in theory this is possible, then in practice this does not always happen: there is a high probability that flashing this system along with a number of improvements can bring a number of problems with the PC into your life, so it is still worth protecting yourself in case of such an opportunity.

Manufacturers themselves do not provide such an opportunity, allowing only more than one firmware version to be written to the media and then used. But this does not always happen, since no one expects an unfavorable outcome by undertaking such an operation.

Such opportunities are provided by third party program called Universal BIOS Backup ToolKit. This product was made by an enthusiastic programmer from China back in 2008 and works perfectly on operating systems. Windows family with versions from XP to 8.1 inclusive. An important feature of this program is its well-coordinated work: the backups are correct, the probability of damage to the final file is close to zero, and the software works surprisingly efficiently, as for an enthusiast. It is necessary to launch it only by clicking on the right mouse button with a call to the sub-item "Run on behalf of the Administrator" - otherwise, errors in the work simply cannot be avoided.

The only pitfall that an unfamiliar with the question may encounter: most antivirus software recognizes it as malware, which is not true. Of course, they can infect the original file, but even the utility downloaded from the official website cannot will be tested most programs of this class from the first echelon. The reason for this is the specific driver, thanks to which the software has such a unique functionality. In fact, it does not carry any harm, it is only important to download it from a trusted source. The program interface is English, but very simple. A small window contains only a few buttons, the meaning of which will be understandable not only for an experienced user, but even for an inexperienced this issue... In addition to the exit button and the key that invokes the reading of the documentation, the program window has buttons to start copying. After the completion of the process, which takes from one to two to three minutes, an archive in the .rom format will be available in the program folder (or any other one specified by the user), which is a complete copy of your firmware. The size of the memory, which is indicated on the left, is determined automatically, but it is better to double-check it for your motherboard model - in case of a failure, there will be problems and using an incorrect copy will not work due to inevitable errors in the future. The likelihood of its success on the UEFI BIOS is doubtful, but further updates of the program should fix all the shortcomings, and maybe they have already been corrected at the time of reading this article.

General information about firmware via DOS

DOS firmware is one of the safest options for reinstalling software for a given computer node, since all problems associated with the incorrect operation of your operating system are simply excluded. For different models laptops and motherboards on computers there are slightly different variations of the process, although most of them have many similar features and the guide to flashing in this way can be reduced to a universal series of actions that must be taken.

Prepare the media for flashing. This can be a floppy disk or a USB flash drive.

In direct comparison, they are in no way inferior to each other, if we talk about this process, but it is recommended to take out a floppy disk only if the motherboard (or BIOS) does not have support for booting from a USB flash drive. If you nevertheless decide to use a more outdated option, then you should check the floppy disk for integrity by inserting it into the computer, going to "My Computer" and calling the disk check in the properties of the media that appears in the list (in our case, it is a floppy disk). If any errors occur, do not wait for a miracle from a faulty floppy disk - there is a high probability of malfunctions in the process of "uploading" files and incorrect work PC up to breakdown and the need to carry one for repair.

Read the official recommendations given by the manufacturer on the official website. Similar manuals can also be found in the instructions for the motherboard, but the data tend to become outdated and it is quite possible that the same happened in your case.

Also, during the flashing process, you will be prompted to download the files necessary for this, which include, at a minimum, a utility for formatting the media and a firmware file from the list.

Do backup data on the media.

Everything is simple here: if any important data remains on a flash drive or floppy disk (which is unlikely), then it is necessary to save them on the hard disk of the computer: they will not be lost during the firmware upgrade, but removable drive will need to be formatted.

Formatting the disk.

A special utility that runs on behalf of the Administrator will help here. Perhaps this is not in the recommendations, but the launch of any program of a similar plan must be performed in this way, otherwise you can get a large number of"Difficult" problems and the stalled firmware process. You can also format it using built-in tools by clicking on the disk icon in My Computer and selecting the item of the same name. All values ​​should be left by default, nothing needs to be changed. Is it worth doing full formatting? It will take a long time, so it’s better to simply leave the “fast” checkbox on - the effect will be about the same.

Copying the firmware file.

This stage can be carried out both with the help of a utility, and can be done with the help of a regular Explorer, with which we usually perform all operations with files on our computer. An important feature is that there should be no extraneous files on the medium - formatting (point 4) is mandatory, deleting the files is indispensable.

It is worth pressing the restart button (it does not matter, on the case or in the system menu) and at boot home screen press the button to enter the BIOS - Delete. After that, we see a menu where you need to select a boot partition: it will be called Boot. In this tab, you need to change the boot priority from the media and put the first one on which the firmware file is written. After making all the preparations, press the F10 key (save all changes and reboot) and follow the instructions given for your specific motherboard model - here the process may differ significantly.

BIOS update via Windows

The option to update the BIOS firmware via the operating system is provided by almost every motherboard manufacturer: each of them has its own utility that does everything practically automatic mode... Nevertheless, it is worth carefully studying all the instructions so as not to be confused at the most inopportune moment.

As described in the previous paragraphs of this article, you need to go to the manufacturer's website and select your motherboard model. In the accompanying tabs, the corresponding utilities will be available for download along with the firmware files - in most cases, the process is identical even for products from different companies. Next, you need to run the utility (with Administrator rights, of course) and select the firmware method (item "From file" or similar in meaning). Next, we search in file manager place where you saved the archive and press the "Run" button - the program does the rest automatically. The advantage of this method is its simplicity - even a beginner in mastering a PC can handle it. Another thing is whether a newbie needs to flash the BIOS, because, as mentioned earlier, the procedure can damage components and negatively affect the operation of the computer. It is worth noting that the already small probability of a system failure or a power outage is superimposed on a considerable chance of a failure in the operating system itself - despite all its stability, the data software products are extremely complex: even on slightly different configurations, they can behave completely differently, because the number of factors that can affect this is extremely large. It is also necessary to warn users who nevertheless decided on such a move: it is not recommended to launch any programs or leave the browser, torrent client or office document running - any combination can affect the operation of the built-in utility and then contact service center cannot be avoided. The problem is in the OS itself, which has a lot of components and thousands of possible bugs, which take years to fix even for companies like Microsoft.

To tell the truth, firmware using utilities is far from the best idea, and if there is such an opportunity, it is better to use more reliable options: firmware via DOS or via the built-in BIOS toolkit. Such solutions are possibly less simple and economical in time, but they give a much more predictable effect, which cannot be said about the option described above. In cases of firmware using other methods, the number of factors that can negatively affect the process is minimal, and with the inclusion of the operating system with all its shortcomings in the equation, the probability of failures increases by an order of magnitude.

MSI

Unlike even larger market players, this company provides the ability to flash BIOS through any affordable way from those described above. This is convenient, since the system BIOS menu is too tough for many, and some are worried about safety and are ready to play it safe, not wanting to use a utility launched from under the operating system. There is also a variant of firmware via loading into DOS, which is also safe and relatively simple - here the choice must already be made by the user based on an objective assessment of his capabilities and his willingness to minimize or accept the risks.

Whatever the process and whichever method is used, you need to start by determining the model of your motherboard, which can be done in several ways, described earlier in this article. On the official website of the manufacturer, we are looking for our model and download the necessary files, following the instructions. But since there are already three paths themselves, users will clearly not be satisfied with such a simple explanation and will ask to describe the process in detail.

Live Update

Live Update is a utility produced by the company for BIOS flashing and some other similar manipulations. It is worth noting that MSI motherboards are installed in laptops, tablets and other devices - here it will not help and you will have to use other methods. This is due to the fact that during the firmware process, unexpected errors may occur, which will become critical for the operability and functioning of the device.

So, download the utility from the official website and install it (with the launch of the installer with Administrator rights). This will solve the problem of unexpected failures that so often occur in work after a conflict of programs and permissions. Next, start the program and go to the appropriate item (tab). It is also necessary to simultaneously download the archive with the firmware, because the automated version, according to reviews, does not always work correctly and it is better to refrain from using it.

Then, following the menu, we will have to face a warning that calls to close all open programs(which was already mentioned here earlier) and wait for the end of all the actions that the program performs. Then, of course, the PC will reboot and with the help of the same program it will be possible to find out about the overall success of the operation.

There is another version of the program, which offers an automated installation of a firmware update via DOS, which was described in earlier sections of the article. It should be noted that it retains all the advantages of this method and allows an easy and safe installation of a software upgrade. Technically, the program only downloads the archive with the firmware, so the further process does not differ from the "manual" installation, but you no longer need to search for the required version of the motherboard and download the archive - the utility is responsible for all this. On the negative side, you may not need the newest version, but the software will download it, and the largest numbers in the version column do not guarantee the best performance, as we have seen many times in many cases.

MFLASH is a utility from MSI that is built into the BIOS and allows you to install updates directly from the toolkit of this system. In order to exploit it, no additional tricks are needed: just an empty (or better - formatted) USB flash drive and a file with BIOS software downloaded to it. Here, the sequence of actions is slightly different: the first of them should be just downloading the file mentioned above for your model. Then it will be necessary to clear space - the presence of other files is undesirable, although some users speak positively about the success of such an installation.

After rebooting, you will need to enter the BIOS with the Delete button and find the tab with the same name as the utility. Next, you will need to specify the path to the file (disk) and click on the button to start the process. The length of the entire procedure after entering the BIOS is only a couple of minutes maximum, and after rebooting you will get a system that is most likely to work correctly - there is no chance that it may be affected by any software failures.

From under DOS

Also a reliable method that does not involve the system at all and works great when updating software. In order to find it, it will be necessary to peep among the files on the official one that is necessary for installation from under this OS - in the name there at the end there will be a corresponding mark, as in the screenshot. Next, you need to get a floppy disk, check it for errors using the built-in Windows utilities and format in the same place. If there are no errors when checking the disk, then it will be possible to write a file to it - it will become the installation file.

Next, reboot and enter the BIOS with the Delete button. After this has happened, we look for the Boot Device Priority item and put our media in the first place ( Floppy drive). Then press F10, agree to save all changes and wait for the reboot.

After loading the operating system, we will see a black background with fonts in bright colors (or white) - that means we are logged in. We will be prompted to press Y to continue and N to leave this mode. We press the first button, wait a minute and a half and see an inscription about the successful completion of the firmware upload. We remove the floppy disk and reboot the computer, simultaneously entering the BIOS and changing the boot priority again to the hard disk, although with the floppy disk removed and there is no boot disk in the drive, she will do it this way.

Gigabyte

Gigabyte is the third largest motherboard manufacturer in the world, with main facilities and headquarters in China. The company did not previously have such technologies and was just a contractor for large "sharks" of the market such as Asus or Intel, but after "peeping" from them some developments and opening soybean research departments, it quickly turned from an apprentice into full-fledged competitors.

Gigabyte's specialists in BIOS software did not reinvent the wheel: all methods of reinstalling software for this system are as similar as possible and are clearly borrowed from other market players. It is not known for certain whether there are patent wars between corporations, but one thing is for sure: the user wins from such solutions, because all the actions and methods of changing the firmware that Asus and MSI work on also work on the motherboards of the Chinese company - they differ only appearance(purely formal) and the names of the utilities. The company did not come up with something fundamentally new, which had a positive effect on the convenience of such operations.

A positive point is that the company in every possible way contributes to the ease of searching for its documentation, which is not hidden in the bowels of the official website, but is easily achievable within the search results of any system on the first page in several copies.

The company, or rather, its specialists strongly do not recommend carrying out such a procedure, unless you have identified any malfunctions and failures in the operation of the equipment: processor, RAM and other components. In many cases, according to research by the company itself, performance does not improve and degrades, so it is worth carefully considering the advisability of flashing the BIOS.

Also, the manuals pay great attention to the exact definition of the motherboard model, taking into account the revision. Since in lineup Gigabyte has models that are designated the same, but one of them is a re-release of the second, then the firmware (and all other manipulations) may differ, the use of the wrong archive can be reflected in the most harmful way.

It is also worth noting that in the event of a breakdown or any other malfunction that may occur in the event of a flashing of the warranty, the device is not subject to, because this action is fully qualified as a repair. It is also worth considering and it is good that the manufacturer does not keep silent about it.

Q-Flash is the most reliable way to flash BIOS: this utility is built into the system itself and performs its functions perfectly, with minimal predisposition to incorrect firmware. Its operation does not depend on the operation of the operating system, which is an undoubted advantage. The only problem is that not all solutions support this technology - in other situations, much more simple solution there will be a DOS firmware.

Before using the Q-Flash utility, you need to download the most current BIOS version that matches your motherboard model from the GIGABYTE official website. The BIOS microcode file must be written to a medium (floppy disk, flash drive or HDD; file system FAT32 / 16/12).

Since the BIOS microcode update procedure carries a potential risk, it is not recommended to update the BIOS if current version BIOS is not satisfactory. Updating the BIOS should be done very carefully. Incorrect BIOS update may result in system malfunction.

This solution allows you to update the firmware of the I / O system from under the good old operating system such as DOS. It should be noted that the flashing operation must be performed on a system operating normally. Overclocking, understated memory timings, non-standard frequency system bus may lead to the fact that our event will end with a trip to the service center (or a call to familiar gurus). The easiest way is to load the default settings into BIOS SETUP (Load Fail-Safe Defaults main menu item or similar).

The flashing operation must be performed only from under DOS. To boot from a floppy disk, you only need two system files: io.sys and command.com. In any case, neither autoexec.bat nor config.sys should be loaded. In addition, the floppy should contain files with the flasher and the firmware itself.

Run the flasher with the "/?" and you will get detailed instructions to work with her.

Please note that the updated firmware does not always meet the user's expectations. Be sure to save the file with the old BIOS version on a floppy disk (!) In order to be able to reverse your actions in the future. For AWARD BIOS, calling the flasher can be as follows: “awdflash.exe newflash.bin / py / sy”. Where “newflash.bin” is the real name of the file with the firmware, “py” and “sy” are the flags for reprogramming and saving the old BIOS version, respectively. And the last thing: in any case, do not restart or turn off the computer until the flasher has finished working. This will lead to imminent BIOS corruption.

Live Update

Live Update is, perhaps, the simplest solution to problems with the I / O system, because it looks for the necessary microcodes and does almost all the manipulations instead of the user - you don't need to be any expert in this area to use it. First, you need to go to the official website and download the Live Update 5 utility, which will scan your computer and give you a list of necessary updates, with the ability to download them. Click "Click here" and click "Open".

The archive will open, run the LiveUpdate.exe installation file in it and install the Live Update 5 utility in a few steps. After the installation is complete, launch it and click on the "Scan" button, wait a few seconds while the utility searches for updates. The program will display a list of results. We are interested in an update called "MB BIOS". If such an update is listed (usually at the very top), then there is a BIOS update for our motherboard. Download it to your computer by clicking on the "Download" button (arrow). Better to click "Browse", and choose a location to save the update file yourself. For example, I saved it to the desktop. That's it, we now have the BIOS update file, now we can proceed to the next stage. Run the saved BIOS update file and follow the instructions.

There are two options here: the first is probably to write the firmware image to USB stick, and update the BIOS from a USB flash drive (or for firmware, if it is impossible to update from under Windows). But since I did not have a free flash drive, I chose the second option, which, judging by the title, means BIOS firmware from under Windows. Here we need to close running programs and click "Next".

The further process of updating the BIOS is that we simply press any key on the keyboard, and the computer must reboot. Then everything is over - the device has received a new firmware.

ASUS BIOS firmware

ASUS is one of the titans of the computer components industry, which is proving to be market leaders both quantitatively and qualitatively. An important feature of their products is ease of maintenance: for each class of goods there is a utility that searches for drivers or any other useful work - in the case of this company, the implementation of these solutions is at its best. The same happened with updating the BIOS: both options are very convenient and easily mastered by unskilled and inexperienced users.

USB BIOS Flashback is the easiest way to update BIOS on ASUS motherboards. To update, now you only need a USB-drive with a BIOS file recorded on it and a power supply. No processor, RAM or other components are needed anymore.

The list of system requirements for this utility is rather prosaic:

• power unit;
• USB stick FAT16, FAT32 or NTFS (for Intel X79 only FAT16 and FAT32);
• ASUS motherboard based on Intel X79, Z77, H77, Q77, B75 chipset (list of motherboards ASUS boards supporting USB BIOS Flashback technology is presented in the table).

First, you need to download and unpack the BIOS ROM file from the ASUS official website. It is important to understand that getting files from somewhere else is fraught with irreversible consequences and unexpected equipment operation. Next, you should rename the BIOS file as written in the table, and then save it to a USB drive in the root directory:

Model	File name
P9X79 Deluxe	P9X79D.ROM
P9X79 Pro	P9X79PRO.ROM
P9X79	P9X79.ROM
Sabertooth X79	SABERX79.ROM
Rampage IV Extreme	R4E.ROM
Rampage IV Formula	R4F.ROM
Rampage IV Gene	R4G.ROM
P8Z77-V Deluxe	Z77VD.CAP
P8Z77-V Pro	Z77VP.CAP
P8Z77-V	Z77VB.CAP
P8Z77-V LE	P8Z77VLE.CAP
P8Z77-V LX	P8Z77VLX.CAP
P8Z77-V LK	P8Z77VLK.CAP
P8Z77-M Pro	P8Z77MP.CAP
P8Z77-M	P8Z77M.CAP
Sabertooth Z77	Z77ST.CAP
Maximus v gene	M5G.CAP
P8H77-V	P8H77V.CAP
P8H77-V LE	P8H77VLE.CAP
Р8H77-M Pro	P8H77MP.CAP
P8H77-M	P8H77M.CAP
P8H77-M LE	P8H77MLE.CAP
P8B75-V	P8B75V.CAP
P8B75-M	P8B75.CAP
P8B75-M LE	P8B75LE.CAP
P8Q77-M	P8Q77.CAP
P8H77-I	P8H77I.CAP

Then it is worth connecting the USB drive to the USB BIOS Flashback / ROG Connect connector (for boards based on Intel X79 this is a white USB 2.0 connector, for boards on other chipsets this is a USB 2.0 connector marked with color and the inscription USB BIOS Flasback / ROG Connect on the panel Q-Shield) and hold for three to four seconds until the indicator light starts. Next, we are waiting for the completion of the light indication of the USB BIOS Flashback / ROG Connect button, which means that the update was successful.

It is important not to remove the USB drive, power off the motherboard, or press the CLR_CMOS reset button while updating the BIOS. It is also worth remembering that if the USB BIOS Flashback / ROG Connect button blinks for five seconds, then the USB BIOS Flashback is not working correctly. This may be caused by improper installation of the device, an error in the file name, or an incompatible file format - you should check it yourself after a reboot. It is worth noting the company's rather loyal policy regarding problems after updating the firmware: in case of any problems with booting after updating the BIOS, you can contact the local representative of the ASUS service, which, according to the statements of the authors of the documentation, undertakes to help.

AFUDOS utility

This solution is a bit outdated - in motherboards released in the 2000s and 2010s, the EZ Flash utility is the most popular, although the old solution is also applicable for many devices. To start the firmware in a similar way, open the bootable USB flash drive, write the afudos program on it (the afudos.exe file downloaded from the website) and the firmware itself (a file with a type name p5c800b.rom). Then we reboot and when the first picture appears on the monitor, press F2 for laptops or Del for desktop PCs, go to the Boot tab and put the flash drive in the first place, usually for this in the 1st Boot Device item you need to set Removable Device, then press F10 and confirm that we want to save the changes in the settings. After that, the computer will boot from the flash drive, and will display a prompt to work A: \> on a black screen. To start the firmware process, write afudos /ip4c800b.rom and press the Enter key. It should be noted that you do not need to turn off the power or reboot the system during the BIOS update. This can cause serious damage to your system. After completing the BIOS update, the utility will return to DOS, it is worth pulling out the floppy disk and rebooting the system to enter the BIOS menu.

Intel

This method is one of the simplest, as it uses a self-extracting archive and does not require any special skills from the user. After selecting the section dedicated to the motherboard, you need to download the firmware, in our case it is Express BIOS Update and run it with a double click. Then click "Next" in the invitation window, and then - "Yes" to accept the license rules. After - click "Finish". Windows will reboot to start updating the BIOS. During the update process, do not turn off the computer power for 3 minutes. During the reboot process, you will see the BIOS update process. When the BIOS is updated, the computer will boot into Windows. When Windows restarts, a window will appear indicating that the BIOS was updated successfully.

The essence of this method is to create bootable (disks, flash drives, floppy disks) containing the BIOS update. In our case, download this file LF94510J.86A.0278.BI.ZIP

For work, we need firmware files (write down its name on a piece of paper, it will come in handy later) with the XXX.BIO extension and the iFlash.EXE firmware utility. These files are in the archive with the downloaded firmware. Use the iFlash utility that comes with the firmware in the archive. Also useful is the HP USB Disk Storage FormatTool 2.2.3 utility (other versions are possible), but this one at the time of this writing is one of the most stable. It goes without saying that you can't do without MS-DOS files to create a bootable DOS disk. After downloading, all files are unzipped.

Run the utility as administrator HP USB Disk Storage FormatTool 2.2.3. We set the checkboxes as shown in the picture. The path to the folder of the MS-DOS boot device is written in the place where the MS-DOS files were downloaded. (For example, I have this drive C, the Downloads \ win98boot folder. And the Start button. When asked about deleting files, click "Yes".

Upon completion of the process, copy 2 files from the archive with the firmware to the USB flash drive (an example of how they look: IFLASH2.EXE and LF0278P.BIO). And without removing the USB flash drive from the USB port, we restart the computer. We go into the BIOS (F2 button when booting) and set the priority for booting from a USB drive (on the Boot tab, enable booting from USB (Enable USB Boot) and exit the BIOS while saving the settings - F10.

DOS will boot. IN command line enter IFLASH / PF XXX.BIO (or IFLASH2 / PF XXX.BIO) to start the BIOS update process. Then follow all directions. In our example, it will look like this: IFLASH2 / PF LF0278P.BIO

Creating a bootable floppy is an effective method if the utility and firmware are small enough to fit on a floppy, since the floppy is 1.44Mb in size.

For our example, there is no way to visually show the process of creating a bootable disk. So I'll take another firmware file from another motherboard as an example. Insert the floppy disk into the floppy drive and run double tap downloaded firmware file XXX.EXE. Press "y" to extract the required files. The files will be extracted to a temporary directory (temp folder; path C: \ temp). You can also extract files with the usual WinRAR archiver... Double-click the RUN.BAT file and follow the instructions to create a bootable floppy disk.

After creation, restart the computer, set the BIOS to boot from the Floppy disk and exit with the parameters saved - F10. After booting from a floppy disk, a welcome window will appear, press any key. You will see the BIOS update status. When the process is complete, remove the floppy disk from the drive and press Enter to restart the computer.

ASRock Firmware

For motherboards from a Chinese manufacturer, the sequence of actions will also not be very different when flashing: here you also need to format the media and go to the official website for files. Further, the list of actions is also standard and is no different from updating from under DOS from other manufacturers ...

Please download the BIOS update file (WinZip file with .zip extension) from ASRock website, unpack it and save the ASRFLASH.EXE utility and BIOS file to a floppy disk. Next, we boot the system from a floppy disk. At the "A: \" prompt, type ASRFLASH, press the spacebar once and enter the BIOS file name, then press Enter. For example: A: \ ASRFLASH K7S41GX2.00 "Enter". Then you will see the message "Please wait for BIOS loading ROM".

After 30 seconds, you will see the message "Flash ROM Update Completed - Pass", which means that the BIOS update is complete. Remove the floppy disk after BIOS update. Reboot the system and press F2 during boot to enter BIOS setup.

From the Exit menu, select "Load Default Settings" and press "Enter" to continue. Select "Exit Saving Changes" and press "Enter" to exit the BIOS setup utility.

Actions after flashing

It is not necessary to undertake any special "rituals" after the flashing, if it is not provided for by the instructions: it is enough to remove the media that was involved after the flashing and test the operation of the PC with the new software. If you notice any glitches, it makes sense to roll back to the previous version or find another, so that both the support for new components and the stability of the machine do not suffer.

One way or another, many users of computers and laptops, regardless of the OS installed, are faced with the concept of a primary input / output system called BIOS or BIOS. And quite often there is a need to install an update, in particular on MSI motherboards. How to update the BIOS for this particular manufacturer will now be considered. The topic of correcting possible errors that may appear during the installation of new firmware will be separately touched upon.

MSI: how to update BIOS and why do you need it?

Of course, when buying a computer or laptop, no one particularly cares about specifications the motherboard does not penetrate. The potential user is more interested in the processor, RAM, volume hard disk, video card, etc. And not everyone realizes that all these components are installed on the "motherboard", and for the correct operation of all devices, a primary system in the form of a BIOS or UEFI is required.

Nothing is eternal. How device drivers become outdated and constantly require updates, not to mention themselves Windows systems and BIOS system is also not eternal. Let's see how to update BIOS on a laptop (MSI board is used as a basis) or on a stationary computer. Basically, there is not much difference.

General rules for installing firmware

To install BIOS updates, you should clearly understand that an incorrect firmware version or its incorrect installation can have simply disastrous consequences. Therefore, you need to use strictly defined packages designed exclusively for this brand of MSI motherboard. How to update BIOS? First, you need to fulfill a few prerequisites.

How to update BIOS on MSI motherboard: first thing to do

First of all, you need to find out the modification of the "motherboard". The MSI name doesn't say anything yet. To do this, you can use several of the simplest methods.

For example, access to detailed description configurations can be obtained using utilities like Everset, where a description of all devices in the computer system, including the motherboard, will be shown.

However, you can do it even easier, because Windows systems natively have a viewer for all information. To do this, use the msinfo32 command, which you enter in the Run execution console. Moreover, it is absolutely not necessary that it be launched on behalf of the administrator. You can also rummage in the "Device Manager", where you will have to find two identifiers DEV and VEN, and then search for them (by the way, this is the best option).

Required software

Basically, after that you can start installing the update. Note that not all programs for searching and installing driver updates can perform a corresponding search. Therefore, using automated programs like Driver Booster will have no effect here.

This means that you will have to go to the website of the motherboard manufacturer yourself through any web browser. In the browser itself, a special AdBlock blocker may be enabled by default, which should be temporarily disabled.

If the required update is found, you just need to download and install it running at the administrator level. Otherwise, a specialized utility called MSI Live Update can be downloaded from the same site.

MSI Live and "A" drive error fix

Finally, let's see how to update the BIOS. MSI Live Update is not that hard to learn as a program. The most important function here is to start scanning.

The application, by the way, works in the same way as automatic driver updaters, but has a specific focus. After the distribution files are found, you just need to select the version for installation that exceeds the modification available on the computer.

The process itself boils down to the fact that the source distribution is saved on the hard drive, however, it is better to specify the save location manually, since the program uses such a deep path by default that then it can be problematic to find the downloaded file itself. The file itself is an archive from which you need to extract data by any archiver or simply by means of the system. Only after that you can start the executable files, the whole process will take place in automatic mode, after which a complete reboot will be required.

In principle, for updating it is not recommended to use what is proposed to resolve the issue of how to update the MSI BIOS from a USB flash drive. Firstly, you will have to write information to the drive, and secondly, such a device is not immune to failures. As it turns out, the easiest way to update is from a file saved on the hard drive.

After starting the utility, you just need to agree with automatic installation firmware, after which the process starts. Then you just need to wait for it to finish (note: some additional installations may be required in Windows 7).

In the case of "seven", an error of reading disk "A" may be issued. This is normal, especially since floppy drives have not been used for a long time. To fix the problem, enter the settings and select the Standard CMOS Setup section there, where set the value for the Floppy Drive device to Not Installed, save the changes (F10, and then confirm by pressing the "Y" button). This will be followed by an automatic reboot and the problem will disappear completely.

Instead of a total

Actually, that's all about MSI motherboards. How to update BIOS, hopefully, is already clear. Most interestingly, many users are afraid to do this, believing that in this way they can simply harm the system. Nothing wrong with that. As it is believed (this is evidenced by the reviews of many experts), after updating the BIOS, even an increase in performance is often noticed. computer systems... And the update process itself, in general, is not particularly difficult. The most important thing here is to correctly determine the model of the "motherboard" and download for it exactly the update that corresponds to it. Well, then, as they say, a matter of technology. Moreover, any user can easily perform such operations, observing several main conditions described above.

fb.ru

How to update BIOS

From time to time, on the websites of motherboard manufacturers, appear updated versions BIOS. This is due to the fact that by the time a new product is released, they do not always have time to develop an optimal firmware for it.

BIOS (Basic Input / Output System) - software implemented in the form of firmware and recorded in the memory of the motherboard. It initializes the operation of computer components and adjusts its operating mode.

In other words, this microcode boots up the computer. It controls the operation of the keyboard, video card, hard drives, various ports and other devices. They also ensure the further launch of the operating system.

Before moving on to the update process, decide on whether you need to update the BIOS at all? If the computer is already working well, then there is no need to update the motherboard firmware. It is needed only for:

1. Expansion of functionality and list of supported devices. For example, such as new processor models.
2. Elimination of errors of the current version, due to which normal operation is impossible. For example, there is no sound on the computer and the reason for this is not in the sound drivers.

Let's make a reservation right away, updating the BIOS is a serious and rather risky undertaking. If the upgrade is not performed correctly or there is a power outage in the process, the motherboard may be damaged. In this case, you may need to carry it to a service center.

In addition, if the motherboard is under warranty, and you decide to reflash it, the warranty will be canceled. Therefore, weigh again which is better: update the BIOS and void the warranty or postpone this action until later, when the warranty period has passed.

If you do decide to upgrade, it is highly desirable that your computer is connected to a UPS (source uninterruptible power supply).

If, after updating the BIOS, the computer does not boot, do not rush to panic. Many motherboards provide a factory reset option. Read more about them in the instructions for your motherboard.

To reset the configuration of the MSI motherboard, the BIOS update of which will be discussed later, use the jumpers on the motherboard. Unplug your computer and short-circuit pins 2-3 to clear CMOS (volatile memory). Do not forget to return the jumper to its original state before turning on the computer (short circuit pins 1 - 2). Attempting to clear the CMOS while the PC is on may damage the system board.

MSI BIOS update

Go to MSI official website, download section. Download the Live Update tool. It is now located at: ru.msi.com/service/download

After starting the program, go to the Live Update tab, check the Manual Scan action, then MB BIOS and click Scan.

If you have the latest BIOS, you will see the following message.

It means: the BIOS of the motherboard has the latest version. There is no need to update.

If, however, Live Update informs about the need to update the BIOS - click on the corresponding icon (download and install) to load the BIOS of the motherboard. After downloading, the installer will automatically start.

In the window that opens, click Next.

The next window will offer 2 ways to update the BIOS. Select In Dos mode (USB) and click Next. How to update the BIOS of the motherboard in the second way - we will consider a little below.

Connect a USB flash drive to your computer to create a bootable disk, then select the required USB drive from the list.

Click on the Next button and confirm the clearing of all data on the USB flash drive by clicking OK.

A bootable USB drive will begin to be created, it will take some time. Upon completion, a message will appear stating that the bootable disk was created successfully.

Click Start to restart your PC.

Make sure that BIOS is configured to boot from a USB flash drive. More about this was discussed in the previous article: Installing Windows from a USB flash drive.

When the computer boots from the USB stick, follow the instructions.

At the stage of choosing the update method, specify In Windows mode, which means in Windows mode, then click Next.

In the next window, close all programs by clicking Close all listed programs and click Next.

By clicking Start, you will start the BIOS replacement process. After it completes, the computer will restart.

If you have a different motherboard - new version Look for the BIOS and information on updating it on the manufacturer's website. Of course, you can use third-party solutions, but official updates preferable.

where-money.com

How to update BIOS of MSI motherboard

BIOS is an essential component of a computer that checks the health of the hardware, allows you to make settings in the computer, and is also responsible for starting the operating system. Over time, BIOS updates may also be released, which makes users want to install them.

Please note that it is not recommended to update the BIOS without a compelling need. If something goes wrong during the update process, you may even lose your computer's performance.

How to update BIOS for MSI motherboard?

Stage 1: motherboard model

First of all, you need to know the model of the motherboard installed in your computer. You can get information in several ways: using the documentation that comes with your computer, by directly studying the surface of the motherboard (it contains a sticker with the information of interest), as well as by a program method, for example, using the AIDA64 program, the download link for which is located in end of the article.

Stage 2: downloading a fresh distribution

The next step we need to download to the computer special utility Live Update, which will allow you to find updates for your BIOS version, and then immediately install it on your computer from under Windows. To do this, go to the MSI motherboard developer website at this link. On the page, click on the "Downloads" button.

In the window that opens, enter the model name of your motherboard and click on the Enter key.

With your motherboard model page open, go down to the page and click on the "Support" button.

Go to the Utilities tab and then select the version of your operating system. Find and download the Live Update utility from the list.

Step 3: Installing a BIOS update

Once the utility is loaded, run it. Put a check mark next to the "MB BIOS" item and, if necessary, remove from other items, and then click on the "Scan" button.

The program will start scanning your computer for updates to the BIOS you have installed. If an update is found, it will be displayed on the utility screen. To start installing it, you need to click on the "Download and Install" button.

The BIOS installer will start automatically. As soon as a new window appears on the screen, select "In Windows mode" and proceed further.

Next, the utility will advise you to close some programs. To close the listed applications, click on the "Close all listed programs" button and proceed further.

Then you just have to start the BIOS update procedure by clicking on the "Start" button. Please note that during the update process, ensure your computer runs smoothly - a sudden power outage can damage your computer.

Actually, once the utility finishes its progress, the BIOS of your MSI motherboard will be updated.

ITCreeper.ru

MSI Russia

Download Live Update 6 Live Update 6 supports the following updates for MSI products:

Motherboards: Drivers / BIOS / Utilities;

Graphics Cards: Drivers / BIOS

DO NOT USE Live Update for AIOs and laptops.

1. After installing and running Live Update 6, the main page of Live Update 6 - - will open. It will display information about the system, including the date of the last scan and the number of items requiring special attention.

2. The page offers two modes of checking objects for the possibility of updating - manual and automatic scanning. Select automatic scan, the system will automatically scan all objects and search latest versions files to update. You can also choose manual mode and indicate the objects that you want to check for the possibility of updating.

3. After completing the check, review the contents of the next column containing the search results. It will list deleted objects and objects for which there are new versions. Click on the icon for details of the item and click on the icon to download and install. You can also select the objects you want to install and click on the button to download.

4. On the (History) page, you will see information about the update history. Click on the icon for details.

5. On the (settings) page, you can set the update reminder period to constantly keep your system up to date. The default frequency of reminders is once a month. The Live Update reminder system will remind you to check the system and update in accordance with the specified period. Click the (Apply) button to save the settings.

6. Live Update 6 reminder will automatically open at the specified time. Select (yes) or (no) to update. Select (remind me later) or never remind) to set up reminders.

7. On the (System Information) page you will see a list of all installed drivers and applications by clicking on the button.

8. By clicking on the [i] button, you can see the MSI website address, and Live version Update 6.

BIOS update instructions:

ru.msi.com

Most of the users will never try to update the BIOS of the motherboard, and this is necessary in very rare cases, plus the step is quite responsible and unreasonably risky.

But it is required in the following cases:

With incomplete microcode on the board (this is due to manufacturers' mistakes in the race of competitors and the premature release of the gadget); - If it is necessary to eliminate problems with the processor or memory.

1. Analysis of the possibility of updating BIOS

Before reinstalling the BIOS on a PC, you need to make sure that this collection of firmware has the ability to update. You can find it out on the official website in the "CPU Support List" section. The official websites of the product contain information about processors and their compatibility with certain BIOS versions. But for this you need to initially know what kind of motherboard you have installed and what BIOS is on the PC at the moment. Checking the revision of the motherboard and BIOS.

To determine the revision of the motherboard:

Look at the special inscription on it; - look at the inscription on the packaging of the motherboard. The latter option is much simpler, but if you still have the box from the motherboard. Since this is a rarity, you often have to use the first item. The user will need to remove the side cover of the PC, but first disconnect it from the network, and find an inscription like "Rev 1.0, 2.0" on the board. This value means revision.
It is much easier and faster to find out the BIOS version. Usually, the Windows + R combination brings up the system information window by entering the text msinfo32. Among the list of information, even the manufacturer of the motherboard, the model of this board and the BIOS version can be found.
When you got all necessary information- look at the manufacturer's page and check the BIOS updates. Most often, the data is provided in English, but modern top manufacturers support the Russian version of the site as well. Tip: If the PC was bought already assembled and it has its own model, then you can find the BIOS on the official website of the manufacturer of your Sis. Block. As a last resort, there you will find a minimum of information, for example, about the parameters of the board.

2. Ways to update BIOS

There are three possibilities for updating BIOS: - from DOS (DOS) Mode, which is in all modern PCs; - from Windows; - Using special software that is produced by the manufacturer and makes it possible to reflash your PC without DOS or Windows, and from the BIOS itself. via DOS This option was used more than 20 years ago, although then only a floppy disk was required for flashing. Today, you will need a disk, or another drive, where the update file will be located: Update.bat, or Autoexec.bat, which is required to start the installation. Prepare the disk or flash drive using special utilities. It will not take much time to update, but in case of an update it is very important that the computer is not turned off or rebooted in the process.

Updating on Windows

The functionality and interface of the BIOS receive at least some serious changes quite rarely, so there is no need to update it regularly. However, if you have collected modern computer but on the mother MSI board an outdated version is installed, it is recommended to think about updating it. The information below is only valid for MSI motherboards.

Depending on how you decided to update, you will have to download either a special utility for Windows, or the files of the firmware itself.

If you decide to update from the built-in BIOS utilities or DOS strings, then you will need an archive with the installation files. In the case of the utility that runs under Windows, you may not need to download the installation files in advance, since the utility has the ability to download everything you need from MSI servers(depending on the selected type of installation).

It is recommended to use the standard methods for installing BIOS updates - built-in utilities or the DOS line. Updating through the operating system interface is dangerous because in the event of a bug, there is a risk of interrupting the process, which can lead to serious consequences up to the failure of the PC.

Stage 1: Preparatory

If you decide to use standard methods, then you need to make the appropriate preparation. First, you will need to find out information about the BIOS version, its developer and the model of your motherboard. All this is needed so that you can download the correct version of BIOS for your PC and make a backup copy of the existing one.

To do this, you can use both built-in Windows tools and third-party software. IN this case the second option will be more convenient, so further step-by-step instruction considered on the example of the AIDA64 program. It has a user-friendly interface in Russian and a large set of functions, but at the same time it is paid (although there is a demo period). The instruction looks like this:

Now download all BIOS update files from MSI official website using this guide:

To perform the installation using the standard method, you need to prepare a USB stick or CD / DVD in advance. Format the media in file system FAT32 and transfer there setup files BIOS from the downloaded archive. Make sure that there are elements with extensions among the files BIO and ROM... Without them, the update will be impossible.

Stage 2: Flashing

At this stage, we will consider the standard flashing method using the utility built into the BIOS. This method is good because it is suitable for all devices from MSI and does not require any other additional work other than those discussed above. Immediately after you have dropped all the files on the USB flash drive, you can proceed directly to the update:

Method 2: Update from Windows

If you are not too experienced user PC, you can try updating through a special utility for Windows. This method suitable exclusively for users stationary computers with motherboards from MSI. If you have a laptop, it is strongly recommended that you refrain from this method, as it may cause it to malfunction. It is noteworthy that the utility is also suitable for creating bootable flash drive to update via DOS line. However, the software is only suitable for updating via the Internet.

The instructions for working with the MSI Live Update utility are as follows:

Method 3: Via a DOS line

This method is somewhat confusing, as it involves creating a special bootable USB flash drive for DOS and working in this interface. It is strongly discouraged for inexperienced users to update using this method.

To create a flash drive with an update, you need the MSI Live Update utility from previous way... In this case, the program itself will download all the necessary files from the official servers. Further actions are as follows:

Now you have to work in the DOS interface. To enter there and do everything right, it is recommended to use this step-by-step instruction:

Updating the BIOS on MSI PCs / Laptops is not that difficult, and there are a variety of options to choose from. the best option for myself.